U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete m - CRC mode, 8(SOH)/4303(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00433ed1 = 4406993 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4406929 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.16.0-rc2-78707-g0a26344 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Fri Jul 25 06:16:54 MDT 2014 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c08bc980, node_mem_map edff1000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 526 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/mach-omap2/omap4-common.c:192 omap4_l2c310_write_sec+0x5c/0x98() [ 0.000000] OMAP L2C310: ignoring write to reg 0xf80 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.16.0-rc2-78707-g0a26344 #1 [ 0.000000] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.000000] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.000000] [] (dump_stack) from [] (warn_slowpath_common+0x68/0x8c) [ 0.000000] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.000000] [] (warn_slowpath_fmt) from [] (omap4_l2c310_write_sec+0x5c/0x98) [ 0.000000] [] (omap4_l2c310_write_sec) from [] (l2c310_enable+0x13c/0x200) [ 0.000000] [] (l2c310_enable) from [] (__l2c_init+0x168/0x1f0) [ 0.000000] [] (__l2c_init) from [] (l2x0_of_init+0x140/0x168) [ 0.000000] [] (l2x0_of_init) from [] (omap_l2_cache_init+0x44/0x9c) [ 0.000000] [] (omap_l2_cache_init) from [] (omap4430_init_early+0x6c/0xa0) [ 0.000000] [] (omap4430_init_early) from [] (setup_arch+0x8b4/0x998) [ 0.000000] [] (setup_arch) from [] (start_kernel+0x7c/0x3a0) [ 0.000000] [] (start_kernel) from [<80008074>] (0x80008074) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edf9e000 s14336 r8192 d14336 u36864 [ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1004592K/1047552K available (5651K kernel code, 680K rwdata, 2196K rodata, 406K init, 8209K bss, 42960K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07b1f4c (7848 kB) [ 0.000000] .init : 0xc07b2000 - 0xc0817800 ( 406 kB) [ 0.000000] .data : 0xc0818000 - 0xc08c22f0 ( 681 kB) [ 0.000000] .bss : 0xc08c22f0 - 0xc10c67e0 (8210 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000152] smp_twd: clock not found -2 [ 0.001647] Console: colour dummy device 80x30 [ 0.001708] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001708] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001739] ... MAX_LOCK_DEPTH: 48 [ 0.001739] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001770] ... CLASSHASH_SIZE: 4096 [ 0.001770] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001770] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001800] ... CHAINHASH_SIZE: 32768 [ 0.001800] memory used by lock dependency info: 5167 kB [ 0.001831] per task-struct memory footprint: 1152 bytes [ 0.001861] Calibrating local timer... 347.69MHz. [ 0.059020] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.148468] pid_max: default: 32768 minimum: 301 [ 0.148925] Security Framework initialized [ 0.149078] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.149078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.151397] CPU: Testing write buffer coherency: ok [ 0.152465] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152557] Setting up static identity map for 0x8055b180 - 0x8055b1f0 [ 0.158081] CPU1: Booted secondary processor [ 0.188171] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.188751] Brought up 2 CPUs [ 0.188781] SMP: Total of 2 processors activated. [ 0.188781] CPU: All CPU(s) started in SVC mode. [ 0.191436] devtmpfs: initialized [ 0.200653] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.204711] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.208465] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.367340] pinctrl core: initialized pinctrl subsystem [ 0.369873] regulator-dummy: no parameters [ 0.413085] NET: Registered protocol family 16 [ 0.419036] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.421112] cpuidle: using governor ladder [ 0.421142] cpuidle: using governor menu [ 0.434509] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.435333] OMAP GPIO hardware version 0.1 [ 0.436553] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.438262] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.439849] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.441467] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.443054] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.444366] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.462249] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.462738] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.464782] No ATAGs? [ 0.464874] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.464935] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.467315] OMAP DMA hardware revision 0.0 [ 0.511505] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.511566] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.545684] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.546508] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.547058] VDD_ETH: 3300 mV [ 0.551391] SCSI subsystem initialized [ 0.552154] usbcore: registered new interface driver usbfs [ 0.552307] usbcore: registered new interface driver hub [ 0.554290] usbcore: registered new device driver usb [ 0.562103] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.563171] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.564849] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.565765] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.570037] Switched to clocksource 32k_counter [ 0.700012] NET: Registered protocol family 2 [ 0.701873] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.702148] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.705078] TCP: Hash tables configured (established 8192 bind 8192) [ 0.705322] TCP: reno registered [ 0.705383] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.705780] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.707122] NET: Registered protocol family 1 [ 0.708465] RPC: Registered named UNIX socket transport module. [ 0.708496] RPC: Registered udp transport module. [ 0.708526] RPC: Registered tcp transport module. [ 0.708526] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.714752] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.718780] VFS: Disk quotas dquot_6.5.2 [ 0.718902] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.721160] NFS: Registering the id_resolver key type [ 0.721496] Key type id_resolver registered [ 0.721527] Key type id_legacy registered [ 0.721710] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.722259] msgmni has been set to 1468 [ 0.724914] bounce: pool size: 64 pages [ 0.725006] io scheduler noop registered [ 0.725036] io scheduler deadline registered [ 0.725128] io scheduler cfq registered (default) [ 0.727874] omap-usb2 4a0ad080.usb2phy: unable to get wkupclk, trying old name [ 0.727935] omap-usb2 4a0ad080.usb2phy: found usb_phy_cm_clk32k, please fix DTS [ 0.729858] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.730285] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.732666] pbias_mmc_omap4: 1800 <--> 3000 mV at 3000 mV [ 0.734069] abb_mpu: 1025 <--> 1389 mV [ 0.734985] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.740356] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.740417] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.740844] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.742492] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.742523] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 0.742736] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.743804] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.743835] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 0.744049] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.816040] console [ttyO2] enabled [ 1.820983] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.826843] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.836456] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.866760] brd: module loaded [ 1.882263] loop: module loaded [ 1.887359] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.897613] twl 0-0048: PIH (irq 39) nested IRQs [ 1.905426] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.912811] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.920288] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.927459] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.934112] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.940612] VUSIM: 1200 <--> 2900 mV [ 1.945922] VDAC: 1800 mV [ 1.949951] VANA: 2100 mV [ 1.954406] VCXIO: 1800 mV [ 1.958465] VUSB: 3300 mV [ 1.962982] V1V8: 1800 mV [ 1.967437] V2V1: 2100 mV [ 1.975494] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.989379] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/spi@48098000/eth@0[0]' [ 1.999114] spi1.0 supply vdd-io not found, using dummy regulator [ 2.006225] ks8851 spi1.0: message enable is 0 [ 2.016632] ks8851 spi1.0 eth0: revision 1, MAC 8a:35:0b:da:aa:69, IRQ 331, no EEPROM [ 2.027038] usbcore: registered new interface driver asix [ 2.033050] usbcore: registered new interface driver ax88179_178a [ 2.039550] usbcore: registered new interface driver cdc_ether [ 2.045898] usbcore: registered new interface driver smsc95xx [ 2.052093] usbcore: registered new interface driver net1080 [ 2.058135] usbcore: registered new interface driver cdc_subset [ 2.064483] usbcore: registered new interface driver zaurus [ 2.070556] usbcore: registered new interface driver cdc_ncm [ 2.077423] usbcore: registered new interface driver cdc_wdm [ 2.083587] usbcore: registered new interface driver usb-storage [ 2.090118] usbcore: registered new interface driver usbtest [ 2.098083] mousedev: PS/2 mouse device common for all mice [ 2.106933] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.114624] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.124786] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.134002] i2c /dev entries driver [ 2.140441] Driver for 1-wire Dallas network protocol. [ 2.149322] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.158050] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.167175] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.177398] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.220031] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.229400] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.239074] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.246124] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.253021] omap_hsmmc 480d5000.mmc: pins are not configured from the driver [ 2.260894] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.297851] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.300659] ledtrig-cpu: registered to indicate activity on CPUs [ 2.301116] usbcore: registered new interface driver usbhid [ 2.301116] usbhid: USB HID core driver [ 2.302581] oprofile: no performance counters [ 2.303436] oprofile: using timer interrupt. [ 2.304046] TCP: cubic registered [ 2.304077] Initializing XFRM netlink socket [ 2.304168] NET: Registered protocol family 17 [ 2.304229] NET: Registered protocol family 15 [ 2.304504] Key type dns_resolver registered [ 2.305267] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.305297] omap2_set_init_voltage: unable to set vdd_mpu [ 2.305297] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.305297] omap2_set_init_voltage: unable to set vdd_core [ 2.305328] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.305328] omap2_set_init_voltage: unable to set vdd_iva [ 2.307159] Power Management for TI OMAP4+ devices. [ 2.307220] Power Management for TI OMAP4. [ 2.307220] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.313812] ThumbEE CPU extension supported. [ 2.313812] Registering SWP/SWPB emulation handler [ 2.313812] SmartReflex Class3 initialized [ 2.335296] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.335296] sr_init: No PMIC hook to init smartreflex [ 2.335327] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.336181] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.336181] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 2.374389] VUSB: disabling [ 2.375091] VANA: disabling [ 2.375762] VDAC: disabling [ 2.378509] VAUX1_6030: disabling [ 2.476989] mmc0: new high speed SDHC card at address 0007 [ 2.476989] Waiting for root device /dev/mmcblk1p2... [ 2.490112] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.499694] mmcblk0: p1 p2 [ 2.511352] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.520233] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.526763] omap_hsmmc 480d5000.mmc: exceeding card's volts [ 2.920288] mmc1: host does not support reading read-only switch. assuming write-enable. [ 2.931152] mmc1: new high speed SDHC card at address b368 [ 2.937896] mmcblk1: mmc1:b368 USD 3.75 GiB [ 2.945617] mmcblk1: p1 p2 [ 3.022644] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 3.034423] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.049957] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.057739] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 4.453552] EXT4-fs (mmcblk1p2): recovery complete [ 4.930755] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.939361] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 4.949401] devtmpfs: mounted [ 4.952667] Freeing unused kernel memory: 404K (c07b2000 - c0817000) modprobe: FATAL: Could not load /lib/modules/3.16.0-rc2-78707-g0a26344/modules.dep: No such file or directory INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 6.087188] udevd[854]: starting version 172 . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...[ 7.160980] random: nonblocking pool is initialized done. Activating swap...done. [ 7.821777] EXT4-fs (mmcblk1p2): warning: mounting fs with errors, running e2fsck is recommended [ 8.187042] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux 2.19.1 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...done. Cleaning up temporary files.... Setting kernel variables ...done. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Debian GNU/Linux wheezy/sid armel ttyO2 armel login: Debian GNU/Linux wheezy/sid armel ttyO2 armel login: Debian GNU/Linux wheezy/sid armel ttyO2 armel login: root Last login: Sat Jan 1 00:00:13 UTC 2000 on ttyO2 Linux armel 3.16.0-rc2-78707-g0a26344 #1 SMP Fri Jul 25 06:16:54 MDT 2014 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. %% Start PM consolidated quick test (retention only) %% Preparation root@armel:~# root@armel:~# root@armel:~# root@armel:~# mount -t sysfs none /sys mount: none already mounted or /sys busy mount: according to mtab, sysfs is already mounted on /sys root@armel:~# root@armel:~# mount -t debugfs none /debug mount: none already mounted or /debug busy mount: according to mtab, /debug is already mounted on /debug root@armel:~# root@armel:~# root@armel:~# root@armel:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | pa ste -s -d' '`; do echo -1 > $u/power/autosuspend_delay_ms; done root@armel:~# root@armel:~# echo 0 > /debug/pm_debug/enable_off_mode root@armel:~# root@armel:~# %% Baseline pm_debug count dump cat /debug/pm_debug/count cefuse_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0 always_on_core_pwrdm (ON),OFF:231,RET:0,INA:0,ON:232,RET-LOGIC-OFF:0 l4per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 l3init_pwrdm (RET),OFF:0,RET:2,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 ivahd_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 mpu_pwrdm (ON),OFF:0,RET:150,INA:0,ON:151,RET-LOGIC-OFF:142,RET-MEMBANK1-OFF:150,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 cpu1_pwrdm (ON),OFF:230,RET:0,INA:0,ON:231,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cpu0_pwrdm (ON),OFF:150,RET:0,INA:0,ON:151,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 tesla_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 dss_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 abe_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 gfx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:0 l3_dma_clkdm->core_pwrdm (0) emu_sys_clkdm->emu_pwrdm (0) l4_wkup_clkdm->wkup_pwrdm (2) l3_dss_clkdm->dss_pwrdm (0) iss_clkdm->cam_pwrdm (0) l3_1_clkdm->core_pwrdm (0) l3_2_clkdm->core_pwrdm (1) mpuss_clkdm->mpu_pwrdm (1) ducati_clkdm->core_pwrdm (0) l4_ao_clkdm->always_on_core_pwrdm (0) l3_emif_clkdm->core_pwrdm (2) mpu1_clkdm->cpu1_pwrdm (0) mpu0_clkdm->cpu0_pwrdm (0) d2d_clkdm->core_pwrdm (0) l3_init_clkdm->l3init_pwrdm (0) l3_instr_clkdm->core_pwrdm (0) abe_clkdm->abe_pwrdm (0) l4_per_clkdm->l4per_pwrdm (5) l4_secure_clkdm->l4per_pwrdm (0) ivahd_clkdm->ivahd_pwrdm (0) l3_gfx_clkdm->gfx_pwrdm (0) tesla_clkdm->tesla_pwrdm (0) l4_cfg_clkdm->core_pwrdm (0) l4_cefuse_clkdm->cefuse_pwrdm (0) root@armel:~# root@armel:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do echo e nabled > $u/power/wakeup; done root@armel:~# %% Start retention double suspend/resume UART wakeup test root@armel:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do echo a uto > $u/power/control; done root@armel:~# root@armel:~# echo mem > /sys/power/state [ 20.880493] PM: Syncing filesystems ... done. [ 26.054107] PM: Preparing system for mem sleep [ 26.070312] Freezing user space processes ... (elapsed 0.007 seconds) done. [ 26.080230] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 26.090118] PM: Entering mem sleep [ 26.090118] Suspending console(s) (use no_console_suspend to debug) [ 