U-Boot 1.1.4 (Mar 18 2007 - 12:22:00) OMAP2430C-GP revision 3, PRCM #5A TI 2430SDP 1.1 Version + mDDR (Boot NOR) DRAM: 128 MB Flash: 192 MB NAND:64 MB In: serial Out: serial Err: serial Hit any key to stop autoboot: 3  0 OMAP243X SDP # OMAP243X SDP # setenv bootargs console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh OMAP243X SDP # loady ## Ready for binary (ymodem) download to 0x80000000 at 115200 bps... CSending: uImage-dtb.omap2430-sdp Sending: Transfer complete em - CRC mode, 6(SOH)/4420(STX)/0(CAN) packets, 3 retries ## Total Size = 0x004511f1 = 4526577 Bytes OMAP243X SDP # bootm ## Booting image at 80000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4526513 Bytes = 4.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-rc1-129035-gedec178 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Mar 24 18:58:12 MDT 2015 [ 0.000000] CPU: ARMv6-compatible processor [4107b366] revision 6 (ARMv6TEJ), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI OMAP2430 SDP [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x86800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32512 [ 0.000000] free_area_init_node: node 0, pgdat c08f6100, node_mem_map c7dd1000 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] OMAP2430 [ 0.000000] [ 0.000000] PERCPU: Embedded 12 pages/cpu @c7d70000 s18496 r8192 d22464 u49152 [ 0.000000] pcpu-alloc: s18496 r8192 d22464 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32224 [ 0.000000] Kernel command line: console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 94528K/130048K available (5884K kernel code, 591K rwdata, 2260K rodata, 428K init, 8219K bss, 19136K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07fc4a4 (8146 kB) [ 0.000000] .init : 0xc07fd000 - 0xc0868000 ( 428 kB) [ 0.000000] .data : 0xc0868000 - 0xc08fbfa8 ( 592 kB) [ 0.000000] .bss : 0xc08fbfa8 - 0xc1102cd0 (8220 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 3.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 13.0/532/266 MHz [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000061] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000579] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present. [ 0.003112] Console: colour dummy device 80x30 [ 0.003295] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003326] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003356] ... MAX_LOCK_DEPTH: 48 [ 0.003387] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003417] ... CLASSHASH_SIZE: 4096 [ 0.003448] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003479] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003509] ... CHAINHASH_SIZE: 32768 [ 0.003540] memory used by lock dependency info: 5167 kB [ 0.003570] per task-struct memory footprint: 1152 bytes [ 0.003631] Calibrating delay loop... 262.96 BogoMIPS (lpj=1314816) [ 0.115020] pid_max: default: 32768 minimum: 301 [ 0.116210] Security Framework initialized [ 0.116790] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.116851] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.128234] Initializing cgroup subsys blkio [ 0.128356] Initializing cgroup subsys memory [ 0.128631] Initializing cgroup subsys devices [ 0.128936] Initializing cgroup subsys freezer [ 0.129455] Initializing cgroup subsys perf_event [ 0.129699] CPU: Testing write buffer coherency: ok [ 0.134674] missing device node for CPU 0 [ 0.134735] CPU0: thread -1, cpu 0, socket -1, mpidr 4107b366 [ 0.135223] Setting up static identity map for 0x80593388 - 0x805933f8 [ 0.148773] Brought up 1 CPUs [ 0.148834] SMP: Total of 1 processors activated (262.96 BogoMIPS). [ 0.148864] CPU: All CPU(s) started in SVC mode. [ 0.161437] devtmpfs: initialized [ 0.189422] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2 [ 0.305358] omap_hwmod: usb_otg_hs: _wait_target_ready failed: -16 [ 0.305419] omap_hwmod: usb_otg_hs: cannot be enabled for reset (3) [ 0.333801] pinctrl core: initialized pinctrl subsystem [ 0.507934] NET: Registered protocol family 16 [ 0.534912] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.541870] cpuidle: using governor ladder [ 0.541961] cpuidle: using governor menu [ 0.610412] omap_gpio 4900c000.gpio: Could not get gpio dbck [ 0.614410] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.618011] OMAP GPIO hardware version 2.4 [ 0.620697] omap_gpio 4900e000.gpio: Could not get gpio dbck [ 0.621887] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.627441] omap_gpio 49010000.gpio: Could not get gpio dbck [ 0.628753] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.634246] omap_gpio 49012000.gpio: Could not get gpio dbck [ 0.635498] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.640777] omap_gpio 480b6000.gpio: Could not get gpio dbck [ 0.641998] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.648040] omap-gpmc 6e000000.gpmc: GPMC revision 3.0 [ 0.664337] No ATAGs? [ 0.664550] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.664581] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.671295] OMAP DMA hardware revision 4.0 [ 0.869903] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.883666] SCSI subsystem initialized [ 0.885620] libata version 3.00 loaded. [ 0.892974] omap_i2c 48070000.i2c: bus 0 rev3.3 at 100 kHz [ 0.898284] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.914794] Switched to clocksource 32k_counter [ 1.423522] NET: Registered protocol family 2 [ 1.430206] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 1.430755] TCP bind hash table entries: 1024 (order: 3, 36864 bytes) [ 1.432159] TCP: Hash tables configured (established 1024 bind 1024) [ 1.432800] TCP: reno registered [ 1.432891] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.433929] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.437438] NET: Registered protocol family 1 [ 1.443450] RPC: Registered named UNIX socket transport module. [ 1.443511] RPC: Registered udp transport module. [ 1.443572] RPC: Registered tcp transport module. [ 1.443786] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.449371] hw perfevents: enabled with armv6_1136 PMU driver, 3 counters available [ 1.468414] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.469299] audit: initializing netlink subsys (disabled) [ 1.470123] audit: type=2000 audit(1.460:1): initialized [ 1.485656] VFS: Disk quotas dquot_6.5.2 [ 1.486145] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.494934] NFS: Registering the id_resolver key type [ 1.496368] Key type id_resolver registered [ 1.496429] Key type id_legacy registered [ 1.497100] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.515350] io scheduler noop registered [ 1.515441] io scheduler deadline registered [ 1.515624] io scheduler cfq registered (default) [ 1.522644] pinctrl-single 49002030.pinmux: 340 pins at pa fb002030 size 340 [ 1.536773] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.559082] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.559173] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.560821] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 2.387268] console [ttyO0] enabled [ 2.398284] omap_uart 4806c000.serial: no wakeirq for uart0 [ 2.404510] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 2.415496] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 2.429779] omap_uart 4806e000.serial: no wakeirq for uart0 [ 2.435913] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 2.446838] 4806e000.serial: ttyO2 at MMIO 0x4806e000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.563201] brd: module loaded [ 2.630920] loop: module loaded [ 2.675018] twl 1-0048: PIH (irq 23) chaining IRQs 274..282 [ 2.682098] twl 1-0048: power (irq 279) chaining IRQs 282..289 [ 2.849670] twl4030_gpio twl4030-gpio: gpio (irq 274) chaining IRQs 290..307 [ 2.859558] gpiochip_find_base: found new base at 494 [ 2.866943] gpiochip_add: registered GPIOs 494 to 511 on device: twl4030 [ 2.896057] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.924346] smc91x 8000300.ethernet: GPIO lookup for consumer power [ 2.930999] smc91x 8000300.ethernet: using device tree for GPIO lookup [ 2.938049] of_get_named_gpiod_flags: can't parse 'power-gpios' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 2.949462] of_get_named_gpiod_flags: can't parse 'power-gpio' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 2.960784] smc91x 8000300.ethernet: using lookup tables for GPIO lookup [ 2.968383] smc91x 8000300.ethernet: lookup for GPIO power failed [ 2.975006] smc91x 8000300.ethernet: GPIO lookup for consumer reset [ 2.981658] smc91x 8000300.ethernet: using device tree for GPIO lookup [ 2.988708] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 3.000183] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 3.011505] smc91x 8000300.ethernet: using lookup tables for GPIO lookup [ 3.018707] smc91x 8000300.ethernet: lookup for GPIO reset failed [ 3.025665] smc91x 8000300.ethernet (unnamed net_device) (uninitialized): smc91x: IOADDR c890a300 doesn't match configuration (0). [ 3.038238] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre [ 3.053009] smc91x 8000300.ethernet eth0: SMC91C94 (rev 9) at c890a300 IRQ 261 [ 3.060821] [ 3.062469] smc91x 8000300.ethernet eth0: Ethernet addr: 10:03:31:33:16:8f [ 3.084411] mousedev: PS/2 mouse device common for all mice [ 3.090423] i2c /dev entries driver [ 3.101776] Driver 'mmcblk' needs updating - please use bus_type methods [ 3.113464] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.120056] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.127105] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.136871] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.146545] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.153747] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.159973] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.166442] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.173370] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.183135] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.192779] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.199951] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 3.255615] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 3.262023] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.269165] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.278961] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.288635] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.295867] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 3.302093] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.308563] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.315582] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.325378] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.335083] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.342193] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.349487] 480b4000.mmc supply vmmc not found, using dummy regulator [ 3.357269] omap_hsmmc 480b4000.mmc: could not set regulator OCR (-22) [ 3.365753] omap_hsmmc 480b4000.mmc: could not set regulator OCR (-22) [ 3.405364] ledtrig-cpu: registered to indicate activity on CPUs [ 3.416107] oprofile: using arm/armv6 [ 3.422454] TCP: cubic registered [ 3.426300] Initializing XFRM netlink socket [ 3.431427] NET: Registered protocol family 17 [ 3.436584] NET: Registered protocol family 15 [ 3.442443] Key type dns_resolver registered [ 3.447753] SmartReflex Class3 initialized [ 3.485321] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.492004] sr_init: No PMIC hook to init smartreflex [ 3.498474] sr_init: platform driver register failed for SR [ 3.624999] VUSB3V1: disabling [ 3.631195] VUSB1V8: disabling [ 3.637664] VUSB1V5: disabling [ 3.659729] Waiting for root device /dev/mmcblk0p1...