U-Boot SPL 2014.07-gfb6ab76 (Jul 06 2015 - 16:10:49) Error: NAND flash not present on this board SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img U-Boot 2014.07-gfb6ab76 (Jul 06 2015 - 16:10:49) I2C: ready DRAM: 1 GiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment Net: not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 1  0 U-Boot# U-Boot# setenv autoload 0 U-Boot# U-Boot# setenv serverip 192.168.57.1 U-Boot# U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete..... done link up on port 0, speed 1000, full duplex BOOTP broadcast 1 cpsw Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.57.180 U-Boot# tftpboot 0x82000000 zImage.omap2plus_defconfig link up on port 0, speed 1000, full duplex Using cpsw device TFTP from server 192.168.57.1; our IP address is 192.168.57.180 Filename 'zImage.omap2plus_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ####################################################### 3.1 MiB/s done Bytes transferred = 3665656 (37eef8 hex) U-Boot# tftpboot 0x88000000 am437x-sk-evm.dtb link up on port 0, speed 1000, full duplex Using cpsw device TFTP from server 192.168.57.1; our IP address is 192.168.57.180 Filename 'am437x-sk-evm.dtb'. Load address: 0x88000000 Loading: *### 3.2 MiB/s done Bytes transferred = 43038 (a81e hex) U-Boot# setenv bootargs console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 init=/bin/sh U-Boot# U-Boot# bootz 0x82000000 - 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x37eef8 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff2000, end 8ffff81d ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.5.0-rc1-196860-g0f514e6 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Mar 7 01:48:46 MST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM437x SK EVM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c0a04700, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM437x ES1.2 (sgx neon ) [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef6b5000 s24808 r8192 d24344 u57344 [ 0.000000] pcpu-alloc: s24808 r8192 d24344 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1003312K/1048576K available (6741K kernel code, 770K rwdata, 2280K rodata, 456K init, 8267K bss, 28880K reserved, 16384K cma-reserved, 245760K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d7718 (9022 kB) [ 0.000000] .init : 0xc08d8000 - 0xc094a000 ( 456 kB) [ 0.000000] .data : 0xc094a000 - 0xc0a0a874 ( 771 kB) [ 0.000000] .bss : 0xc0a0d000 - 0xc121fe20 (8268 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e030000 -> 0x3e430000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e030000 -> 0x3e430000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x4e430000 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001037] Console: colour dummy device 80x30 [ 0.001098] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001098] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001098] ... MAX_LOCK_DEPTH: 48 [ 0.001129] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001129] ... CLASSHASH_SIZE: 4096 [ 0.001129] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001129] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001129] ... CHAINHASH_SIZE: 32768 [ 0.001159] memory used by lock dependency info: 5167 kB [ 0.001159] per task-struct memory footprint: 1536 bytes [ 0.001190] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896) [ 0.119567] pid_max: default: 32768 minimum: 301 [ 0.119934] Security Framework initialized [ 0.120025] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.120056] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.123077] CPU: Testing write buffer coherency: ok [ 0.124603] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.124725] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.127990] Brought up 1 CPUs [ 0.127990] SMP: Total of 1 processors activated (1987.37 BogoMIPS). [ 0.128021] CPU: All CPU(s) started in SVC mode. [ 0.130950] devtmpfs: initialized [ 0.160736] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.161529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.163818] pinctrl core: initialized pinctrl subsystem [ 0.168121] NET: Registered protocol family 16 [ 0.172607] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.283996] cpuidle: using governor menu [ 0.287689] omap_l3_noc 44000000.ocp: L3 debug error: target 8 mod:0 (unclearable) [ 0.287872] omap_l3_noc 44000000.ocp: L3 application error: target 8 mod:0 (unclearable) [ 0.295349] platform 44e3e000.rtc: Cannot lookup hwmod 'rtc' [ 0.297119] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio [ 0.298187] OMAP GPIO hardware version 0.1 [ 0.299316] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio [ 0.301269] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio [ 0.306182] platform 53701000.des: Cannot lookup hwmod 'des' [ 0.313903] No ATAGs? [ 0.313995] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.314025] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.314514] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.314514] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.348419] edma 49000000.edma: TI EDMA DMA engine driver [ 0.351867] SCSI subsystem initialized [ 0.352630] libata version 3.00 loaded. [ 0.353698] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/i2c0_pins, deferring probe [ 0.353790] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/i2c1_pins, deferring probe [ 0.354003] pps_core: LinuxPPS API ver. 1 registered [ 0.354034] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.354064] PTP