U-Boot SPL 2013.01-rc1-00207-gfbeb8fc-dirty (Nov 29 2012 - 03:05:13) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2013.01-rc1-00207-gfbeb8fc-dirty (Nov 29 2012 - 03:05:13) CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 3  0 Panda # Panda # setenv bootargs 'console=ttyO2,230400n8 root=/dev/mmcblk0p2 rootwait vram=32M debug earlyprintk ignore_loglevel init=/bin/sh' Panda # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 230400 bps... CSending: uImage-dtb.omap4-panda-es Sending: Transfer complete xyzModem - CRC mode, 5(SOH)/4283(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0042ed43 = 4386115 Bytes Panda # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4386051 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.15.0-78284-gbf32c4a (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Jun 15 20:18:50 MDT 2014 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI OMAP4 PandaBoard [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c08abf80, node_mem_map edff1000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 526 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/mach-omap2/omap4-common.c:192 omap4_l2c310_write_sec+0x5c/0x98() [ 0.000000] OMAP L2C310: ignoring write to reg 0xf80 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.15.0-78284-gbf32c4a #1 [ 0.000000] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.000000] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.000000] [] (dump_stack) from [] (warn_slowpath_common+0x68/0x8c) [ 0.000000] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.000000] [] (warn_slowpath_fmt) from [] (omap4_l2c310_write_sec+0x5c/0x98) [ 0.000000] [] (omap4_l2c310_write_sec) from [] (l2c310_enable+0x13c/0x200) [ 0.000000] [] (l2c310_enable) from [] (__l2c_init+0x168/0x1f0) [ 0.000000] [] (__l2c_init) from [] (l2x0_of_init+0x140/0x168) [ 0.000000] [] (l2x0_of_init) from [] (omap_l2_cache_init+0x44/0x9c) [ 0.000000] [] (omap_l2_cache_init) from [] (omap4430_init_early+0x6c/0xa0) [ 0.000000] [] (omap4430_init_early) from [] (setup_arch+0x8b4/0x998) [ 0.000000] [] (setup_arch) from [] (start_kernel+0x7c/0x3a0) [ 0.000000] [] (start_kernel) from [<80008074>] (0x80008074) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edf98000 s13632 r8192 d15040 u36864 [ 0.000000] pcpu-alloc: s13632 r8192 d15040 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,230400n8 root=/dev/mmcblk0p2 rootwait vram=32M debug earlyprintk ignore_loglevel init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1004620K/1047552K available (5617K kernel code, 670K rwdata, 2180K rodata, 397K init, 8209K bss, 42932K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07a57f4 (7798 kB) [ 0.000000] .init : 0xc07a6000 - 0xc0809540 ( 398 kB) [ 0.000000] .data : 0xc080a000 - 0xc08b18f0 ( 671 kB) [ 0.000000] .bss : 0xc08b18f0 - 0xc10b5d20 (8210 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001800] Console: colour dummy device 80x30 [ 0.001831] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001861] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001861] ... MAX_LOCK_DEPTH: 48 [ 0.001892] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001892] ... CLASSHASH_SIZE: 4096 [ 0.001922] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001922] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001922] ... CHAINHASH_SIZE: 32768 [ 0.001953] memory used by lock dependency info: 5167 kB [ 0.001953] per task-struct memory footprint: 1152 bytes [ 0.002014] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080261] pid_max: default: 32768 minimum: 301 [ 0.080688] Security Framework initialized [ 0.080841] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080841] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083160] CPU: Testing write buffer coherency: ok [ 0.084228] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.084320] Setting up static identity map for 0x80553200 - 0x80553270 [ 0.089874] CPU1: Booted secondary processor [ 0.170257] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.170837] Brought up 2 CPUs [ 0.170867] SMP: Total of 2 processors activated. [ 0.170867] CPU: All CPU(s) started in SVC mode. [ 0.173492] devtmpfs: initialized [ 0.182556] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.186920] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.190979] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.358581] pinctrl core: initialized pinctrl subsystem [ 0.361297] regulator-dummy: no parameters [ 0.409698] NET: Registered protocol family 16 [ 0.415649] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.431396] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.432250] OMAP GPIO hardware version 0.1 [ 0.433319] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.434967] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.436584] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.438201] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.439849] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.441192] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.442016] irq: no irq domain found for /ocp/pinmux@4a100040 ! [ 0.442535] irq: no irq domain found for /ocp/pinmux@4a100040 ! [ 0.443023] irq: no irq domain found for /ocp/pinmux@4a100040 ! [ 0.460327] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.460845] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.469085] No ATAGs? [ 0.469177] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.469207] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.471710] OMAP DMA hardware revision 0.0 [ 0.516174] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.516235] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.549621] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.550659] of_get_named_gpiod_flags exited with status 0 [ 0.640045] hsusb1_vbus: 3300 mV [ 0.640563] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 0.640624] platform wl12xx_vmmc: Driver reg-fixed-voltage requests probe deferral [ 0.645324] SCSI subsystem initialized [ 0.646057] usbcore: registered new interface driver usbfs [ 0.646240] usbcore: registered new interface driver hub [ 0.646484] usbcore: registered new device driver usb [ 0.646911] of_get_named_gpiod_flags exited with status 0 [ 0.648223] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 0.648254] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.648345] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 0.648376] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 0.648437] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 0.648468] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.648559] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 0.648590] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 0.652832] Switched to clocksource 32k_counter [ 0.792358] NET: Registered protocol family 2 [ 0.794281] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.794525] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.797149] TCP: Hash tables configured (established 8192 bind 8192) [ 0.797393] TCP: reno registered [ 0.797454] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.797821] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.799041] NET: Registered protocol