U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete m - CRC mode, 9(SOH)/4431(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00453f30 = 4538160 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4538096 Bytes = 4.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.12.0-rc1-22943-g4ff7e3b (paul@knihy) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Thu Oct 24 09:14:20 MDT 2013 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c08b93c0, node_mem_map c0e28000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1640000 s14016 r8192 d14656 u36864 [ 0.000000] pcpu-alloc: s14016 r8192 d14656 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1007484K/1047552K available (5783K kernel code, 657K rwdata, 2080K rodata, 393K init, 5523K bss, 40068K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07b6094 (7865 kB) [ 0.000000] .init : 0xc07b7000 - 0xc08196c0 ( 394 kB) [ 0.000000] .data : 0xc081a000 - 0xc08be4c8 ( 658 kB) [ 0.000000] .bss : 0xc08be4c8 - 0xc0e23260 (5524 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] smp_twd: clock not found -2 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] Calibrating local timer... 348.07MHz. [ 0.059844] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.149291] pid_max: default: 32768 minimum: 301 [ 0.149902] Security Framework initialized [ 0.150085] Mount-cache hash table entries: 512 [ 0.161682] CPU: Testing write buffer coherency: ok [ 0.163238] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.163299] Setting up static identity map for 0xc057f1f8 - 0xc057f268 [ 0.163391] L310 cache controller enabled [ 0.163421] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB [ 0.168121] CPU1: Booted secondary processor [ 0.248809] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.249359] Brought up 2 CPUs [ 0.249359] SMP: Total of 2 processors activated. [ 0.249389] CPU: All CPU(s) started in SVC mode. [ 0.251953] devtmpfs: initialized [ 0.261413] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.330566] pinctrl core: initialized pinctrl subsystem [ 0.333801] regulator-dummy: no parameters [ 0.338043] NET: Registered protocol family 16 [ 0.345062] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.423706] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.424835] OMAP GPIO hardware version 0.1 [ 0.426574] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.429107] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.431304] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.433441] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.435638] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.437408] omap-gpmc 50000000.gpmc: error: clk_get [ 0.437438] omap-gpmc: probe of 50000000.gpmc failed with error -2 [ 0.462524] No ATAGs? [ 0.462554] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.462585] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.466278] OMAP DMA hardware revision 0.0 [ 0.511199] bio: create slab at 0 [ 0.513977] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.514007] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.569396] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.570312] of_get_named_gpio_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.571044] VDD_ETH: 3300 mV [ 0.576446] SCSI subsystem initialized [ 0.578002] usbcore: registered new interface driver usbfs [ 0.578338] usbcore: registered new interface driver hub [ 0.578765] usbcore: registered new device driver usb [ 0.582641] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.583679] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.585296] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.586395] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.592468] Switched to clocksource 32k_counter [ 0.712097] NET: Registered protocol family 2 [ 0.713928] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.714233] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.716949] TCP: Hash tables configured (established 8192 bind 8192) [ 0.717193] TCP: reno registered [ 0.717224] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.717590] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.718963] NET: Registered protocol family 1 [ 0.720092] RPC: Registered named UNIX socket transport module. [ 0.720123] RPC: Registered udp transport module. [ 0.720123] RPC: Registered tcp transport module. [ 0.720153] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.721008] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.901519] bounce pool size: 64 pages [ 0.902130] VFS: Disk quotas dquot_6.5.2 [ 0.902435] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.904785] NFS: Registering the id_resolver key type [ 0.905151] Key type id_resolver registered [ 0.905151] Key type id_legacy registered [ 0.905273] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.905822] msgmni has been set to 1473 [ 0.908813] io scheduler noop registered [ 0.908813] io scheduler deadline registered [ 0.908905] io scheduler cfq registered (default) [ 0.910095] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.910614] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.913909] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.918853] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.919738] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.921386] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 0.921752] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.922790] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 0.923156] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.749053] console [ttyO2] enabled [ 1.753784] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.763549] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.796325] brd: module loaded [ 1.812927] loop: module loaded [ 1.818634] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.828918] twl 0-0048: PIH (irq 39) nested IRQs [ 1.836639] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.844238] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.851409] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.858642] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.865386] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.871887] VUSIM: 1200 <--> 2900 mV [ 1.877532] VDAC: 1800 mV [ 1.881652] VANA: 2100 mV [ 1.886260] VCXIO: 1800 mV [ 1.890502] VUSB: 3300 mV [ 1.895050] V1V8: 1800 mV [ 1.899627] V2V1: 2100 mV [ 1.909729] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.918823] ------------[ cut here ]------------ [ 1.923736] WARNING: CPU: 0 PID: 1 at drivers/gpio/gpio-omap.c:430 gpio_irq_type+0x114/0x12c() [ 1.932830] Modules linked in: [ 1.936065] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc1-22943-g4ff7e3b #1 [ 1.944061] [] (unwind_backtrace+0x0/0xf0) from [] (show_stack+0x10/0x14) [ 1.953094] [] (show_stack+0x10/0x14) from [] (dump_stack+0x70/0x8c) [ 1.961639] [] (dump_stack+0x70/0x8c) from [] (warn_slowpath_common+0x6c/0x8c) [ 1.971099] [] (warn_slowpath_common+0x6c/0x8c) from [] (warn_slowpath_null+0x1c/0x24) [ 1.981292] [] (warn_slowpath_null+0x1c/0x24) from [] (gpio_irq_type+0x114/0x12c) [ 1.991027] [] (gpio_irq_type+0x114/0x12c) from [] (__irq_set_trigger+0x5c/0xfc) [ 2.000671] [] (__irq_set_trigger+0x5c/0xfc) from [] (irq_set_irq_type+0x38/0x58) [ 2.010437] [] (irq_set_irq_type+0x38/0x58) from [] (irq_create_of_mapping+0xd8/0x104) [ 2.020629] [] (irq_create_of_mapping+0xd8/0x104) from [] (irq_of_parse_and_map+0x30/0x38) [ 2.031188] [] (irq_of_parse_and_map+0x30/0x38) from [] (spi_register_master+0x27c/0x7a4) [ 2.041656] [] (spi_register_master+0x27c/0x7a4) from [] (omap2_mcspi_probe+0x31c/0x3f8) [ 2.052032] [] (omap2_mcspi_probe+0x31c/0x3f8) from [] (platform_drv_probe+0x18/0x1c) [ 2.062164] [] (platform_drv_probe+0x18/0x1c) from [] (driver_probe_device+0x94/0x230) [ 2.072326] [] (driver_probe_device+0x94/0x230) from [] (__driver_attach+0x94/0x98) [ 2.082275] [] (__driver_attach+0x94/0x98) from [] (bus_for_each_dev+0x64/0x88) [ 2.091796] [] (bus_for_each_dev+0x64/0x88) from [] (bus_add_driver+0x234/0x2cc) [ 2.101440] [] (bus_add_driver+0x234/0x2cc) from [] (driver_register+0x78/0xf4) [ 2.110992] [] (driver_register+0x78/0xf4) from [] (do_one_initcall+0x30/0x154) [ 2.120574] [] (do_one_initcall+0x30/0x154) from [] (kernel_init_freeable+0xfc/0x1c4) [ 2.130676] [] (kernel_init_freeable+0xfc/0x1c4) from [] (kernel_init+0x8/0xe4) [ 2.140228] [] (kernel_init+0x8/0xe4) from [] (ret_from_fork+0x14/0x2c) [ 2.149139] ---[ end trace e958249d82e05017 ]--- [ 2.154022] genirq: Setting trigger mode 8 for irq 331 failed (gpio_irq_type+0x0/0x12c) [ 2.163391] omap-dma-engine 4a056000.dma-controller: allocating channel for 36 [ 2.171081] omap-dma-engine 4a056000.dma-controller: allocating channel for 35 [ 2.185089] ks8851 spi1.0: message enable is 0 [ 2.193572] ------------[ cut here ]------------ [ 2.198455] WARNING: CPU: 0 PID: 1 at drivers/gpio/gpio-omap.c:430 gpio_irq_type+0x114/0x12c() [ 2.207550] Modules linked in: [ 2.210784] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.12.0-rc1-22943-g4ff7e3b #1 [ 2.219787] [] (unwind_backtrace+0x0/0xf0) from [] (show_stack+0x10/0x14) [ 2.228820] [] (show_stack+0x10/0x14) from [] (dump_stack+0x70/0x8c) [ 2.237365] [] (dump_stack+0x70/0x8c) from [] (warn_slowpath_common+0x6c/0x8c) [ 2.246826] [] (warn_slowpath_common+0x6c/0x8c) from [] (warn_slowpath_null+0x1c/0x24) [ 2.257019] [] (warn_slowpath_null+0x1c/0x24) from [] (gpio_irq_type+0x114/0x12c) [ 2.266784] [] (gpio_irq_type+0x114/0x12c) from [] (__irq_set_trigger+0x5c/0xfc) [ 2.276428] [] (__irq_set_trigger+0x5c/0xfc) from [] (__setup_irq+0x430/0x480) [ 2.285888] [] (__setup_irq+0x430/0x480) from [] (request_threaded_irq+0xd8/0x150) [ 2.295715] [] (request_threaded_irq+0xd8/0x150) from [] (ks8851_probe+0x380/0x4e4) [ 2.305664] [] (ks8851_probe+0x380/0x4e4) from [] (spi_drv_probe+0x18/0x1c) [ 2.314849] [] (spi_drv_probe+0x18/0x1c) from [] (driver_probe_device+0x94/0x230) [ 2.324584] [] (driver_probe_device+0x94/0x230) from [] (__driver_attach+0x94/0x98) [ 2.334503] [] (__driver_attach+0x94/0x98) from [] (bus_for_each_dev+0x64/0x88) [ 2.344055] [] (bus_for_each_dev+0x64/0x88) from [] (bus_add_driver+0x234/0x2cc) [ 2.353729] [] (bus_add_driver+0x234/0x2cc) from [] (driver_register+0x78/0xf4) [ 2.363281] [] (driver_register+0x78/0xf4) from [] (do_one_initcall+0x30/0x154) [ 2.372833] [] (do_one_initcall+0x30/0x154) from [] (kernel_init_freeable+0xfc/0x1c4) [ 2.382934] [] (kernel_init_freeable+0xfc/0x1c4) from [] (kernel_init+0x8/0xe4) [ 2.392517] [] (kernel_init+0x8/0xe4) from [] (ret_from_fork+0x14/0x2c) [ 2.401336] ---[ end trace e958249d82e05018 ]--- [ 2.406219] genirq: Setting trigger mode 8 for irq 331 failed (gpio_irq_type+0x0/0x12c) [ 2.415069] ks8851 spi1.0: failed to get irq [ 2.419647] ks8851: probe of spi1.0 failed with error -22 [ 2.428131] usbcore: registered new interface driver asix [ 2.434204] usbcore: registered new interface driver ax88179_178a [ 2.440917] usbcore: registered new interface driver cdc_ether [ 2.447418] usbcore: registered new interface driver r815x [ 2.453582] usbcore: registered new interface driver smsc95xx [ 2.459930] usbcore: registered new interface driver net1080 [ 2.466247] usbcore: registered new interface driver cdc_subset [ 2.472839] usbcore: registered new interface driver zaurus [ 2.479064] usbcore: registered new interface driver cdc_ncm [ 2.486511] usbcore: registered new interface driver cdc_wdm [ 2.492858] usbcore: registered new interface driver usb-storage [ 2.499542] usbcore: registered new interface driver usbtest [ 2.506988] mousedev: PS/2 mouse device common for all mice [ 2.516998] twl_rtc rtc.5: Power up reset detected. [ 2.523315] twl_rtc rtc.5: Enabling TWL-RTC [ 2.532073] twl_rtc rtc.5: rtc core: registered rtc.5 as rtc0 [ 2.538665] i2c /dev entries driver [ 2.545654] Driver for 1-wire Dallas network protocol. [ 2.552459] ti-soc-thermal 4a002260.bandgap: failed to request fclock reference [ 2.560211] ti-soc-thermal: probe of 4a002260.bandgap failed with error -2 [ 2.570220] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.579742] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.588867] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.598327] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.606018] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.614227] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.662536] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.671630] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.680908] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 2.688598] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.696319] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 2.700469] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.702697] mmc0: new high speed SDHC card at address 0007 [ 2.716827] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 2.718231] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.728912] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 2.733032] mmcblk0: p1 p2 [ 2.740478] ledtrig-cpu: registered to indicate activity on CPUs [ 2.747863] usbcore: registered new interface driver usbhid [ 2.753814] usbhid: USB HID core driver [ 2.758789] oprofile: no performance counters [ 2.765106] oprofile: using timer interrupt. [ 2.770172] TCP: cubic registered [ 2.773712] Initializing XFRM netlink socket [ 2.778320] NET: Registered protocol family 17 [ 2.783111] NET: Registered protocol family 15 [ 2.788116] Key type dns_resolver registered [ 2.793823] Power Management for TI OMAP4+ devices. [ 2.799011] Power Management for TI OMAP4. [ 2.803375] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.810638] ThumbEE CPU extension supported. [ 2.818420] VUSB: disabling [ 2.822021] VANA: disabling [ 2.826019] VDAC: disabling [ 2.831542] VAUX1_6030: disabling [ 2.839508] twl_rtc rtc.5: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.854370] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.866882] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 2.914215] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.923156] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 7.404937] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [ 7.449218] EXT4-fs (mmcblk0p2): 2 orphan inodes deleted [ 7.454925] EXT4-fs (mmcblk0p2): recovery complete [ 8.429840] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 8.438476] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 8.450714] devtmpfs: mounted [ 8.454345] Freeing unused kernel memory: 392K (c07b7000 - c0819000) [ 9.032318] init: Failed to create pty - disabling logging for job [ 9.039764] init: Temporary process spawn error: No space left on device [ 9.109832] init: Failed to create pty - disabling logging for job [ 9.116882] init: Temporary process spawn error: No space left on device [ 9.145172] init: Failed to create pty - disabling logging for job [ 9.152130] init: Temporary process spawn error: No space left on device [ 9.163574] init: Failed to create pty - disabling logging for job [ 9.165740] init: Temporary process spawn error: No space left on device [ 9.407623] init: ureadahead main process (768) terminated with status 5 [ 9.773162] init: Failed to create pty - disabling logging for job [ 9.773712] init: Temporary process spawn error: No space left on device [ 9.821807] init: Failed to create pty - disabling logging for job [ 9.828857] init: Temporary process spawn error: No space left on device [ 9.951721] init: Failed to create pty - disabling logging for job [ 9.958587] init: Temporary process spawn error: No space left on device [ 10.905090] udevd[826]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk0p2: clean, 177161/963584 files, 2983612/7708672 blocks [ 13.707641] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 13.837188] init: udev-fallback-graphics main process (1501) terminated with status 1 [ 14.133636] init: plymouth main process (769) killed by SEGV signal [ 14.141235] init: plymouth-splash main process (1509) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 14.489440] init: plymouth-log main process (1563) terminated with status 1 [ 14.575408] init: failsafe main process (1565) killed by TERM signal [ 15.414978] init: plymouth-upstart-bridge main process (1600) terminated with status 1 [ 15.433990] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 15.970031] init: bluetooth main process (1625) terminated with status 1 [ 15.978302] init: bluetooth main process ended, respawning [ 16.213714] init: bluetooth main process (1663) terminated with status 1 [ 16.221343] init: bluetooth main process ended, respawning [ 16.407379] init: bluetooth main process (1686) terminated with status 1 [ 16.414611] init: bluetooth main process ended, respawning speech-dispatcher disabled; edit /etc/default/speech-dispatcher [ 17.681335] init: bluetooth main process (1712) terminated with status 1 [ 17.695953] init: bluetooth main process ended, respawning [ 17.703399] init: hybrid-gfx main process (1756) terminated with status 1 [ 17.712860] init: alsa-restore main process (1745) terminated with status 19 saned disabled; edit /etc/default/saned [ 18.041015] init: bluetooth main process (1797) terminated with status 1 [ 18.049377] init: bluetooth main process ended, respawning [ 18.260833] init: bluetooth main process (1825) terminated with status 1 [ 18.269500] init: bluetooth main process ended, respawning [ 18.510711] init: bluetooth main process (1863) terminated with status 1 [ 18.518829] init: bluetooth main process ended, respawning [ 18.718109] init: bluetooth main process (1889) terminated with status 1 [ 18.726135] init: bluetooth main process ended, respawning [ 18.872985] init: bluetooth main process (1917) terminated with status 1 [ 18.883453] init: bluetooth main process ended, respawning [ 19.361297] init: bluetooth main process (1940) terminated with status 1 [ 19.371887] init: bluetooth main process ended, respawning [ 19.526062] init: bluetooth main process (1969) terminated with status 1 [ 19.533172] init: bluetooth respawning too fast, stopped Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: