U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete m - CRC mode, 7(SOH)/3558(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00379a51 = 3643985 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3643921 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-rc4-170972-gc4384a9 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Fri Oct 23 13:07:59 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c09c4280, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67072 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @eee94000 s25088 r8192 d24064 u57344 [ 0.000000] pcpu-alloc: s25088 r8192 d24064 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259922 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001372K/1046528K available (6566K kernel code, 744K rwdata, 2228K rodata, 452K init, 8263K bss, 28772K reserved, 16384K cma-reserved, 251904K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc089ec78 (8796 kB) [ 0.000000] .init : 0xc089f000 - 0xc0910000 ( 452 kB) [ 0.000000] .data : 0xc0910000 - 0xc09ca218 ( 745 kB) [ 0.000000] .bss : 0xc09cd000 - 0xc11dee78 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002075] Console: colour dummy device 80x30 [ 0.002136] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002136] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002136] ... MAX_LOCK_DEPTH: 48 [ 0.002166] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002166] ... CLASSHASH_SIZE: 4096 [ 0.002166] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002166] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002197] ... CHAINHASH_SIZE: 32768 [ 0.002197] memory used by lock dependency info: 5167 kB [ 0.002197] per task-struct memory footprint: 1536 bytes [ 0.002227] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080261] pid_max: default: 32768 minimum: 301 [ 0.080657] Security Framework initialized [ 0.080810] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080810] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084106] Initializing cgroup subsys io [ 0.084228] Initializing cgroup subsys memory [ 0.084320] Initializing cgroup subsys devices [ 0.084411] Initializing cgroup subsys freezer [ 0.084564] Initializing cgroup subsys perf_event [ 0.084625] CPU: Testing write buffer coherency: ok [ 0.086090] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086151] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180267] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181030] Brought up 2 CPUs [ 0.181030] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181060] CPU: All CPU(s) started in SVC mode. [ 0.184509] devtmpfs: initialized [ 0.240325] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.245300] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.249908] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.432617] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.435241] pinctrl core: initialized pinctrl subsystem [ 0.440673] NET: Registered protocol family 16 [ 0.446044] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.470458] cpuidle: using governor ladder [ 0.500335] cpuidle: using governor menu [ 0.514221] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.515075] OMAP GPIO hardware version 0.1 [ 0.516326] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.518280] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.520172] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.522125] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.524017] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.545318] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.545867] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.553985] No ATAGs? [ 0.554077] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.554077] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.557281] OMAP DMA hardware revision 0.0 [ 0.615539] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.616607] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.617523] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.621826] SCSI subsystem initialized [ 0.622344] libata version 3.00 loaded. [ 0.623077] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.623626] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.623718] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.623809] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.624176] pps_core: LinuxPPS API ver. 1 registered [ 0.624206] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.624267] PTP clock support registered [ 0.628570] clocksource: Switched to clocksource 32k_counter [ 0.770050] NET: Registered protocol family 2 [ 0.772186] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.772369] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.774902] TCP: Hash tables configured (established 8192 bind 8192) [ 0.775238] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.775604] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.776672] NET: Registered protocol family 1 [ 0.778350] RPC: Registered named UNIX socket transport module. [ 0.778350] RPC: Registered udp transport module. [ 0.778381] RPC: Registered tcp transport module. [ 0.778381] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.783782] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.789367] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.789672] audit: initializing netlink subsys (disabled) [ 0.789916] audit: type=2000 audit(0.770:1): initialized [ 0.793640] VFS: Disk quotas dquot_6.6.0 [ 0.793975] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.796630] NFS: Registering the id_resolver key type [ 0.797119] Key type id_resolver registered [ 0.797149] Key type id_legacy registered [ 0.797363] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.802764] bounce: pool size: 64 pages [ 0.802886] io scheduler noop registered [ 0.802917] io scheduler deadline registered [ 0.802978] io scheduler cfq registered (default) [ 0.806579] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.807312] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.813751] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.819793] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.819824] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.820312] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.822174] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.822174] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.822448] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.823608] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.823638] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.823883] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.839935] console [ttyO2] enabled [ 1.876770] brd: module loaded [ 1.901977] loop: module loaded [ 1.908264] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.922210] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.932647] spi1.0 supply vdd-io not found, using dummy regulator [ 1.939514] spi1.0 supply vdd not found, using dummy regulator [ 1.945800] ks8851 spi1.0: message enable is 0 [ 1.956878] ks8851 spi1.0 eth0: revision 1, MAC c2:02:65:00:4c:66, IRQ 202, no EEPROM [ 1.969482] mousedev: PS/2 mouse device common for all mice [ 1.975341] i2c /dev entries driver [ 1.980621] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.986907] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.993774] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.003356] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.012847] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.020050] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.026184] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.032501] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.039367] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.048950] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.058410] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.065460] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.100677] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.106964] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.113861] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.123443] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.132934] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.139984] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.169036] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.175323] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.182250] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.192626] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.197448] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.203765] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.210632] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.220214] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.229705] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.236724] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.289459] ledtrig-cpu: registered to indicate activity on CPUs [ 2.297027] oprofile: using arm/armv7-ca9 [ 2.302124] Initializing XFRM netlink socket [ 2.307098] NET: Registered protocol family 10 [ 2.314941] sit: IPv6 over IPv4 tunneling driver [ 2.322082] NET: Registered protocol family 17 [ 2.326782] NET: Registered protocol family 15 [ 2.331909] Key type dns_resolver registered [ 2.336669] twl: not initialized [ 2.340087] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.348510] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.356903] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.365325] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.373748] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.382141] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.390563] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.398986] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.406188] omap2_set_init_voltage: unable to set vdd_mpu [ 2.411895] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.419219] omap2_set_init_voltage: unable to set vdd_core [ 2.424987] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.432189] omap2_set_init_voltage: unable to set vdd_iva [ 2.440155] Power Management for TI OMAP4+ devices. [ 2.445281] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.452667] ThumbEE CPU extension supported. [ 2.452667] Registering SWP/SWPB emulation handler [ 2.463378] SmartReflex Class3 initialized [ 2.472717] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.484374] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.491668] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.498840] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.508941] no flags found for reset [ 2.512695] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.520111] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.520111] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.537078] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.546844] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.554168] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.568756] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.569183] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.586395] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.593780] mmc0: new high speed SDHC card at address b368 [ 2.594665] twl 0-0048: PIH (irq 327) nested IRQs [ 2.607666] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.616485] mmcblk0: p1 p2 [ 2.623779] hw-breakpoint: CPU 1 failed to disable vector catch [ 2.639862] VUSIM: failed to get the current voltage(-22) [ 2.648681] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.657531] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.679840] twl6040 0-004b: clk32k is not handled [ 2.687988] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.702392] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.711486] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.720520] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.720520] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.733367] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.740234] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.749816] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.759307] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.766326] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.766326] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.778747] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.785583] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.795166] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.804656] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.811706] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.819671] ------------[ cut here ]------------ [ 2.819671] WARNING: CPU: 1 PID: 65 at drivers/regulator/core.c:2104 _regulator_disable+0x140/0x184() [ 2.834197] unbalanced disables for pbias_mmc_omap4 [ 2.834228] Modules linked in: [ 2.834228] CPU: 1 PID: 65 Comm: kworker/u4:1 Not tainted 4.3.0-rc4-170972-gc4384a9 #1 [ 2.850830] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 2.850830] Workqueue: deferwq deferred_probe_work_func [ 2.862426] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.870788] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 2.878387] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 2.886871] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 2.896026] [] (warn_slowpath_fmt) from [] (_regulator_disable+0x140/0x184) [ 2.905151] [] (_regulator_disable) from [] (regulator_disable+0x34/0x60) [ 2.914093] [] (regulator_disable) from [] (omap_hsmmc_set_power+0x158/0x1d4) [ 2.923431] [] (omap_hsmmc_set_power) from [] (omap_hsmmc_set_ios+0x204/0x264) [ 2.932830] [] (omap_hsmmc_set_ios) from [] (mmc_set_initial_state+0x48/0x4c) [ 2.942169] [] (mmc_set_initial_state) from [] (mmc_power_up+0x3c/0x104) [ 2.951019] [] (mmc_power_up) from [] (mmc_start_host+0x40/0x6c) [ 2.959167] [] (mmc_start_host) from [] (mmc_add_host+0x5c/0x84) [ 2.967285] [] (mmc_add_host) from [] (omap_hsmmc_probe+0x5cc/0xa10) [ 2.967285] [] (omap_hsmmc_probe) from [] (platform_drv_probe+0x48/0xa4) [ 2.967285] [] (platform_drv_probe) from [] (driver_probe_device+0x1dc/0x2a0) [ 2.993896] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 3.002868] [] (bus_for_each_drv) from [] (__device_attach+0xa4/0x108) [ 3.011566] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 3.011596] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x90) [ 3.011596] [] (deferred_probe_work_func) from [] (process_one_work+0x1b4/0x4b0) [ 3.039154] [] (process_one_work) from [] (worker_thread+0x154/0x470) [ 3.039154] [] (worker_thread) from [] (kthread+0xd4/0xf0) [ 3.055297] [] (kthread) from [] (ret_from_fork+0x14/0x24) [ 3.062866] ---[ end trace 801fd2db3a86c8e4 ]--- [ 3.067718] omap_hsmmc 4809c000.mmc: pbias reg disable fail [ 3.099426] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 3.105712] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 3.112609] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 3.112609] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 3.112609] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 3.138702] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 3.205932] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.216766] mmc1: new high speed SDHC card at address 0007 [ 3.223937] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 3.231811] mmcblk1: p1 p2 [ 3.280578] hctosys: unable to open rtc device (rtc0) [ 3.286102] sr_init: No PMIC hook to init smartreflex [ 3.291442] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.291778] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.291778] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.291778] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.336517] pbias_mmc_omap4: disabling [ 3.341827] VAUX1_6030: disabling [ 3.347625] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.347869] VMMC: disabling [ 3.349395] VDAC: disabling [ 3.350280] VANA: disabling [ 3.351165] VUSB: disabling [ 3.371185] mmc2: new SDIO card at address 0001 [ 3.451049] mmcblk1: error -110 sending status command, retrying [ 3.483825] mmcblk1: error -110 sending status command, retrying [ 3.516662] mmcblk1: error -110 sending status command, aborting [ 3.602905] mmc1: tried to reset card [ 3.608551] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.620635] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.654693] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.664581] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 6.676574] EXT4-fs (mmcblk1p2): recovery complete [ 6.690185] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.699127] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 6.712585] devtmpfs: mounted [ 6.712585] Freeing unused kernel memory: 452K (c089f000 - c0910000) [ 7.026153] random: init urandom read with 30 bits of entropy available [ 7.048767] init: Failed to create pty - disabling logging for job [ 7.055480] init: Temporary process spawn error: No space left on device [ 7.110931] init: Failed to create pty - disabling logging for job [ 7.116882] init: Temporary process spawn error: No space left on device [ 7.137573] init: Failed to create pty - disabling logging for job [ 7.144805] init: Temporary process spawn error: No space left on device [ 7.155578] init: Failed to create pty - disabling logging for job [ 7.163604] init: Temporary process spawn error: No space left on device [ 7.242553] init: hwclock main process (84) terminated with status 1 [ 7.310760] init: ureadahead main process (85) terminated with status 5 [ 7.508605] init: Failed to create pty - disabling logging for job [ 7.515289] init: Temporary process spawn error: No space left on device [ 7.556762] init: Failed to create pty - disabling logging for job [ 7.563598] init: Temporary process spawn error: No space left on device [ 7.655548] init: Failed to create pty - disabling logging for job [ 7.662475] init: Temporary process spawn error: No space left on device [ 8.125854] udevd[140]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177411/963584 files, 2990534/7708672 blocks [ 11.462097] init: udev-fallback-graphics main process (419) terminated with status 1 [ 11.512237] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.717468] init: plymouth main process (86) killed by SEGV signal [ 11.729339] init: plymouth-splash main process (433) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 11.978485] random: nonblocking pool is initialized [ 12.172332] init: plymouth-log main process (484) terminated with status 1 [ 12.240631] init: failsafe main process (487) killed by TERM signal [ 13.005584] init: plymouth-upstart-bridge main process (536) terminated with status 1 [ 13.244110] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 13.769714] init: alsa-restore main process (569) terminated with status 19 [ 13.798828] init: hybrid-gfx main process (583) terminated with status 1 [ 14.146270] init: bluetooth main process (543) terminated with status 1 [ 14.153656] init: bluetooth main process ended, respawning FATAL: Could not load /lib/modules/4.3.0-rc4-170972-gc4384a9/modules.dep: No such file or directory [ 14.694641] init: bluetooth main process (670) terminated with status 1 [ 14.707244] init: bluetooth main process ended, respawning [ 14.883331] init: bluetooth main process (694) terminated with status 1 [ 14.891143] init: bluetooth main process ended, respawning [ 15.064880] init: bluetooth main process (710) terminated with status 1 [ 15.072113] init: bluetooth main process ended, respawning [ 15.335388] init: bluetooth main process (727) terminated with status 1 [ 15.346099] init: bluetooth main process ended, respawning [ 15.660766] init: bluetooth main process (747) terminated with status 1 [ 15.669128] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: