U-Boot SPL 2014.07-rc2-00015-g713ff68 (Jun 03 2014 - 09:09:41) OMAP5432 ES2.0 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img U-Boot 2014.07-rc2-00015-g713ff68 (Jun 03 2014 - 09:09:41), Build: jenkins-github_Bootloader-Builder-315 CPU : OMAP5432 ES2.0 Board: OMAP5432 uEVM I2C: ready DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: No ethernet found. Hit any key to stop autoboot: 5  0 U-Boot# U-Boot# setenv bootargs 'console=ttyO2,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh' U-Boot# loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap5-uevm Sending: Transfer complete - CRC mode, 9(SOH)/3437(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0035b760 = 3520352 Bytes U-Boot# bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3520288 Bytes = 3.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc1-156533-g79c6b79 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Jul 23 08:05:48 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI OMAP5 uEVM board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xfd800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 519936 [ 0.000000] free_area_init_node: node 0, pgdat c0970980, node_mem_map ee61d000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 325376 pages, LIFO batch:31 [ 0.000000] OMAP5432 ES2.0 [ 0.000000] PERCPU: Embedded 13 pages/cpu @ee5af000 s20672 r8192 d24384 u53248 [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518226 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2025860K/2079744K available (6297K kernel code, 740K rwdata, 2188K rodata, 432K init, 8225K bss, 37500K reserved, 16384K cma-reserved, 1285120K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0851868 (8487 kB) [ 0.000000] .init : 0xc0852000 - 0xc08be000 ( 432 kB) [ 0.000000] .data : 0xc08be000 - 0xc0977020 ( 741 kB) [ 0.000000] .bss : 0xc097a000 - 0xc11826d0 (8226 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000457] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000488] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16ac02862, max_idle_ns: 440795202218 ns [ 0.000493] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511085ns [ 0.000504] Switching to timer-based delay loop, resolution 162ns [ 0.001624] Console: colour dummy device 80x30 [ 0.001658] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001665] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001671] ... MAX_LOCK_DEPTH: 48 [ 0.001678] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001684] ... CLASSHASH_SIZE: 4096 [ 0.001690] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001696] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001701] ... CHAINHASH_SIZE: 32768 [ 0.001708] memory used by lock dependency info: 5167 kB [ 0.001714] per task-struct memory footprint: 1536 bytes [ 0.001732] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440) [ 0.001745] pid_max: default: 32768 minimum: 301 [ 0.002022] Security Framework initialized [ 0.002123] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002134] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004310] Initializing cgroup subsys blkio [ 0.004334] Initializing cgroup subsys memory [ 0.004399] Initializing cgroup subsys devices [ 0.004457] Initializing cgroup subsys freezer [ 0.004542] Initializing cgroup subsys perf_event [ 0.004592] CPU: Testing write buffer coherency: ok [ 0.005493] /cpus/cpu@0 missing clock-frequency property [ 0.005512] /cpus/cpu@1 missing clock-frequency property [ 0.005523] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005581] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.010259] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.010905] Brought up 2 CPUs [ 0.010918] SMP: Total of 2 processors activated (24.57 BogoMIPS). [ 0.010925] CPU: All CPU(s) started in SVC mode. [ 0.013083] devtmpfs: initialized [ 0.054642] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.055966] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.057200] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.166877] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.167917] pinctrl core: initialized pinctrl subsystem [ 0.171439] NET: Registered protocol family 16 [ 0.174961] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.201033] cpuidle: using governor ladder [ 0.230999] cpuidle: using governor menu [ 0.240323] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.241011] OMAP GPIO hardware version 0.1 [ 0.241883] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.243364] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.244770] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.246165] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.247592] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.248997] gpiochip_add: registered GPIOs 192 to 223 on device: gpio [ 0.250394] gpiochip_add: registered GPIOs 224 to 255 on device: gpio [ 0.251411] platform 50000000.gpmc: Cannot lookup hwmod 'gpmc' [ 0.251617] omap-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 0.251633] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.251712] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x10000000 [ 0.256900] irq: no irq domain found for /ocp/l4@4a000000/scm@2800/pinmux@40 ! [ 0.277626] No ATAGs? [ 0.277683] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.277693] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.279741] OMAP DMA hardware revision 0.0 [ 0.332499] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.333208] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-mmcsd[0]' [ 0.337008] SCSI subsystem initialized [ 0.337352] libata version 3.00 loaded. [ 0.337934] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 0.337944] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 0.337977] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 0.338027] no flags found for reset [ 0.338040] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 0.338048] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 0.338059] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 0.338070] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 0.338079] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 0.338141] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 0.338187] hsusb2_phy supply vcc not found, using dummy regulator [ 0.338543] usb_phy_generic hsusb3_phy: GPIO lookup for consumer reset [ 0.338552] usb_phy_generic hsusb3_phy: using device tree for GPIO lookup [ 0.338576] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb3_phy[0]' - status (0) [ 0.338589] no flags found for reset [ 0.338600] usb_phy_generic hsusb3_phy: GPIO lookup for consumer vbus-detect [ 0.338608] usb_phy_generic hsusb3_phy: using device tree for GPIO lookup [ 0.338618] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb3_phy[0]' [ 0.338628] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb3_phy[0]' [ 0.338637] usb_phy_generic hsusb3_phy: using lookup tables for GPIO lookup [ 0.338647] usb_phy_generic hsusb3_phy: lookup for GPIO vbus-detect failed [ 0.338681] hsusb3_phy supply vcc not found, using dummy regulator [ 0.339225] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@2800/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.340424] omap_i2c 48072000.i2c: bus 1 rev0.12 at 100 kHz [ 0.341304] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz [ 0.342017] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 100 kHz [ 0.342093] omap_i2c 4807c000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@2800/pinmux@40/pinmux_i2c5_pins, deferring probe [ 0.345229] clocksource: Switched to clocksource arch_sys_counter [ 0.457451] NET: Registered protocol family 2 [ 0.458748] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.458875] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.461222] TCP: Hash tables configured (established 8192 bind 8192) [ 0.461371] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.461688] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.462621] NET: Registered protocol family 1 [ 0.463526] RPC: Registered named UNIX socket transport module. [ 0.463536] RPC: Registered udp transport module. [ 0.463545] RPC: Registered tcp transport module. [ 0.463552] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.491030] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 0.491089] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.495345] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.495591] audit: initializing netlink subsys (disabled) [ 0.495704] audit: type=2000 audit(0.490:1): initialized [ 0.498614] VFS: Disk quotas dquot_6.6.0 [ 0.498719] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.500485] NFS: Registering the id_resolver key type [ 0.500708] Key type id_resolver registered [ 0.500718] Key type id_legacy registered [ 0.500829] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.503809] bounce: pool size: 64 pages [ 0.503863] io scheduler noop registered [ 0.503878] io scheduler deadline registered [ 0.503908] io scheduler cfq registered (default) [ 0.508947] pinctrl-single 4a002840.pinmux: 219 pins at pa fc002840 size 438 [ 0.509379] pinctrl-single 4ae0c840.pinmux: 28 pins at pa fce0c840 size 56 [ 0.513671] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.518191] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.518206] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.518534] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 306, base_baud = 3000000) is a OMAP UART0 [ 0.519746] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.519759] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.519945] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 307, base_baud = 3000000) is a OMAP UART1 [ 0.520831] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.521017] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 308, base_baud = 3000000) is a OMAP UART2 [ 1.666221] console [ttyO2] enabled [ 1.670809] omap_uart 4806e000.serial: no wakeirq for uart3 [ 1.676669] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 1.686729] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 309, base_baud = 3000000) is a OMAP UART3 [ 1.697404] omap_uart 48066000.serial: no wakeirq for uart4 [ 1.703229] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48066000[0]' [ 1.713248] 48066000.serial: ttyO4 at MMIO 0x48066000 (irq = 310, base_baud = 3000000) is a OMAP UART4 [ 1.723786] omap_uart 48068000.serial: no wakeirq for uart5 [ 1.729630] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48068000[0]' [ 1.739640] 48068000.serial: ttyO5 at MMIO 0x48068000 (irq = 311, base_baud = 3000000) is a OMAP UART5 [ 1.769516] brd: module loaded [ 1.784965] loop: module loaded [ 1.790496] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 1.797529] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.806447] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 1.818558] scsi host0: ahci [ 1.822435] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 338 [ 1.831763] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.846888] mousedev: PS/2 mouse device common for all mice [ 1.852715] i2c /dev entries driver [ 1.859008] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.865307] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.872122] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.881687] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.891143] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.898170] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 1.904265] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.910546] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.917378] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.926934] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.936395] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.943395] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 1.950059] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.986101] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 1.992371] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 1.999222] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.008785] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.018260] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.025277] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.031370] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.037670] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.044486] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.054043] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.063522] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.070537] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.115322] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer cd [ 2.121641] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.128529] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.138098] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.147605] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.154645] omap_hsmmc 480ad000.mmc: lookup for GPIO cd failed [ 2.160788] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.167111] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.173961] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.175106] ata1: SATA link down (SStatus 0 SControl 300) [ 2.189242] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.198745] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.205797] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.212265] 480ad000.mmc supply vmmc not found, using dummy regulator [ 2.219430] omap_hsmmc 480ad000.mmc: could not set regulator OCR (-22) [ 2.265470] ledtrig-cpu: registered to indicate activity on CPUs [ 2.273687] oprofile: using timer interrupt. [ 2.278572] Initializing XFRM netlink socket [ 2.283107] NET: Registered protocol family 17 [ 2.287832] NET: Registered protocol family 15 [ 2.292564] mmc0: MAN_BKOPS_EN bit is not set [ 2.292760] Key type dns_resolver registered [ 2.292903] omap_vc_init_channel: No PMIC info for vdd_core [ 2.292907] omap_vp_init: No PMIC info for vdd_core [ 2.292921] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.292924] omap_vp_init: No PMIC info for vdd_mm [ 2.292938] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.292940] omap_vp_init: No PMIC info for vdd_mpu [ 2.293609] Power Management for TI OMAP4+ devices. [ 2.293859] ThumbEE CPU extension supported. [ 2.293880] Registering SWP/SWPB emulation handler [ 2.293889] SmartReflex Class3 initialized [ 2.308775] palmas 0-0048: Irq flag is 0x00000000 [ 2.359932] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.368193] mmc0: new high speed MMC card at address 0001 [ 2.375360] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.380527] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.387217] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.442948] twl6040 0-004b: clk32k is not handled [ 2.450376] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.464841] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.472676] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.478933] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.485252] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.492102] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.501684] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.511183] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.518230] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.524348] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.530659] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.537516] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.547104] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.556596] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.563621] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.616817] hctosys: unable to open rtc device (rtc0) [ 2.622124] sr_init: No PMIC hook to init smartreflex [ 2.627665] sr_init: platform driver register failed for SR [ 2.663554] ldo8: disabling [ 2.667664] ldo3: disabling [ 2.674321] Waiting for root device /dev/mmcblk1p2... [ 2.687992] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.696546] mmc2: new SD card at address d91a [ 2.701966] mmcblk1: mmc2:d91a SU02G 1.84 GiB [ 2.708922] mmcblk1: p1 p2 [ 2.786821] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.798014] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.827766] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.836353] VFS: Mounted root (ext4 filesystem) readonly on device 179:26. [ 2.856927] devtmpfs: mounted [ 2.860430] Freeing unused kernel memory: 432K (c0852000 - c08be000) /bin/sh: 0: can't access tty; job control turned off # # #