U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete m - CRC mode, 4(SOH)/4423(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00451c87 = 4529287 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4529223 Bytes = 4.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-rc1-129035-gedec178 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Mar 24 18:58:12 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c08f6100, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @eeea3000 s18496 r8192 d22464 u49152 [ 0.000000] pcpu-alloc: s18496 r8192 d22464 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260178 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1003348K/1047552K available (5884K kernel code, 591K rwdata, 2260K rodata, 428K init, 8219K bss, 27820K reserved, 16384K cma-reserved, 252928K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07fc4a4 (8146 kB) [ 0.000000] .init : 0xc07fd000 - 0xc0868000 ( 428 kB) [ 0.000000] .data : 0xc0868000 - 0xc08fbfa8 ( 592 kB) [ 0.000000] .bss : 0xc08fbfa8 - 0xc1102cd0 (8220 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000183] smp_twd: clock not found -2 [ 0.001770] Console: colour dummy device 80x30 [ 0.001831] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001831] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001831] ... MAX_LOCK_DEPTH: 48 [ 0.001861] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001861] ... CLASSHASH_SIZE: 4096 [ 0.001861] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001861] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001892] ... CHAINHASH_SIZE: 32768 [ 0.001892] memory used by lock dependency info: 5167 kB [ 0.001892] per task-struct memory footprint: 1152 bytes [ 0.001922] Calibrating local timer... 347.71MHz. [ 0.059051] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.098815] pid_max: default: 32768 minimum: 301 [ 0.099182] Security Framework initialized [ 0.099334] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.099334] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.102203] Initializing cgroup subsys blkio [ 0.102233] Initializing cgroup subsys memory [ 0.102294] Initializing cgroup subsys devices [ 0.102386] Initializing cgroup subsys freezer [ 0.102508] Initializing cgroup subsys perf_event [ 0.102569] CPU: Testing write buffer coherency: ok [ 0.103729] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.103820] Setting up static identity map for 0x80593388 - 0x805933f8 [ 0.148437] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.149169] Brought up 2 CPUs [ 0.149169] SMP: Total of 2 processors activated (2768.89 BogoMIPS). [ 0.149200] CPU: All CPU(s) started in SVC mode. [ 0.152008] devtmpfs: initialized [ 0.154083] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.158172] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.161956] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.211517] ------------[ cut here ]------------ [ 0.211547] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2458 _init+0x3a0/0x3f0() [ 0.211547] omap_hwmod: mailbox: doesn't have mpu register target base [ 0.211547] Modules linked in: [ 0.211578] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc1-129035-gedec178 #1 [ 0.211578] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 0.211608] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.211639] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.211700] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.211700] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.211730] [] (warn_slowpath_fmt) from [] (_init+0x3a0/0x3f0) [ 0.211761] [] (_init) from [] (omap_hwmod_for_each+0x30/0x5c) [ 0.211761] [] (omap_hwmod_for_each) from [] (__omap_hwmod_setup_all+0x24/0x40) [ 0.211791] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x80/0x1d8) [ 0.211791] [] (do_one_initcall) from [] (kernel_init_freeable+0x1fc/0x2d4) [ 0.211822] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.211853] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.211914] ---[ end trace 712ae477bb32c1f0 ]--- [ 0.322631] pinctrl core: initialized pinctrl subsystem [ 0.367675] NET: Registered protocol family 16 [ 0.373626] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.397369] cpuidle: using governor ladder [ 0.426788] cpuidle: using governor menu [ 0.435546] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.436340] OMAP GPIO hardware version 0.1 [ 0.437561] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.439331] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.441009] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.442749] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.444427] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.445861] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.467285] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.467773] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.469543] No ATAGs? [ 0.469635] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.469635] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.472137] OMAP DMA hardware revision 0.0 [ 0.551452] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.552215] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]' [ 0.556335] SCSI subsystem initialized [ 0.556823] libata version 3.00 loaded. [ 0.559234] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.560241] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.561309] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.562133] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.566223] Switched to clocksource 32k_counter [ 0.692993] NET: Registered protocol family 2 [ 0.694824] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.695098] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.697814] TCP: Hash tables configured (established 8192 bind 8192) [ 0.698059] TCP: reno registered [ 0.698089] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.698425] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.699523] NET: Registered protocol family 1 [ 0.700775] RPC: Registered named UNIX socket transport module. [ 0.700775] RPC: Registered udp transport module. [ 0.700805] RPC: Registered tcp transport module. [ 0.700805] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.701507] usbhs_omap 4a064000.usbhshost: refclk_60m_ext_p1 failed error:-2 [ 0.701599] usbhs_omap: probe of 4a064000.usbhshost failed with error -2 [ 0.707611] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.707916] audit: initializing netlink subsys (disabled) [ 0.708129] audit: type=2000 audit(0.700:1): initialized [ 0.711883] VFS: Disk quotas dquot_6.5.2 [ 0.712036] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.714263] NFS: Registering the id_resolver key type [ 0.714599] Key type id_resolver registered [ 0.714599] Key type id_legacy registered [ 0.714782] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.719024] bounce: pool size: 64 pages [ 