clock support registered [ 0.357391] clocksource: Switched to clocksource 32k_counter [ 0.443298] VFS: Disk quotas dquot_6.6.0 [ 0.443450] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.468078] NET: Registered protocol family 2 [ 0.469787] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.469940] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.471771] TCP: Hash tables configured (established 8192 bind 8192) [ 0.472198] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.472473] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.473419] NET: Registered protocol family 1 [ 0.475067] RPC: Registered named UNIX socket transport module. [ 0.475097] RPC: Registered udp transport module. [ 0.475097] RPC: Registered tcp transport module. [ 0.475128] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.480712] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.480926] audit: initializing netlink subsys (disabled) [ 0.481170] audit: type=2000 audit(0.460:1): initialized [ 0.486877] NFS: Registering the id_resolver key type [ 0.487213] Key type id_resolver registered [ 0.487213] Key type id_legacy registered [ 0.487579] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.492309] bounce: pool size: 64 pages [ 0.492462] io scheduler noop registered [ 0.492492] io scheduler deadline registered [ 0.492553] io scheduler cfq registered (default) [ 0.495819] pinctrl-single 44e10800.pinmux: 199 pins at pa f9e10800 size 796 [ 0.499542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.504333] omap_uart 44e09000.serial: no wakeirq for uart0 [ 0.504364] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@44e09000[0]' [ 0.504364] omap_uart 44e09000.serial: No clock speed specified: using default: 48000000 [ 0.504882] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 29, base_baud = 3000000) is a OMAP UART0 [ 1.348236] console [ttyO0] enabled [ 1.383605] brd: module loaded [ 1.405700] loop: module loaded [ 1.411499] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.487396] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.493835] davinci_mdio 4a101000.mdio: detected phy mask ffffffcf [ 1.504638] libphy: 4a101000.mdio: probed [ 1.508972] davinci_mdio 4a101000.mdio: phy[4]: device 4a101000.mdio:04, driver unknown [ 1.517425] davinci_mdio 4a101000.mdio: phy[5]: device 4a101000.mdio:05, driver unknown [ 1.526947] cpsw 4a100000.ethernet: Detected MACID = 34:b1:f7:3d:be:6a [ 1.536102] cpsw 4a100000.ethernet: cpsw: Detected MACID = 34:b1:f7:3d:be:6c [ 1.547027] mousedev: PS/2 mouse device common for all mice [ 1.553039] i2c /dev entries driver [ 1.558288] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 1.564636] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.571624] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) [ 1.582061] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.586944] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 1.593261] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.600158] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 1.609771] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 1.619293] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 1.626342] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 1.635192] ledtrig-cpu: registered to indicate activity on CPUs [ 1.642608] oprofile: no performance counters [ 1.648406] oprofile: using timer interrupt. [ 1.653594] Initializing XFRM netlink socket [ 1.658538] NET: Registered protocol family 10 [ 1.666412] sit: IPv6 over IPv4 tunneling driver [ 1.673492] NET: Registered protocol family 17 [ 1.678314] NET: Registered protocol family 15 [ 1.683319] Key type dns_resolver registered [ 1.688140] omap_voltage_late_init: Voltage driver support not added [ 1.694824] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 1.703399] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 1.712921] ThumbEE CPU extension supported. [ 1.717529] Registering SWP/SWPB emulation handler [ 1.722595] SmartReflex Class3 initialized [ 1.764038] omap_i2c 44e0b000.i2c: bus 0 rev0.12 at 400 kHz [ 1.773651] omap_i2c 4802a000.i2c: bus 1 rev0.12 at 400 kHz [ 1.780395] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 1.786743] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.793731] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) [ 1.804199] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.809082] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 1.815399] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.822296] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 1.831909] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 1.841430] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 1.848480] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 1.854888] omap_hsmmc 48060000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 1.900268] hctosys: unable to open rtc device (rtc0) [ 1.905609] sr_init: No PMIC hook to init smartreflex [ 1.911224] sr_init: platform driver register failed for SR [ 1.939117] Waiting for root device /dev/mmcblk0p2... [ 2.017395] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.029296] mmc0: new high speed SDHC card at address aaaa [ 2.037689] mmcblk0: mmc0:aaaa SS08G 7.40 GiB [ 2.046203] mmcblk0: p1 p2 [ 2.183349] EXT4-fs (mmcblk0p2): recovery complete [ 2.189086] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.197814] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.209899] devtmpfs: mounted [ 2.214019] Freeing unused kernel memory: 456K (c08d8000 - c094a000) sh-3.2# sh-3.2# sh-3.2#