U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 4(SOH)/3440(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0035c0b0 = 3522736 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3522672 Bytes = 3.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc1-13139-g9a258af (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Jul 23 06:57:15 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c09701c0, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @eee96000 s20672 r8192 d24384 u53248 [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260178 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1002780K/1047552K available (6297K kernel code, 738K rwdata, 2188K rodata, 432K init, 8225K bss, 28388K reserved, 16384K cma-reserved, 252928K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0851850 (8487 kB) [ 0.000000] .init : 0xc0852000 - 0xc08be000 ( 432 kB) [ 0.000000] .data : 0xc08be000 - 0xc0976860 ( 739 kB) [ 0.000000] .bss : 0xc0979000 - 0xc11816d0 (8226 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002075] Console: colour dummy device 80x30 [ 0.002136] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002136] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002166] ... MAX_LOCK_DEPTH: 48 [ 0.002166] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002166] ... CLASSHASH_SIZE: 4096 [ 0.002166] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002197] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002197] ... CHAINHASH_SIZE: 32768 [ 0.002197] memory used by lock dependency info: 5167 kB [ 0.002227] per task-struct memory footprint: 1536 bytes [ 0.002227] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080352] pid_max: default: 32768 minimum: 301 [ 0.080749] Security Framework initialized [ 0.080871] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080902] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084106] Initializing cgroup subsys blkio [ 0.084136] Initializing cgroup subsys memory [ 0.084259] Initializing cgroup subsys devices [ 0.084350] Initializing cgroup subsys freezer [ 0.084472] Initializing cgroup subsys perf_event [ 0.084533] CPU: Testing write buffer coherency: ok [ 0.085937] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086059] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180297] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181213] Brought up 2 CPUs [ 0.181243] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181243] CPU: All CPU(s) started in SVC mode. [ 0.184661] devtmpfs: initialized [ 0.241516] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.246673] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.251495] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.439361] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.441986] pinctrl core: initialized pinctrl subsystem [ 0.447143] NET: Registered protocol family 16 [ 0.452606] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.480529] cpuidle: using governor ladder [ 0.510375] cpuidle: using governor menu [ 0.523742] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.524597] OMAP GPIO hardware version 0.1 [ 0.525848] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.527770] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.529693] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.531646] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.533508] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.555053] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.555603] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.563781] No ATAGs? [ 0.563842] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.563873] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.566955] OMAP DMA hardware revision 0.0 [ 0.625976] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.626831] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.627685] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.631958] SCSI subsystem initialized [ 0.632507] libata version 3.00 loaded. [ 0.633239] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.633758] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.633850] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.633941] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.638732] clocksource: Switched to clocksource 32k_counter [ 0.790374] NET: Registered protocol family 2 [ 0.792572] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.792755] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.795318] TCP: Hash tables configured (established 8192 bind 8192) [ 0.795623] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.795989] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.797119] NET: Registered protocol family 1 [ 0.798950] RPC: Registered named UNIX socket transport module. [ 0.798980] RPC: Registered udp transport module. [ 0.798980] RPC: Registered tcp transport module. [ 0.798980] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.804107] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 0.804168] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.809753] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.810058] audit: initializing netlink subsys (disabled) [ 0.810272] audit: type=2000 audit(0.790:1): initialized [ 0.814086] VFS: Disk quotas dquot_6.6.0 [ 0.814239] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.816864] NFS: Registering the id_resolver key type [ 0.817291] Key type id_resolver registered [ 0.817321] Key type id_legacy registered [ 0.817504] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.822387] bounce: pool size: 64 pages [ 0.822509] io scheduler noop registered [ 0.822540] io scheduler deadline registered [ 0.822570] io scheduler cfq registered (default) [ 0.826232] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.826934] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.832305] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.838378] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.838409] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.839019] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.841003] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.841003] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.841308] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.842468] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.842498] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.842773] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.845001] console [ttyO2] enabled [ 1.876068] brd: module loaded [ 1.896514] loop: module loaded [ 1.902862] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.916534] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.926971] spi1.0 supply vdd-io not found, using dummy regulator [ 1.933868] spi1.0 supply vdd not found, using dummy regulator [ 1.940216] ks8851 spi1.0: message enable is 0 [ 1.951232] ks8851 spi1.0 eth0: revision 1, MAC 2a:78:36:ff:1a:f7, IRQ 202, no EEPROM [ 1.963684] mousedev: PS/2 mouse device common for all mice [ 1.969573] i2c /dev entries driver [ 1.974853] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.981170] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.988006] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.997589] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.007080] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.014251] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.020385] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.026672] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.033538] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.043121] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.052612] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.059631] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.066558] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.110565] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.116851] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.123718] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.133300] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.142791] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.149810] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.156555] omap_hsmmc 480d1000.mmc: unable to get vmmc regulator -517 [ 2.189147] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.195404] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.202331] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.212707] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.217529] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.223846] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.230712] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.240264] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.249755] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.256774] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.299652] ledtrig-cpu: registered to indicate activity on CPUs [ 2.307189] oprofile: using arm/armv7-ca9 [ 2.312469] Initializing XFRM netlink socket [ 2.317169] NET: Registered protocol family 17 [ 2.321960] NET: Registered protocol family 15 [ 2.326965] Key type dns_resolver registered [ 2.331787] twl: not initialized [ 2.335205] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.343658] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.352111] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.360534] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.368957] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.377349] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.385772] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.394195] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.401428] omap2_set_init_voltage: unable to set vdd_mpu [ 2.407104] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.414398] omap2_set_init_voltage: unable to set vdd_core [ 2.420196] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.427398] omap2_set_init_voltage: unable to set vdd_iva [ 2.435241] Power Management for TI OMAP4+ devices. [ 2.440399] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.447601] ThumbEE CPU extension supported. [ 2.453399] Registering SWP/SWPB emulation handler [ 2.458435] SmartReflex Class3 initialized [ 2.468719] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.480377] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.480377] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.494415] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.504516] no flags found for reset [ 2.504516] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.515686] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.522827] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.528656] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.539398] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.549713] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.563934] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.567169] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.569213] mmc0: new high speed SDHC card at address b368 [ 2.574096] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.577209] mmcblk0: p1 p2 [ 2.598999] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.608764] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.617004] twl 0-0048: PIH (irq 327) nested IRQs [ 2.640167] VUSIM: failed to get the current voltage(-22) [ 2.648590] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.648590] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.682250] twl6040 0-004b: clk32k is not handled [ 2.690826] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.705139] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.713623] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.723205] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.729278] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.736297] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.743133] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.752716] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.752746] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.769226] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.769226] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.781646] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.781677] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.798065] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.807556] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.807586] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.869628] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.869628] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.882781] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.892364] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.901855] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.908874] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.957031] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.967803] mmc1: new high speed SDHC card at address 0007 [ 2.974853] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.982360] mmcblk1: p1 p2 [ 3.031524] hctosys: unable to open rtc device (rtc0) [ 3.034332] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.045379] sr_init: No PMIC hook to init smartreflex [ 3.048828] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.052520] mmc2: new SDIO card at address 0001 [ 3.061218] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.070281] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.078948] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.131713] VUSB: disabling [ 3.135589] VANA: disabling [ 3.140747] VDAC: disabling [ 3.146331] VAUX1_6030: disabling [ 3.150146] vwl1271: disabling [ 3.159790] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 3.172271] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.211853] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.219543] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 7.159851] EXT4-fs (mmcblk1p2): recovery complete [ 7.184631] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.184631] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.207763] devtmpfs: mounted [ 7.207763] Freeing unused kernel memory: 432K (c0852000 - c08be000) [ 7.519927] random: init urandom read with 29 bits of entropy available [ 7.540557] init: Failed to create pty - disabling logging for job [ 7.540557] init: Temporary process spawn error: No space left on device [ 7.602264] init: Failed to create pty - disabling logging for job [ 7.608947] init: Temporary process spawn error: No space left on device [ 7.632293] init: Failed to create pty - disabling logging for job [ 7.639434] init: Temporary process spawn error: No space left on device [ 7.649993] init: Failed to create pty - disabling logging for job [ 7.658203] init: Temporary process spawn error: No space left on device [ 7.800659] init: ureadahead main process (55) terminated with status 5 [ 8.003082] init: Failed to create pty - disabling logging for job [ 8.009613] init: Temporary process spawn error: No space left on device [ 8.051422] init: Failed to create pty - disabling logging for job [ 8.051422] init: Temporary process spawn error: No space left on device [ 8.150054] init: Failed to create pty - disabling logging for job [ 8.150054] init: Temporary process spawn error: No space left on device [ 8.633880] udevd[110]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177384/963584 files, 2988601/7708672 blocks [ 11.831909] init: udev-fallback-graphics main process (359) terminated with status 1 [ 11.959564] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 12.085205] init: plymouth main process (56) killed by SEGV signal [ 12.096069] init: plymouth-splash main process (384) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.438842] random: nonblocking pool is initialized [ 12.673889] init: plymouth-log main process (456) terminated with status 1 [ 12.704437] init: failsafe main process (458) killed by TERM signal [ 13.523315] init: plymouth-upstart-bridge main process (506) terminated with status 1 [ 13.726593] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.360656] init: bluetooth main process (512) terminated with status 1 [ 14.367706] init: bluetooth main process ended, respawning [ 14.480682] init: alsa-restore main process (551) terminated with status 19 [ 14.522033] init: hybrid-gfx main process (566) terminated with status 1 FATAL: Could not load /lib/modules/4.2.0-rc1-13139-g9a258af/modules.dep: No such file or directory [ 15.331695] init: bluetooth main process (651) terminated with status 1 [ 15.340240] init: bluetooth main process ended, respawning [ 15.673797] init: bluetooth main process (685) terminated with status 1 [ 15.682373] init: bluetooth main process ended, respawning [ 15.867034] init: bluetooth main process (710) terminated with status 1 [ 15.874420] init: bluetooth main process ended, respawning [ 16.052734] init: bluetooth main process (733) terminated with status 1 [ 16.059997] init: bluetooth main process ended, respawning [ 16.356964] init: bluetooth main process (759) terminated with status 1 [ 16.380706] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 16.784637] init: bluetooth main process (798) terminated with status 1 [ 16.791717] init: bluetooth main process ended, respawning [ 16.826812] init: lightdm main process (607) terminated with status 1 [ 17.014129] init: bluetooth main process (823) terminated with status 1 [ 17.022064] init: bluetooth main process ended, respawning [ 17.204467] init: bluetooth main process (846) terminated with status 1 [ 17.212554] init: bluetooth main process ended, respawning