0.719116] io scheduler noop registered [ 0.719146] io scheduler deadline registered [ 0.719207] io scheduler cfq registered (default) [ 0.721557] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.722015] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.724761] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.729919] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.729949] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.730377] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 225, base_baud = 3000000) is a OMAP UART0 [ 0.731811] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.731842] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.732055] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 226, base_baud = 3000000) is a OMAP UART1 [ 0.733062] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.733062] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.733276] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 227, base_baud = 3000000) is a OMAP UART2 [ 1.805145] console [ttyO2] enabled [ 1.809875] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.815734] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 1.825836] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 228, base_baud = 3000000) is a OMAP UART3 [ 1.860046] brd: module loaded [ 1.879180] loop: module loaded [ 1.884338] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.907470] twl 0-0048: PIH (irq 329) nested IRQs [ 1.936370] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.951904] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.962310] spi1.0 supply vdd-io not found, using dummy regulator [ 1.969329] ks8851 spi1.0: message enable is 0 [ 1.978912] ks8851 spi1.0 eth0: revision 1, MAC be:7c:81:02:a4:46, IRQ 201, no EEPROM [ 1.990966] mousedev: PS/2 mouse device common for all mice [ 1.996826] i2c /dev entries driver [ 2.003051] Driver 'mmcblk' needs updating - please use bus_type methods [ 2.011230] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.017547] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.024353] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.033935] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.043426] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.050537] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.056671] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.062927] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.069793] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.079345] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.088806] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.095825] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.136383] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.142669] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.149536] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.159088] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.168548] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.174407] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.176666] mmc0: new high speed SDHC card at address 0007 [ 2.178405] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.187316] mmcblk0: p1 p2 [ 2.197265] omap_hsmmc 480d5000.mmc: lookup for GPIO cd failed [ 2.203338] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.209655] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.216491] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.226043] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.235504] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.242523] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.249084] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.255981] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.263183] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.306610] ledtrig-cpu: registered to indicate activity on CPUs [ 2.312805] omap_hsmmc 480d5000.mmc: exceeding card's volts [ 2.319854] oprofile: no performance counters [ 2.325714] oprofile: using timer interrupt. [ 2.330871] TCP: cubic registered [ 2.334350] Initializing XFRM netlink socket [ 2.339019] NET: Registered protocol family 17 [ 2.343719] NET: Registered protocol family 15 [ 2.348693] Key type dns_resolver registered [ 2.353973] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.361206] omap2_set_init_voltage: unable to set vdd_mpu [ 2.366882] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.374176] omap2_set_init_voltage: unable to set vdd_core [ 2.379943] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.387115] omap2_set_init_voltage: unable to set vdd_iva [ 2.394592] Power Management for TI OMAP4+ devices. [ 2.399719] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.408111] ThumbEE CPU extension supported. [ 2.408111] Registering SWP/SWPB emulation handler [ 2.417663] SmartReflex Class3 initialized [ 2.427673] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.435211] sr_init: No PMIC hook to init smartreflex [ 2.440551] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.449676] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.458282] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 2.505737] VUSB: disabling [ 2.509521] VANA: disabling [ 2.513183] VDAC: disabling [ 2.519592] VAUX1_6030: disabling [ 2.525238] Waiting for root device /dev/mmcblk1p2... [ 2.556304] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.563476] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.696350] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.706665] mmc1: new high speed SDHC card at address b368 [ 2.713439] mmcblk1: mmc1:b368 USD 3.75 GiB [ 2.720947] mmcblk1: p1 p2 [ 2.739105] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.750305] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 2.764282] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 2.772186] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 3.871887] EXT4-fs (mmcblk1p2): recovery complete [ 4.337615] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.346374] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 4.356170] devtmpfs: mounted [ 4.356170] Freeing unused kernel memory: 428K (c07fd000 - c0868000) modprobe: FATAL: Could not load /lib/modules/4.0.0-rc1-129035-gedec178/modules.dep: No such file or directory INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 5.525329] udevd[111]: starting version 172 . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Activating swap...done. [ 7.411895] EXT4-fs (mmcblk1p2): warning: mounting fs with errors, running e2fsck is recommended [ 7.774261] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux 2.19.1 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...done. Cleaning up temporary files.... Setting kernel variables ...done. [ 11.404846] random: dd urandom read with 71 bits of entropy available INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Debian GNU/Linux wheezy/sid armel ttyO2 armel login: