U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete - CRC mode, 9(SOH)/4320(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00438321 = 4424481 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4424417 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.16.0-rc7-next-20140729-89426-gb4cf577 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Jul 30 12:54:03 MDT 2014 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c08bf900, node_mem_map edff1000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 526 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/mach-omap2/omap4-common.c:172 omap4_l2c310_write_sec+0x5c/0x98() [ 0.000000] OMAP L2C310: ignoring write to reg 0xf80 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.16.0-rc7-next-20140729-89426-gb4cf577 #1 [ 0.000000] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.000000] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.000000] [] (dump_stack) from [] (warn_slowpath_common+0x68/0x8c) [ 0.000000] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.000000] [] (warn_slowpath_fmt) from [] (omap4_l2c310_write_sec+0x5c/0x98) [ 0.000000] [] (omap4_l2c310_write_sec) from [] (l2c310_enable+0x13c/0x1fc) [ 0.000000] [] (l2c310_enable) from [] (__l2c_init+0x168/0x1f0) [ 0.000000] [] (__l2c_init) from [] (l2x0_of_init+0x178/0x1ac) [ 0.000000] [] (l2x0_of_init) from [] (omap_l2_cache_init+0x44/0x9c) [ 0.000000] [] (omap_l2_cache_init) from [] (omap4430_init_early+0x6c/0xa0) [ 0.000000] [] (omap4430_init_early) from [] (setup_arch+0x8e4/0x9c0) [ 0.000000] [] (setup_arch) from [] (start_kernel+0x7c/0x3ac) [ 0.000000] [] (start_kernel) from [<80008074>] (0x80008074) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edf9e000 s14336 r8192 d14336 u36864 [ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1004576K/1047552K available (5684K kernel code, 652K rwdata, 2200K rodata, 406K init, 8210K bss, 42976K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07bb2a0 (7885 kB) [ 0.000000] .init : 0xc07bc000 - 0xc0821800 ( 406 kB) [ 0.000000] .data : 0xc0822000 - 0xc08c5330 ( 653 kB) [ 0.000000] .bss : 0xc08c5330 - 0xc10c9e20 (8211 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000122] smp_twd: clock not found -2 [ 0.001617] Console: colour dummy device 80x30 [ 0.001647] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001678] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001678] ... MAX_LOCK_DEPTH: 48 [ 0.001678] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001678] ... CLASSHASH_SIZE: 4096 [ 0.001708] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001708] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001708] ... CHAINHASH_SIZE: 32768 [ 0.001739] memory used by lock dependency info: 5167 kB [ 0.001739] per task-struct memory footprint: 1152 bytes [ 0.001770] Calibrating local timer... 347.73MHz. [ 0.059051] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.148468] pid_max: default: 32768 minimum: 301 [ 0.148864] Security Framework initialized [ 0.149017] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.149017] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.151306] CPU: Testing write buffer coherency: ok [ 0.152343] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152435] Setting up static identity map for 0x80562880 - 0x805628f0 [ 0.157867] CPU1: Booted secondary processor [ 0.188201] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.188781] Brought up 2 CPUs [ 0.188812] SMP: Total of 2 processors activated. [ 0.188812] CPU: All CPU(s) started in SVC mode. [ 0.191467] devtmpfs: initialized [ 0.200927] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.205108] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.209045] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.260498] ------------[ cut here ]------------ [ 0.260528] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x3a0/0x3f0() [ 0.260528] omap_hwmod: mailbox: doesn't have mpu register target base [ 0.260559] Modules linked in: [ 0.260559] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.16.0-rc7-next-20140729-89426-gb4cf577 #1 [ 0.260620] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.260650] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.260650] [] (dump_stack) from [] (warn_slowpath_common+0x68/0x8c) [ 0.260681] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.260711] [] (warn_slowpath_fmt) from [] (_init+0x3a0/0x3f0) [ 0.260742] [] (_init) from [] (omap_hwmod_for_each+0x30/0x5c) [ 0.260742] [] (omap_hwmod_for_each) from [] (__omap_hwmod_setup_all+0x24/0x40) [ 0.260772] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x80/0x1bc) [ 0.260772] [] (do_one_initcall) from [] (kernel_init_freeable+0xf8/0x1c8) [ 0.260803] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.260833] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.260833] ---[ end trace cb88537fdc8fa201 ]--- [ 0.373138] pinctrl core: initialized pinctrl subsystem [ 0.375701] regulator-dummy: no parameters [ 0.418731] NET: Registered protocol family 16 [ 0.424530] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.426635] cpuidle: using governor ladder [ 0.426666] cpuidle: using governor menu [ 0.441040] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.441864] OMAP GPIO hardware version 0.1 [ 0.442993] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.444641] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.446350] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.447967] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.449645] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.450958] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.469757] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.470245] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.472320] No ATAGs? [ 0.472412] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.472442] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.474884] OMAP DMA hardware revision 0.0 [ 0.522216] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.522277] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.556823] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.557678] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]' [ 0.558288] VDD_ETH: 3300 mV [ 0.562683] SCSI subsystem initialized [ 0.563415] usbcore: registered new interface driver usbfs [ 0.563598] usbcore: registered new interface driver hub [ 0.564514] usbcore: registered new device driver usb [ 0.579956] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.581024] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.582794] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.583648] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.588073] Switched to clocksource 32k_counter [ 0.724731] NET: Registered protocol family 2 [ 0.726593] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.726837] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.729553] TCP: Hash tables configured (established 8192 bind 8192) [ 0.729797] TCP: reno registered [ 0.729827] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.730194] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.731597] NET: Registered protocol family 1 [ 0.732696] RPC: Registered named UNIX socket transport module. [ 0.732696] RPC: Registered udp transport module. [ 0.732727] RPC: Registered tcp transport module. [ 0.732727] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.738983] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.742950] VFS: Disk quotas dquot_6.5.2 [ 0.743072] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.745025] NFS: Registering the id_resolver key type [ 0.745391] Key type id_resolver registered [ 0.745391] Key type id_legacy registered [ 0.745544] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.746063] msgmni has been set to 1468 [ 0.750061] bounce: pool size: 64 pages [ 0.750152] io scheduler noop registered [ 0.750183] io scheduler deadline registered [ 0.750305] io scheduler cfq registered (default) [ 0.752716] omap-usb2 4a0ad080.usb2phy: unable to get wkupclk, trying old name [ 0.752746] omap-usb2 4a0ad080.usb2phy: found usb_phy_cm_clk32k, please fix DTS [ 0.754608] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.755065] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.757385] pbias_mmc_omap4: 1800 <--> 3000 mV at 3000 mV [ 0.758911] abb_mpu: 1025 <--> 1389 mV [ 0.759765] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.765441] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.765472] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.765899] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.767425] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.767425] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.767639] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.768859] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.768859] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.769104] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.977722] console [ttyO2] enabled [ 1.982604] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.988525] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 1.998657] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 2.030548] brd: module loaded [ 2.046173] loop: module loaded [ 2.051330] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.061706] twl 0-0048: PIH (irq 39) nested IRQs [ 2.069183] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 2.076507] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 2.083831] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 2.091033] VMMC: 1200 <--> 3000 mV at 3000 mV [ 2.097625] VPP: 1800 <--> 2500 mV at 1900 mV [ 2.104309] VUSIM: 1200 <--> 2900 mV [ 2.109680] VDAC: 1800 mV [ 2.113677] VANA: 2100 mV [ 2.118347] VCXIO: 1800 mV [ 2.122467] VUSB: 3300 mV [ 2.126861] V1V8: 1800 mV [ 2.131439] V2V1: 2100 mV [ 2.139556] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.153137] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 2.163574] spi1.0 supply vdd-io not found, using dummy regulator [ 2.170593] ks8851 spi1.0: message enable is 0 [ 2.181060] ks8851 spi1.0 eth0: revision 1, MAC 32:fa:d5:c8:cd:a1, IRQ 331, no EEPROM [ 2.191558] usbcore: registered new interface driver asix [ 2.197357] usbcore: registered new interface driver ax88179_178a [ 2.203887] usbcore: registered new interface driver cdc_ether [ 2.210174] usbcore: registered new interface driver smsc95xx [ 2.216308] usbcore: registered new interface driver net1080 [ 2.222381] usbcore: registered new interface driver cdc_subset [ 2.228729] usbcore: registered new interface driver zaurus [ 2.234741] usbcore: registered new interface driver cdc_ncm [ 2.241607] usbcore: registered new interface driver cdc_wdm [ 2.247711] usbcore: registered new interface driver usb-storage [ 2.254211] usbcore: registered new interface driver usbtest [ 2.262145] mousedev: PS/2 mouse device common for all mice [ 2.271057] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.278717] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.288818] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.298095] i2c /dev entries driver [ 2.304351] Driver for 1-wire Dallas network protocol. [ 2.313293] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.322143] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.331726] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.378112] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.387908] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.397949] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.404876] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.412261] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.445922] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.456726] mmc0: new high speed SDHC card at address 0007 [ 2.464630] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.468902] ledtrig-cpu: registered to indicate activity on CPUs [ 2.469390] usbcore: registered new interface driver usbhid [ 2.469390] usbhid: USB HID core driver [ 2.470916] oprofile: no performance counters [ 2.472198] oprofile: using timer interrupt. [ 2.472808] TCP: cubic registered [ 2.472808] Initializing XFRM netlink socket [ 2.472930] NET: Registered protocol family 17 [ 2.472991] NET: Registered protocol family 15 [ 2.473266] Key type dns_resolver registered [ 2.474090] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.474121] omap2_set_init_voltage: unable to set vdd_mpu [ 2.474121] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.474121] omap2_set_init_voltage: unable to set vdd_core [ 2.474151] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.474151] omap2_set_init_voltage: unable to set vdd_iva [ 2.476074] Power Management for TI OMAP4+ devices. [ 2.476135] Power Management for TI OMAP4. [ 2.476135] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.573730] ThumbEE CPU extension supported. [ 2.578491] Registering SWP/SWPB emulation handler [ 2.579956] SmartReflex Class3 initialized [ 2.588348] mmcblk0: p1 p2 [ 2.598663] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.608642] sr_init: No PMIC hook to init smartreflex [ 2.614013] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.623077] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.631774] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 2.640075] omap_hsmmc 480d5000.mmc: exceeding card's volts [ 2.676666] VUSB: disabling [ 2.680358] VANA: disabling [ 2.683990] VDAC: disabling [ 2.689636] VAUX1_6030: disabling [ 2.695098] Waiting for root device /dev/mmcblk1p2... [ 2.718719] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.728546] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.857788] mmc1: host does not support reading read-only switch. assuming write-enable. [ 2.868164] mmc1: new high speed SDHC card at address b368 [ 2.874999] mmcblk1: mmc1:b368 USD 3.75 GiB [ 2.882904] mmcblk1: p1 p2 [ 2.930572] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.941741] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 2.955444] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 2.963378] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 4.092864] EXT4-fs (mmcblk1p2): recovery complete [ 4.556976] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.565734] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 4.575347] devtmpfs: mounted [ 4.575347] Freeing unused kernel memory: 404K (c07bc000 - c0821000) modprobe: FATAL: Could not load /lib/modules/3.16.0-rc7-next-20140729-89426-gb4cf577/modules.dep: No such file or directory INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 5.739929] udevd[861]: starting version 172 . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...[ 6.372741] mmcblk0: r/w command failed, status = 0x80000900 [ 6.379089] end_request: I/O error, dev mmcblk0, sector 15564536 [ 6.385559] Buffer I/O error on device mmcblk0, logical block 1945567 [ 6.766448] random: nonblocking pool is initialized done. Activating swap...done. [ 7.481597] EXT4-fs (mmcblk1p2): warning: mounting fs with errors, running e2fsck is recommended [ 7.846130] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux 2.19.1 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...done. Cleaning up temporary files.... Setting kernel variables ...done. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Debian GNU/Linux wheezy/sid armel ttyO2 armel login: