怘€æ€˜€`3f<€fÀæøÀ̆ž?`??f?æžf<øž`??ð3ž<3ž<`<f<?˜à?˜æ?˜à0˜˜fÃðÀ€˜0†xð˜à؞Øàó̘àó˜xÌ𘘘03`Ì3ž<~<àžf<ðffü3f<<`<†žøž~<æžþž`?˜øfÃæàóæž?怘€à˜þž<`<†žøž~<˜æfÏàæžþž`?ø†<†žøž†øæžæž˜žfÏæàfü

U-Boot 2011.06-00001-ge147603 (Sep 07 2012 - 22:19:41)

OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle xM Rev A
No EEPROM on expansion board
Die ID #2fa800001bf00000015739ea0702a01d
Hit any key to stop autoboot:  3  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # loady 0x81000000
## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
CSending: uImage-dtb.omap3-beagle-xm
Sending: 

Transfer complete
 - CRC mode, 8(SOH)/4678(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x00491ab2 = 4790962 Bytes
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,230400 vram=12M root=/dev/mmcblk0p2 rw mmcrootfstype=ext3 rootwait earlyprintk ignore_loglevel
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # bootm 0x81000000
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4790898 Bytes = 4.6 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.0-rc7-119419-gd5b9c9b (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Fri Feb 6 15:52:22 MST 2015
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard xM
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] cma: Reserved 16 MiB at 0x9e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c09718c0, node_mem_map dfa71000
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130816 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] PERCPU: Embedded 11 pages/cpu @df9f9000 s14016 r8192 d22848 u45056
[    0.000000] pcpu-alloc: s14016 r8192 d22848 u45056 alloc=11*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129664
[    0.000000] Kernel command line: console=ttyO2,230400 vram=12M root=/dev/mmcblk0p2 rw mmcrootfstype=ext3 rootwait earlyprintk ignore_loglevel
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 483384K/523264K available (6194K kernel code, 677K rwdata, 2360K rodata, 428K init, 8221K bss, 23496K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0862e30   (8556 kB)
[    0.000000]       .init : 0xc0863000 - 0xc08ce000   ( 428 kB)
[    0.000000]       .data : 0xc08ce000 - 0xc09776e8   ( 678 kB)
[    0.000000]        .bss : 0xc09776e8 - 0xc117ee50   (8222 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/331/600 MHz
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000061] OMAP clocksource: 32k_counter at 32768 Hz
[    0.001312] Console: colour dummy device 80x30
[    0.001373] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001403] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001403] ... MAX_LOCK_DEPTH:          48
[    0.001434] ... MAX_LOCKDEP_KEYS:        8191
[    0.001434] ... CLASSHASH_SIZE:          4096
[    0.001434] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001464] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001464] ... CHAINHASH_SIZE:          32768
[    0.001495]  memory used by lock dependency info: 5167 kB
[    0.001495]  per task-struct memory footprint: 1152 bytes
[    0.001525] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696)
[    0.097503] pid_max: default: 32768 minimum: 301
[    0.098052] Security Framework initialized
[    0.098297] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.098327] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102569] Initializing cgroup subsys memory
[    0.102661] Initializing cgroup subsys devices
[    0.102783] Initializing cgroup subsys freezer
[    0.102874] Initializing cgroup subsys blkio
[    0.102996] Initializing cgroup subsys perf_event
[    0.103118] CPU: Testing write buffer coherency: ok
[    0.104858] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.105010] Setting up static identity map for 0x805df050 - 0x805df0c0
[    0.109985] Brought up 1 CPUs
[    0.110015] SMP: Total of 1 processors activated (594.73 BogoMIPS).
[    0.110015] CPU: All CPU(s) started in SVC mode.
[    0.114135] devtmpfs: initialized
[    0.126129] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.207092] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.209503] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.318237] pinctrl core: initialized pinctrl subsystem
[    0.420898] NET: Registered protocol family 16
[    0.429840] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.432800] cpuidle: using governor ladder
[    0.432861] cpuidle: using governor menu
[    0.441192] Reprogramming SDRC clock to 331882352 Hz
[    0.453063] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
[    0.453124] platform 48310000.gpio: Driver omap_gpio requests probe deferral
[    0.455902] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.457427] OMAP GPIO hardware version 2.5
[    0.459320] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.462127] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.465026] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.467926] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[    0.470977] irq: no irq domain found for /ocp/pinmux@48002030 !
[    0.495788] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.498840] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
[    0.509307] No ATAGs?
[    0.509368] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.513092] OMAP DMA hardware revision 5.0
[    0.605804] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.607421] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb2_power_reg[0]' - status (-517)
[    0.607543] platform hsusb2_power_reg: Driver reg-fixed-voltage requests probe deferral
[    0.613220] SCSI subsystem initialized
[    0.614135] libata version 3.00 loaded.
[    0.615295] usbcore: registered new interface driver usbfs
[    0.615570] usbcore: registered new interface driver hub
[    0.615753] usbcore: registered new device driver usb
[    0.616607] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0)
[    0.616943] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral
[    0.623657] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
[    0.625244] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
[    0.626861] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
[    0.633331] Switched to clocksource 32k_counter
[    0.851470] NET: Registered protocol family 2
[    0.854187] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.854492] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[    0.856750] TCP: Hash tables configured (established 4096 bind 4096)
[    0.856994] TCP: reno registered
[    0.857055] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    0.857360] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    0.858978] NET: Registered protocol family 1
[    0.861083] RPC: Registered named UNIX socket transport module.
[    0.861114] RPC: Registered udp transport module.
[    0.861114] RPC: Registered tcp transport module.
[    0.861145] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.863098] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.871459] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.871826] audit: initializing netlink subsys (disabled)
[    0.872131] audit: type=2000 audit(0.850:1): initialized
[    0.878417] VFS: Disk quotas dquot_6.5.2
[    0.878631] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.881896] NFS: Registering the id_resolver key type
[    0.882385] Key type id_resolver registered
[    0.882415] Key type id_legacy registered
[    0.882659] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.888824] io scheduler noop registered
[    0.888885] io scheduler deadline registered
[    0.889007] io scheduler cfq registered (default)
[    0.893890] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    0.894714] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    0.896148] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
[    0.905883] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.914855] omap_uart 4806a000.serial: no wakeirq for uart0
[    0.914886] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]'
[    0.915649] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    0.918273] omap_uart 4806c000.serial: no wakeirq for uart0
[    0.918304] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]'
[    0.918701] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    0.920898] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]'
[    0.921295] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    1.394836] console [ttyO2] enabled
[    1.399353] omap_uart 49042000.serial: no wakeirq for uart0
[    1.402404] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49042000[0]'
[    1.407989] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
[    1.447357] brd: module loaded
[    1.468811] loop: module loaded
[    1.500274] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
[    1.503967] twl 0-0048: power (irq 312) chaining IRQs 315..322
[    1.566864] twl4030_gpio twl4030-gpio: gpio (irq 307) chaining IRQs 323..340
[    1.571197] gpiochip_find_base: found new base at 492
[    1.574798] gpiochip_add: registered GPIOs 492 to 511 on device: twl4030
[    1.644683] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.660064] usbcore: registered new interface driver asix
[    1.663360] usbcore: registered new interface driver ax88179_178a
[    1.666839] usbcore: registered new interface driver cdc_ether
[    1.670288] usbcore: registered new interface driver smsc95xx
[    1.673645] usbcore: registered new interface driver net1080
[    1.676879] usbcore: registered new interface driver cdc_subset
[    1.680297] usbcore: registered new interface driver zaurus
[    1.683685] usbcore: registered new interface driver cdc_ncm
[    1.688476] usbcore: registered new interface driver cdc_wdm
[    1.691833] usbcore: registered new interface driver usb-storage
[    1.695465] usbcore: registered new interface driver usbtest
[    1.702087] mousedev: PS/2 mouse device common for all mice
[    1.706848] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
[    1.713073] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[    1.717102] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
[    1.726074] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input1
[    1.737365] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[    1.741119] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[    1.749359] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[    1.755310] i2c /dev entries driver
[    1.760589] Driver for 1-wire Dallas network protocol.
[    1.768035] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.775177] Driver 'mmcblk' needs updating - please use bus_type methods
[    1.780364] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]'
[    1.785430] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]'
[    1.834899] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/heartbeat[0]' - status (0)
[    1.841156] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/mmc[0]' - status (0)
[    1.847564] ledtrig-cpu: registered to indicate activity on CPUs
[    1.851593] usbcore: registered new interface driver usbhid
[    1.854705] usbhid: USB HID core driver
[    1.859558] oprofile: using arm/armv7
[    1.862518] TCP: cubic registered
[    1.864471] Initializing XFRM netlink socket
[    1.867004] NET: Registered protocol family 17
[    1.869506] NET: Registered protocol family 15
[    1.872375] Key type dns_resolver registered
[    1.875244] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    1.879150] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    1.882293] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    1.886108] omap2_set_init_voltage: unable to set vdd_core
[    1.907409] ThumbEE CPU extension supported.
[    1.909759] Registering SWP/SWPB emulation handler
[    1.912384] SmartReflex Class3 initialized
[    1.925659] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[    1.930938] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb2_power_reg[0]' - status (0)
[    1.939758] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0)
[    1.948303] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/user[0]' - status (0)
[    1.954711] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[    1.961334] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    1.966552] sr_init: No PMIC hook to init smartreflex
[    1.969818] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    1.974395] smartreflex smartreflex.0: omap_sr_probe: smartreflex_mpu_iva: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    1.982513] smartreflex: probe of smartreflex.0 failed with error -61
[    1.986297] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    1.990692] smartreflex smartreflex.1: omap_sr_probe: smartreflex_core: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    1.998596] smartreflex: probe of smartreflex.1 failed with error -61
[    2.002227] sr_init: platform driver register failed for SR
[    2.071197] hsusb2_vbus: disabling
[    2.075134] VPLL2: disabling
[    2.077270] VUSB3V1: disabling
[    2.079437] VUSB1V8: disabling
[    2.081604] VUSB1V5: disabling
[    2.084136] VDAC: disabling
[    2.086364] VAUX3: disabling
[    2.092254] Waiting for root device /dev/mmcblk0p2...
[    2.267181] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.274902] mmc0: new high speed SDHC card at address 1234
[    2.281005] mmcblk0: mmc0:1234 SA04G 3.68 GiB 
[    2.291870]  mmcblk0: p1 p2
[    4.353057] kjournald starting.  Commit interval 5 seconds
[    4.357086] EXT3-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[    4.755920] EXT3-fs (mmcblk0p2): using internal journal
[    4.768768] EXT3-fs (mmcblk0p2): recovery complete
[    4.771423] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    4.775543] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    4.788421] devtmpfs: mounted
[    4.792053] Freeing unused kernel memory: 428K (c0863000 - c08ce000)
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
[    5.924346] udevd (91): /proc/91/oom_adj is deprecated, please use /proc/91/oom_score_adj instead.
Synthesizing the initial hotplug events
[   13.736511] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Remounting root file system...
mount: according to mtab, /proc is already mounted on /proc

WARNING: Couldn't open directory /lib/modules/3.19.0-rc7-119419-gd5b9c9b: No such file or directory
FATAL: Could not open /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep.temp for writing: No such file or directory
root: mount: mount point /proc/bus/usb does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

ifconfig: SIOCGIFFLAGS: No such device
modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

eth0      No such device

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

udhcpc: SIOCGIFINDEX: No such device
done.
Starting portmap daemon: portmap.
Tue Jul 22 00:18:00 UTC 2008
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1327: No soundcards found...
Starting Dropbear SSH server: [   21.271911] random: dropbear urandom read with 91 bits of entropy available
modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting system message bus: dbus.
Starting syslogd/klogd: start-stop-daemon: lseek: Invalid argument
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem: hcidmodprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119419-gd5b9c9b/modules.dep: No such file or directory

 hid2hci.

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: root
login[1423]: root login  on `ttyO2'

root@beagleboard:~# 
root@beagleboard:~# %% Start PM consolidated quick test


%% Preparation


root@beagleboard:~# 
root@beagleboard:~# mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@beagleboard:~# 
root@beagleboard:~# mount -t debugfs none /debug
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# echo 0 > /deb[   28.473144] random: nonblocking pool is initialized
ug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# 
%% Baseline pm_debug count dump

cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1042,INA:0,ON:1043,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1042,INA:0,ON:1043,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:532,INA:510,ON:1043,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:532,INA:510,ON:1043,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (23)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo enabled >  $u/power/wakeup; done
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do echo auto >  $u/power/control; done

root@beagleboard:~#
%% Start retention double suspend/resume UART wakeup test

 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo auto >  $u/power/control; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/wakeup; cat $u/power/wakeup; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO3/power/wakeup
enabled
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/control; cat $u/power/control; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO3/power/control
auto
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   32.284088] PM: Syncing filesystems ... done.
[   33.511779] PM: Preparing system for mem sleep
[   33.556304] Freezing user space processes ... (elapsed 0.008 seconds) done.
[   33.569091] Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done.
[   33.578002] PM: Entering mem sleep
[   33.579864] Suspending console(s) (use no_console_suspend to debug)
[   33.636657] PM: suspend of devices complete after 40.161 msecs
[   33.653594] PM: late suspend of devices complete after 16.906 msecs
[   33.671905] PM: noirq suspend of devices complete after 18.249 msecs
[   33.672119] Disabling non-boot CPUs ...
[   33.672180] Successfully put all powerdomains to target state
[   33.682312] PM: noirq resume of devices complete after 10.009 msecs
[   33.696258] PM: early resume of devices complete after 11.291 msecs
[   34.101654] PM: resume of devices complete after 405.212 msecs
[   34.136657] PM: Finishing wakeup.
[   34.138458] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1163,INA:0,ON:1164,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1163,INA:0,ON:1164,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:650,INA:513,ON:1164,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:650,INA:513,ON:1164,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   36.902069] PM: Syncing filesystems ... done.
[   38.161773] PM: Preparing system for mem sleep
[   38.168426] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   38.174621] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   38.181579] PM: Entering mem sleep
[   38.183563] Suspending console(s) (use no_console_suspend to debug)
[   38.228515] PM: suspend of devices complete after 28.869 msecs
[   38.245300] PM: late suspend of devices complete after 16.723 msecs
[   38.262756] PM: noirq suspend of devices complete after 17.364 msecs
[   38.262786] Disabling non-boot CPUs ...
[   38.262817] Successfully put all powerdomains to target state
[   38.272583] PM: noirq resume of devices complete after 9.674 msecs
[   38.286254] PM: early resume of devices complete after 11.291 msecs
[   38.668853] PM: resume of devices complete after 382.415 msecs
[   38.701660] PM: Finishing wakeup.
[   38.703460] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1271,INA:0,ON:1272,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1271,INA:0,ON:1272,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:753,INA:518,ON:1272,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:753,INA:518,ON:1272,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_susp
-sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1454,INA:0,ON:1455,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:26,INA:4,ON:31,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:30,INA:0,ON:31,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1454,INA:0,ON:1455,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:935,INA:519,ON:1455,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:935,INA:519,ON:1455,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
[   59.289215] omap3_pm_off_mode_enable: Core OFF disabled due to errata i583
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   60.300903] PM: Syncing filesystems ... done.
[   61.132354] PM: Preparing system for mem sleep
[   61.139068] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   61.145324] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   61.152435] PM: Entering mem sleep
[   61.154327] Suspending console(s) (use no_console_suspend to debug)
[   61.198944] PM: suspend of devices complete after 28.503 msecs
[   61.215606] PM: late suspend of devices complete after 16.601 msecs
[   61.233032] PM: noirq suspend of devices complete after 17.364 msecs
[   61.233062] Disabling non-boot CPUs ...
[   61.233093] Successfully put all powerdomains to target state
[   61.243591] PM: noirq resume of devices complete after 10.345 msecs
[   61.257751] PM: early resume of devices complete after 11.291 msecs
[   61.639099] PM: resume of devices complete after 381.134 msecs
[   61.671905] PM: Finishing wakeup.
[   61.673736] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:48,RET:1541,INA:0,ON:1590,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:27,INA:4,ON:32,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1,RET:30,INA:0,ON:32,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:48,RET:1541,INA:0,ON:1590,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:1,RET:1062,INA:526,ON:1590,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:1,RET:1062,INA:526,ON:1590,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   64.462829] PM: Syncing filesystems ... done.
[   65.724548] PM: Preparing system for mem sleep
[   65.731109] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   65.737457] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   65.744445] PM: Entering mem sleep
[   65.746307] Suspending console(s) (use no_console_suspend to debug)
[   65.790924] PM: suspend of devices complete after 28.381 msecs
[   65.807708] PM: late suspend of devices complete after 16.723 msecs
[   65.825134] PM: noirq suspend of devices complete after 17.364 msecs
[   65.825164] Disabling non-boot CPUs ...
[   65.825195] Successfully put all powerdomains to target state
[   65.835357] PM: noirq resume of devices complete after 10.040 msecs
[   65.849151] PM: early resume of devices complete after 11.260 msecs
[   66.228881] PM: resume of devices complete after 379.547 msecs
[   66.261749] PM: Finishing wakeup.
[   66.263580] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:153,RET:1541,INA:0,ON:1695,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:28,INA:4,ON:33,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:2,RET:30,INA:0,ON:33,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:153,RET:1541,INA:0,ON:1695,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2,RET:1163,INA:529,ON:1695,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2,RET:1163,INA:529,ON:1695,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_susp
-sh: ./test_rootfs_access_nonexistent_file__off_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:328,RET:1541,INA:0,ON:1870,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:55,INA:4,ON:60,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:29,RET:30,INA:0,ON:60,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:328,RET:1541,INA:0,ON:1870,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:29,RET:1308,INA:532,ON:1870,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:29,RET:1308,INA:532,ON:1870,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_dyn
-sh: ./test_rootfs_access_nonexistent_file__off_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test