Texas Instruments X-Loader 1.47 (Jan 14 2011 - 15:43:28) Starting X-loader on MMC Reading boot sector 212836 Bytes Read from MMC Starting OS Bootloader from MMC... Starting OS Bootloader... U-Boot 2010.06 (Jan 14 2011 - 15:43:45) OMAP34xx/35xx-GP ES2.1, CPU-OPP2 L3-165MHz OMAP3 EVM board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 512 MiB In: serial Out: serial Err: serial Read back SMSC id 0x92200000 Die ID #368000229ff80000016071640902c013 Net: smc911x-0 Hit any key to stop autoboot: 3  2  1  0 smc911x: detected LAN9220 controller smc911x: phy initialized smc911x: MAC 00:50:c2:7e:99:42 BOOTP broadcast 1 DHCP client bound to address 192.168.57.131 Using smc911x-0 device TFTP from server 192.168.57.1; our IP address is 192.168.57.131 Filename 'uImage.37xevm'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## done Bytes transferred = 3227336 (313ec8 hex) ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-3.5.0-rc3-00004-gc354a86 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3227272 Bytes = 3.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.5.0-rc3-00004-gc354a86 (paul@nozomi) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Thu Jun 21 22:23:39 MDT 2012 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP3 EVM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0dfc000 s11520 r8192 d13056 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO0,115200n8 earlyprintk root=/dev/nfs nfsroot=192.168.57.1:/srv/nfs4/rootfs2 nfsrootdebug ip=dhcp init=/bin/sh [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 255MB = 255MB total [ 0.000000] Memory: 246564k/246564k available, 15580k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc05bb450 (5838 kB) [ 0.000000] .init : 0xc05bc000 - 0xc0608d00 ( 308 kB) [ 0.000000] .data : 0xc060a000 - 0xc069d2b0 ( 589 kB) [ 0.000000] .bss : 0xc069d2d4 - 0xc0bf5908 (5474 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:474 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.085906] Calibrating delay loop... 594.49 BogoMIPS (lpj=2322432) [ 0.085937] pid_max: default: 32768 minimum: 301 [ 0.086669] Security Framework initialized [ 0.086944] Mount-cache hash table entries: 512 [ 0.092498] CPU: Testing write buffer coherency: ok [ 0.093170] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.093231] Setting up static identity map for 0x80405718 - 0x80405788 [ 0.095062] Brought up 1 CPUs [ 0.095092] SMP: Total of 1 processors activated (594.49 BogoMIPS). [ 0.117553] dummy: [ 0.119903] NET: Registered protocol family 16 [ 0.121337] GPMC revision 5.0 [ 0.121582] gpmc: irq-20 could not claim: err -22 [ 0.133178] OMAP GPIO hardware version 2.5 [ 0.149719] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.174072] Reprogramming SDRC clock to 400000000 Hz [ 0.174102] dpll3_m2_clk rate change failed: -22 [ 0.176330] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.192840] omap-mcbsp.2: alias fck already exists [ 0.193664] omap-mcbsp.3: alias fck already exists [ 0.198760] OMAP DMA hardware revision 5.0 [ 0.268859] bio: create slab at 0 [ 0.272674] fixed-dummy: [ 0.279205] SCSI subsystem initialized [ 0.282287] usbcore: registered new interface driver usbfs [ 0.282897] usbcore: registered new interface driver hub [ 0.283599] usbcore: registered new device driver usb [ 0.286285] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz [ 0.297943] twl 1-0048: PIH (irq 7) chaining IRQs 320..328 [ 0.298614] twl 1-0048: power (irq 325) chaining IRQs 328..335 [ 0.301300] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353 [ 0.313507] VIO: 1800 mV normal standby [ 0.315948] vdd_mpu_iva: 600 <--> 1450 mV normal [ 0.318206] vdd_core: 600 <--> 1450 mV normal [ 0.321014] VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby [ 0.323730] VDAC: 1800 mV normal standby [ 0.326324] VPLL2: 1800 mV normal standby [ 0.329315] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 0.344146] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz [ 0.359558] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 400 kHz [ 0.368652] Switching to clocksource 32k_counter [ 0.490142] NET: Registered protocol family 2 [ 