family 1 [ 0.800140] RPC: Registered named UNIX socket transport module. [ 0.800201] RPC: Registered udp transport module. [ 0.800201] RPC: Registered tcp transport module. [ 0.800231] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.802398] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.807495] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.811523] VFS: Disk quotas dquot_6.5.2 [ 0.811676] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.813781] NFS: Registering the id_resolver key type [ 0.814117] Key type id_resolver registered [ 0.814178] Key type id_legacy registered [ 0.814331] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.814880] msgmni has been set to 1468 [ 0.817443] bounce: pool size: 64 pages [ 0.817535] io scheduler noop registered [ 0.817565] io scheduler deadline registered [ 0.817687] io scheduler cfq registered (default) [ 0.822448] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.822967] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.825622] pbias_mmc_omap4: 1800 <--> 3000 mV at 3000 mV [ 0.826660] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.832061] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.832092] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.832550] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.834381] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 0.834594] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.835662] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 0.835876] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.413269] console [ttyO2] enabled [ 1.416381] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.421478] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.447082] brd: module loaded [ 1.460815] loop: module loaded [ 1.465423] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.476074] usbcore: registered new interface driver asix [ 1.479156] usbcore: registered new interface driver ax88179_178a [ 1.482604] usbcore: registered new interface driver cdc_ether [ 1.485992] usbcore: registered new interface driver smsc95xx [ 1.489227] usbcore: registered new interface driver net1080 [ 1.492431] usbcore: registered new interface driver cdc_subset [ 1.495819] usbcore: registered new interface driver zaurus [ 1.499053] usbcore: registered new interface driver cdc_ncm [ 1.503082] usbcore: registered new interface driver cdc_wdm [ 1.506347] usbcore: registered new interface driver usb-storage [ 1.509765] usbcore: registered new interface driver usbtest [ 1.514801] mousedev: PS/2 mouse device common for all mice [ 1.520202] i2c /dev entries driver [ 1.522186] Driver for 1-wire Dallas network protocol. [ 1.525909] of_get_named_gpiod_flags exited with status 0 [ 1.532104] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.537384] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 1.542114] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 1.547576] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.551452] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.555480] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 1.560211] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 1.565338] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.569061] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.573699] usbcore: registered new interface driver usbhid [ 1.576721] usbhid: USB HID core driver [ 1.579925] oprofile: using arm/armv7-ca9 [ 1.582794] TCP: cubic registered [ 1.584625] Initializing XFRM netlink socket [ 1.587066] NET: Registered protocol family 17 [ 1.589538] NET: Registered protocol family 15 [ 1.592254] Key type dns_resolver registered [ 1.594879] twl: not initialized [ 1.596649] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.600982] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.605377] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.609710] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.614105] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.618438] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.622833] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 1.627166] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 1.630920] omap2_set_init_voltage: unable to set vdd_mpu [ 1.633880] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 1.637664] omap2_set_init_voltage: unable to set vdd_core [ 1.640655] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 1.644409] omap2_set_init_voltage: unable to set vdd_iva [ 1.648162] Power Management for TI OMAP4+ devices. [ 1.650878] Power Management for TI OMAP4. [ 1.653137] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.656921] ThumbEE CPU extension supported. [ 1.659362] Registering SWP/SWPB emulation handler [ 1.665069] of_get_named_gpiod_flags exited with status 0 [ 1.669219] vwl1271: 1800 mV [ 1.677917] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.683898] twl 0-0048: PIH (irq 39) nested IRQs [ 1.688385] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 1.693359] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 1.700683] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 1.708282] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.713348] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.718139] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.723083] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.727416] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.731781] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.735931] VDAC: 1800 mV [ 1.738677] VANA: 2100 mV [ 1.741882] VCXIO: 1800 mV [ 1.744812] VUSB: 3300 mV [ 1.748046] V1V8: 1800 mV [ 1.751312] V2V1: 2100 mV [ 1.756896] twl6040 0-004b: clk32k is not handled [ 1.762115] of_get_named_gpiod_flags exited with status 0 [ 1.767944] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.772949] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 1.778564] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 1.783233] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 1.786987] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 1.786987] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 1.800476] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 1.843200] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 1.848144] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 1.976135] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.018920] VUSB: disabling [ 2.021148] VANA: disabling [ 2.023376] VDAC: disabling [ 2.029235] Waiting for root device /dev/mmcblk0p2... [ 2.210906] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.218078] mmc0: new high speed SD card at address 1234 [ 2.222900] mmcblk0: mmc0:1234 SA02G 1.83 GiB [ 2.230743] mmcblk0: p1 p2 [ 2.240447] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.257629] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.263732] mmc1: new SDIO card at address 0001 [ 2.268035] kjournald starting. Commit interval 5 seconds [ 2.268432] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode [ 2.268524] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 2.282043] devtmpfs: mounted [ 2.284515] Freeing unused kernel memory: 396K (c07a6000 - c0809000) /bin/sh: can't access tty; job control turned off / # / # / #