Texas Instruments X-Loader 1.41 (Sep 1 2010 - 13:43:00) mmc read: Invalid size Starting OS Bootloader from MMC/SD1 ... U-Boot 1.1.4-gcebe815a-dirty (Aug 16 2010 - 10:34:46) Load address: 0x80e80000 DRAM: 512 MB Flash: 0 kB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: KS8851SNL Hit any key to stop autoboot: 3  2  1  0 3230360 bytes read ## Booting image at 80300000 ... Image Name: Linux-3.5.0-rc4-00007-ga77e1c4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3230296 Bytes = 3.1 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.5.0-rc4-00007-ga77e1c4 (paul@nozomi) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Thu Jun 28 01:30:56 MDT 2012 [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4430 ES2.0 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0fa0000 s11520 r8192 d13056 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117346 [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 ro rootwait mem=463M console=ttyO2,115200n8 init=/linuxrc earlyprintk [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 462MB = 462MB total [ 0.000000] Memory: 456624k/456624k available, 17488k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xdd000000 - 0xff000000 ( 544 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdcf00000 ( 463 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc05bb450 (5838 kB) [ 0.000000] .init : 0xc05bc000 - 0xc0608d00 ( 308 kB) [ 0.000000] .data : 0xc060a000 - 0xc069dc70 ( 592 kB) [ 0.000000] .bss : 0xc069dc94 - 0xc0bf6348 (5474 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:474 [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.124664] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744) [ 0.124755] pid_max: default: 32768 minimum: 301 [ 0.125579] Security Framework initialized [ 0.125885] Mount-cache hash table entries: 512 [ 0.131408] CPU: Testing write buffer coherency: ok [ 0.132446] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.132965] Setting up static identity map for 0x80405ad8 - 0x80405b48 [ 0.133087] L310 cache controller enabled [ 0.133117] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.135803] CPU1: Booted secondary processor [ 0.203216] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.203277] CPU1: Unknown IPI message 0x1 [ 0.203430] Brought up 2 CPUs [ 0.203430] SMP: Total of 2 processors activated (4022.78 BogoMIPS). [ 0.220336] omap_hwmod: l3_instr: _wait_target_disable failed [ 0.227111] omap_hwmod: usb_host_fs: _wait_target_disable failed [ 0.233673] omap_hwmod: aess: _wait_target_disable failed [ 0.236389] omap_hwmod: sl2if: cannot be enabled for reset (3) [ 0.240386] omap_hwmod: mcpdm: cannot be enabled for reset (3) [ 0.245056] dummy: [ 0.246185] NET: Registered protocol family 16 [ 0.246887] GPMC revision 6.0 [ 0.247009] gpmc: irq-52 could not claim: err -22 [ 0.252563] OMAP GPIO hardware version 0.1 [ 0.259674] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.261230] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.261383] error setting wl12xx data: -38 [ 0.264892] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.264923] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.318817] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.318847] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.328094] OMAP DMA hardware revision 0.0 [ 0.357696] bio: create slab at 0 [ 0.359558] vwl1271: 1800 mV [ 0.362213] SCSI subsystem initialized [ 0.363403] usbcore: registered new interface driver usbfs [ 0.363647] usbcore: registered new interface driver hub [ 0.363983] usbcore: registered new device driver usb [ 0.375366] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 0.377716] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.378723] twl 1-0048: PIH (irq 39) chaining IRQs 352..372 [ 0.380310] VUSB: 3300 mV normal standby [ 0.381317] vdd_mpu: 500 <--> 1500 mV normal [ 0.382202] vdd_iva: 500 <--> 1500 mV normal [ 0.383880] vdd_core: 500 <--> 1500 mV normal [ 0.385101] V1V8: 1800 mV normal standby [ 0.385955] V2V1: 2100 mV normal standby [ 0.387023] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 0.388244] VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 0.389587] VCXIO: 1800 mV normal standby [ 0.389648] VCXIO: supplied by V2V1 [ 0.391571] VDAC: 1800 mV normal standby [ 0.391632] VDAC: supplied by V2V1 [ 0.393096] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 0.394317] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 0.395385] CLK32KG: [ 0.396240] VANA: 2100 mV normal standby [ 0.406494] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 0.422058] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz [ 0.437652] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 0.441802] Switching to clocksource 32k_counter [ 0.496398] NET: Registered protocol family 2 [ 0.496978] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.498199] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.498687] TCP bind hash table entries: 16384 (order: 7, 589824 bytes) [ 0.502593] TCP: Hash tables configured (established 16384 bind 16384) [ 0.502746] TCP: reno registered [ 0.502777] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.502899] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.503570] NET: Registered protocol family 1 [ 0.504699] RPC: Registered named UNIX socket transport module. [ 0.504699] RPC: Registered udp transport module. [ 0.504699] RPC: Registered tcp transport module. [ 0.504730] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.505371] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.640258] VFS: Disk quotas dquot_6.5.2 [ 0.640472] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.641418] NFS: Registering the id_resolver key type [ 0.641693] Key type id_resolver registered [ 0.642333] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.642944] msgmni has been set to 891 [ 0.645172] io scheduler noop registered [ 0.645233] io scheduler deadline registered [ 0.645385] io scheduler cfq registered (default) [ 0.646972] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.650360] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 0.651275] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 0.651977] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 1.386077] console [ttyO2] enabled [ 1.390563] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 1.414886] brd: module loaded [ 1.427856] loop: module loaded [ 1.434326] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.441497] OneNAND driver initializing [ 1.452606] usbcore: registered new interface driver asix [ 1.458709] usbcore: registered new interface driver cdc_ether [ 1.465087] usbcore: registered new interface driver net1080 [ 1.471343] usbcore: registered new interface driver cdc_subset [ 1.477966] usbcore: registered new interface driver zaurus [ 1.484100] usbcore: registered new interface driver cdc_ncm [ 1.491149] usbcore: registered new interface driver cdc_wdm [ 1.497131] Initializing USB Mass Storage driver... [ 1.502532] usbcore: registered new interface driver usb-storage [ 1.508850] USB Mass Storage support registered. [ 1.514312] usbcore: registered new interface driver libusual [ 1.520629] usbcore: registered new interface driver usbtest [ 1.526580] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma) [ 1.534637] mousedev: PS/2 mouse device common for all mice [ 1.542907] twl_rtc twl_rtc: Power up reset detected. [ 1.548980] twl_rtc twl_rtc: Enabling TWL-RTC [ 1.556610] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 1.563232] genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 363 [ 1.571594] twl_rtc twl_rtc: IRQ is not free. [ 1.578094] twl_rtc: probe of twl_rtc failed with error -22 [ 1.584228] i2c /dev entries driver [ 1.589843] Driver for 1-wire Dallas network protocol. [ 1.597106] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 1.606262] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk [ 1.668914] omap_hsmmc omap_hsmmc.4: Failed to get debounce clk [ 1.787475] usbcore: registered new interface driver usbhid [ 1.793334] usbhid: USB HID core driver [ 1.797454] oprofile: hardware counters not available [ 1.802795] oprofile: using timer interrupt. [ 1.807952] TCP: cubic registered [ 1.811645] Initializing XFRM netlink socket [ 1.816284] NET: Registered protocol family 17 [ 1.821075] NET: Registered protocol family 15 [ 1.826049] Key type dns_resolver registered [ 1.830718] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 1.844146] omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0). [ 1.853607] omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0). [ 1.853607] Power Management for TI OMAP4. [ 1.866485] ThumbEE CPU extension supported. [ 1.888916] clock: disabling unused clocks to save power [ 1.897430] VANA: incomplete constraints, leaving on [ 1.904022] VDAC: incomplete constraints, leaving on [ 1.910949] /home/paul/linux/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.921478] Waiting for root device /dev/mmcblk0p2... [ 2.004089] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.013153] mmc0: new SD card at address aaaa [ 2.019348] mmcblk0: mmc0:aaaa SD02G 1.89 GiB [ 2.027130] mmcblk0: p1 p2 [ 2.039459] EXT3-fs (mmcblk0p2): recovery required on readonly filesystem [ 2.046630] EXT3-fs (mmcblk0p2): write access will be enabled during recovery [ 3.918579] kjournald starting. Commit interval 5 seconds [ 4.074493] EXT3-fs (mmcblk0p2): recovery complete [ 4.079559] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode [ 4.087036] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 4.094543] Freeing init memory: 304K [ 4.100952] Failed to execute /linuxrc. Attempting defaults... modprobe: FATAL: Could not load /lib/modules/3.5.0-rc4-00007-ga77e1c4/modules.dep: No such file or directory INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Activating swap...done. [ 5.895904] EXT3-fs (mmcblk0p2): using internal journal Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux 2.19.1 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...done. Cleaning up temporary files.... Setting kernel variables ...done. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Debian GNU/Linux wheezy/sid armel ttyO2 armel login: