Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### done Bytes transferred = 4543138 (4552a2 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4543074 Bytes = 4.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-rc1-00002-g82a17660 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Fri Apr 3 12:42:40 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c08f5e40, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 12 pages/cpu @cfc3f000 s18496 r8192 d22464 u49152 [ 0.000000] pcpu-alloc: s18496 r8192 d22464 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 224260K/261120K available (5884K kernel code, 591K rwdata, 2260K rodata, 428K init, 8219K bss, 20476K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07fc4a4 (8146 kB) [ 0.000000] .init : 0xc07fd000 - 0xc0868000 ( 428 kB) [ 0.000000] .data : 0xc0868000 - 0xc08fbce8 ( 592 kB) [ 0.000000] .bss : 0xc08fbce8 - 0xc1102a10 (8220 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000031] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns [ 0.000144] OMAP clocksource: timer1 at 13000000 Hz [ 0.001581] Console: colour dummy device 80x30 [ 0.001669] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001688] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001703] ... MAX_LOCK_DEPTH: 48 [ 0.001717] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001731] ... CLASSHASH_SIZE: 4096 [ 0.001744] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001757] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001771] ... CHAINHASH_SIZE: 32768 [ 0.001785] memory used by lock dependency info: 5167 kB [ 0.001800] per task-struct memory footprint: 1152 bytes [ 0.001843] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.095871] pid_max: default: 32768 minimum: 301 [ 0.096494] Security Framework initialized [ 0.096764] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096793] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101645] Initializing cgroup subsys blkio [ 0.101720] Initializing cgroup subsys memory [ 0.101865] Initializing cgroup subsys devices [ 0.102012] Initializing cgroup subsys freezer [ 0.102221] Initializing cgroup subsys perf_event [ 0.102357] CPU: Testing write buffer coherency: ok [ 0.104522] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.104748] Setting up static identity map for 0x80593388 - 0x805933f8 [ 0.110960] Brought up 1 CPUs [ 0.110995] SMP: Total of 1 processors activated (597.60 BogoMIPS). [ 0.111014] CPU: All CPU(s) started in SVC mode. [ 0.116501] devtmpfs: initialized [ 0.130107] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.207334] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.209535] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.290569] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.290608] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.309720] pinctrl core: initialized pinctrl subsystem [ 0.421260] NET: Registered protocol family 16 [ 0.433760] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.437560] cpuidle: using governor ladder [ 0.437616] cpuidle: using governor menu [ 0.447930] Reprogramming SDRC clock to 332000000 Hz [ 0.451957] In-band Error seen by USB_OTG at address 0 [ 0.451987] ------------[ cut here ]------------ [ 0.452036] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.452053] Modules linked in: [ 0.452087] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc1-00002-g82a17660 #1 [ 0.452103] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.452163] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.452208] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.452255] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.452287] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.452317] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.452354] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x60/0x1f4) [ 0.452382] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.452413] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.452440] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.452465] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.452492] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.452523] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.452542] Exception stack(0xce0a3cc8 to 0xce0a3d10) [ 0.452566] 3cc0: 00000001 ce0a1130 00000000 ce0a0b80 60000153 ce013c60 [ 0.452591] 3ce0: ce013c60 00000000 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d10 [ 0.452611] 3d00: c00846ac c0590fbc 20000153 ffffffff [ 0.452639] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.452667] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.452695] [] (__setup_irq) from [] (request_threaded_irq+0xa8/0x134) [ 0.452724] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.452763] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.452793] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 0.452822] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.452849] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.452875] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.452901] [] (bus_probe_device) from [] (device_add+0x2ec/0x4e8) [ 0.452943] [] (device_add) from [] (of_platform_device_create_pdata+0xec/0x148) [ 0.452973] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.453002] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.453045] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.453074] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.453108] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.453137] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.453164] [] (do_one_initcall) from [] (kernel_init_freeable+0x1fc/0x2d4) [ 0.453193] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.453222] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.453391] ---[ end trace 8e214017b1cd5004 ]--- [ 0.454347] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.464763] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.466547] OMAP GPIO hardware version 2.5 [ 0.468731] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.471951] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.475105] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.478394] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.481531] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.498089] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.498965] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.510885] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.514321] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.680338] No ATAGs? [ 0.680394] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.684460] OMAP DMA hardware revision 4.0 [ 0.779853] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.781361] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.782618] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.783861] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.784995] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.786374] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.786446] platform wl12xx_vmmc2: Driver reg-fixed-voltage requests probe deferral [ 0.786700] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.787813] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/pinmux@48002030/pinmux_sb_t35_audio_amp, deferring probe [ 0.787868] platform audio_amp: Driver reg-fixed-voltage requests probe deferral [ 0.788097] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.789146] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.796496] SCSI subsystem initialized [ 0.797756] libata version 3.00 loaded. [ 0.799021] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.799088] platform hsusb1_phy: Driver usb_phy_generic requests probe deferral [ 0.799229] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.799277] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral [ 0.800196] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c1_pins, deferring probe [ 0.800253] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.802825] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.803293] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c3_pins, deferring probe [ 0.803355] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.811114] Switched to clocksource timer1 [ 1.044307] NET: Registered protocol family 2 [ 1.047318] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.047599] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.048745] TCP: Hash tables configured (established 2048 bind 2048) [ 1.049088] TCP: reno registered [ 1.049141] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.049463] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.051206] NET: Registered protocol family 1 [ 1.054098] RPC: Registered named UNIX socket transport module. [ 1.054137] RPC: Registered udp transport module. [ 1.054156] RPC: Registered tcp transport module. [ 1.054174] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.060760] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.070041] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.070731] audit: initializing netlink subsys (disabled) [ 1.071206] audit: type=2000 audit(1.070:1): initialized [ 1.078728] VFS: Disk quotas dquot_6.5.2 [ 1.078976] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.083116] NFS: Registering the id_resolver key type [ 1.083731] Key type id_resolver registered [ 1.083759] Key type id_legacy registered [ 1.084054] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.092229] io scheduler noop registered [ 1.092286] io scheduler deadline registered [ 1.092380] io scheduler cfq registered (default) [ 1.096361] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.097213] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.105068] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.115729] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.115788] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.116713] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.119733] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.119788] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.120268] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.123376] omap_uart 49020000.serial: no wakeirq for uart0 [ 1.123435] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.123914] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.533530] console [ttyO2] enabled [ 2.589811] brd: module loaded [ 2.623160] loop: module loaded [ 2.631442] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.640750] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.647416] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.652319] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.660510] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.666798] Creating 5 MTD partitions on "omap2-nand.0": [ 2.672449] 0x000000000000-0x000000080000 : "xloader" [ 2.686870] 0x000000080000-0x000000260000 : "uboot" [ 2.698741] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.710096] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.723763] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.202921] libphy: smsc911x-mdio: probed [ 3.207676] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.221343] smsc911x 2d000000.ethernet eth0: MAC Address: 32:c0:76:09:8c:aa [ 3.280524] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.287019] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.297602] libphy: davinci_mdio.0: probed [ 3.302144] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.310777] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.324604] mousedev: PS/2 mouse device common for all mice [ 3.330651] i2c /dev entries driver [ 3.337112] Driver 'mmcblk' needs updating - please use bus_type methods [ 3.346982] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.353492] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.360544] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.370929] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.375781] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.382123] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.389011] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.399371] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.442176] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.448495] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.455465] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.465092] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.474606] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.481973] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.488905] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.496694] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 3.504862] ledtrig-cpu: registered to indicate activity on CPUs [ 3.513494] oprofile: using arm/armv7 [ 3.518547] TCP: cubic registered [ 3.522244] Initializing XFRM netlink socket [ 3.527017] NET: Registered protocol family 17 [ 3.531899] NET: Registered protocol family 15 [ 3.537157] Key type dns_resolver registered [ 3.542111] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.549679] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.555808] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.563150] omap2_set_init_voltage: unable to set vdd_core [ 3.570808] PM: no software I/O chain control; some wakeups may be lost [ 3.577756] pm: Failed to request pm_wkup irq [ 3.582469] ThumbEE CPU extension supported. [ 3.587000] Registering SWP/SWPB emulation handler [ 3.592103] SmartReflex Class3 initialized [ 3.616281] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.628416] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.639420] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.646372] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.653606] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.663726] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.671157] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.678272] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.688157] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.697943] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.705295] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.714207] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.721195] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.728382] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.738503] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.745941] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.753101] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.762988] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.772787] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.780081] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.794218] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.804698] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.811973] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.818278] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.825244] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.834869] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.844389] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.851461] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.869315] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.879995] mmc0: new high speed SDHC card at address b368 [ 3.889258] mmcblk0: mmc0:b368 NCard 3.73 GiB [ 3.901798] mmcblk0: p1 p2 [ 3.978403] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.985166] sr_init: No PMIC hook to init smartreflex [ 3.991010] sr_init: platform driver register failed for SR [ 4.074050] ads7846-reg: disabling [ 4.077668] hsusb2_vbus: disabling [ 4.081362] hsusb1_vbus: disabling [ 4.115117] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.127834] devtmpfs: mounted [ 4.132630] Freeing unused kernel memory: 428K (c07fd000 - c0868000) /bin/sh: can't access tty; job control turned off # # #