U-Boot SPL 2014.07-rc2-00015-g713ff68 (Jun 03 2014 - 09:09:41) OMAP5432 ES2.0 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img U-Boot 2014.07-rc2-00015-g713ff68 (Jun 03 2014 - 09:09:41), Build: jenkins-github_Bootloader-Builder-315 CPU : OMAP5432 ES2.0 Board: OMAP5432 uEVM I2C: ready DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: No ethernet found. Hit any key to stop autoboot: 5  0 U-Boot# U-Boot# setenv bootargs 'console=ttyO2,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh' U-Boot# loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap5-uevm Sending: Transfer complete - CRC mode, 3(SOH)/4690(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0049487e = 4802686 Bytes U-Boot# bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4802622 Bytes = 4.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.18.0-rc1-103807-g1f074f9 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Fri Nov 21 11:14:26 MST 2014 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI OMAP5 uEVM board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at fd800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 519936 [ 0.000000] free_area_init_node: node 0, pgdat c0974940, node_mem_map ee819000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2542 pages used for memmap [ 0.000000] HighMem zone: 325376 pages, LIFO batch:31 [ 0.000000] OMAP5432 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @ee7b1000 s14976 r8192 d21888 u45056 [ 0.000000] pcpu-alloc: s14976 r8192 d21888 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518416 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 4159488 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 2023812K/2079744K available (6251K kernel code, 681K rwdata, 2320K rodata, 420K init, 8264K bss, 55932K reserved, 1285120K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0866f54 (8572 kB) [ 0.000000] .init : 0xc0867000 - 0xc08d0000 ( 420 kB) [ 0.000000] .data : 0xc08d0000 - 0xc097a410 ( 682 kB) [ 0.000000] .bss : 0xc097a410 - 0xc118c468 (8265 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001342] Console: colour dummy device 80x30 [ 0.001373] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001373] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001373] ... MAX_LOCK_DEPTH: 48 [ 0.001373] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001403] ... CLASSHASH_SIZE: 4096 [ 0.001403] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001403] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001403] ... CHAINHASH_SIZE: 32768 [ 0.001403] memory used by lock dependency info: 5167 kB [ 0.001434] per task-struct memory footprint: 1152 bytes [ 0.001434] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896) [ 0.060455] pid_max: default: 32768 minimum: 301 [ 0.060760] Security Framework initialized [ 0.060882] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.060882] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.062774] Initializing cgroup subsys memory [ 0.062805] Initializing cgroup subsys devices [ 0.062866] Initializing cgroup subsys freezer [ 0.062927] Initializing cgroup subsys blkio [ 0.062957] Initializing cgroup subsys perf_event [ 0.063018] CPU: Testing write buffer coherency: ok [ 0.063812] /cpus/cpu@0 missing clock-frequency property [ 0.063812] /cpus/cpu@1 missing clock-frequency property [ 0.063842] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.063903] Setting up static identity map for 0x805ec800 - 0x805ec870 [ 0.067840] CPU1: Booted secondary processor [ 0.120574] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.121032] Brought up 2 CPUs [ 0.121063] SMP: Total of 2 processors activated. [ 0.121063] CPU: All CPU(s) started in SVC mode. [ 0.122985] devtmpfs: initialized [ 0.132568] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.133880] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.135040] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.245056] pinctrl core: initialized pinctrl subsystem [ 0.246765] regulator-dummy: no parameters [ 0.284973] NET: Registered protocol family 16 [ 0.288330] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.310974] cpuidle: using governor ladder [ 0.340972] cpuidle: using governor menu [ 0.348358] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.349060] OMAP GPIO hardware version 0.1 [ 0.349884] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.351257] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.352569] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.353912] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.355224] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.356567] gpiochip_add: registered GPIOs 192 to 223 on device: gpio [ 0.357849] gpiochip_add: registered GPIOs 224 to 255 on device: gpio [ 0.358795] platform 50000000.gpmc: Cannot lookup hwmod 'gpmc' [ 0.358978] omap-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 0.358978] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.359069] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x10000000 [ 0.381835] No ATAGs? [ 0.381896] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.381927] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.383758] OMAP DMA hardware revision 0.0 [ 0.425292] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.425323] edma-dma-engine: probe of edma-dma-engine.0 failed with error -22 [ 0.451049] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.451721] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-mmcsd[0]' [ 0.452087] vmmcsd_fixed: 3000 mV [ 0.455108] SCSI subsystem initialized [ 0.455627] usbcore: registered new interface driver usbfs [ 0.455780] usbcore: registered new interface driver hub [ 0.455902] usbcore: registered new device driver usb [ 0.456207] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 0.456237] hsusb2_phy supply vcc not found, using dummy regulator [ 0.456634] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb3_phy[0]' - status (0) [ 0.456695] hsusb3_phy supply vcc not found, using dummy regulator [ 0.457305] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a002840/pinmux_i2c1_pins, deferring probe [ 0.457336] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.458160] omap_i2c 48072000.i2c: bus 1 rev0.12 at 100 kHz [ 0.458831] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz [ 0.459381] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 100 kHz [ 0.459472] omap_i2c 4807c000.i2c: could not find pctldev for node /ocp/pinmux@4a002840/pinmux_i2c5_pins, deferring probe [ 0.459472] platform 4807c000.i2c: Driver omap_i2c requests probe deferral [ 0.462402] Switched to clocksource 32k_counter [ 0.563812] NET: Registered protocol family 2 [ 0.564971] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.565155] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.567474] TCP: Hash tables configured (established 8192 bind 8192) [ 0.567596] TCP: reno registered [ 0.567626] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.567932] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.568908] NET: Registered protocol family 1 [ 0.569610] RPC: Registered named UNIX socket transport module. [ 0.569610] RPC: Registered udp transport module. [ 0.569641] RPC: Registered tcp transport module. [ 0.569641] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.570495] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.574523] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.574737] audit: initializing netlink subsys (disabled) [ 0.574859] audit: type=2000 audit(0.560:1): initialized [ 0.577484] VFS: Disk quotas dquot_6.5.2 [ 0.577575] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.579010] NFS: Registering the id_resolver key type [ 0.579223] Key type id_resolver registered [ 0.579223] Key type id_legacy registered [ 0.579345] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.580383] msgmni has been set to 1442 [ 0.582641] bounce: pool size: 64 pages [ 0.582702] io scheduler noop registered [ 0.582702] io scheduler deadline registered [ 0.582763] io scheduler cfq registered (default) [ 0.588195] pinctrl-single 4a002840.pinmux: 219 pins at pa fc002840 size 438 [ 0.588592] pinctrl-single 4ae0c840.pinmux: 28 pins at pa fce0c840 size 56 [ 0.591033] pbias_mmc_omap5: 1800 <--> 3000 mV at 3000 mV [ 0.592102] abb_mpu: 1060 <--> 1250 mV [ 0.592773] abb_mm: 1025 <--> 1120 mV [ 0.593811] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.597869] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.597900] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.598175] omap_uart 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.599182] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.599212] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.599365] omap_uart 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.600158] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.600189] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.600372] omap_uart 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.614166] console [ttyO2] enabled [ 1.618774] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.624633] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 1.634643] omap_uart 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.646179] omap_uart 48066000.serial: no wakeirq for uart0 [ 1.652008] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48066000[0]' [ 1.661987] omap_uart 48066000.serial: ttyO4 at MMIO 0x48066000 (irq = 137, base_baud = 3000000) is a OMAP UART4 [ 1.673370] omap_uart 48068000.serial: no wakeirq for uart0 [ 1.679199] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48068000[0]' [ 1.689178] omap_uart 48068000.serial: ttyO5 at MMIO 0x48068000 (irq = 138, base_baud = 3000000) is a OMAP UART5 [ 1.716308] brd: module loaded [ 1.728424] loop: module loaded [ 1.733825] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.745758] usbcore: registered new interface driver asix [ 1.751464] usbcore: registered new interface driver ax88179_178a [ 1.757965] usbcore: registered new interface driver cdc_ether [ 1.764190] usbcore: registered new interface driver smsc95xx [ 1.770263] usbcore: registered new interface driver net1080 [ 1.776275] usbcore: registered new interface driver cdc_subset [ 1.782562] usbcore: registered new interface driver zaurus [ 1.788513] usbcore: registered new interface driver cdc_ncm [ 1.795013] usbcore: registered new interface driver cdc_wdm [ 1.801025] usbcore: registered new interface driver usb-storage [ 1.807434] usbcore: registered new interface driver usbtest [ 1.814758] mousedev: PS/2 mouse device common for all mice [ 1.822509] i2c /dev entries driver [ 1.827636] Driver for 1-wire Dallas network protocol. [ 1.833770] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported [ 1.841064] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported [ 1.848388] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported [ 1.858062] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.866485] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.876037] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.886047] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.893066] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.900482] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 1.910034] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 1.952514] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480ad000[0]' [ 1.962066] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 1.971862] 480ad000.mmc supply vmmc not found, using dummy regulator [ 1.979003] omap_hsmmc 480ad000.mmc: could not set regulator OCR (-22) [ 2.022918] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@1[0]' - status (0) [ 2.032409] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@1[0]' - status (0) [ 2.042602] ledtrig-cpu: registered to indicate activity on CPUs [ 2.049224] usbcore: registered new interface driver usbhid [ 2.055053] usbhid: USB HID core driver [ 2.060882] oprofile: using timer interrupt. [ 2.065704] TCP: cubic registered [ 2.069183] Initializing XFRM netlink socket [ 2.073883] NET: Registered protocol family 10 [ 2.076416] mmc0: BKOPS_EN bit is not set [ 2.078613] mmc0: new high speed MMC card at address 0001 [ 2.080017] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.082794] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.083099] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.107177] sit: IPv6 over IPv4 tunneling driver [ 2.108703] mmcblk0: unknown partition table [ 2.118011] NET: Registered protocol family 17 [ 2.122711] NET: Registered protocol family 15 [ 2.127532] Key type dns_resolver registered [ 2.132141] omap_vc_init_channel: No PMIC info for vdd_core [ 2.137969] omap_vp_init: No PMIC info for vdd_core [ 2.143096] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.148712] omap_vp_init: No PMIC info for vdd_mm [ 2.153656] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.159362] omap_vp_init: No PMIC info for vdd_mpu [ 2.165008] Power Management for TI OMAP4+ devices. [ 2.170318] ThumbEE CPU extension supported. [ 2.174926] Registering SWP/SWPB emulation handler [ 2.180084] SmartReflex Class3 initialized [ 2.190826] palmas 0-0048: Irq flag is 0x00000000 [ 2.201782] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.246765] smps123: 600 <--> 1500 mV at 1060 mV [ 2.254028] smps45: 600 <--> 1310 mV at 1030 mV [ 2.262176] smps6: 1200 mV [ 2.267211] smps7: 1800 mV [ 2.272369] smps8: 600 <--> 1310 mV at 1040 mV [ 2.279907] smps9: 2100 mV [ 2.284545] smps10_out2: 5000 mV [ 2.289520] smps10_out1: 5000 mV [ 2.294067] ldo1: 1500 <--> 1800 mV [ 2.300231] ldo2: 2800 mV [ 2.305572] ldo3: 1500 mV [ 2.309875] ldo4: 1500 <--> 1800 mV [ 2.316009] ldo5: 1800 mV [ 2.322662] ldo6: 1200 mV [ 2.327850] ldo7: 2000 mV [ 2.333068] ldo8: 3000 mV [ 2.338226] ldo9: 1800 <--> 3000 mV at 900 mV [ 2.345275] ldoln: 1800 mV [ 2.350555] ldousb: 3250 mV [ 2.354827] REGEN1: no parameters [ 2.358764] REGEN2: no parameters [ 2.363037] regen3: no parameters [ 2.367401] SYSEN1: no parameters [ 2.371368] SYSEN2: no parameters [ 2.376525] twl6040 0-004b: clk32k is not handled [ 2.383880] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.397705] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.405761] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.412017] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.421844] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.473846] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.480560] sr_init: No PMIC hook to init smartreflex [ 2.486236] sr_init: platform driver register failed for SR [ 2.522216] ldo8: disabling [ 2.526336] ldo3: disabling [ 2.532531] Waiting for root device /dev/mmcblk1p2... [ 2.540313] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.549041] mmc2: new SD card at address d91a [ 2.554534] mmcblk1: mmc2:d91a SU02G 1.84 GiB [ 2.561309] mmcblk1: p1 p2 [ 2.644470] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.656036] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.699279] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.708038] VFS: Mounted root (ext4 filesystem) readonly on device 179:26. [ 2.719085] devtmpfs: mounted [ 2.722717] Freeing unused kernel memory: 420K (c0867000 - c08d0000) /bin/sh: 0: can't access tty; job control turned off # # #