Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### done Bytes transferred = 4543242 (45530a hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4543178 Bytes = 4.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-rc1-129035-gedec178 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Mar 24 18:58:12 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c08f6100, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 12 pages/cpu @cfc3f000 s18496 r8192 d22464 u49152 [ 0.000000] pcpu-alloc: s18496 r8192 d22464 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 224260K/261120K available (5884K kernel code, 591K rwdata, 2260K rodata, 428K init, 8219K bss, 20476K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07fc4a4 (8146 kB) [ 0.000000] .init : 0xc07fd000 - 0xc0868000 ( 428 kB) [ 0.000000] .data : 0xc0868000 - 0xc08fbfa8 ( 592 kB) [ 0.000000] .bss : 0xc08fbfa8 - 0xc1102cd0 (8220 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000032] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns [ 0.000146] OMAP clocksource: timer1 at 13000000 Hz [ 0.001582] Console: colour dummy device 80x30 [ 0.001670] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001688] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001703] ... MAX_LOCK_DEPTH: 48 [ 0.001717] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001731] ... CLASSHASH_SIZE: 4096 [ 0.001744] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001758] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001771] ... CHAINHASH_SIZE: 32768 [ 0.001785] memory used by lock dependency info: 5167 kB [ 0.001799] per task-struct memory footprint: 1152 bytes [ 0.001840] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.105842] pid_max: default: 32768 minimum: 301 [ 0.106471] Security Framework initialized [ 0.106743] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106772] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.111658] Initializing cgroup subsys blkio [ 0.111728] Initializing cgroup subsys memory [ 0.111870] Initializing cgroup subsys devices [ 0.112017] Initializing cgroup subsys freezer [ 0.112232] Initializing cgroup subsys perf_event [ 0.112367] CPU: Testing write buffer coherency: ok [ 0.114537] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.114759] Setting up static identity map for 0x80593388 - 0x805933f8 [ 0.120988] Brought up 1 CPUs [ 0.121024] SMP: Total of 1 processors activated (597.60 BogoMIPS). [ 0.121044] CPU: All CPU(s) started in SVC mode. [ 0.126567] devtmpfs: initialized [ 0.140185] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.217482] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.219691] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.300804] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.300841] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.319954] pinctrl core: initialized pinctrl subsystem [ 0.433316] NET: Registered protocol family 16 [ 0.446162] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.449756] cpuidle: using governor ladder [ 0.449812] cpuidle: using governor menu [ 0.460184] Reprogramming SDRC clock to 332000000 Hz [ 0.464218] In-band Error seen by USB_OTG at address 0 [ 0.464249] ------------[ cut here ]------------ [ 0.464297] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.464315] Modules linked in: [ 0.464348] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc1-129035-gedec178 #1 [ 0.464365] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.464426] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.464471] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.464517] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.464550] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.464580] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.464617] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x60/0x1f4) [ 0.464647] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.464677] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.464705] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.464730] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.464756] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.464787] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.464806] Exception stack(0xce0a3cc8 to 0xce0a3d10) [ 0.464830] 3cc0: 00000001 ce0a1130 00000000 ce0a0b80 60000153 ce013c60 [ 0.464855] 3ce0: ce013c60 00000000 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d10 [ 0.464876] 3d00: c00846ac c0590fbc 20000153 ffffffff [ 0.464903] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.464931] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.464960] [] (__setup_irq) from [] (request_threaded_irq+0xa8/0x134) [ 0.464990] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.465029] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.465060] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 0.465089] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.465116] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.465143] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.465170] [] (bus_probe_device) from [] (device_add+0x2ec/0x4e8) [ 0.465211] [] (device_add) from [] (of_platform_device_create_pdata+0xec/0x148) [ 0.465241] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.465270] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.465313] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.465342] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.465375] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.465403] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.465431] [] (do_one_initcall) from [] (kernel_init_freeable+0x1fc/0x2d4) [ 0.465459] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.465489] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.465659] ---[ end trace 208b75109747d117 ]--- [ 0.466773] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.477174] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.478792] OMAP GPIO hardware version 2.5 [ 0.480955] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.484160] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.487514] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.490612] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.493720] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.510266] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.511143] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.523078] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.526700] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.690321] No ATAGs? [ 0.690377] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.694446] OMAP DMA hardware revision 4.0 [ 0.790122] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.791629] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.792880] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.794116] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.795256] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.796641] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.796711] platform wl12xx_vmmc2: Driver reg-fixed-voltage requests probe deferral [ 0.796960] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.798061] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/pinmux@48002030/pinmux_sb_t35_audio_amp, deferring probe [ 0.798117] platform audio_amp: Driver reg-fixed-voltage requests probe deferral [ 0.798348] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.799392] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.806750] SCSI subsystem initialized [ 0.808014] libata version 3.00 loaded. [ 0.809296] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.809362] platform hsusb1_phy: Driver usb_phy_generic requests probe deferral [ 0.809504] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.809551] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral [ 0.810478] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c1_pins, deferring probe [ 0.810532] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.813114] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.813584] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c3_pins, deferring probe [ 0.813646] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.821405] Switched to clocksource timer1 [ 1.055601] NET: Registered protocol family 2 [ 1.058643] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.058917] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.060064] TCP: Hash tables configured (established 2048 bind 2048) [ 1.060408] TCP: reno registered [ 1.060458] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.060983] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.062564] NET: Registered protocol family 1 [ 1.065445] RPC: Registered named UNIX socket transport module. [ 1.065485] RPC: Registered udp transport module. [ 1.065504] RPC: Registered tcp transport module. [ 1.065522] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.072144] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.081688] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.082147] audit: initializing netlink subsys (disabled) [ 1.082602] audit: type=2000 audit(1.080:1): initialized [ 1.090113] VFS: Disk quotas dquot_6.5.2 [ 1.090359] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.094553] NFS: Registering the id_resolver key type [ 1.095167] Key type id_resolver registered [ 1.095198] Key type id_legacy registered [ 1.095503] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.103697] io scheduler noop registered [ 1.103756] io scheduler deadline registered [ 1.103855] io scheduler cfq registered (default) [ 1.107827] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.108670] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.116584] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.127241] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.127299] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.128224] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.132125] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.132183] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.132633] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.135066] omap_uart 49020000.serial: no wakeirq for uart0 [ 1.135119] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.135589] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.545144] console [ttyO2] enabled [ 2.601791] brd: module loaded [ 2.635029] loop: module loaded [ 2.643297] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.652639] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.659310] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.664251] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.672408] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.678695] Creating 5 MTD partitions on "omap2-nand.0": [ 2.684345] 0x000000000000-0x000000080000 : "xloader" [ 2.698711] 0x000000080000-0x000000260000 : "uboot" [ 2.710626] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.722145] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.735705] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.214733] libphy: smsc911x-mdio: probed [ 3.219493] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.233175] smsc911x 2d000000.ethernet eth0: MAC Address: 1a:ee:4b:5f:6a:50 [ 3.290814] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.297304] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.307876] libphy: davinci_mdio.0: probed [ 3.312374] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.321000] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.334829] mousedev: PS/2 mouse device common for all mice [ 3.340880] i2c /dev entries driver [ 3.347345] Driver 'mmcblk' needs updating - please use bus_type methods [ 3.357218] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.363726] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.370790] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.381170] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.386024] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.392367] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.399254] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.409619] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.452467] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.458787] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.465768] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.475394] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.484903] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.492270] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.499192] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.506981] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 3.515150] ledtrig-cpu: registered to indicate activity on CPUs [ 3.523778] oprofile: using arm/armv7 [ 3.528836] TCP: cubic registered [ 3.532531] Initializing XFRM netlink socket [ 3.537312] NET: Registered protocol family 17 [ 3.542190] NET: Registered protocol family 15 [ 3.547446] Key type dns_resolver registered [ 3.552404] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.559964] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.566095] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.573434] omap2_set_init_voltage: unable to set vdd_core [ 3.581092] PM: no software I/O chain control; some wakeups may be lost [ 3.588042] pm: Failed to request pm_wkup irq [ 3.592748] ThumbEE CPU extension supported. [ 3.597280] Registering SWP/SWPB emulation handler [ 3.602389] SmartReflex Class3 initialized [ 3.626579] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.638720] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.649739] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.656697] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.663937] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.674049] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.681483] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.688603] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.698483] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.708268] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.715624] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.724569] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.731539] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.738729] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.748839] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.756289] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.763460] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.773348] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.783137] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.790433] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.804607] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.815120] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.822407] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.828711] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.835682] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.845310] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.854825] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.861900] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.879781] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.890462] mmc0: new high speed SDHC card at address b368 [ 3.899765] mmcblk0: mmc0:b368 NCard 3.73 GiB [ 3.912400] mmcblk0: p1 p2 [ 3.988716] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.995484] sr_init: No PMIC hook to init smartreflex [ 4.001343] sr_init: platform driver register failed for SR [ 4.084430] ads7846-reg: disabling [ 4.088045] hsusb2_vbus: disabling [ 4.091737] hsusb1_vbus: disabling [ 4.125281] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.137996] devtmpfs: mounted [ 4.142765] Freeing unused kernel memory: 428K (c07fd000 - c0868000) /bin/sh: can't access tty; job control turned off # # #