26.117340] PM: suspend of devices complete after 16.448 msecs [ 26.121673] PM: late suspend of devices complete after 0.001 msecs [ 26.127593] PM: noirq suspend of devices complete after 5.798 msecs [ 26.127593] Disabling non-boot CPUs ... [ 26.135284] CPU1: shutdown [ 26.143676] Powerdomain (core_pwrdm) didn't enter target state 1 [ 26.143676] Powerdomain (abe_pwrdm) didn't enter target state 1 [ 26.143676] Powerdomain (mpu_pwrdm) didn't enter target state 1 [ 26.143676] Powerdomain (core_pwrdm) didn't enter target state 1 [ 26.143676] Powerdomain (abe_pwrdm) didn't enter target state 1 [ 26.143676] Powerdomain (mpu_pwrdm) didn't enter target state 1 [ 26.143676] Could not enter target state in pm_suspend [ 26.143676] A possible cause could be an old bootloader - try u-boot >= v2012.07 [ 26.143707] Enabling non-boot CPUs ... [ 26.143768] CPU1: Booted secondary processor [ 26.148010] CPU1 is up [ 26.150970] PM: noirq resume of devices complete after 2.960 msecs [ 26.154968] PM: early resume of devices complete after 2.868 msecs [ 26.240692] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 26.313812] PM: resume of devices complete after 158.843 msecs [ 26.431213] PM: Finishing wakeup. [ 26.431213] Restarting tasks ... done. root@armel:~# root@armel:~# a -bash: a: command not found root@armel:~# root@armel:~# root@armel:~# cat /debug/pm_debug/count cefuse_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0 always_on_core_pwrdm (ON),OFF:346,RET:0,INA:0,ON:347,RET-LOGIC-OFF:0 l4per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 l3init_pwrdm (RET),OFF:0,RET:4,INA:0,ON:4,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 ivahd_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 mpu_pwrdm (ON),OFF:0,RET:258,INA:0,ON:259,RET-LOGIC-OFF:246,RET-MEMBANK1-OFF:258,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 cpu1_pwrdm (ON),OFF:345,RET:0,INA:0,ON:346,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cpu0_pwrdm (ON),OFF:258,RET:0,INA:0,ON:259,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 tesla_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 dss_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 abe_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 gfx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:0 l3_dma_clkdm->core_pwrdm (0) emu_sys_clkdm->emu_pwrdm (0) l4_wkup_clkdm->wkup_pwrdm (2) l3_dss_clkdm->dss_pwrdm (0) iss_clkdm->cam_pwrdm (0) l3_1_clkdm->core_pwrdm (0) l3_2_clkdm->core_pwrdm (1) mpuss_clkdm->mpu_pwrdm (1) ducati_clkdm->core_pwrdm (0) l4_ao_clkdm->always_on_core_pwrdm (0) l3_emif_clkdm->core_pwrdm (2) mpu1_clkdm->cpu1_pwrdm (0) mpu0_clkdm->cpu0_pwrdm (0) d2d_clkdm->core_pwrdm (0) l3_init_clkdm->l3init_pwrdm (0) l3_instr_clkdm->core_pwrdm (0) abe_clkdm->abe_pwrdm (0) l4_per_clkdm->l4per_pwrdm (5) l4_secure_clkdm->l4per_pwrdm (0) ivahd_clkdm->ivahd_pwrdm (0) l3_gfx_clkdm->gfx_pwrdm (0) tesla_clkdm->tesla_pwrdm (0) l4_cfg_clkdm->core_pwrdm (0) l4_cefuse_clkdm->cefuse_pwrdm (0) root@armel:~# root@armel:~# root@armel:~# root@armel:~# echo mem > /sys/power/state [ 31.690155] PM: Syncing filesystems ... done. [ 31.761779] PM: Preparing system for mem sleep [ 31.766601] Freezing user space processes ... (elapsed 0.006 seconds) done. [ 31.773376] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 31.782897] PM: Entering mem sleep [ 31.782897] Suspending console(s) (use no_console_suspend to debug) [ 31.808990] PM: suspend of devices complete after 9.735 msecs [ 31.813446] PM: late suspend of devices complete after 0.640 msecs [ 31.818298] PM: noirq suspend of devices complete after 4.730 msecs [ 31.818298] Disabling non-boot CPUs ... [ 31.821624] CPU1: shutdown [ 31.821624] Powerdomain (abe_pwrdm) didn't enter target state 1 [ 31.821624] Powerdomain (abe_pwrdm) didn't enter target state 1 [ 31.821624] Could not enter target state in pm_suspend [ 31.821624] A possible cause could be an old bootloader - try u-boot >= v2012.07 [ 31.821655] Enabling non-boot CPUs ... [ 31.823608] CPU1: Booted secondary processor [ 31.824310] CPU1 is up [ 31.826995] PM: noirq resume of devices complete after 2.655 msecs [ 31.828491] PM: early resume of devices complete after 0.854 msecs [ 31.917724] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 31.981872] PM: resume of devices complete after 150.604 msecs [ 32.073486] PM: Finishing wakeup. [ 32.076965] Restarting tasks ... done. root@armel:~# root@armel:~# root@armel:~# root@armel:~# cat /debug/pm_debug/count cefuse_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0 always_on_core_pwrdm (ON),OFF:469,RET:0,INA:0,ON:470,RET-LOGIC-OFF:0 l4per_pwrdm (ON),OFF:0,RET:3,INA:0,ON:4,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 l3init_pwrdm (RET),OFF:0,RET:6,INA:0,ON:6,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 ivahd_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 mpu_pwrdm (ON),OFF:0,RET:373,INA:0,ON:374,RET-LOGIC-OFF:353,RET-MEMBANK1-OFF:373,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 cpu1_pwrdm (ON),OFF:468,RET:0,INA:0,ON:469,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cpu0_pwrdm (ON),OFF:373,RET:0,INA:0,ON:374,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 tesla_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 dss_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 abe_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 gfx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:1 l3_dma_clkdm->core_pwrdm (0) emu_sys_clkdm->emu_pwrdm (0) l4_wkup_clkdm->wkup_pwrdm (2) l3_dss_clkdm->dss_pwrdm (0) iss_clkdm->cam_pwrdm (0) l3_1_clkdm->core_pwrdm (0) l3_2_clkdm->core_pwrdm (1) mpuss_clkdm->mpu_pwrdm (1) ducati_clkdm->core_pwrdm (0) l4_ao_clkdm->always_on_core_pwrdm (0) l3_emif_clkdm->core_pwrdm (2) mpu1_clkdm->cpu1_pwrdm (0) mpu0_clkdm->cpu0_pwrdm (0) d2d_clkdm->core_pwrdm (0) l3_init_clkdm->l3init_pwrdm (0) l3_instr_clkdm->core_pwrdm (0) abe_clkdm->abe_pwrdm (0) l4_per_clkdm->l4per_pwrdm (10) l4_secure_clkdm->l4per_pwrdm (0) ivahd_clkdm->ivahd_pwrdm (0) l3_gfx_clkdm->gfx_pwrdm (0) tesla_clkdm->tesla_pwrdm (0) l4_cfg_clkdm->core_pwrdm (0) l4_cefuse_clkdm->cefuse_pwrdm (0) root@armel:~# root@armel:~# root@armel:~# root@armel:~# ./test_rootfs_access_nonexistent_file__ret_susp -bash: ./test_rootfs_access_nonexistent_file__ret_susp: No such file or directory root@armel:~# root@armel:~# %% End retention double suspend/resume UART wakeup test %% Start retention dynamic idle UART wakeup test for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | pa ste -s -d' '`; do echo 3000 > $u/power/autosuspend_delay_ms; done root@armel:~# root@armel:~# root@armel:~# root@armel:~# cat /debug/pm_debug/count cefuse_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0 always_on_core_pwrdm (ON),OFF:571,RET:0,INA:0,ON:572,RET-LOGIC-OFF:0 l4per_pwrdm (ON),OFF:0,RET:4,INA:0,ON:5,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 l3init_pwrdm (RET),OFF:0,RET:6,INA:0,ON:6,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 ivahd_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 mpu_pwrdm (ON),OFF:0,RET:469,INA:0,ON:470,RET-LOGIC-OFF:441,RET-MEMBANK1-OFF:469,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 cpu1_pwrdm (ON),OFF:570,RET:0,INA:0,ON:571,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cpu0_pwrdm (ON),OFF:469,RET:0,INA:0,ON:470,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 tesla_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 dss_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 abe_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 gfx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:1 l3_dma_clkdm->core_pwrdm (0) emu_sys_clkdm->emu_pwrdm (0) l4_wkup_clkdm->wkup_pwrdm (2) l3_dss_clkdm->dss_pwrdm (0) iss_clkdm->cam_pwrdm (0) l3_1_clkdm->core_pwrdm (0) l3_2_clkdm->core_pwrdm (1) mpuss_clkdm->mpu_pwrdm (1) ducati_clkdm->core_pwrdm (0) l4_ao_clkdm->always_on_core_pwrdm (0) l3_emif_clkdm->core_pwrdm (2) mpu1_clkdm->cpu1_pwrdm (0) mpu0_clkdm->cpu0_pwrdm (0) d2d_clkdm->core_pwrdm (0) l3_init_clkdm->l3init_pwrdm (0) l3_instr_clkdm->core_pwrdm (0) abe_clkdm->abe_pwrdm (0) l4_per_clkdm->l4per_pwrdm (2) l4_secure_clkdm->l4per_pwrdm (0) ivahd_clkdm->ivahd_pwrdm (0) l3_gfx_clkdm->gfx_pwrdm (0) tesla_clkdm->tesla_pwrdm (0) l4_cfg_clkdm->core_pwrdm (0) l4_cefuse_clkdm->cefuse_pwrdm (0) root@armel:~# root@armel:~# root@armel:~# root@armel:~# ./test_rootfs_access_nonexistent_file__ret_dyn -bash: ./test_rootfs_access_nonexistent_file__ret_dyn: No such file or directory root@armel:~# root@armel:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | pa ste -s -d' '`; do echo -1 > $u/power/autosuspend_delay_ms; done root@armel:~# root@armel:~# %% End retention dynamic idle UART wakeup test %% End PM consolidated quick test (retention only)