Texas Instruments X-Loader 1.41 (Sep 1 2010 - 13:43:00) mmc read: Invalid size Starting OS Bootloader from MMC/SD1 ... U-Boot 1.1.4-gcebe815a-dirty (Aug 16 2010 - 10:34:46) Load address: 0x80e80000 DRAM: 512 MB Flash: 0 kB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: KS8851SNL Hit any key to stop autoboot: 3  2  1  0 3232448 bytes read ## Booting image at 80300000 ... Image Name: Linux-3.5.0-rc5-00010-g8cb8de5 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3232384 Bytes = 3.1 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.5.0-rc5-00010-g8cb8de5 (paul@nozomi) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Wed Jul 4 08:19:41 MDT 2012 [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4430 ES2.0 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0f9f000 s11520 r8192 d13056 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117346 [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 ro rootwait mem=463M console=ttyO2,115200n8 init=/linuxrc earlyprintk [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 456628k/456628k available, 17484k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xdd000000 - 0xff000000 ( 544 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdcf00000 ( 463 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc05bc5b8 (5842 kB) [ 0.000000] .init : 0xc05bd000 - 0xc0609d00 ( 308 kB) [ 0.000000] .data : 0xc060a000 - 0xc069d670 ( 590 kB) [ 0.000000] .bss : 0xc069d694 - 0xc0bf5d88 (5474 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:474 [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.116943] pid_max: default: 32768 minimum: 301 [ 0.117767] Security Framework initialized [ 0.118103] Mount-cache hash table entries: 512 [ 0.124664] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.125213] Setting up static identity map for 0x80406fd8 - 0x80407048 [ 0.125305] L310 cache controller enabled [ 0.125335] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.128021] CPU1: Booted secondary processor [ 0.195434] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.195495] CPU1: Unknown IPI message 0x1 [ 0.195648] Brought up 2 CPUs [ 0.195648] SMP: Total of 2 processors activated (4022.78 BogoMIPS). [ 0.212554] omap_hwmod: l3_instr: _wait_target_disable failed [ 0.219329] omap_hwmod: usb_host_fs: _wait_target_disable failed [ 0.225921] omap_hwmod: aess: _wait_target_disable failed [ 0.228637] omap_hwmod: sl2if: cannot be enabled for reset (3) [ 0.232635] omap_hwmod: mcpdm: cannot be enabled for reset (3) [ 0.237335] dummy: [ 0.238464] NET: Registered protocol family 16 [ 0.239135] GPMC revision 6.0 [ 0.239288] gpmc: irq-52 could not claim: err -22 [ 0.244903] OMAP GPIO hardware version 0.1 [ 0.252014] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.253570] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.253753] error setting wl12xx data: -38 [ 0.257232] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.257263] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.310089] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.310089] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.318817] OMAP DMA hardware revision 0.0 [ 0.347625] bio: create slab at 0 [ 0.349487] vwl1271: 1800 mV [ 0.352630] SCSI subsystem initialized [ 0.353851] usbcore: registered new interface driver usbfs [ 0.354125] usbcore: registered new interface driver hub [ 0.354431] usbcore: registered new device driver usb [ 0.367584] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 0.369934] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.370971] twl 1-0048: PIH (irq 39) chaining IRQs 352..372 [ 0.372558] VUSB: 3300 mV normal standby [ 0.373535] vdd_mpu: 500 <--> 1500 mV normal [ 0.374359] vdd_iva: 500 <--> 1500 mV normal [ 0.375396] vdd_core: 500 <--> 1500 mV normal [ 0.376586] V1V8: 1800 mV normal standby [ 0.377441] V2V1: 2100 mV normal standby [ 0.378479] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 0.379699] VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 0.381042] VCXIO: 1800 mV normal standby [ 0.381103] VCXIO: supplied by V2V1 [ 0.382995] VDAC: 1800 mV normal standby [ 0.383056] VDAC: supplied by V2V1 [ 0.384552] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 0.385711] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 0.386779] CLK32KG: [ 0.387664] VANA: 2100 mV normal standby [ 0.398712] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 0.414245] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz [ 0.429870] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 0.433990] Switching to clocksource 32k_counter [ 0.489318] NET: Registered protocol family 2 [ 0.489898] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.491149] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.491638] TCP bind hash table entries: 16384 (order: 7, 589824 bytes) [ 0.495574] TCP: Hash tables configured (established 16384 bind 16384) [ 0.495697] TCP: reno registered [ 0.495727] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.495880] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.496520] NET: Registered protocol family 1 [ 0.497619] RPC: Registered named UNIX socket transport module. [ 0.497650] RPC: Registered udp transport module. [ 0.497650] RPC: Registered tcp transport module. [ 0.497650] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.498260] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.630523] VFS: Disk quotas dquot_6.5.2 [ 0.630737] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.631683] NFS: Registering the id_resolver key type [ 0.631988] Key type id_resolver registered [ 0.632598] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.633239] msgmni has been set to 891 [ 0.635467] io scheduler noop registered [ 0.635498] io scheduler deadline registered [ 0.635620] io scheduler cfq registered (default) [ 0.637207] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.640655] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 0.641601] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 0.642272] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 1.360351] console [ttyO2] enabled [ 1.364837] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 1.389434] brd: module loaded [ 1.402252] loop: module loaded [ 1.408905] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.416229] OneNAND driver initializing [ 1.426971] usbcore: registered new interface driver asix [ 1.432891] usbcore: registered new interface driver cdc_ether [ 1.439422] usbcore: registered new interface driver net1080 [ 1.445678] usbcore: registered new interface driver cdc_subset [ 1.452301] usbcore: registered new interface driver zaurus [ 1.458465] usbcore: registered new interface driver cdc_ncm [ 1.465423] usbcore: registered new interface driver cdc_wdm [ 1.471405] Initializing USB Mass Storage driver... [ 1.476806] usbcore: registered new interface driver usb-storage [ 1.483154] USB Mass Storage support registered. [ 1.488494] usbcore: registered new interface driver libusual [ 1.494842] usbcore: registered new interface driver usbtest [ 1.500854] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma) [ 1.508911] mousedev: PS/2 mouse device common for all mice [ 1.517150] twl_rtc twl_rtc: Power up reset detected. [ 1.523193] twl_rtc twl_rtc: Enabling TWL-RTC [ 1.530822] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 1.537445] genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 363 [ 1.545806] twl_rtc twl_rtc: IRQ is not free. [ 1.552307] twl_rtc: probe of twl_rtc failed with error -22 [ 1.558380] i2c /dev entries driver [ 1.564056] Driver for 1-wire Dallas network protocol. [ 1.571350] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 1.580444] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk [ 1.645477] omap_hsmmc omap_hsmmc.4: Failed to get debounce clk [ 1.764129] usbcore: registered new interface driver usbhid [ 1.769958] usbhid: USB HID core driver [ 1.774017] oprofile: hardware counters not available [ 1.779327] oprofile: using timer interrupt. [ 1.784393] TCP: cubic registered [ 1.787994] Initializing XFRM netlink socket [ 1.792572] NET: Registered protocol family 17 [ 1.797332] NET: Registered protocol family 15 [ 1.802246] Key type dns_resolver registered [ 1.806854] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 1.820037] omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0). [ 1.828308] omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0). [ 1.837860] Power Management for TI OMAP4. [ 1.842315] ThumbEE CPU extension supported. [ 1.864349] clock: disabling unused clocks to save power [ 1.872985] VANA: incomplete constraints, leaving on [ 1.879547] VDAC: incomplete constraints, leaving on [ 1.886413] /home/paul/linux/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.897003] Waiting for root device /dev/mmcblk0p2... [ 1.933776] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.942382] mmc0: new SD card at address aaaa [ 1.948577] mmcblk0: mmc0:aaaa SD02G 1.89 GiB [ 1.956298] mmcblk0: p1 p2 [ 2.009307] EXT3-fs (mmcblk0p2): recovery required on readonly filesystem [ 2.016479] EXT3-fs (mmcblk0p2): write access will be enabled during recovery [ 4.224792] kjournald starting. Commit interval 5 seconds [ 4.386840] EXT3-fs (mmcblk0p2): recovery complete [ 4.391906] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode [ 4.399383] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 4.406890] Freeing init memory: 304K [ 4.413269] Failed to execute /linuxrc. Attempting defaults... modprobe: FATAL: Could not load /lib/modules/3.5.0-rc5-00010-g8cb8de5/modules.dep: No such file or directory INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Activating swap...done. [ 6.221771] EXT3-fs (mmcblk0p2): using internal journal Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux 2.19.1 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...done. Cleaning up temporary files.... Setting kernel variables ...done. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Debian GNU/Linux wheezy/sid armel ttyO2 armel login: