怘€æ€˜€`f3πfÀæűÀ̆ž?`??f?æžf<űž`??đ3ž<3ž<`<f<?˜à?̘à0˜˜fĂđÀ€˜àĂÀ˜àÀ˜ž˜à˜x~ó˜x~đà˜˜˜03à3`?<?`?†žűž~<˜˜33žțž`?àžțž<`<f<?†űæžæž˜33€æ†f0Ì???˜03à

U-Boot 2012.07-00136-g755de79 (Aug 24 2012 - 14:19:44)

CPU  : OMAP4430 ES2.0
Board: OMAP4 Panda
I2C:   ready
DRAM:  512 MiB
MMC:   OMAP SD/MMC: 0
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  3  0 
Panda # 
Panda # loady
## Ready for binary (ymodem) download to 0x82000000 at 230400 bps...
CSending: uImage
Sending: 

Transfer complete
mode, 2(SOH)/4052(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x003f4ff8 = 4149240 Bytes
Panda # 
Panda # 
Panda # setenv bootargs console=ttyO2,230400n8 vram=16M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
Panda # 
Panda # bootm
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-3.7.0-rc3-00559-g276980a
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4149176 Bytes = 4 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.7.0-rc3-00559-g276980a (paul@nozomi) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Wed Oct 31 05:19:06 MDT 2012
[    0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: OMAP4 Panda board
[    0.000000] Reserving 16777216 bytes SDRAM for VRAM
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] OMAP4430 ES2.0
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1144000 s12928 r8192 d15744 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125696
[    0.000000] Kernel command line: console=ttyO2,230400n8 vram=16M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 495MB = 495MB total
[    0.000000] Memory: 488728k/488728k available, 35560k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0703830   (7151 kB)
[    0.000000]       .init : 0xc0704000 - 0xc0754280   ( 321 kB)
[    0.000000]       .data : 0xc0756000 - 0xc07e15e0   ( 558 kB)
[    0.000000]        .bss : 0xc07e1604 - 0xc0d3bfac   (5483 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3695 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.001220] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)
[    0.117034] pid_max: default: 32768 minimum: 301
[    0.117950] Security Framework initialized
[    0.118255] Mount-cache hash table entries: 512
[    0.123382] CPU: Testing write buffer coherency: ok
[    0.124694] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.125244] Setting up static identity map for 0x8051ecd8 - 0x8051ed48
[    0.125335] L310 cache controller enabled
[    0.125366] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
[    0.128753] CPU1: Booted secondary processor
[    0.195465] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.195800] Brought up 2 CPUs
[    0.195800] SMP: Total of 2 processors activated (4022.78 BogoMIPS).
[    0.211914] omap_hwmod: l3_instr: _wait_target_disable failed
[    0.267272] pinctrl core: initialized pinctrl subsystem
[    0.270294] regulator-dummy: no parameters
[    0.271392] NET: Registered protocol family 16
[    0.272918] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.273986] omap-gpmc omap-gpmc: GPMC revision 6.0
[    0.280090] OMAP GPIO hardware version 0.1
[    0.288818] omap_mux_init: Add partition: #1: core, flags: 2
[    0.290374] omap_mux_init: Add partition: #2: wkup, flags: 2
[    0.290527] error setting wl12xx data: -38
[    0.290679] _omap_mux_get_by_name: Could not find signal sys_nirq
[    0.290710] _omap_mux_get_by_name: Could not find signal sys_nirq
[    0.294006] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
[    0.294036] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
[    0.346252] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.346252] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.354553] OMAP DMA hardware revision 0.0
[    0.357238] ARM PMU: not yet supported on OMAP4430 due to missing CTI driver
[    0.384857] bio: create slab <bio-0> at 0
[    0.426879] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
[    0.427551] vwl1271: 1800 mV 
[    0.430297] SCSI subsystem initialized
[    0.431427] usbcore: registered new interface driver usbfs
[    0.431671] usbcore: registered new interface driver hub
[    0.432037] usbcore: registered new device driver usb
[    0.448547] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[    0.450012] twl 1-0048: PIH (irq 39) chaining IRQs 418..438
[    0.451538] VUSB: 3300 mV normal standby
[    0.452514] vdd_mpu: 500 <--> 1500 mV normal 
[    0.454437] vdd_iva: 500 <--> 1500 mV normal 
[    0.455383] vdd_core: 500 <--> 1500 mV normal 
[    0.456756] V1V8: 1800 mV normal standby
[    0.457702] V2V1: 2100 mV normal standby
[    0.458801] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[    0.460113] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[    0.462524] VCXIO: 1800 mV normal standby
[    0.462585] VCXIO: supplied by V2V1
[    0.464630] VDAC: 1800 mV normal standby
[    0.464691] VDAC: supplied by V2V1
[    0.466217] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[    0.467468] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[    0.468994] VANA: 2100 mV normal standby
[    0.469665] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
[    0.485229] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
[    0.501068] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
[    0.516387] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
[    0.520233] Switching to clocksource 32k_counter
[    0.582489] NET: Registered protocol family 2
[    0.584197] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.584625] TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
[    0.588378] TCP: Hash tables configured (established 16384 bind 16384)
[    0.588653] TCP: reno registered
[    0.588714] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    0.588836] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    0.589447] NET: Registered protocol family 1
[    0.590423] RPC: Registered named UNIX socket transport module.
[    0.590454] RPC: Registered udp transport module.
[    0.590454] RPC: Registered tcp transport module.
[    0.590454] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.591247] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.748229] VFS: Disk quotas dquot_6.5.2
[    0.748413] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.750183] NFS: Registering the id_resolver key type
[    0.750457] Key type id_resolver registered
[    0.750457] Key type id_legacy registered
[    0.750549] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.751007] msgmni has been set to 954
[    0.752868] io scheduler noop registered
[    0.752868] io scheduler deadline registered
[    0.752960] io scheduler cfq registered (default)
[    0.754577] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.758056] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[    0.759185] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[    0.759918] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[    1.148193] console [ttyO2] enabled
[    1.150878] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[    1.170257] brd: module loaded
[    1.180816] loop: module loaded
[    1.185546] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.189422] OneNAND driver initializing
[    1.197052] usbcore: registered new interface driver asix
[    1.200317] usbcore: registered new interface driver cdc_ether
[    1.203735] usbcore: registered new interface driver smsc95xx
[    1.207092] usbcore: registered new interface driver net1080
[    1.210449] usbcore: registered new interface driver cdc_subset
[    1.213897] usbcore: registered new interface driver zaurus
[    1.217193] usbcore: registered new interface driver cdc_ncm
[    1.221313] usbcore: registered new interface driver cdc_wdm
[    1.224426] Initializing USB Mass Storage driver...
[    1.227355] usbcore: registered new interface driver usb-storage
[    1.230621] USB Mass Storage support registered.
[    1.233398] usbcore: registered new interface driver usbtest
[    1.237457] mousedev: PS/2 mouse device common for all mice
[    1.243133] twl_rtc twl_rtc: Power up reset detected.
[    1.246612] twl_rtc twl_rtc: Enabling TWL-RTC
[    1.252624] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    1.256713] i2c /dev entries driver
[    1.260620] Driver for 1-wire Dallas network protocol.
[    1.265350] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[    1.270996] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
[    1.274353] omap-dma-engine omap-dma-engine: allocating channel for 62
[    1.277954] omap-dma-engine omap-dma-engine: allocating channel for 61
[    1.333251] omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
[    1.336517] omap-dma-engine omap-dma-engine: allocating channel for 60
[    1.340087] omap-dma-engine omap-dma-engine: allocating channel for 59
[    1.459686] usbcore: registered new interface driver usbhid
[    1.462707] usbhid: USB HID core driver
[    1.465484] oprofile: no performance counters
[    1.469024] oprofile: using timer interrupt.
[    1.471862] TCP: cubic registered
[    1.473693] Initializing XFRM netlink socket
[    1.476104] NET: Registered protocol family 17
[    1.478607] NET: Registered protocol family 15
[    1.481262] Key type dns_resolver registered
[    1.483917] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[    1.493743] omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
[    1.498107] omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).[    1.503448] Power Management for TI OMAP4.
[    1.505828] ThumbEE CPU extension supported.
[    1.524780] clock: disabling unused clocks to save power
[    1.530456] VANA: incomplete constraints, leaving on
[    1.534271] VDAC: incomplete constraints, leaving on
[    1.537780] VUSB: incomplete constraints, leaving on
[    1.542999] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    1.549987] Waiting for root device /dev/mmcblk0p2...
[    1.621734] mmc0: host does not support reading read-only switch. assuming write-enable.
[    1.626251] mmc0: new SD card at address aaaa
[    1.630187] mmcblk0: mmc0:aaaa SD02G 1.89 GiB 
[    1.636291]  mmcblk0: p1 p2
[    2.253692] kjournald starting.  Commit interval 5 seconds
[    2.396209] EXT3-fs (mmcblk0p2): using internal journal
[    2.402954] EXT3-fs (mmcblk0p2): recovery complete
[    2.405578] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    2.409545] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    2.413208] Freeing init memory: 320K
modprobe: FATAL: Could not load /lib/modules/3.7.0-rc3-00559-g276980a/modules.dep: No such file or directory

INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...done.
Activating swap...done.
Cleaning up ifupdown....
Setting up networking....
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux 2.19.1
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...done.
Cleaning up temporary files....
Setting kernel variables ...done.
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.

Debian GNU/Linux whe
Debian GNU/Linux wheezy/sid armel ttyO2

armel login: 
Debian GNU/Linux wheezy/sid armel ttyO2

armel login: root
Last login: Sat Jan  1 00:00:08 UTC 2000 on ttyO2
Linux armel 3.7.0-rc3-00559-g276980a #1 SMP Wed Oct 31 05:19:06 MDT 2012 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@armel:~# 
root@armel:~# %% Start PM consolidated quick test


%% Preparation


root@armel:~# 
root@armel:~# mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@armel:~# 
root@armel:~# mount -t debugfs none /debug
mount: none already mounted or /debug busy
mount: according to mtab, /debug is already mounted on /debug
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# echo -1 > /sys/devices/platform/omap_uart.0/power/autosuspend_dela y_ms
root@armel:~# 
root@armel:~# echo -1 > /sys/devices/platform/omap_uart.1/power/autosuspend_dela y_ms
root@armel:~# 
root@armel:~# echo -1 > /sys/devices/platform/omap_uart.2/power/autosuspend_dela y_ms
root@armel:~# 
root@armel:~# echo -1 > /sys/devices/platform/omap_uart.3/power/autosuspend_dela y_ms
root@armel:~# 
root@armel:~# echo 0 > /debug/pm_debug/enable_off_mode
root@armel:~# 
root@armel:~# 
%% Baseline pm_debug count dump

cat /debug/pm_debug/count
cefuse_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0
always_on_core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0
l4per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
l3init_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
ivahd_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
mpu_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
cpu1_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cpu0_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
tesla_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
dss_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
abe_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
gfx_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:0
l3_dma_clkdm->core_pwrdm (0)
emu_sys_clkdm->emu_pwrdm (0)
l4_wkup_clkdm->wkup_pwrdm (5)
l3_dss_clkdm->dss_pwrdm (1)
iss_clkdm->cam_pwrdm (0)
l3_1_clkdm->core_pwrdm (0)
l3_2_clkdm->core_pwrdm (2)
mpuss_clkdm->mpu_pwrdm (1)
ducati_clkdm->core_pwrdm (0)
l4_ao_clkdm->always_on_core_pwrdm (0)
l3_emif_clkdm->core_pwrdm (5)
mpu1_clkdm->cpu1_pwrdm (0)
mpu0_clkdm->cpu0_pwrdm (0)
d2d_clkdm->core_pwrdm (0)
l3_init_clkdm->l3init_pwrdm (0)
l3_instr_clkdm->core_pwrdm (3)
abe_clkdm->abe_pwrdm (0)
l4_per_clkdm->l4per_pwrdm (10)
l4_secure_clkdm->l4per_pwrdm (0)
ivahd_clkdm->ivahd_pwrdm (0)
l3_gfx_clkdm->gfx_pwrdm (0)
tesla_clkdm->tesla_pwrdm (0)
l4_cfg_clkdm->core_pwrdm (0)
l4_cefuse_clkdm->cefuse_pwrdm (0)
root@armel:~# 
root@armel:~# echo enabled > /sys/devices/platform/omap_uart.2/tty/ttyO2/power/w akeup
root@armel:~#
%% Start retention double suspend/resume UART wakeup test

 
root@armel:~# echo mem > /sys/power/state
[   18.895965] PM: Syncing filesystems ... done.
[   18.905090] Freezing user space processes ... (elapsed 0.01 seconds) done.
[   18.928344] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[   18.951751] Suspending console(s) (use no_console_suspend to debug)
a
[   18.966705] PM: suspend of devices complete after 9.002 msecs
[   18.968475] PM: late suspend of devices complete after 1.770 msecs
[   18.971588] PM: noirq suspend of devices complete after 3.112 msecs
[   18.971649] Disabling non-boot CPUs ...
[   18.974975] CPU1: shutdown
[   18.979064] Successfully put all powerdomains to target state
[   18.979278] Enabling non-boot CPUs ...
[   18.981292] CPU1: Booted secondary processor
[   18.981842] CPU1 is up
[   18.983581] PM: noirq resume of devices complete after 1.708 msecs
[   18.985473] PM: early resume of devices complete after 1.159 msecs
[   19.152008] PM: resume of devices complete after 166.534 msecs
[   19.187438] Restarting tasks ... done.
root@armel:~# 
root@armel:~# a
-bash: a: command not found
root@armel:~# 
root@armel:~# 
root@armel:~# cat /debug/pm_debug/count
cefuse_pwrdm (ON),OFF:2,RET:0,INA:0,ON:2,RET-LOGIC-OFF:0
always_on_core_pwrdm (ON),OFF:1,RET:0,INA:0,ON:2,RET-LOGIC-OFF:0
l4per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
l3init_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (ON),OFF:2,RET:0,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
ivahd_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
mpu_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
cpu1_pwrdm (ON),OFF:1,RET:0,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cpu0_pwrdm (ON),OFF:1,RET:0,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
tesla_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
dss_pwrdm (ON),OFF:1,RET:0,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
abe_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
gfx_pwrdm (ON),OFF:1,RET:0,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:0
l3_dma_clkdm->core_pwrdm (0)
emu_sys_clkdm->emu_pwrdm (0)
l4_wkup_clkdm->wkup_pwrdm (5)
l3_dss_clkdm->dss_pwrdm (1)
iss_clkdm->cam_pwrdm (0)
l3_1_clkdm->core_pwrdm (0)
l3_2_clkdm->core_pwrdm (2)
mpuss_clkdm->mpu_pwrdm (1)
ducati_clkdm->core_pwrdm (0)
l4_ao_clkdm->always_on_core_pwrdm (0)
l3_emif_clkdm->core_pwrdm (5)
mpu1_clkdm->cpu1_pwrdm (0)
mpu0_clkdm->cpu0_pwrdm (0)
d2d_clkdm->core_pwrdm (0)
l3_init_clkdm->l3init_pwrdm (0)
l3_instr_clkdm->core_pwrdm (3)
abe_clkdm->abe_pwrdm (0)
l4_per_clkdm->l4per_pwrdm (10)
l4_secure_clkdm->l4per_pwrdm (0)
ivahd_clkdm->ivahd_pwrdm (0)
l3_gfx_clkdm->gfx_pwrdm (0)
tesla_clkdm->tesla_pwrdm (0)
l4_cfg_clkdm->core_pwrdm (0)
l4_cefuse_clkdm->cefuse_pwrdm (0)
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# echo mem > /sys/power/state
[   21.208435] PM: Syncing filesystems ... done.
[   21.213897] Freezing user space processes ... (elapsed 0.02 seconds) done.
[   21.240844] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[   21.264282] Suspending console(s) (use no_console_suspend to debug)
a
[   21.277801] PM: suspend of devices complete after 7.629 msecs
[   21.279541] PM: late suspend of devices complete after 1.739 msecs
[   21.282409] PM: noirq suspend of devices complete after 2.868 msecs
[   21.282440] Disabling non-boot CPUs ...
[   21.284179] CPU1: shutdown
[   21.285614] Successfully put all powerdomains to target state
[   21.285797] Enabling non-boot CPUs ...
[   21.287841] CPU1: Booted secondary processor
[   21.288299] CPU1 is up
[   21.289978] PM: noirq resume of devices complete after 1.647 msecs
[   21.291778] PM: early resume of devices complete after 1.129 msecs
[   21.456359] PM: resume of devices complete after 164.550 msecs
[   21.491668] Restarting tasks ... done.
root@armel:~# 
root@armel:~# a
-bash: a: command not found
root@armel:~# 
root@armel:~# 
root@armel:~# cat /debug/pm_debug/count
cefuse_pwrdm (ON),OFF:3,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0
always_on_core_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0
l4per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
l3init_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (ON),OFF:3,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
ivahd_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
mpu_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
cpu1_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cpu0_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
tesla_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
dss_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
abe_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
gfx_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:0
l3_dma_clkdm->core_pwrdm (0)
emu_sys_clkdm->emu_pwrdm (0)
l4_wkup_clkdm->wkup_pwrdm (5)
l3_dss_clkdm->dss_pwrdm (1)
iss_clkdm->cam_pwrdm (0)
l3_1_clkdm->core_pwrdm (0)
l3_2_clkdm->core_pwrdm (2)
mpuss_clkdm->mpu_pwrdm (1)
ducati_clkdm->core_pwrdm (0)
l4_ao_clkdm->always_on_core_pwrdm (0)
l3_emif_clkdm->core_pwrdm (5)
mpu1_clkdm->cpu1_pwrdm (0)
mpu0_clkdm->cpu0_pwrdm (0)
d2d_clkdm->core_pwrdm (0)
l3_init_clkdm->l3init_pwrdm (0)
l3_instr_clkdm->core_pwrdm (3)
abe_clkdm->abe_pwrdm (0)
l4_per_clkdm->l4per_pwrdm (10)
l4_secure_clkdm->l4per_pwrdm (0)
ivahd_clkdm->ivahd_pwrdm (0)
l3_gfx_clkdm->gfx_pwrdm (0)
tesla_clkdm->tesla_pwrdm (0)
l4_cfg_clkdm->core_pwrdm (0)
l4_cefuse_clkdm->cefuse_pwrdm (0)
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# ./test_rootfs_access_nonexistent_file__ret_susp
-bash: ./test_rootfs_access_nonexistent_file__ret_susp: No such file or directory
root@armel:~# 
root@armel:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

echo 3000 > /sys/devices/platform/omap_uart.0/power/autosuspend_de lay_ms
root@armel:~# 
root@armel:~# echo 3000 > /sys/devices/platform/omap_uart.1/power/autosuspend_de lay_ms
root@armel:~# 
root@armel:~# echo 3000 > /sys/devices/platform/omap_uart.2/power/autosuspend_de lay_ms
root@armel:~# 
root@armel:~# echo 3000 > /sys/devices/platform/omap_uart.3/power/autosuspend_de lay_ms
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# cat /debug/pm_debug/count
cefuse_pwrdm (ON),OFF:3,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0
always_on_core_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0
l4per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
l3init_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (ON),OFF:3,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
ivahd_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
mpu_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
cpu1_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cpu0_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
tesla_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
dss_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
abe_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
gfx_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:0
l3_dma_clkdm->core_pwrdm (0)
emu_sys_clkdm->emu_pwrdm (0)
l4_wkup_clkdm->wkup_pwrdm (5)
l3_dss_clkdm->dss_pwrdm (1)
iss_clkdm->cam_pwrdm (0)
l3_1_clkdm->core_pwrdm (0)
l3_2_clkdm->core_pwrdm (2)
mpuss_clkdm->mpu_pwrdm (1)
ducati_clkdm->core_pwrdm (0)
l4_ao_clkdm->always_on_core_pwrdm (0)
l3_emif_clkdm->core_pwrdm (5)
mpu1_clkdm->cpu1_pwrdm (0)
mpu0_clkdm->cpu0_pwrdm (0)
d2d_clkdm->core_pwrdm (0)
l3_init_clkdm->l3init_pwrdm (0)
l3_instr_clkdm->core_pwrdm (3)
abe_clkdm->abe_pwrdm (0)
l4_per_clkdm->l4per_pwrdm (4)
l4_secure_clkdm->l4per_pwrdm (0)
ivahd_clkdm->ivahd_pwrdm (0)
l3_gfx_clkdm->gfx_pwrdm (0)
tesla_clkdm->tesla_pwrdm (0)
l4_cfg_clkdm->core_pwrdm (0)
l4_cefuse_clkdm->cefuse_pwrdm (0)
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-bash: ./test_rootfs_access_nonexistent_file__ret_dyn: No such file or directory
root@armel:~# 
root@armel:~# echo -1 > /sys/devices/platform/omap_uart.0/power/autosuspend_dela y_ms
root@armel:~# 
root@armel:~# echo -1 > /sys/devices/platform/omap_uart.1/power/autosuspend_dela y_ms
root@armel:~# 
root@armel:~# echo -1 > /sys/devices/platform/omap_uart.2/power/autosuspend_dela y_ms
root@armel:~# 
root@armel:~# echo -1 > /sys/devices/platform/omap_uart.3/power/autosuspend_dela y_ms
root@armel:~# 
root@armel:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
root@armel:~# 
root@armel:~# echo mem > /sys/power/state
[   43.302124] PM: Syncing filesystems ... done.
[   43.307189] Freezing user space processes ... (elapsed 0.02 seconds) done.
[   43.334655] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[   43.358093] Suspending console(s) (use no_console_suspend to debug)
a
[   43.371673] PM: suspend of devices complete after 7.659 msecs
[   43.373413] PM: late suspend of devices complete after 1.739 msecs
[   43.376281] PM: noirq suspend of devices complete after 2.868 msecs
[   43.376312] Disabling non-boot CPUs ...
[   43.377716] CPU1: shutdown
[   43.379211] Successfully put all powerdomains to target state
[   43.379364] Enabling non-boot CPUs ...
[   43.381408] CPU1: Booted secondary processor
[   43.381805] CPU1 is up
[   43.383453] PM: noirq resume of devices complete after 1.617 msecs
[   43.385253] PM: early resume of devices complete after 1.129 msecs
[   43.550109] PM: resume of devices complete after 164.825 msecs
[   43.585388] Restarting tasks ... done.
root@armel:~# 
root@armel:~# a
-bash: a: command not found
root@armel:~# 
root@armel:~# 
root@armel:~# cat /debug/pm_debug/count
cefuse_pwrdm (ON),OFF:4,RET:0,INA:0,ON:4,RET-LOGIC-OFF:0
always_on_core_pwrdm (ON),OFF:3,RET:0,INA:0,ON:4,RET-LOGIC-OFF:0
l4per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
l3init_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (ON),OFF:4,RET:0,INA:0,ON:4,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
ivahd_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
mpu_pwrdm (ON),OFF:0,RET:3,INA:0,ON:4,RET-LOGIC-OFF:3,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
cpu1_pwrdm (ON),OFF:3,RET:0,INA:0,ON:4,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cpu0_pwrdm (ON),OFF:3,RET:0,INA:0,ON:4,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
tesla_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
dss_pwrdm (ON),OFF:3,RET:0,INA:0,ON:4,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
abe_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
gfx_pwrdm (ON),OFF:3,RET:0,INA:0,ON:4,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:0
l3_dma_clkdm->core_pwrdm (0)
emu_sys_clkdm->emu_pwrdm (0)
l4_wkup_clkdm->wkup_pwrdm (5)
l3_dss_clkdm->dss_pwrdm (1)
iss_clkdm->cam_pwrdm (0)
l3_1_clkdm->core_pwrdm (0)
l3_2_clkdm->core_pwrdm (2)
mpuss_clkdm->mpu_pwrdm (1)
ducati_clkdm->core_pwrdm (0)
l4_ao_clkdm->always_on_core_pwrdm (0)
l3_emif_clkdm->core_pwrdm (5)
mpu1_clkdm->cpu1_pwrdm (0)
mpu0_clkdm->cpu0_pwrdm (0)
d2d_clkdm->core_pwrdm (0)
l3_init_clkdm->l3init_pwrdm (0)
l3_instr_clkdm->core_pwrdm (3)
abe_clkdm->abe_pwrdm (0)
l4_per_clkdm->l4per_pwrdm (10)
l4_secure_clkdm->l4per_pwrdm (0)
ivahd_clkdm->ivahd_pwrdm (0)
l3_gfx_clkdm->gfx_pwrdm (0)
tesla_clkdm->tesla_pwrdm (0)
l4_cfg_clkdm->core_pwrdm (0)
l4_cefuse_clkdm->cefuse_pwrdm (0)
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# echo mem > /sys/power/state
[   45.606933] PM: Syncing filesystems ... done.
[   45.611938] Freezing user space processes ... (elapsed 0.02 seconds) done.
[   45.639343] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[   45.662780] Suspending console(s) (use no_console_suspend to debug)
a
[   45.676300] PM: suspend of devices complete after 7.659 msecs
[   45.678070] PM: late suspend of devices complete after 1.739 msecs
[   45.680938] PM: noirq suspend of devices complete after 2.838 msecs
[   45.680938] Disabling non-boot CPUs ...
[   45.682342] CPU1: shutdown
[   45.683654] Successfully put all powerdomains to target state
[   45.683837] Enabling non-boot CPUs ...
[   45.685882] CPU1: Booted secondary processor
[   45.686218] CPU1 is up
[   45.687866] PM: noirq resume of devices complete after 1.586 msecs
[   45.689666] PM: early resume of devices complete after 1.129 msecs
[   45.854797] PM: resume of devices complete after 165.130 msecs
[   45.890075] Restarting tasks ... done.
root@armel:~# 
root@armel:~# a
-bash: a: command not found
root@armel:~# 
root@armel:~# 
root@armel:~# cat /debug/pm_debug/count
cefuse_pwrdm (ON),OFF:5,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0
always_on_core_pwrdm (ON),OFF:4,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0
l4per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
l3init_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (ON),OFF:5,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
ivahd_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
mpu_pwrdm (ON),OFF:0,RET:4,INA:0,ON:5,RET-LOGIC-OFF:4,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
cpu1_pwrdm (ON),OFF:4,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cpu0_pwrdm (ON),OFF:4,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
tesla_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
dss_pwrdm (ON),OFF:4,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
abe_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
gfx_pwrdm (ON),OFF:4,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:0
l3_dma_clkdm->core_pwrdm (0)
emu_sys_clkdm->emu_pwrdm (0)
l4_wkup_clkdm->wkup_pwrdm (5)
l3_dss_clkdm->dss_pwrdm (1)
iss_clkdm->cam_pwrdm (0)
l3_1_clkdm->core_pwrdm (0)
l3_2_clkdm->core_pwrdm (2)
mpuss_clkdm->mpu_pwrdm (1)
ducati_clkdm->core_pwrdm (0)
l4_ao_clkdm->always_on_core_pwrdm (0)
l3_emif_clkdm->core_pwrdm (5)
mpu1_clkdm->cpu1_pwrdm (0)
mpu0_clkdm->cpu0_pwrdm (0)
d2d_clkdm->core_pwrdm (0)
l3_init_clkdm->l3init_pwrdm (0)
l3_instr_clkdm->core_pwrdm (3)
abe_clkdm->abe_pwrdm (0)
l4_per_clkdm->l4per_pwrdm (10)
l4_secure_clkdm->l4per_pwrdm (0)
ivahd_clkdm->ivahd_pwrdm (0)
l3_gfx_clkdm->gfx_pwrdm (0)
tesla_clkdm->tesla_pwrdm (0)
l4_cfg_clkdm->core_pwrdm (0)
l4_cefuse_clkdm->cefuse_pwrdm (0)
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# ./test_rootfs_access_nonexistent_file__off_susp
-bash: ./test_rootfs_access_nonexistent_file__off_susp: No such file or directory
root@armel:~# 
root@armel:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

echo 3000 > /sys/devices/platform/omap_uart.0/power/autosuspend_de lay_ms
root@armel:~# 
root@armel:~# echo 3000 > /sys/devices/platform/omap_uart.1/power/autosuspend_de lay_ms
root@armel:~# 
root@armel:~# echo 3000 > /sys/devices/platform/omap_uart.2/power/autosuspend_de lay_ms
root@armel:~# 
root@armel:~# echo 3000 > /sys/devices/platform/omap_uart.3/power/autosuspend_de lay_ms
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# cat /debug/pm_debug/count
cefuse_pwrdm (ON),OFF:5,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0
always_on_core_pwrdm (ON),OFF:4,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0
l4per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
l3init_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (ON),OFF:5,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
ivahd_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
mpu_pwrdm (ON),OFF:0,RET:4,INA:0,ON:5,RET-LOGIC-OFF:4,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
cpu1_pwrdm (ON),OFF:4,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cpu0_pwrdm (ON),OFF:4,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
tesla_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0
dss_pwrdm (ON),OFF:4,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
abe_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
gfx_pwrdm (ON),OFF:4,RET:0,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:0
l3_dma_clkdm->core_pwrdm (0)
emu_sys_clkdm->emu_pwrdm (0)
l4_wkup_clkdm->wkup_pwrdm (5)
l3_dss_clkdm->dss_pwrdm (1)
iss_clkdm->cam_pwrdm (0)
l3_1_clkdm->core_pwrdm (0)
l3_2_clkdm->core_pwrdm (2)
mpuss_clkdm->mpu_pwrdm (1)
ducati_clkdm->core_pwrdm (0)
l4_ao_clkdm->always_on_core_pwrdm (0)
l3_emif_clkdm->core_pwrdm (5)
mpu1_clkdm->cpu1_pwrdm (0)
mpu0_clkdm->cpu0_pwrdm (0)
d2d_clkdm->core_pwrdm (0)
l3_init_clkdm->l3init_pwrdm (0)
l3_instr_clkdm->core_pwrdm (3)
abe_clkdm->abe_pwrdm (0)
l4_per_clkdm->l4per_pwrdm (4)
l4_secure_clkdm->l4per_pwrdm (0)
ivahd_clkdm->ivahd_pwrdm (0)
l3_gfx_clkdm->gfx_pwrdm (0)
tesla_clkdm->tesla_pwrdm (0)
l4_cfg_clkdm->core_pwrdm (0)
l4_cefuse_clkdm->cefuse_pwrdm (0)
root@armel:~# 
root@armel:~# 
root@armel:~# 
root@armel:~# ./test_rootfs_access_nonexistent_file__off_dyn
-bash: ./test_rootfs_access_nonexistent_file__off_dyn: No such file or directory
root@armel:~# 
root@armel:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test