U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 6(SOH)/3556(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00379189 = 3641737 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3641673 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-rc4-170972-g09ab7c8 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Fri Oct 23 11:07:31 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c09c4240, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67072 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @eee94000 s25088 r8192 d24064 u57344 [ 0.000000] pcpu-alloc: s25088 r8192 d24064 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259922 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001372K/1046528K available (6566K kernel code, 744K rwdata, 2228K rodata, 452K init, 8263K bss, 28772K reserved, 16384K cma-reserved, 251904K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc089ec78 (8796 kB) [ 0.000000] .init : 0xc089f000 - 0xc0910000 ( 452 kB) [ 0.000000] .data : 0xc0910000 - 0xc09ca1d8 ( 745 kB) [ 0.000000] .bss : 0xc09cd000 - 0xc11dee78 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002105] Console: colour dummy device 80x30 [ 0.002166] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002166] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002166] ... MAX_LOCK_DEPTH: 48 [ 0.002197] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002197] ... CLASSHASH_SIZE: 4096 [ 0.002197] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002197] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002227] ... CHAINHASH_SIZE: 32768 [ 0.002227] memory used by lock dependency info: 5167 kB [ 0.002227] per task-struct memory footprint: 1536 bytes [ 0.002258] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080291] pid_max: default: 32768 minimum: 301 [ 0.080688] Security Framework initialized [ 0.080841] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080841] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084136] Initializing cgroup subsys io [ 0.084259] Initializing cgroup subsys memory [ 0.084350] Initializing cgroup subsys devices [ 0.084442] Initializing cgroup subsys freezer [ 0.084594] Initializing cgroup subsys perf_event [ 0.084655] CPU: Testing write buffer coherency: ok [ 0.086090] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086181] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180297] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181060] Brought up 2 CPUs [ 0.181060] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181091] CPU: All CPU(s) started in SVC mode. [ 0.184509] devtmpfs: initialized [ 0.240325] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.245330] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.249908] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.294677] omap_hwmod: elm: no dt node [ 0.294677] ------------[ cut here ]------------ [ 0.294708] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2486 _init+0x3b8/0x40c() [ 0.294708] omap_hwmod: elm: doesn't have mpu register target base [ 0.294708] Modules linked in: [ 0.294738] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc4-170972-g09ab7c8 #1 [ 0.294738] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 0.294799] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.294830] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.294860] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.294891] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.294891] [] (warn_slowpath_fmt) from [] (_init+0x3b8/0x40c) [ 0.294921] [] (_init) from [] (omap_hwmod_for_each+0x30/0x5c) [ 0.294952] [] (omap_hwmod_for_each) from [] (__omap_hwmod_setup_all+0x24/0x40) [ 0.294952] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x80/0x1d8) [ 0.294982] [] (do_one_initcall) from [] (kernel_init_freeable+0x208/0x2e4) [ 0.295013] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.295043] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.295135] ---[ end trace c1a4a116d5446fec ]--- [ 0.433135] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.435699] pinctrl core: initialized pinctrl subsystem [ 0.441070] NET: Registered protocol family 16 [ 0.446502] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.470489] cpuidle: using governor ladder [ 0.500366] cpuidle: using governor menu [ 0.514190] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.515045] OMAP GPIO hardware version 0.1 [ 0.516296] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.518249] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.520172] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.522094] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.524017] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.545349] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.545867] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.554016] No ATAGs? [ 0.554107] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.554107] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.557312] OMAP DMA hardware revision 0.0 [ 0.615631] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.616699] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.617614] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.621887] SCSI subsystem initialized [ 0.622406] libata version 3.00 loaded. [ 0.623138] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.623687] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.623779] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.623870] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.624237] pps_core: LinuxPPS API ver. 1 registered [ 0.624267] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.624328] PTP clock support registered [ 0.628631] clocksource: Switched to clocksource 32k_counter [ 0.770172] NET: Registered protocol family 2 [ 0.772308] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.772491] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.775024] TCP: Hash tables configured (established 8192 bind 8192) [ 0.775360] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.775726] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.776824] NET: Registered protocol family 1 [ 0.778472] RPC: Registered named UNIX socket transport module. [ 0.778503] RPC: Registered udp transport module. [ 0.778533] RPC: Registered tcp transport module. [ 0.778594] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.783905] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.789489] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.789794] audit: initializing netlink subsys (disabled) [ 0.790069] audit: type=2000 audit(0.770:1): initialized [ 0.793823] VFS: Disk quotas dquot_6.6.0 [ 0.794158] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.796844] NFS: Registering the id_resolver key type [ 0.797302] Key type id_resolver registered [ 0.797332] Key type id_legacy registered [ 0.797546] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.803344] bounce: pool size: 64 pages [ 0.803497] io scheduler noop registered [ 0.803497] io scheduler deadline registered [ 0.803558] io scheduler cfq registered (default) [ 0.807159] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.807922] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.814392] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.820495] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.820495] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.821014] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.822875] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.822875] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.823150] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.824279] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.824310] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.824584] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.980712] console [ttyO2] enabled [ 2.017639] brd: module loaded [ 2.043273] loop: module loaded [ 2.049652] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.063415] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 2.073852] spi1.0 supply vdd-io not found, using dummy regulator [ 2.080749] spi1.0 supply vdd not found, using dummy regulator [ 2.087005] ks8851 spi1.0: message enable is 0 [ 2.098114] ks8851 spi1.0 eth0: revision 1, MAC fa:21:4c:6e:73:43, IRQ 202, no EEPROM [ 2.110717] mousedev: PS/2 mouse device common for all mice [ 2.116546] i2c /dev entries driver [ 2.121795] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.128112] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.134979] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.144561] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.154052] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.161224] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.167358] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.173675] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180541] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.190124] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.199615] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.206634] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.240783] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.247070] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.253936] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.263549] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.273040] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.280090] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.309112] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.315399] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.322326] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.332702] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.337524] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.343841] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.350708] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.360290] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.369781] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.376800] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.419525] ledtrig-cpu: registered to indicate activity on CPUs [ 2.427093] oprofile: using arm/armv7-ca9 [ 2.432189] Initializing XFRM netlink socket [ 2.437133] NET: Registered protocol family 10 [ 2.444976] sit: IPv6 over IPv4 tunneling driver [ 2.452148] NET: Registered protocol family 17 [ 2.456878] NET: Registered protocol family 15 [ 2.461975] Key type dns_resolver registered [ 2.466766] twl: not initialized [ 2.470153] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.478576] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.486968] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.495391] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.503814] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.512237] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.520629] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.529052] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.536254] omap2_set_init_voltage: unable to set vdd_mpu [ 2.541961] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.549285] omap2_set_init_voltage: unable to set vdd_core [ 2.555053] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.562255] omap2_set_init_voltage: unable to set vdd_iva [ 2.570220] Power Management for TI OMAP4+ devices. [ 2.575317] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.582580] ThumbEE CPU extension supported. [ 2.588348] Registering SWP/SWPB emulation handler [ 2.593383] SmartReflex Class3 initialized [ 2.602691] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.614746] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.621643] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.628814] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.638885] no flags found for reset [ 2.642669] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.650085] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.650085] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.667053] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.676818] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.684173] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.698913] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.698913] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.718017] mmc0: new high speed SDHC card at address b368 [ 2.720062] twl 0-0048: PIH (irq 327) nested IRQs [ 2.731750] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.742126] mmcblk0: p1 p2 [ 2.753417] VUSIM: failed to get the current voltage(-22) [ 2.763122] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.771057] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.789611] twl6040 0-004b: clk32k is not handled [ 2.801330] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.816223] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.825683] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.833282] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.833282] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.846343] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.853240] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.862854] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.872344] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.879364] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.879364] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.891784] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.898651] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.898681] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.917694] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.917694] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.931121] ------------[ cut here ]------------ [ 2.931121] WARNING: CPU: 1 PID: 65 at drivers/regulator/core.c:2104 _regulator_disable+0x140/0x184() [ 2.947174] unbalanced disables for pbias_mmc_omap4 [ 2.952331] Modules linked in: [ 2.952331] CPU: 1 PID: 65 Comm: kworker/u4:1 Tainted: G W 4.3.0-rc4-170972-g09ab7c8 #1 [ 2.952331] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 2.971405] Workqueue: deferwq deferred_probe_work_func [ 2.971435] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.985046] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 2.992675] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 3.001159] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 3.010314] [] (warn_slowpath_fmt) from [] (_regulator_disable+0x140/0x184) [ 3.019439] [] (_regulator_disable) from [] (regulator_disable+0x34/0x60) [ 3.028381] [] (regulator_disable) from [] (omap_hsmmc_set_power+0x158/0x1d4) [ 3.037719] [] (omap_hsmmc_set_power) from [] (omap_hsmmc_set_ios+0x204/0x264) [ 3.047149] [] (omap_hsmmc_set_ios) from [] (mmc_set_initial_state+0x48/0x4c) [ 3.056457] [] (mmc_set_initial_state) from [] (mmc_power_up+0x3c/0x104) [ 3.056457] [] (mmc_power_up) from [] (mmc_start_host+0x40/0x6c) [ 3.073394] [] (mmc_start_host) from [] (mmc_add_host+0x5c/0x84) [ 3.081542] [] (mmc_add_host) from [] (omap_hsmmc_probe+0x5cc/0xa10) [ 3.081542] [] (omap_hsmmc_probe) from [] (platform_drv_probe+0x48/0xa4) [ 3.098876] [] (platform_drv_probe) from [] (driver_probe_device+0x1dc/0x2a0) [ 3.108184] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 3.117126] [] (bus_for_each_drv) from [] (__device_attach+0xa4/0x108) [ 3.125823] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 3.134399] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x90) [ 3.143798] [] (deferred_probe_work_func) from [] (process_one_work+0x1b4/0x4b0) [ 3.153411] [] (process_one_work) from [] (worker_thread+0x154/0x470) [ 3.161987] [] (worker_thread) from [] (kthread+0xd4/0xf0) [ 3.169586] [] (kthread) from [] (ret_from_fork+0x14/0x24) [ 3.177154] ---[ end trace c1a4a116d5446fee ]--- [ 3.177154] omap_hsmmc 4809c000.mmc: pbias reg disable fail [ 3.208770] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 3.216033] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 3.222473] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 3.229370] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 3.238952] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 3.246612] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.248962] mmc1: new high speed SDHC card at address 0007 [ 3.250457] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 3.252929] mmcblk1: p1 p2 [ 3.270172] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 3.270202] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 3.288726] hw-breakpoint: CPU 0 failed to disable vector catch [ 3.399841] hctosys: unable to open rtc device (rtc0) [ 3.401214] sr_init: No PMIC hook to init smartreflex [ 3.412109] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.420776] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.429351] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.440521] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.464202] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.474151] mmc2: new SDIO card at address 0001 [ 3.481750] pbias_mmc_omap4: disabling [ 3.481750] vwl1271: disabling [ 3.492095] VAUX1_6030: disabling [ 3.497863] VMMC: disabling [ 3.502624] VDAC: disabling [ 3.506561] VANA: disabling [ 3.510559] VUSB: disabling [ 3.598968] mmcblk1: error -110 sending status command, retrying [ 3.631774] mmcblk1: error -110 sending status command, retrying [ 3.664520] mmcblk1: error -110 sending status command, aborting [ 3.734130] mmc1: tried to reset card [ 3.739624] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.752166] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.788604] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.796295] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 7.722869] EXT4-fs (mmcblk1p2): recovery complete [ 7.737243] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.745941] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.758544] devtmpfs: mounted [ 7.762390] Freeing unused kernel memory: 452K (c089f000 - c0910000) [ 8.070983] random: init urandom read with 31 bits of entropy available [ 8.094696] init: Failed to create pty - disabling logging for job [ 8.101226] init: Temporary process spawn error: No space left on device [ 8.153533] init: Failed to create pty - disabling logging for job [ 8.160339] init: Temporary process spawn error: No space left on device [ 8.179962] init: Failed to create pty - disabling logging for job [ 8.187164] init: Temporary process spawn error: No space left on device [ 8.199096] init: Failed to create pty - disabling logging for job [ 8.206176] init: Temporary process spawn error: No space left on device [ 8.276428] init: hwclock main process (84) terminated with status 1 [ 8.350830] init: ureadahead main process (85) terminated with status 5 [ 8.551361] init: Failed to create pty - disabling logging for job [ 8.559661] init: Temporary process spawn error: No space left on device [ 8.600189] init: Failed to create pty - disabling logging for job [ 8.606719] init: Temporary process spawn error: No space left on device [ 8.699493] init: Failed to create pty - disabling logging for job [ 8.706176] init: Temporary process spawn error: No space left on device [ 9.199279] udevd[140]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177409/963584 files, 2990375/7708672 blocks [ 12.365112] init: udev-fallback-graphics main process (398) terminated with status 1 [ 12.523498] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 12.619171] init: plymouth main process (86) killed by SEGV signal [ 12.631469] init: plymouth-splash main process (407) terminated with status 2 [ 12.784393] random: nonblocking pool is initialized mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 13.226867] init: plymouth-log main process (485) terminated with status 1 [ 13.278717] init: failsafe main process (488) killed by TERM signal [ 14.054382] init: plymouth-upstart-bridge main process (537) terminated with status 1 [ 14.318664] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.863616] init: bluetooth main process (544) terminated with status 1 [ 14.879638] init: bluetooth main process ended, respawning [ 14.960998] init: alsa-restore main process (578) terminated with status 19 [ 14.986267] init: hybrid-gfx main process (596) terminated with status 1 FATAL: Could not load /lib/modules/4.3.0-rc4-170972-g09ab7c8/modules.dep: No such file or directory [ 15.732086] init: bluetooth main process (672) terminated with status 1 [ 15.742248] init: bluetooth main process ended, respawning [ 15.989837] init: bluetooth main process (694) terminated with status 1 [ 15.997131] init: bluetooth main process ended, respawning [ 16.321014] init: bluetooth main process (715) terminated with status 1 [ 16.328033] init: bluetooth main process ended, respawning [ 16.509948] init: bluetooth main process (731) terminated with status 1 [ 16.517974] init: bluetooth main process ended, respawning [ 16.697357] init: bluetooth main process (747) terminated with status 1 [ 16.705322] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 17.149200] init: bluetooth main process (768) terminated with status 1 [ 17.164489] init: bluetooth main process ended, respawning