Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################## done Bytes transferred = 4781791 (48f6df hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4781727 Bytes = 4.6 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-rc1-00005-g1c7e36b (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Jan 21 14:28:57 MST 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c096ecc0, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 11 pages/cpu @cfc41000 s14912 r8192 d21952 u45056 [ 0.000000] pcpu-alloc: s14912 r8192 d21952 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223784K/261120K available (6190K kernel code, 674K rwdata, 2356K rodata, 428K init, 8221K bss, 20952K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0860d40 (8548 kB) [ 0.000000] .init : 0xc0861000 - 0xc08cc000 ( 428 kB) [ 0.000000] .data : 0xc08cc000 - 0xc0974ae8 ( 675 kB) [ 0.000000] .bss : 0xc0974ae8 - 0xc117c250 (8222 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000035] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns [ 0.000144] OMAP clocksource: timer1 at 13000000 Hz [ 0.001513] Console: colour dummy device 80x30 [ 0.001603] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001621] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001636] ... MAX_LOCK_DEPTH: 48 [ 0.001651] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001665] ... CLASSHASH_SIZE: 4096 [ 0.001679] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001693] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001707] ... CHAINHASH_SIZE: 32768 [ 0.001721] memory used by lock dependency info: 5167 kB [ 0.001736] per task-struct memory footprint: 1152 bytes [ 0.001779] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.095967] pid_max: default: 32768 minimum: 301 [ 0.096591] Security Framework initialized [ 0.096876] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096906] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101839] Initializing cgroup subsys memory [ 0.101970] Initializing cgroup subsys devices [ 0.102117] Initializing cgroup subsys freezer [ 0.102253] Initializing cgroup subsys blkio [ 0.102387] Initializing cgroup subsys perf_event [ 0.102523] CPU: Testing write buffer coherency: ok [ 0.104626] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.104838] Setting up static identity map for 0x805dd8d0 - 0x805dd940 [ 0.110737] Brought up 1 CPUs [ 0.110770] CPU: All CPU(s) started in SVC mode. [ 0.115626] devtmpfs: initialized [ 0.119904] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.198010] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.200260] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.281342] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.281378] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.300315] pinctrl core: initialized pinctrl subsystem [ 0.405825] NET: Registered protocol family 16 [ 0.416199] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.419839] cpuidle: using governor ladder [ 0.419894] cpuidle: using governor menu [ 0.430344] Reprogramming SDRC clock to 332000000 Hz [ 0.434733] In-band Error seen by USB_OTG at address 0 [ 0.434762] ------------[ cut here ]------------ [ 0.434809] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.434826] Modules linked in: [ 0.434864] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc1-00005-g1c7e36b #1 [ 0.434883] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.434946] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.434991] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.435026] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.435055] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.435084] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.435122] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x60/0x1f4) [ 0.435153] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.435187] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.435218] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.435247] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.435276] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.435306] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.435326] Exception stack(0xce095cc8 to 0xce095d10) [ 0.435353] 5cc0: 00000001 ce0930c8 00000000 ce092b40 60000153 ce02e260 [ 0.435379] 5ce0: ce02e260 00000000 00000014 60000153 ce02e238 00000000 00000000 ce095d10 [ 0.435400] 5d00: c0083850 c05db5f4 20000153 ffffffff [ 0.435439] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.435471] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.435502] [] (__setup_irq) from [] (request_threaded_irq+0xa8/0x134) [ 0.435532] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.435570] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.435604] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 0.435635] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.435664] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.435693] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.435721] [] (bus_probe_device) from [] (device_add+0x2ec/0x4e8) [ 0.435764] [] (device_add) from [] (of_platform_device_create_pdata+0xec/0x148) [ 0.435796] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.435827] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.435868] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.435900] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.435932] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.435962] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.435991] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.436021] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.436051] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.436219] ---[ end trace 2dc98d1f87a99ca3 ]--- [ 0.437545] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.448477] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.449895] OMAP GPIO hardware version 2.5 [ 0.452089] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.455545] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.458953] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.462123] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.465247] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.482903] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.483861] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.496691] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.499788] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.660650] No ATAGs? [ 0.660704] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.664965] OMAP DMA hardware revision 4.0 [ 0.770403] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.771935] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.773440] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.774672] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.775870] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.777403] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.777471] platform wl12xx_vmmc2: Driver reg-fixed-voltage requests probe deferral [ 0.777725] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.778938] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/pinmux@48002030/pinmux_sb_t35_audio_amp, deferring probe [ 0.778996] platform audio_amp: Driver reg-fixed-voltage requests probe deferral [ 0.779233] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.780548] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.788132] SCSI subsystem initialized [ 0.789351] libata version 3.00 loaded. [ 0.790743] usbcore: registered new interface driver usbfs [ 0.791064] usbcore: registered new interface driver hub [ 0.791326] usbcore: registered new device driver usb [ 0.792021] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.792089] platform hsusb1_phy: Driver usb_phy_generic requests probe deferral [ 0.792233] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.792286] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral [ 0.793526] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c1_pins, deferring probe [ 0.793583] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.796397] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.796846] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c3_pins, deferring probe [ 0.796912] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.804390] Switched to clocksource timer1 [ 1.052417] NET: Registered protocol family 2 [ 1.055337] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.055596] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.056741] TCP: Hash tables configured (established 2048 bind 2048) [ 1.057083] TCP: reno registered [ 1.057131] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.057454] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.059243] NET: Registered protocol family 1 [ 1.061735] RPC: Registered named UNIX socket transport module. [ 1.061773] RPC: Registered udp transport module. [ 1.061793] RPC: Registered tcp transport module. [ 1.061811] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.064379] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.073820] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.074455] audit: initializing netlink subsys (disabled) [ 1.074866] audit: type=2000 audit(1.070:1): initialized [ 1.082254] VFS: Disk quotas dquot_6.5.2 [ 1.082539] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.086587] NFS: Registering the id_resolver key type [ 1.087183] Key type id_resolver registered [ 1.087208] Key type id_legacy registered [ 1.087498] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.095300] io scheduler noop registered [ 1.095361] io scheduler deadline registered [ 1.095539] io scheduler cfq registered (default) [ 1.101005] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.101907] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.112382] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.123083] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.123140] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.124590] omap_uart 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 225, base_baud = 3000000) is a OMAP UART0 [ 1.127702] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.127757] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.128218] omap_uart 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 226, base_baud = 3000000) is a OMAP UART1 [ 1.130451] omap_uart 49020000.serial: no wakeirq for uart0 [ 1.130501] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.130940] omap_uart 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 227, base_baud = 3000000) is a OMAP UART2 [ 2.546752] console [ttyO2] enabled [ 2.591778] brd: module loaded [ 2.618016] loop: module loaded [ 2.627489] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.661347] libphy: smsc911x-mdio: probed [ 2.666378] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 2.679880] smsc911x 2d000000.ethernet eth0: MAC Address: 6e:b8:7a:fc:34:08 [ 2.734090] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 2.740580] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 2.751056] libphy: davinci_mdio.0: probed [ 2.755540] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 2.764166] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 2.774350] usbcore: registered new interface driver asix [ 2.780281] usbcore: registered new interface driver ax88179_178a [ 2.786954] usbcore: registered new interface driver cdc_ether [ 2.793368] usbcore: registered new interface driver smsc95xx [ 2.799661] usbcore: registered new interface driver net1080 [ 2.805855] usbcore: registered new interface driver cdc_subset [ 2.812261] usbcore: registered new interface driver zaurus [ 2.818531] usbcore: registered new interface driver cdc_ncm [ 2.826465] usbcore: registered new interface driver cdc_wdm [ 2.832720] usbcore: registered new interface driver usb-storage [ 2.839545] usbcore: registered new interface driver usbtest [ 2.849482] mousedev: PS/2 mouse device common for all mice [ 2.860430] i2c /dev entries driver [ 2.866684] Driver for 1-wire Dallas network protocol. [ 2.877267] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 2.886210] Driver 'mmcblk' needs updating - please use bus_type methods [ 2.895433] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.905885] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.954879] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.964585] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.975217] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 2.982937] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 2.992010] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/ledb[0]' - status (0) [ 3.003610] ledtrig-cpu: registered to indicate activity on CPUs [ 3.011046] usbcore: registered new interface driver usbhid [ 3.016976] usbhid: USB HID core driver [ 3.023735] oprofile: using arm/armv7 [ 3.028858] TCP: cubic registered [ 3.032408] Initializing XFRM netlink socket [ 3.037223] NET: Registered protocol family 17 [ 3.042020] NET: Registered protocol family 15 [ 3.047349] Key type dns_resolver registered [ 3.052255] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.059927] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.066049] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.073340] omap2_set_init_voltage: unable to set vdd_core [ 3.080939] PM: no software I/O chain control; some wakeups may be lost [ 3.087997] pm: Failed to request pm_wkup irq [ 3.092634] ThumbEE CPU extension supported. [ 3.097225] Registering SWP/SWPB emulation handler [ 3.102266] SmartReflex Class3 initialized [ 3.121327] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.133760] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.145272] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.157201] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.176667] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.188611] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.195720] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.205411] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.305352] mmc0: new high speed SDHC card at address b368 [ 3.318220] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.324967] sr_init: No PMIC hook to init smartreflex [ 3.330723] sr_init: platform driver register failed for SR [ 3.421915] ads7846-reg: disabling [ 3.425651] hsusb2_vbus: disabling [ 3.429224] hsusb1_vbus: disabling [ 3.435627] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 3.450459] mmcblk0: p1 p2 [ 3.482841] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 3.496286] devtmpfs: mounted [ 3.500854] Freeing unused kernel memory: 428K (c0861000 - c08cc000) /bin/sh: can't access tty; job control turned off # # #