U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 5(SOH)/3635(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0038cd47 = 3722567 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3722503 Bytes = 3.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.5.0-rc1-196860-g0f514e6 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Mar 7 01:48:46 MST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c0a04700, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef696000 s24808 r8192 d24344 u57344 [ 0.000000] pcpu-alloc: s24808 r8192 d24344 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259904 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001120K/1046528K available (6741K kernel code, 770K rwdata, 2280K rodata, 456K init, 8267K bss, 29024K reserved, 16384K cma-reserved, 243712K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d7718 (9022 kB) [ 0.000000] .init : 0xc08d8000 - 0xc094a000 ( 456 kB) [ 0.000000] .data : 0xc094a000 - 0xc0a0a874 ( 771 kB) [ 0.000000] .bss : 0xc0a0d000 - 0xc121fe20 (8268 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001495] Console: colour dummy device 80x30 [ 0.001525] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001556] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001556] ... MAX_LOCK_DEPTH: 48 [ 0.001556] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001556] ... CLASSHASH_SIZE: 4096 [ 0.001586] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001586] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001586] ... CHAINHASH_SIZE: 32768 [ 0.001617] memory used by lock dependency info: 5167 kB [ 0.001617] per task-struct memory footprint: 1536 bytes [ 0.001647] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.079345] pid_max: default: 32768 minimum: 301 [ 0.079803] Security Framework initialized [ 0.079956] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079986] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083557] CPU: Testing write buffer coherency: ok [ 0.085174] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.085266] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.179290] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.179931] Brought up 2 CPUs [ 0.179962] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.179962] CPU: All CPU(s) started in SVC mode. [ 0.183105] devtmpfs: initialized [ 0.239471] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.240356] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.242675] pinctrl core: initialized pinctrl subsystem [ 0.247558] NET: Registered protocol family 16 [ 0.252960] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.257690] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.262207] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.469451] cpuidle: using governor menu [ 0.483306] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio [ 0.484558] OMAP GPIO hardware version 0.1 [ 0.485809] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio [ 0.488037] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio [ 0.490173] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio [ 0.492309] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio [ 0.494384] gpiochip_add_data: registered GPIOs 160 to 191 on device: gpio [ 0.515533] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.516052] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.523956] No ATAGs? [ 0.524047] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.524078] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.526397] OMAP DMA hardware revision 0.0 [ 0.584350] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.585876] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.586730] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.591278] SCSI subsystem initialized [ 0.591827] libata version 3.00 loaded. [ 0.592498] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.593048] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.593139] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.593231] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.593597] pps_core: LinuxPPS API ver. 1 registered [ 0.593597] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.593658] PTP clock support registered [ 0.597534] clocksource: Switched to clocksource 32k_counter [ 0.707031] VFS: Disk quotas dquot_6.6.0 [ 0.707214] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.739959] NET: Registered protocol family 2 [ 0.741973] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.742187] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.744720] TCP: Hash tables configured (established 8192 bind 8192) [ 0.744964] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.745330] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.746429] NET: Registered protocol family 1 [ 0.747955] RPC: Registered named UNIX socket transport module. [ 0.747955] RPC: Registered udp transport module. [ 0.747985] RPC: Registered tcp transport module. [ 0.747985] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.753326] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.758728] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.759063] audit: initializing netlink subsys (disabled) [ 0.759277] audit: type=2000 audit(0.740:1): initialized [ 0.766082] NFS: Registering the id_resolver key type [ 0.766448] Key type id_resolver registered [ 0.766479] Key type id_legacy registered [ 0.766662] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.771820] bounce: pool size: 64 pages [ 0.771942] io scheduler noop registered [ 0.771972] io scheduler deadline registered [ 0.772003] io scheduler cfq registered (default) [ 0.775482] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.776245] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.782958] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.788848] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.788879] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.789337] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.791046] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.791046] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.791320] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.792449] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.792480] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.792724] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.771850] console [ttyO2] enabled [ 1.808654] brd: module loaded [ 1.832244] loop: module loaded [ 1.838562] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.852233] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.862701] spi1.0 supply vdd-io not found, using dummy regulator [ 1.869537] spi1.0 supply vdd not found, using dummy regulator [ 1.875793] ks8851 spi1.0: message enable is 0 [ 1.886322] ks8851 spi1.0 eth0: revision 1, MAC c2:70:52:0d:68:76, IRQ 202, no EEPROM [ 1.899291] mousedev: PS/2 mouse device common for all mice [ 1.905151] i2c /dev entries driver [ 1.910308] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.916625] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.923492] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.933074] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.942596] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.949737] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 1.955871] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.962188] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.969055] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.978668] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.988159] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.995178] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.039184] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.045471] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.052368] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.061950] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.071472] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.078491] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.108001] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.114318] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.121215] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.131622] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.136444] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.142761] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.149627] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.159240] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.168731] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.175750] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.218414] ledtrig-cpu: registered to indicate activity on CPUs [ 2.225952] oprofile: using arm/armv7-ca9 [ 2.230957] Initializing XFRM netlink socket [ 2.235839] NET: Registered protocol family 10 [ 2.243896] sit: IPv6 over IPv4 tunneling driver [ 2.250946] NET: Registered protocol family 17 [ 2.255676] NET: Registered protocol family 15 [ 2.260711] Key type dns_resolver registered [ 2.265502] twl: not initialized [ 2.268920] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.277313] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.285736] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.294158] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.302581] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.310974] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.319396] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.327850] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.335052] omap2_set_init_voltage: unable to set vdd_mpu [ 2.340728] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.348052] omap2_set_init_voltage: unable to set vdd_core [ 2.353820] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.361053] omap2_set_init_voltage: unable to set vdd_iva [ 2.368865] Power Management for TI OMAP4+ devices. [ 2.373962] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.381317] ThumbEE CPU extension supported. [ 2.386901] Registering SWP/SWPB emulation handler [ 2.391937] SmartReflex Class3 initialized [ 2.401977] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.413330] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.420257] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.427429] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.437530] no flags found for reset [ 2.441314] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.448699] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.455841] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.465667] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.475463] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.482818] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.493347] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.517700] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.525573] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.532653] twl 0-0048: PIH (irq 327) nested IRQs [ 2.557373] VUSIM: failed to get the current voltage(-22) [ 2.563598] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.574310] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.592895] twl6040 0-004b: clk32k is not handled [ 2.604675] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.618713] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.628509] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.636108] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.642669] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.642669] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.656097] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.665710] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.675201] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.682250] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.688385] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.694732] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.701599] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.711181] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.720703] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.727752] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.734191] omap_hsmmc 4809c000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.745574] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.756072] mmc0: new high speed SDHC card at address b368 [ 2.764495] mmcblk0: mmc0:b368 USD 3.76 GiB [ 2.772552] mmcblk0: p1 p2 [ 2.787933] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.787933] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.802001] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.807464] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.821075] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.828094] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.834533] omap_hsmmc 480d1000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.885375] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.896057] mmc1: new high speed SDHC card at address 0007 [ 2.903442] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.910675] mmcblk1: p1 p2 [ 2.959320] hctosys: unable to open rtc device (rtc0) [ 2.959320] sr_init: No PMIC hook to init smartreflex [ 2.970794] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.979553] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.988250] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.041656] VAUX1_6030: disabling [ 3.044006] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.056701] VDAC: disabling [ 3.060546] VANA: disabling [ 3.061492] mmc2: new SDIO card at address 0001 [ 3.069122] VUSB: disabling [ 3.078521] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.111938] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.121795] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 7.027465] EXT4-fs (mmcblk1p2): recovery complete [ 7.040954] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.049713] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.061828] devtmpfs: mounted [ 7.063323] Freeing unused kernel memory: 456K (c08d8000 - c094a000) [ 7.371429] random: init urandom read with 31 bits of entropy available [ 7.390533] init: Failed to create pty - disabling logging for job [ 7.400360] init: Temporary process spawn error: No space left on device [ 7.451232] init: Failed to create pty - disabling logging for job [ 7.458404] init: Temporary process spawn error: No space left on device [ 7.477966] init: Failed to create pty - disabling logging for job [ 7.485046] init: Temporary process spawn error: No space left on device [ 7.495697] init: Failed to create pty - disabling logging for job [ 7.503845] init: Temporary process spawn error: No space left on device [ 7.587402] init: hwclock main process (85) terminated with status 1 [ 7.639434] init: ureadahead main process (86) terminated with status 5 [ 7.836151] init: Failed to create pty - disabling logging for job [ 7.842864] init: Temporary process spawn error: No space left on device [ 7.882568] init: Failed to create pty - disabling logging for job [ 7.889312] init: Temporary process spawn error: No space left on device [ 7.979980] init: Failed to create pty - disabling logging for job [ 7.980163] init: Temporary process spawn error: No space left on device [ 8.476654] udevd[141]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177463/963584 files, 2993922/7708672 blocks [ 11.769683] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 12.101562] init: udev-fallback-graphics main process (442) terminated with status 1 [ 12.194122] random: nonblocking pool is initialized [ 12.312835] init: plymouth-splash main process (458) terminated with status 2 [ 12.331085] init: plymouth main process (87) killed by SEGV signal mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.633453] init: plymouth-log main process (493) terminated with status 1 [ 12.664245] init: failsafe main process (496) killed by TERM signal [ 13.617492] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 13.695465] init: plymouth-upstart-bridge main process (535) terminated with status 1 [ 13.788208] init: bluetooth main process (545) terminated with status 1 [ 13.795593] init: bluetooth main process ended, respawning speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.539062] init: alsa-restore main process (595) terminated with status 19 [ 14.559387] init: hybrid-gfx main process (612) terminated with status 1 FATAL: Could not load /lib/modules/4.5.0-rc1-196860-g0f514e6/modules.dep: No such file or directory [ 15.100128] init: bluetooth main process (650) terminated with status 1 [ 15.132476] init: bluetooth main process ended, respawning [ 15.430999] init: bluetooth main process (705) terminated with status 1 [ 15.439178] init: bluetooth main process ended, respawning [ 15.628051] init: bluetooth main process (722) terminated with status 1 [ 15.628051] init: bluetooth main process ended, respawning [ 15.884033] init: bluetooth main process (738) terminated with status 1 [ 15.906463] init: bluetooth main process ended, respawning [ 16.238800] init: bluetooth main process (756) terminated with status 1 [ 16.246368] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 16.781219] init: bluetooth main process (787) terminated with status 1 [ 16.789367] init: bluetooth main process ended, respawning [ 17.028320] init: bluetooth main process (806) terminated with status 1 [ 17.036041] init: bluetooth main process ended, respawning