Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  2  1  0 BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage.cmt3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################### done Bytes transferred = 3232032 (315120 hex) ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-3.5.0-rc5-00002-gd7a0b51 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3231968 Bytes = 3.1 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.5.0-rc5-00002-gd7a0b51 (paul@nozomi) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Wed Jul 4 06:57:38 MDT 2012 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: Compulab CM-T3517 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0dfc000 s11520 r8192 d13056 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO2,115200 earlyprintk root=/dev/nfs nfsroot=192.168.57.1:/srv/nfs4/rootfs2 nfsrootdebug ip=dhcp init=/bin/sh [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 246564k/246564k available, 15580k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc05bc508 (5842 kB) [ 0.000000] .init : 0xc05bd000 - 0xc0609d00 ( 308 kB) [ 0.000000] .data : 0xc060a000 - 0xc069cff0 ( 588 kB) [ 0.000000] .bss : 0xc069d014 - 0xc0bf5708 (5474 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:474 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.078063] pid_max: default: 32768 minimum: 301 [ 0.078948] Security Framework initialized [ 0.079254] Mount-cache hash table entries: 512 [ 0.086547] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.086669] Setting up static identity map for 0x80406d98 - 0x80406e08 [ 0.088958] Brought up 1 CPUs [ 0.088989] SMP: Total of 1 processors activated (594.49 BogoMIPS). [ 0.106445] omap_hwmod: am35x_otg_hs: cannot be enabled for reset (3) [ 0.120269] omap_hwmod: uart4: softreset failed (waited 10000 usec) [ 0.128967] dummy: [ 0.131774] NET: Registered protocol family 16 [ 0.133728] GPMC revision 5.0 [ 0.134033] gpmc: irq-20 could not claim: err -22 [ 0.147064] OMAP GPIO hardware version 2.5 [ 0.164703] In-band Error seen by USB_OTG at address 0 [ 0.164733] ------------[ cut here ]------------ [ 0.164794] WARNING: at /home/paul/linux/arch/arm/mach-omap2/omap_l3_smx.c:162 omap3_l3_app_irq+0xe0/0x120() [ 0.164886] [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_common+0x4c/0x64) [ 0.164916] [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_null+0x18/0x1c) [ 0.164947] [] (warn_slowpath_null+0x18/0x1c) from [] (omap3_l3_app_irq+0xe0/0x120) [ 0.164978] [] (omap3_l3_app_irq+0xe0/0x120) from [] (handle_irq_event_percpu+0x70/0x218) [ 0.165008] [] (handle_irq_event_percpu+0x70/0x218) from [] (handle_irq_event+0x3c/0x5c) [ 0.165039] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0xe8/0x104) [ 0.165069] [] (handle_level_irq+0xe8/0x104) from [] (generic_handle_irq+0x20/0x30) [ 0.165100] [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x78/0xb8) [ 0.165130] [] (handle_IRQ+0x78/0xb8) from [] (omap3_intc_handle_irq+0x64/0x78) [ 0.165191] [] (omap3_intc_handle_irq+0x64/0x78) from [] (__irq_svc+0x44/0x60) [ 0.165191] Exception stack(0xcf82de38 to 0xcf82de80) [ 0.165222] de20: 00000001 00000004 [ 0.165252] de40: 00000000 cf82b3c0 60000013 c060c994 0000000a 00000000 c060c994 60000013 [ 0.165283] de60: c060c974 00000000 0c038000 cf82de80 c0082818 c0402184 20000013 ffffffff [ 0.165313] [] (__irq_svc+0x44/0x60) from [] (_raw_spin_unlock_irqrestore+0x40/0x44) [ 0.165344] [] (_raw_spin_unlock_irqrestore+0x40/0x44) from [] (__setup_irq+0x2e4/0x3e0) [ 0.165374] [] (__setup_irq+0x2e4/0x3e0) from [] (request_threaded_irq+0xdc/0x12c) [ 0.165405] [] (request_threaded_irq+0xdc/0x12c) from [] (omap3_l3_probe+0x108/0x164) [ 0.165435] [] (omap3_l3_probe+0x108/0x164) from [] (platform_drv_probe+0x14/0x18) [ 0.165496] [] (platform_drv_probe+0x14/0x18) from [] (driver_probe_device+0xcc/0x1fc) [ 0.165527] [] (driver_probe_device+0xcc/0x1fc) from [] (__driver_attach+0x68/0x8c) [ 0.165557] [] (__driver_attach+0x68/0x8c) from [] (bus_for_each_dev+0x48/0x74) [ 0.165588] [] (bus_for_each_dev+0x48/0x74) from [] (bus_add_driver+0x9c/0x228) [ 0.165618] [] (bus_add_driver+0x9c/0x228) from [] (driver_register+0x9c/0x120) [ 0.165618] [] (driver_register+0x9c/0x120) from [] (platform_driver_probe+0x18/0x8c) [ 0.165649] [] (platform_driver_probe+0x18/0x8c) from [] (do_one_initcall+0x94/0x168) [ 0.165679] [] (do_one_initcall+0x94/0x168) from [] (kernel_init+0xf8/0x1c4) [ 0.165710] [] (kernel_init+0xf8/0x1c4) from [] (kernel_thread_exit+0x0/0x8) [ 0.166198] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.167968] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.175354] _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx [ 0.175567] omap_uart.3: failed to claim resource 58 [ 0.175628] omap_device: omap_uart: build failed (-16) [ 0.175628] ------------[ cut here ]------------ [ 0.175689] WARNING: at /home/paul/linux/arch/arm/mach-omap2/serial.c:317 omap_serial_init_port+0x144/0x220() [ 0.175689] Could not build omap_device for omap_uart: uart4. [ 0.175781] [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_common+0x4c/0x64) [ 0.175811] [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_fmt+0x2c/0x3c) [ 0.175842] [] (warn_slowpath_fmt+0x2c/0x3c) from [] (omap_serial_init_port+0x144/0x220) [ 0.175872] [] (omap_serial_init_port+0x144/0x220) from [] (omap_serial_board_init+0x148/0x184) [ 0.175933] [] (omap_serial_board_init+0x148/0x184) from [] (cm_t3517_init+0x14/0x6c) [ 0.175964] [] (cm_t3517_init+0x14/0x6c) from [] (customize_machine+0x1c/0x28) [ 0.175994] [] (customize_machine+0x1c/0x28) from [] (do_one_initcall+0x94/0x168) [ 0.176025] [] (do_one_initcall+0x94/0x168) from [] (kernel_init+0xf8/0x1c4) [ 0.176055] [] (kernel_init+0xf8/0x1c4) from [] (kernel_thread_exit+0x0/0x8) [ 0.176086] ---[ end trace 1b75b31a2719ed1d ]--- [ 0.186126] Reprogramming SDRC clock to 332000000 Hz [ 0.186157] dpll3_m2_clk rate change failed: -22 [ 0.187255] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.206542] omap-mcbsp.2: alias fck already exists [ 0.207550] omap-mcbsp.3: alias fck already exists [ 0.213653] OMAP DMA hardware revision 4.0 [ 0.297668] bio: create slab at 0 [ 0.308807] SCSI subsystem initialized [ 0.312194] usbcore: registered new interface driver usbfs [ 0.313507] usbcore: registered new interface driver hub [ 0.314636] usbcore: registered new device driver usb [ 0.327209] Switching to clocksource 32k_counter [ 0.474090] NET: Registered protocol family 2 [ 0.475006] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.478149] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.478668] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.483367] TCP: Hash tables configured (established 8192 bind 8192) [ 0.483489] TCP: reno registered [ 0.483520] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.483856] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.485107] NET: Registered protocol family 1 [ 0.486999] RPC: Registered named UNIX socket transport module. [ 0.487030] RPC: Registered udp transport module. [ 0.487060] RPC: Registered tcp transport module. [ 0.487060] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.488311] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.687988] VFS: Disk quotas dquot_6.5.2 [ 0.688446] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.690460] NFS: Registering the id_resolver key type [ 0.691101] Key type id_resolver registered [ 0.692840] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.694274] msgmni has been set to 481 [ 0.700347] io scheduler noop registered [ 0.700378] io scheduler deadline registered [ 0.700714] io scheduler cfq registered (default) [ 0.705017] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.714080] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 0.716461] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 0.718322] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 1.706634] console [ttyO2] enabled [ 1.755676] brd: module loaded [ 1.785430] loop: module loaded [ 1.797210] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.804779] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit), page size: 2048, OOB size: 64 [ 1.816833] Creating 5 MTD partitions on "omap2-nand.0": [ 1.822479] 0x000000000000-0x000000080000 : "xloader" [ 1.837707] 0x000000080000-0x000000260000 : "uboot" [ 1.850311] 0x000000260000-0x0000002a0000 : "uboot environment" [ 1.862884] 0x0000002a0000-0x0000006a0000 : "linux" [ 1.877380] 0x0000006a0000-0x000020000000 : "rootfs" [ 2.329681] OneNAND driver initializing [ 2.352142] usbcore: registered new interface driver asix [ 2.358489] usbcore: registered new interface driver cdc_ether [ 2.365783] usbcore: registered new interface driver net1080 [ 2.372589] usbcore: registered new interface driver cdc_subset [ 2.379669] usbcore: registered new interface driver zaurus [ 2.386383] usbcore: registered new interface driver cdc_ncm [ 2.395355] usbcore: registered new interface driver cdc_wdm [ 2.401489] Initializing USB Mass Storage driver... [ 2.407470] usbcore: registered new interface driver usb-storage [ 2.413970] USB Mass Storage support registered. [ 2.420379] usbcore: registered new interface driver libusual [ 2.427368] usbcore: registered new interface driver usbtest [ 2.433471] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma) [ 2.444213] mousedev: PS/2 mouse device common for all mice [ 2.456268] i2c /dev entries driver [ 2.460784] Driver for 1-wire Dallas network protocol. [ 2.470672] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 2.484954] usbcore: registered new interface driver usbhid [ 2.490814] usbhid: USB HID core driver [ 2.495178] oprofile: hardware counters not available [ 2.500549] oprofile: using timer interrupt. [ 2.506164] TCP: cubic registered [ 2.509765] Initializing XFRM netlink socket [ 2.514434] NET: Registered protocol family 17 [ 2.519287] NET: Registered protocol family 15 [ 2.524536] Key type dns_resolver registered [ 2.529235] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 2.548034] voltdm_scale: No voltage scale API registered for vdd_mpu_iva [ 2.555297] voltdm_scale: No voltage scale API registered for vdd_core [ 2.562438] PM: no software I/O chain control; some wakeups may be lost [ 2.569915] ThumbEE CPU extension supported. [ 2.611480] clock: disabling unused clocks to save power [ 2.625244] /home/paul/linux/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)