U-Boot 1.1.4 (Mar 18 2007 - 12:22:00)

OMAP2430C-GP revision 3, PRCM #5A
TI 2430SDP 1.1 Version + mDDR (Boot NOR)
DRAM:  128 MB
Flash: 192 MB
NAND:64 MB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  3  0 
OMAP243X SDP # 
OMAP243X SDP # setenv bootargs console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh
OMAP243X SDP # loady
## Ready for binary (ymodem) download to 0x80000000 at 115200 bps...
CSending: uImage-dtb.omap2430-sdp
Sending: 

Transfer complete
m - CRC mode, 4(SOH)/3621(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x003894db = 3708123 Bytes
OMAP243X SDP # bootm
## Booting image at 80000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3708059 Bytes =  3.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.5.0-rc1-196860-g0f514e6 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Mar 7 01:48:46 MST 2016
[    0.000000] CPU: ARMv6-compatible processor [4107b366] revision 6 (ARMv6TEJ), cr=00c5387d
[    0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI OMAP2430 SDP
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] cma: Reserved 16 MiB at 0x86800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 32256
[    0.000000] free_area_init_node: node 0, pgdat c0a04700, node_mem_map c7cd1000
[    0.000000]   Normal zone: 288 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32256 pages, LIFO batch:7
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP2430
[    0.000000] 
[    0.000000] PERCPU: Embedded 14 pages/cpu @c7c6d000 s24808 r8192 d24344 u57344
[    0.000000] pcpu-alloc: s24808 r8192 d24344 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 31968
[    0.000000] Kernel command line: console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 92352K/129024K available (6741K kernel code, 770K rwdata, 2280K rodata, 456K init, 8267K bss, 20288K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08d7718   (9022 kB)
[    0.000000]       .init : 0xc08d8000 - 0xc094a000   ( 456 kB)
[    0.000000]       .data : 0xc094a000 - 0xc0a0a874   ( 771 kB)
[    0.000000]        .bss : 0xc0a0d000 - 0xc121fe20   (8268 kB)
[    0.000000] Running RCU self tests
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU lockdep checking is enabled.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 3.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/DPLL/MPU): 13.0/532/266 MHz
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[    0.000061] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000823] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
[    0.004608] Console: colour dummy device 80x30
[    0.004791] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.004821] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.004852] ... MAX_LOCK_DEPTH:          48
[    0.004882] ... MAX_LOCKDEP_KEYS:        8191
[    0.004913] ... CLASSHASH_SIZE:          4096
[    0.004943] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.004974] ... MAX_LOCKDEP_CHAINS:      65536
[    0.005004] ... CHAINHASH_SIZE:          32768
[    0.005035]  memory used by lock dependency info: 5167 kB
[    0.005065]  per task-struct memory footprint: 1536 bytes
[    0.005126] Calibrating delay loop... 262.96 BogoMIPS (lpj=1314816)
[    0.071014] pid_max: default: 32768 minimum: 301
[    0.072540] Security Framework initialized
[    0.073028] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.073089] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.086669] CPU: Testing write buffer coherency: ok
[    0.093627] missing device node for CPU 0
[    0.093719] CPU0: thread -1, cpu 0, socket -1, mpidr 4107b366
[    0.093963] Setting up static identity map for 0x80008280 - 0x800082f0
[    0.108978] Brought up 1 CPUs
[    0.109039] SMP: Total of 1 processors activated (262.96 BogoMIPS).
[    0.109069] CPU: All CPU(s) started in SVC mode.
[    0.122589] devtmpfs: initialized
[    0.316802] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
[    0.319885] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.327331] pinctrl core: initialized pinctrl subsystem
[    0.347442] NET: Registered protocol family 16
[    0.371124] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.493621] omap_hwmod: usb_otg_hs: _wait_target_ready failed: -16
[    0.493682] omap_hwmod: usb_otg_hs: cannot be enabled for reset (3)
[    0.521545] cpuidle: using governor menu
[    0.598022] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio
[    0.602844] OMAP GPIO hardware version 2.4
[    0.607116] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio
[    0.614715] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio
[    0.622344] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio
[    0.630065] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio
[    0.636383] omap-gpmc 6e000000.gpmc: GPMC revision 3.0
[    0.636962] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    0.654083] No ATAGs?
[    0.654266] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.654327] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.657470] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[    0.657531] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[    0.660827] OMAP DMA hardware revision 4.0
[    0.783813] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.800170] SCSI subsystem initialized
[    0.802246] libata version 3.00 loaded.
[    0.811462] omap_i2c 48070000.i2c: bus 0 rev3.3 at 100 kHz
[    0.817474] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz
[    0.819000] pps_core: LinuxPPS API ver. 1 registered
[    0.819030] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.819244] PTP clock support registered
[    0.834564] clocksource: Switched to clocksource 32k_counter
[    1.267150] VFS: Disk quotas dquot_6.6.0
[    1.267700] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.400665] NET: Registered protocol family 2
[    1.408050] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    1.408233] TCP bind hash table entries: 1024 (order: 3, 36864 bytes)
[    1.409606] TCP: Hash tables configured (established 1024 bind 1024)
[    1.410278] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.411071] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.414947] NET: Registered protocol family 1
[    1.420684] RPC: Registered named UNIX socket transport module.
[    1.420776] RPC: Registered udp transport module.
[    1.420806] RPC: Registered tcp transport module.
[    1.420837] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.428314] hw perfevents: enabled with armv6_1136 PMU driver, 3 counters available
[    1.449066] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.449920] audit: initializing netlink subsys (disabled)
[    1.450622] audit: type=2000 audit(1.440:1): initialized
[    1.476623] NFS: Registering the id_resolver key type
[    1.478088] Key type id_resolver registered
[    1.478118] Key type id_legacy registered
[    1.478820] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.501342] io scheduler noop registered
[    1.501434] io scheduler deadline registered
[    1.501617] io scheduler cfq registered (default)
[    1.511718] pinctrl-single 49002030.pinmux: 340 pins at pa fb002030 size 340
[    1.525970] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.548889] omap_uart 4806a000.serial: no wakeirq for uart0
[    1.548950] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]'
[    1.550506] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    2.382568] console [ttyO0] enabled
[    2.392242] omap_uart 4806c000.serial: no wakeirq for uart1
[    2.398376] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]'
[    2.409393] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    2.423858] omap_uart 4806e000.serial: no wakeirq for uart2
[    2.429992] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]'
[    2.441070] 4806e000.serial: ttyO2 at MMIO 0x4806e000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    2.597747] brd: module loaded
[    2.685455] loop: module loaded
[    2.731048] twl 1-0048: PIH (irq 23) chaining IRQs 274..282
[    2.738464] twl 1-0048: power (irq 279) chaining IRQs 282..289
[    2.923828] twl4030_gpio twl4030-gpio: gpio (irq 274) chaining IRQs 290..307
[    2.933837] gpiochip_find_base: found new base at 494
[    2.940948] gpiochip_add_data: registered GPIOs 494 to 511 on device: twl4030
[    2.973571] mtdoops: mtd device (mtddev=name/number) must be supplied
[    3.011016] smc91x 8000300.ethernet: GPIO lookup for consumer power
[    3.017822] smc91x 8000300.ethernet: using device tree for GPIO lookup
[    3.024871] of_get_named_gpiod_flags: can't parse 'power-gpios' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]'
[    3.036376] of_get_named_gpiod_flags: can't parse 'power-gpio' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]'
[    3.047698] smc91x 8000300.ethernet: using lookup tables for GPIO lookup
[    3.055358] smc91x 8000300.ethernet: lookup for GPIO power failed
[    3.061828] smc91x 8000300.ethernet: GPIO lookup for consumer reset
[    3.068603] smc91x 8000300.ethernet: using device tree for GPIO lookup
[    3.075622] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]'
[    3.087066] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]'
[    3.098419] smc91x 8000300.ethernet: using lookup tables for GPIO lookup
[    3.105621] smc91x 8000300.ethernet: lookup for GPIO reset failed
[    3.112487] smc91x 8000300.ethernet (unnamed net_device) (uninitialized): smc91x: IOADDR c88fa300 doesn't match configuration (0).
[    3.125091] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>
[    3.140533] smc91x 8000300.ethernet eth0: SMC91C94 (rev 9) at c88fa300 IRQ 261
[    3.148376] 
[    3.149993] smc91x 8000300.ethernet eth0: Ethernet addr: 10:03:31:33:16:8f
[    3.174041] mousedev: PS/2 mouse device common for all mice
[    3.180236] i2c /dev entries driver
[    3.196380] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
[    3.202789] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[    3.209899] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]'
[    3.219696] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]'
[    3.229370] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
[    3.236602] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed
[    3.242797] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
[    3.249237] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[    3.256256] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]'
[    3.265991] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]'
[    3.275634] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
[    3.282745] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed
[    3.345794] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd
[    3.352172] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
[    3.359252] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]'
[    3.369049] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]'
[    3.378723] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
[    3.385955] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed
[    3.392150] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp
[    3.398590] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
[    3.405639] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]'
[    3.415374] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]'
[    3.425048] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
[    3.432159] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed
[    3.475921] ledtrig-cpu: registered to indicate activity on CPUs
[    3.486999] oprofile: using arm/armv6
[    3.493377] Initializing XFRM netlink socket
[    3.499664] NET: Registered protocol family 10
[    3.518005] sit: IPv6 over IPv4 tunneling driver
[    3.531158] NET: Registered protocol family 17
[    3.536346] NET: Registered protocol family 15
[    3.542480] Key type dns_resolver registered
[    3.547912] SmartReflex Class3 initialized
[    3.583343] hctosys: unable to open rtc device (rtc0)
[    3.589050] sr_init: No PMIC hook to init smartreflex
[    3.595397] sr_init: platform driver register failed for SR
[    3.736846] VUSB1V5: disabling
[    3.743469] VUSB1V8: disabling
[    3.749999] VUSB3V1: disabling
[    3.768127] Waiting for root device /dev/mmcblk0p1...