Texas Instruments X-Loader 1.41 (Sep 1 2010 - 13:43:00) mmc read: Invalid size Starting OS Bootloader from MMC/SD1 ... U-Boot 1.1.4-gcebe815a-dirty (Aug 16 2010 - 10:34:46) Load address: 0x80e80000 DRAM: 512 MB Flash: 0 kB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: KS8851SNL Hit any key to stop autoboot: 3  2  1  0 3659664 bytes read ## Booting image at 80300000 ... Image Name: Linux-3.4.0-rc2-00012-g0b93afd Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3659600 Bytes = 3.5 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.4.0-rc2-00012-g0b93afd (paul@dusk) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #29 SMP Tue Apr 17 00:46:38 MDT 2012 [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4430 ES2.0 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0ff6000 s11456 r8192 d13120 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117346 [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 ro rootwait mem=463M console=ttyO2,115200n8 init=/linuxrc earlyprintk [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 462MB = 462MB total [ 0.000000] Memory: 456284k/456284k available, 17828k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xdd000000 - 0xff000000 ( 544 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdcf00000 ( 463 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0619ecc (6216 kB) [ 0.000000] .init : 0xc061a000 - 0xc0667cc0 ( 312 kB) [ 0.000000] .data : 0xc0668000 - 0xc06f9a98 ( 583 kB) [ 0.000000] .bss : 0xc06f9abc - 0xc0c4dda0 (5457 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:474 [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.001037] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744) [ 0.124908] pid_max: default: 32768 minimum: 301 [ 0.125732] Security Framework initialized [ 0.126037] Mount-cache hash table entries: 512 [ 0.131439] CPU: Testing write buffer coherency: ok [ 0.132812] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.133300] Setting up static identity map for 0x80472d80 - 0x80472df0 [ 0.133422] L310 cache controller enabled [ 0.133422] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.136291] CPU1: Booted secondary processor [ 0.203552] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.203613] CPU1: Unknown IPI message 0x1 [ 0.203765] Brought up 2 CPUs [ 0.203765] SMP: Total of 2 processors activated (4022.78 BogoMIPS). [ 0.212219] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. [ 0.215515] omap_hwmod: l3_instr: _wait_target_disable failed [ 0.229522] omap_hwmod: i2c1: softreset failed (waited 10000 usec) [ 0.242248] omap_hwmod: i2c2: softreset failed (waited 10000 usec) [ 0.254974] omap_hwmod: i2c3: softreset failed (waited 10000 usec) [ 0.267730] omap_hwmod: i2c4: softreset failed (waited 10000 usec) [ 0.270568] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.275115] dummy: [ 0.276123] NET: Registered protocol family 16 [ 0.276733] GPMC revision 6.0 [ 0.276885] gpmc: irq-52 could not claim: err -22 [ 0.281799] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.282043] OMAP GPIO hardware version 0.1 [ 0.282562] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.283233] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.283905] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.284576] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.285217] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.288482] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.289978] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.290130] error setting wl12xx data: -38 [ 0.293457] _omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [ 0.293487] _omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [ 0.293487] omap_hwmod_mux_init: Could not allocate device mux entry [ 0.342742] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.342773] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.351501] OMAP DMA hardware revision 0.0 [ 0.379486] bio: create slab at 0 [ 0.381195] vwl1271: 1800 mV [ 0.383697] SCSI subsystem initialized [ 0.384765] omap2_mcspi omap2_mcspi.1: master is unqueued, this is deprecated [ 0.385345] omap2_mcspi omap2_mcspi.2: master is unqueued, this is deprecated [ 0.385894] omap2_mcspi omap2_mcspi.3: master is unqueued, this is deprecated [ 0.386413] omap2_mcspi omap2_mcspi.4: master is unqueued, this is deprecated [ 0.387756] usbcore: registered new interface driver usbfs [ 0.388214] usbcore: registered new interface driver hub [ 0.388519] usbcore: registered new device driver usb [ 0.399169] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 0.401245] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.402252] twl 1-0048: PIH (irq 39) chaining IRQs 352..372 [ 0.403717] VUSB: 3300 mV normal standby [ 0.404815] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 0.406005] VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 0.407867] VCXIO: 1800 mV normal standby [ 0.408691] VDAC: 1800 mV normal standby [ 0.409698] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 0.410827] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 0.411773] CLK32KG: [ 0.412597] VANA: 2100 mV normal standby [ 0.422424] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 0.437988] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz [ 0.453613] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 0.457458] Switching to clocksource 32k_counter [ 0.509399] NET: Registered protocol family 2 [ 0.509948] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.511199] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.511627] TCP bind hash table entries: 16384 (order: 7, 589824 bytes) [ 0.515441] TCP: Hash tables configured (established 16384 bind 16384) [ 0.515594] TCP: reno registered [ 0.515624] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.515777] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.516387] NET: Registered protocol family 1 [ 0.517395] RPC: Registered named UNIX socket transport module. [ 0.517395] RPC: Registered udp transport module. [ 0.517425] RPC: Registered tcp transport module. [ 0.517425] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.517974] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.630950] VFS: Disk quotas dquot_6.5.2 [ 0.631134] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.632019] NFS: Registering the id_resolver key type [ 0.632843] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.633422] msgmni has been set to 891 [ 0.635101] io scheduler noop registered [ 0.635101] io scheduler deadline registered [ 0.635223] io scheduler cfq registered (default) [ 0.636505] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.639678] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 0.640624] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 0.641204] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 1.425323] console [ttyO2] enabled [ 1.429809] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 1.452362] brd: module loaded [ 1.464416] loop: module loaded [ 1.470794] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.477935] OneNAND driver initializing [ 1.485321] usbcore: registered new interface driver asix [ 1.491333] usbcore: registered new interface driver cdc_ether [ 1.497802] usbcore: registered new interface driver net1080 [ 1.503967] usbcore: registered new interface driver cdc_subset [ 1.510406] usbcore: registered new interface driver zaurus [ 1.516662] usbcore: registered new interface driver cdc_ncm [ 1.523590] usbcore: registered new interface driver cdc_wdm [ 1.529571] Initializing USB Mass Storage driver... [ 1.534942] usbcore: registered new interface driver usb-storage [ 1.541259] USB Mass Storage support registered. [ 1.546630] usbcore: registered new interface driver libusual [ 1.552978] usbcore: registered new interface driver usbtest [ 1.559600] mousedev: PS/2 mouse device common for all mice [ 1.567718] twl_rtc twl_rtc: Power up reset detected. [ 1.573730] twl_rtc twl_rtc: Enabling TWL-RTC [ 1.581115] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 1.588134] i2c /dev entries driver [ 1.593749] Driver for 1-wire Dallas network protocol. [ 1.601013] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 1.618713] usbcore: registered new interface driver usbhid [ 1.624664] usbhid: USB HID core driver [ 1.628692] oprofile: hardware counters not available [ 1.634002] oprofile: using timer interrupt. [ 1.639068] TCP: cubic registered [ 1.642547] Initializing XFRM netlink socket [ 1.647094] NET: Registered protocol family 17 [ 1.651824] NET: Registered protocol family 15 [ 1.656646] Registering the dns_resolver key type [ 1.661743] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 1.669799] ThumbEE CPU extension supported. [ 1.679748] omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0). [ 1.688079] omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0). [ 1.697479] Power Management for TI OMAP4. [ 1.718475] clock: disabling unused clocks to save power [ 1.727050] VANA: incomplete constraints, leaving on [ 1.733612] VDAC: incomplete constraints, leaving on [ 1.741119] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.751892] Waiting for root device /dev/mmcblk0p2... [ 1.886932] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.895568] mmc0: new SD card at address e624 [ 1.901519] mmcblk0: mmc0:e624 SD02G 1.89 GiB [ 1.910003] mmcblk0: p1 p2 [ 1.985046] EXT3-fs (mmcblk0p2): recovery required on readonly filesystem [ 1.992218] EXT3-fs (mmcblk0p2): write access will be enabled during recovery [ 4.216217] kjournald starting. Commit interval 5 seconds [ 4.371307] EXT3-fs (mmcblk0p2): recovery complete [ 4.376403] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode [ 4.383911] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 4.391357] Freeing init memory: 308K [ 4.397644] Failed to execute /linuxrc. Attempting defaults... modprobe: FATAL: Could not load /lib/modules/3.4.0-rc2-00012-g0b93afd/modules.dep: No such file or directory INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Activating swap...done. [ 6.285919] EXT3-fs (mmcblk0p2): using internal journal Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux 2.19.1 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...done. Cleaning up temporary files.... Setting kernel variables ...done. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Debian GNU/Linux wheezy/sid armel ttyO2 armel login: l