0 U-Boot# U-Boot# ver U-Boot 2013.01-00161-g6e787b7 (Feb 06 2013 - 15:10:23) arm-none-eabi-gcc (Sourcery G++ Lite 2011.03-42) 4.5.2 GNU ld (Sourcery G++ Lite 2011.03-42) 2.20.51.20100809 U-Boot# setenv bootargs console=ttyO0,115200n8 debug ignore_loglevel earlyprintk=serial init=/bin/sh mem=128M root=/dev/ram rw initrd=0x82000000,16MB ramdisk_size=65536 U-Boot# U-Boot# setenv serverip 192.168.57.1 U-Boot# U-Boot# setenv bootfile uImage-dtb.am335x-bone U-Boot# U-Boot# dhcp 81000000 link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.57.137 Using cpsw device TFTP from server 192.168.57.1; our IP address is 192.168.57.137 Filename 'uImage-dtb.am335x-bone'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################### 752 KiB/s done Bytes transferred = 4350633 (4262a9 hex) U-Boot# mmc rescan 0 U-Boot# U-Boot# fatload mmc 0 82000000 ramdisk-pm.gz reading ramdisk-pm.gz 2022580 bytes read in 239 ms (8.1 MiB/s) U-Boot# U-Boot# bootm 81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4350569 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-rc1-00003-gedec178 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Mar 24 18:55:19 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x87000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c0865dc0, node_mem_map c6ed1000 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES1.0 (sgx neon ) [ 0.000000] PERCPU: Embedded 12 pages/cpu @c6ea7000 s18368 r8192 d22592 u49152 [ 0.000000] pcpu-alloc: s18368 r8192 d22592 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyO0,115200n8 debug ignore_loglevel earlyprintk=serial init=/bin/sh mem=128M root=/dev/ram rw initrd=0x82000000,16MB ramdisk_size=65536 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 79976K/131072K available (5774K kernel code, 335K rwdata, 2124K rodata, 356K init, 8216K bss, 34712K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07becc4 (7900 kB) [ 0.000000] .init : 0xc07bf000 - 0xc0818000 ( 356 kB) [ 0.000000] .data : 0xc0818000 - 0xc086bc68 ( 336 kB) [ 0.000000] .bss : 0xc086bc68 - 0xc1071f10 (8217 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000021] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns [ 0.000098] OMAP clocksource: timer1 at 24000000 Hz [ 0.001413] Console: colour dummy device 80x30 [ 0.001492] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001508] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001522] ... MAX_LOCK_DEPTH: 48 [ 0.001535] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001548] ... CLASSHASH_SIZE: 4096 [ 0.001561] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001574] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001587] ... CHAINHASH_SIZE: 32768 [ 0.001600] memory used by lock dependency info: 5167 kB [ 0.001614] per task-struct memory footprint: 1152 bytes [ 0.001654] Calibrating delay loop... 548.04 BogoMIPS (lpj=2740224) [ 0.108256] pid_max: default: 32768 minimum: 301 [ 0.108803] Security Framework initialized [ 0.109075] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.109107] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.113754] Initializing cgroup subsys blkio [ 0.113819] Initializing cgroup subsys memory [ 0.113971] Initializing cgroup subsys devices [ 0.114123] Initializing cgroup subsys freezer [ 0.114318] Initializing cgroup subsys perf_event [ 0.114439] CPU: Testing write buffer coherency: ok [ 0.116505] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.116680] Setting up static identity map for 0x805792b8 - 0x80579328 [ 0.122226] Brought up 1 CPUs [ 0.122262] SMP: Total of 1 processors activated (548.04 BogoMIPS). [ 0.122279] CPU: All CPU(s) started in SVC mode. [ 0.126907] devtmpfs: initialized [ 0.131015] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.192609] omap_hwmod: tptc0 using broken dt data from edma [ 0.193263] omap_hwmod: tptc1 using broken dt data from edma [ 0.193892] omap_hwmod: tptc2 using broken dt data from edma [ 0.205255] omap_hwmod: debugss: _wait_target_disable failed [ 0.267379] pinctrl core: initialized pinctrl subsystem [ 0.321735] NET: Registered protocol family 16 [ 0.333977] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.337363] cpuidle: using governor ladder [ 0.337408] cpuidle: using governor menu [ 0.348821] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.350216] OMAP GPIO hardware version 0.1 [ 0.352132] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.355141] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.358052] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.376669] No ATAGs? [ 0.376717] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.442924] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.444078] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]' [ 0.449670] SCSI subsystem initialized [ 0.450812] libata version 3.00 loaded. [ 0.452397] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe [ 0.452458] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral [ 0.459422] Switched to clocksource timer1 [ 0.686646] NET: Registered protocol family 2 [ 0.689784] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.690030] TCP bind hash table entries: 1024 (order: 3, 36864 bytes) [ 0.690661] TCP: Hash tables configured (established 1024 bind 1024) [ 0.690940] TCP: reno registered [ 0.690984] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.691332] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.692961] NET: Registered protocol family 1 [ 0.695581] RPC: Registered named UNIX socket transport module. [ 0.695614] RPC: Registered udp transport module. [ 0.695631] RPC: Registered tcp transport module. [ 0.695648] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.697952] Trying to unpack rootfs image as initramfs... [ 0.700724] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.909504] Freeing initrd memory: 16384K (c2000000 - c3000000) [ 0.910368] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.917037] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.917502] audit: initializing netlink subsys (disabled) [ 0.917915] audit: type=2000 audit(0.910:1): initialized [ 0.925174] VFS: Disk quotas dquot_6.5.2 [ 0.925422] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.929386] NFS: Registering the id_resolver key type [ 0.929932] Key type id_resolver registered [ 0.929957] Key type id_legacy registered [ 0.930262] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.937158] io scheduler noop registered [ 0.937208] io scheduler deadline registered [ 0.937290] io scheduler cfq registered (default) [ 0.940163] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.943590] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.953208] omap_uart 44e09000.serial: no wakeirq for uart0 [ 0.953267] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@44e09000[0]' [ 0.954071] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 154, base_baud = 3000000) is a OMAP UART0 [ 1.742840] console [ttyO0] enabled [ 1.793937] brd: module loaded [ 1.824816] loop: module loaded [ 1.831778] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.846305] mousedev: PS/2 mouse device common for all mice [ 1.852335] i2c /dev entries driver [ 1.856428] Driver 'mmcblk' needs updating - please use bus_type methods [ 1.865257] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 1.871682] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.878585] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) [ 1.889082] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.893944] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 1.900302] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.907157] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 1.916779] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 1.926305] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 1.933554] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 1.941053] omap_hsmmc 48060000.mmc: unable to get vmmc regulator -517 [ 1.948804] platform 48060000.mmc: Driver omap_hsmmc requests probe deferral [ 1.956724] ledtrig-cpu: registered to indicate activity on CPUs [ 1.964501] oprofile: using arm/armv7 [ 1.969585] TCP: cubic registered [ 1.973131] Initializing XFRM netlink socket [ 1.977820] NET: Registered protocol family 17 [ 1.982714] NET: Registered protocol family 15 [ 1.987882] Key type dns_resolver registered [ 1.992882] omap_voltage_late_init: Voltage driver support not added [ 2.001198] ThumbEE CPU extension supported. [ 2.005762] Registering SWP/SWPB emulation handler [ 2.061349] tps65217 0-0024: TPS65217 ID 0xf version 1.1 [ 2.067073] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.074533] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 2.080959] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 2.087869] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) [ 2.098365] omap_hsmmc 48060000.mmc: Got CD GPIO [ 2.103281] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 2.109623] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 2.116478] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 2.126096] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 2.135617] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 2.142703] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 2.247757] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.258998] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.265400] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.273971] mmc0: new high speed SDHC card at address 1234 [ 2.284577] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 2.293572] libphy: 4a101000.mdio: probed [ 2.297819] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.310085] cpsw 4a100000.ethernet: Detected MACID = d4:94:a1:90:76:28 [ 2.321324] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.359195] vmmcsd_fixed: disabling [ 2.370065] mmcblk0: p1 p2 [ 2.379472] RAMDISK: gzip image found at block 0 [ 2.888507] VFS: Mounted root (ext2 filesystem) on device 1:0. [ 2.896332] devtmpfs: mounted [ 2.900637] Freeing unused kernel memory: 356K (c07bf000 - c0818000) /bin/sh: can't access tty; job coÿ/ # / # / #