U-Boot 1.1.4 (Mar 18 2007 - 12:22:00)

OMAP2430C-GP revision 3, PRCM #5A
TI 2430SDP 1.1 Version + mDDR (Boot NOR)
DRAM:  128 MB
Flash: 192 MB
NAND:64 MB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  3  0 
OMAP243X SDP # 
OMAP243X SDP # setenv bootargs console=ttyO0,115200n8 ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh
OMAP243X SDP # loady
## Ready for binary (ymodem) download to 0x80000000 at 115200 bps...
CSending: uImage-dtb.omap2430-sdp
Sending: 

Transfer complete
 - CRC mode, 3(SOH)/3620(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x0038903b = 3706939 Bytes
OMAP243X SDP # bootm
## Booting image at 80000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3706875 Bytes =  3.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
OK

Starting kernel ...

%% Start PM consolidated quick test (retention only)


%% Preparation

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.5.0-rc1-196864-g34b4182 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Mar 1 02:19:39 MST 2016
[    0.000000] CPU: ARMv6-compatible processor [4107b366] revision 6 (ARMv6TEJ), cr=00c5387d
[    0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI OMAP2430 SDP
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] cma: Reserved 16 MiB at 0x86800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 32256
[    0.000000] free_area_init_node: node 0, pgdat c0a049c0, node_mem_map c7cd1000
[    0.000000]   Normal zone: 288 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32256 pages, LIFO batch:7
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP2430
[    0.000000] 
[    0.000000] PERCPU: Embedded 14 pages/cpu @c7c6d000 s24808 r8192 d24344 u57344
[    0.000000] pcpu-alloc: s24808 r8192 d24344 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 31968
[    0.000000] Kernel command line: console=ttyO0,115200n8 ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 92352K/129024K available (6741K kernel code, 770K rwdata, 2280K rodata, 456K init, 8267K bss, 20288K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08d7714   (9022 kB)
[    0.000000]       .init : 0xc08d8000 - 0xc094a000   ( 456 kB)
[    0.000000]       .data : 0xc094a000 - 0xc0a0ab34   ( 771 kB)
[    0.000000]        .bss : 0xc0a0d000 - 0xc121fe20   (8268 kB)
[    0.000000] Running RCU self tests
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU lockdep checking is enabled.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 3.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/DPLL/MPU): 13.0/532/266 MHz
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[    0.000061] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000854] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
[    0.004577] Console: colour dummy device 80x30
[    0.004760] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.004791] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.004821] ... MAX_LOCK_DEPTH:          48
[    0.004852] ... MAX_LOCKDEP_KEYS:        8191
[    0.004882] ... CLASSHASH_SIZE:          4096
[    0.004913] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.004943] ... MAX_LOCKDEP_CHAINS:      65536
[    0.004974] ... CHAINHASH_SIZE:          32768
[    0.005004]  memory used by lock dependency info: 5167 kB
[    0.005035]  per task-struct memory footprint: 1536 bytes
[    0.005096] Calibrating delay loop... 262.96 BogoMIPS (lpj=1314816)
[    0.071044] pid_max: default: 32768 minimum: 301
[    0.072570] Security Framework initialized
[    0.073059] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.073120] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.086639] CPU: Testing write buffer coherency: ok
[    0.093566] missing device node for CPU 0
[    0.093627] CPU0: thread -1, cpu 0, socket -1, mpidr 4107b366
[    0.093902] Setting up static identity map for 0x80008280 - 0x800082f0
[    0.108703] Brought up 1 CPUs
[    0.108764] SMP: Total of 1 processors activated (262.96 BogoMIPS).
[    0.108795] CPU: All CPU(s) started in SVC mode.
[    0.122222] devtmpfs: initialized
[    0.316284] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
[    0.319335] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.326690] pinctrl core: initialized pinctrl subsystem
[    0.346771] NET: Registered protocol family 16
[    0.370269] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.492950] omap_hwmod: usb_otg_hs: _wait_target_ready failed: -16
[    0.493011] omap_hwmod: usb_otg_hs: cannot be enabled for reset (3)
[    0.520721] cpuidle: using governor menu
[    0.597137] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio
[    0.601898] OMAP GPIO hardware version 2.4
[    0.606170] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio
[    0.613708] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio
[    0.621307] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio
[    0.628753] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio
[    0.635314] omap-gpmc 6e000000.gpmc: GPMC revision 3.0
[    0.635894] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    0.652984] No ATAGs?
[    0.653198] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.653228] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.656402] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[    0.656463] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[    0.659484] OMAP DMA hardware revision 4.0
[    0.782135] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.798248] SCSI subsystem initialized
[    0.800506] libata version 3.00 loaded.
[    0.809356] omap_i2c 48070000.i2c: bus 0 rev3.3 at 100 kHz
[    0.815582] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz
[    0.817077] pps_core: LinuxPPS API ver. 1 registered
[    0.817108] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.817321] PTP clock support registered
[    0.832489] clocksource: Switched to clocksource 32k_counter
[    1.265136] VFS: Disk quotas dquot_6.6.0
[    1.265686] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.397460] NET: Registered protocol family 2
[    1.404815] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    1.404998] TCP bind hash table entries: 1024 (order: 3, 36864 bytes)
[    1.406433] TCP: Hash tables configured (established 1024 bind 1024)
[    1.407073] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.407867] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.411437] NET: Registered protocol family 1
[    1.417480] RPC: Registered named UNIX socket transport module.
[    1.417541] RPC: Registered udp transport module.
[    1.417572] RPC: Registered tcp transport module.
[    1.417602] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.425018] hw perfevents: enabled with armv6_1136 PMU driver, 3 counters available
[    1.445770] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.446624] audit: initializing netlink subsys (disabled)
[    1.447296] audit: type=2000 audit(1.440:1): initialized
[    1.473205] NFS: Registering the id_resolver key type
[    1.474670] Key type id_resolver registered
[    1.474731] Key type id_legacy registered
[    1.475433] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.497863] io scheduler noop registered
[    1.497985] io scheduler deadline registered
[    1.498138] io scheduler cfq registered (default)
[    1.508117] pinctrl-single 49002030.pinmux: 340 pins at pa fb002030 size 340
[    1.522003] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.545715] omap_uart 4806a000.serial: no wakeirq for uart0
[    1.545806] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]'
[    1.547363] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    2.375335] console [ttyO0] enabled
[    2.385070] omap_uart 4806c000.serial: no wakeirq for uart1
[    2.390991] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]'
[    2.401977] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    2.416564] omap_uart 4806e000.serial: no wakeirq for uart2
[    2.422668] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]'
[    2.433654] 4806e000.serial: ttyO2 at MMIO 0x4806e000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    2.588226] brd: module loaded
[    2.675384] loop: module loaded
[    2.720428] twl 1-0048: PIH (irq 23) chaining IRQs 274..282
[    2.727813] twl 1-0048: power (irq 279) chaining IRQs 282..289
[    2.912750] twl4030_gpio twl4030-gpio: gpio (irq 274) chaining IRQs 290..307
[    2.922882] gpiochip_find_base: found new base at 494
[    2.929748] gpiochip_add_data: registered GPIOs 494 to 511 on device: twl4030
[    2.962554] mtdoops: mtd device (mtddev=name/number) must be supplied
[    2.999450] smc91x 8000300.ethernet: GPIO lookup for consumer power
[    3.006256] smc91x 8000300.ethernet: using device tree for GPIO lookup
[    3.013275] of_get_named_gpiod_flags: can't parse 'power-gpios' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]'
[    3.024658] of_get_named_gpiod_flags: can't parse 'power-gpio' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]'
[    3.035949] smc91x 8000300.ethernet: using lookup tables for GPIO lookup
[    3.043579] smc91x 8000300.ethernet: lookup for GPIO power failed
[    3.050048] smc91x 8000300.ethernet: GPIO lookup for consumer reset
[    3.056793] smc91x 8000300.ethernet: using device tree for GPIO lookup
[    3.063812] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]'
[    3.075195] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]'
[    3.086456] smc91x 8000300.ethernet: using lookup tables for GPIO lookup
[    3.093658] smc91x 8000300.ethernet: lookup for GPIO reset failed
[    3.100494] smc91x 8000300.ethernet (unnamed net_device) (uninitialized): smc91x: IOADDR c88fa300 doesn't match configuration (0).
[    3.113037] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>
[    3.128387] smc91x 8000300.ethernet eth0: SMC91C94 (rev 9) at c88fa300 IRQ 261
[    3.136169] 
[    3.137817] smc91x 8000300.ethernet eth0: Ethernet addr: 10:03:31:33:16:8f
[    3.161804] mousedev: PS/2 mouse device common for all mice
[    3.167999] i2c /dev entries driver
[    3.184112] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
[    3.190490] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[    3.197570] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]'
[    3.207336] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]'
[    3.216979] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
[    3.224151] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed
[    3.230346] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
[    3.236816] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[    3.243804] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]'
[    3.253570] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]'
[    3.263183] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
[    3.270294] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed
[    3.333709] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd
[    3.340087] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
[    3.347167] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]'
[    3.356933] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]'
[    3.366607] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
[    3.373779] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed
[    3.379943] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp
[    3.386383] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
[    3.393402] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]'
[    3.403137] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]'
[    3.412780] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
[    3.419860] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed
[    3.463775] ledtrig-cpu: registered to indicate activity on CPUs
[    3.474822] oprofile: using arm/armv6
[    3.481170] Initializing XFRM netlink socket
[    3.487457] NET: Registered protocol family 10
[    3.505676] sit: IPv6 over IPv4 tunneling driver
[    3.518798] NET: Registered protocol family 17
[    3.523956] NET: Registered protocol family 15
[    3.530029] Key type dns_resolver registered
[    3.535369] SmartReflex Class3 initialized
[    3.570739] hctosys: unable to open rtc device (rtc0)
[    3.576385] sr_init: No PMIC hook to init smartreflex
[    3.582855] sr_init: platform driver register failed for SR
[    3.723785] VUSB1V5: disabling
[    3.730346] VUSB1V8: disabling
[    3.736938] VUSB3V1: disabling
[    3.754699] Waiting for root device /dev/mmcblk0p1...