0.491058] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.493164] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.493652] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.498809] TCP: Hash tables configured (established 8192 bind 8192) [ 0.498901] TCP: reno registered [ 0.498931] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.499267] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.500366] NET: Registered protocol family 1 [ 0.502319] RPC: Registered named UNIX socket transport module. [ 0.502349] RPC: Registered udp transport module. [ 0.502349] RPC: Registered tcp transport module. [ 0.502380] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.503509] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.694183] VFS: Disk quotas dquot_6.5.2 [ 0.694580] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.696319] NFS: Registering the id_resolver key type [ 0.696807] Key type id_resolver registered [ 0.698547] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.699768] msgmni has been set to 481 [ 0.704376] io scheduler noop registered [ 0.704406] io scheduler deadline registered [ 0.704650] io scheduler cfq registered (default) [ 0.708282] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.716033] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 1.349853] console [ttyO0] enabled [ 1.355560] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 1.364746] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 1.373962] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3 [ 1.419097] brd: module loaded [ 1.444366] loop: module loaded [ 1.456665] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.464752] OneNAND driver initializing [ 1.484008] smsc911x: Driver version 2008-10-21 [ 1.498413] smsc911x-mdio: probed [ 1.502441] smsc911x smsc911x.0: eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=smsc911x-0:01, irq=-1) [ 1.513732] smsc911x smsc911x.0: eth0: MAC Address: 00:50:c2:7e:99:42 [ 1.521942] usbcore: registered new interface driver asix [ 1.528503] usbcore: registered new interface driver cdc_ether [ 1.535400] usbcore: registered new interface driver net1080 [ 1.542053] usbcore: registered new interface driver cdc_subset [ 1.548980] usbcore: registered new interface driver zaurus [ 1.555450] usbcore: registered new interface driver cdc_ncm [ 1.563903] usbcore: registered new interface driver cdc_wdm [ 1.570037] Initializing USB Mass Storage driver... [ 1.575866] usbcore: registered new interface driver usb-storage [ 1.582366] USB Mass Storage support registered. [ 1.588714] usbcore: registered new interface driver libusual [ 1.595428] usbcore: registered new interface driver usbtest [ 1.601531] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma) [ 1.611907] mousedev: PS/2 mouse device common for all mice [ 1.620605] input: TWL4030 Keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0 [ 1.636016] ------------[ cut here ]------------ [ 1.640930] WARNING: at /home/paul/linux/drivers/base/dd.c:257 driver_probe_device+0x74/0x1fc() [ 1.650268] Modules linked in: [ 1.653594] [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_common+0x4c/0x64) [ 1.663543] [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_null+0x18/0x1c) [ 1.673828] [] (warn_slowpath_null+0x18/0x1c) from [] (driver_probe_device+0x74/0x1fc) [ 1.684082] [] (driver_probe_device+0x74/0x1fc) from [] (__driver_attach+0x68/0x8c) [ 1.694030] [] (__driver_attach+0x68/0x8c) from [] (bus_for_each_dev+0x48/0x74) [ 1.703643] [] (bus_for_each_dev+0x48/0x74) from [] (bus_add_driver+0x9c/0x228) [ 1.713256] [] (bus_add_driver+0x9c/0x228) from [] (driver_register+0x9c/0x120) [ 1.722839] [] (driver_register+0x9c/0x120) from [] (do_one_initcall+0x94/0x168) [ 1.732543] [] (do_one_initcall+0x94/0x168) from [] (kernel_init+0xf8/0x1c4) [ 1.741882] [] (kernel_init+0xf8/0x1c4) from [] (kernel_thread_exit+0x0/0x8) [ 1.751342] ---[ end trace bbbc65ecd79cf528 ]--- [ 1.759490] ads7846 spi1.0: touchscreen, irq 271 [ 1.767181] input: ADS7846 Touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input1 [ 1.782775] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input2 [ 1.795654] twl_rtc twl_rtc: Power up reset detected. [ 1.801391] twl_rtc twl_rtc: Enabling TWL-RTC [ 1.810272] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 1.818328] i2c /dev entries driver [ 1.826171] Driver for 1-wire Dallas network protocol. [ 1.835205] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 1.843872] twl4030_wdt twl4030_wdt: Failed to register misc device [ 1.850769] twl4030_wdt: probe of twl4030_wdt failed with error -16 [ 1.861877] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk [ 2.252410] usbcore: registered new interface driver usbhid [ 2.258361] usbhid: USB HID core driver [ 2.262573] oprofile: hardware counters not available [ 2.267944] oprofile: using timer interrupt. [ 2.273345] TCP: cubic registered [ 2.276916] Initializing XFRM netlink socket [ 2.281555] NET: Registered protocol family 17 [ 2.286437] NET: Registered protocol family 15 [ 2.291625] Key type dns_resolver registered [ 2.296356] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.316314] ThumbEE CPU extension supported. [ 2.356109] clock: disabling unused clocks to save power [ 2.372558] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.384216] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xd0888000, IRQ: 272 [ 2.573852] mmc0: new SDHC card at address e624 [ 2.581939] mmcblk0: mmc0:e624 SD08G 7.40 GiB [ 2.602447] mmcblk0: p1 p2 p3 [ 4.533477] Sending DHCP requests .., OK [ 4.537658] IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.57.131 [ 4.546051] IP-Config: Complete: [ 4.549560] device=eth0, addr=192.168.57.131, mask=255.255.255.0, gw=255.255.255.255 [ 4.558227] host=192.168.57.131, domain=, nis-domain=(none) [ 4.564605] bootserver=0.0.0.0, rootserver=192.168.57.1, rootpath= [ 4.599639] VFS: Mounted root (nfs filesystem) on device 0:11. [ 4.606781] Freeing init memory: 304K /bin/sh: can't access tty; job control turned off # mount -t sysfs none /sys mount -t debugfs none /debug # echo mem > /sys/power/state # # # [ 5.844818] PM: Syncing filesystems ... done. [ 5.855895] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 5.885253] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done. [ 5.893096] Suspending console(s) (use no_console_suspend to debug) [ 6.022460] PM: suspend of devices complete after 119.293 msecs [ 6.025421] PM: late suspend of devices complete after 2.960 msecs [ 6.030303] PM: noirq suspend of devices complete after 4.852 msecs [ 6.030364] Disabling non-boot CPUs ... [ 7.354492] Powerdomain (core_pwrdm) didn't enter target state 1 [ 7.354522] Could not enter target state in pm_suspend [ 7.356903] PM: noirq resume of devices complete after 2.197 msecs [ 7.360260] PM: early resume of devices complete after 1.800 msecs [ 7.710052] PM: resume of devices complete after 349.700 msecs [ 7.768859] Restarting tasks ... done. # # echo mem > /sys/power/state [ 11.898284] PM: Syncing filesystems ... done. [ 11.903289] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 11.928222] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 11.936004] Suspending console(s) (use no_console_suspend to debug) [ 12.064086] PM: suspend of devices complete after 118.137 msecs [ 12.066833] PM: late suspend of devices complete after 2.748 msecs [ 12.071502] PM: noirq suspend of devices complete after 4.641 msecs [ 12.071502] Disabling non-boot CPUs ... [ 12.435089] Powerdomain (core_pwrdm) didn't enter target state 1 [ 12.435089] Could not enter target state in pm_suspend [ 12.437438] PM: noirq resume of devices complete after 2.167 msecs [ 12.440734] PM: early resume of devices complete after 1.862 msecs [ 12.791595] PM: resume of devices complete after 350.772 msecs [ 12.850006] Restarting tasks ... done. # # # cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:0,RET:499,INA:0,ON:500,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:0,RET:499,INA:0,ON:500,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:0,RET:499,INA:0,ON:500,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:0,RET:499,INA:0,ON:500,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (20) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) core_l4_clkdm->core_pwrdm (24) core_l3_clkdm->core_pwrdm (4) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) neon_clkdm->neon_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) prm_clkdm->wkup_pwrdm (0) cm_clkdm->core_pwrdm (0) # # echo 1000 > /sys/devices/platform/omap_uart.0/power/autosuspend_delay_ms echo 1000 > /s# ys/devices/platform/omap_uart.1/power/autosuspend_delay_ms echo# 1000 > /sys/devices/platform/omap_uart.2/power/autosuspend_delay_ms e# cho 1000 > /sys/devices/platform/omap_uart.3/power/autosuspend_delay_ms # cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:0,RET:711,INA:0,ON:712,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:0,RET:21,INA:0,ON:22,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:0,RET:711,INA:0,ON:712,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:0,RET:711,INA:0,ON:712,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:0,RET:711,INA:0,ON:712,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (17) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) core_l4_clkdm->core_pwrdm (23) core_l3_clkdm->core_pwrdm (4) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) neon_clkdm->neon_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) prm_clkdm->wkup_pwrdm (0) cm_clkdm->core_pwrdm (0) # echo -1 > /sys/devices/platform/omap_uart.0/power/autosuspend_delay_ms ec# ho -1 > /sys/devices/platform/omap_uart.1/power/autosuspend_delay_ms echo# -1 > /sys/devices/platform/omap_uart.2/power/autosuspend_delay_ms # echo -1 > /sys/devices/platform/omap_uart.3/power/autosuspend_delay_ms # echo 1 > /debug/pm_debug/enable_off_mode # echo mem > /sys/power/state [ 57.180297] PM: Syncing filesystems ... done. [ 57.185424] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 57.213653] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done. [ 57.221435] Suspending console(s) (use no_console_suspend to debug) [ 57.349212] PM: suspend of devices complete after 117.700 msecs [ 57.351959] PM: late suspend of devices complete after 2.714 msecs [ 57.356597] PM: noirq suspend of devices complete after 4.606 msecs [ 57.356597] Disabling non-boot CPUs ... [ 57.990234] Powerdomain (core_pwrdm) didn't enter target state 0 [ 57.990264] Could not enter target state in pm_suspend [ 57.992858] PM: noirq resume of devices complete after 2.318 msecs [ 57.996185] PM: early resume of devices complete after 1.860 msecs [ 58.346893] PM: resume of devices complete after 350.616 msecs [ 58.405303] Restarting tasks ... done. # # # # cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:28,RET:813,INA:0,ON:842,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:1,RET:107,INA:0,ON:109,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:28,RET:813,INA:0,ON:842,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:28,RET:813,INA:0,ON:842,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:28,RET:813,INA:0,ON:842,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (20) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) core_l4_clkdm->core_pwrdm (24) core_l3_clkdm->core_pwrdm (4) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) neon_clkdm->neon_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) prm_clkdm->wkup_pwrdm (0) cm_clkdm->core_pwrdm (0) # echo 1000 > /sys/devices/platform/omap_uart.0/power/autosuspend_delay_ms echo# 1000 > /sys/devices/platform/omap_uart.1/power/autosuspend_delay_ms echo# 1000 > /sys/devices/platform/omap_uart.2/power/autosuspend_delay_ms echo # 1000 > /sys/devices/platform/omap_uart.3/power/autosuspend_delay_ms # cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:116,RET:813,INA:0,ON:930,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:12,RET:107,INA:0,ON:120,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:116,RET:813,INA:0,ON:930,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:116,RET:813,INA:0,ON:930,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:116,RET:813,INA:0,ON:930,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (17) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) core_l4_clkdm->core_pwrdm (23) core_l3_clkdm->core_pwrdm (4) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) neon_clkdm->neon_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) prm_clkdm->wkup_pwrdm (0) cm_clkdm->core_pwrdm (0) #