$ ÿNOLO X-Loader (v1.1.16, Oct 31 2008) Secondary image size 99036 Booting secondary Nokia OMAP Loader v1.1.16 (Oct 31 2008) running on Nokia N800 F5 (RX-34) Clocks: Core: 658 MHz L3: 109 MHz L4: 109 MHz MPU: 329 MHz DSP: 219 MHz IVA: 109 MHz I2C v3.4 Menelaus v2.2 found Vilma v1.5 found Betty v2.1 found Reset reason: pwr_key System DMA v2.0 OneNAND blocks unlocked in 30264 us Flash id: ec4811 Partition table successfully read McSPI v1.4 RFBI version 1.0 Detecting LCD panel lph8923 Panel ID: 838f48 URAL panel detected Detected LCD panel: ls041y3 S1D13745 Hailstorm detected FB memory blanking took 242 ms (3089 kB/s) Logo drawn in 24 ms (1218 kB/s) Über-cool backlight fade-in took 101 ms Initializing USB USB host detected Entering USB loop SETUP: RD STD DEVICE GET_DESCRIPTOR DEVICE (value 00, index 0000, length 64 bytes) SETUP: WR STD DEVICE SET_ADDRESS value 0011 index 0000 length 0000 SETUP: RD STD DEVICE GET_DESCRIPTOR DEVICE (value 00, index 0000, length 18 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR CONFIGURATION (value 00, index 0000, length 9 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR CONFIGURATION (value 00, index 0000, length 94 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 00, index 0000, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 02, index 0409, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 01, index 0409, length 255 bytes) SETUP: WR STD DEVICE SET_CONFIGURATION value 0001 index 0000 length 0000 SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 03, index 0409, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: WR STD INTERFACE SET_INTERFACE value 0001 index 0002 length 0000 Flashing interface selected SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 Flashing mode entered SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 SETUP: RD VND DEVICE req 04 value 0000 index 0000 length 0200 SETUP: RD VND DEVICE req 03 value 0000 index 0000 length 0004 SETUP: WR VND DEVICE req 12 value 0000 index 0000 length 0012 SETUP: RD VND DEVICE req 14 value 0000 index 0000 length 0200 SETUP: WR VND DEVICE req 42 value 0000 index 0000 length 001b Receiving kernel (length 1698176) Image successfully received SETUP: WR VND DEVICE req 82 value 0000 index 0000 length 0000 SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 Boot requested [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.10.0-rc4-00003-g563ce4d (paul@nozomi) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 Sun Jun 9 02:14:59 MDT 2013 [ 0.000000] CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Nokia N800 [ 0.000000] Ignoring unrecognised tag 0x414f4d50 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at 87000000 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c035040c, node_mem_map c086f000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] OMAP2420 [ 0.000000] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait console=ttyO2,115200 earlyprintk debug init=/bin/bash ignore_loglevel [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 104844k/104844k available, 26228k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc02fb004 (3021 kB) [ 0.000000] .init : 0xc02fc000 - 0xc031e014 ( 137 kB) [ 0.000000] .data : 0xc0320000 - 0xc0351060 ( 197 kB) [ 0.000000] .bss : 0xc0351060 - 0xc086e9c8 (5239 kB) [ 0.000000] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 2.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] omap2_sync32k_clocksource_init: failed to get counter_32k resource [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.130000] Calibrating delay loop... 217.49 BogoMIPS (lpj=1087488) [ 0.140000] pid_max: default: 32768 minimum: 301 [ 0.140000] Security Framework initialized [ 0.140000] Mount-cache hash table entries: 512 [ 0.140000] CPU: Testing write buffer coherency: ok [ 0.150000] Setting up static identity map for 0xc02180d0 - 0xc021812c [ 0.160000] devtmpfs: initialized [ 0.170000] ttyO2 used as console in debug mode: uart2 clocks will not be gated [ 0.210000] pinctrl core: initialized pinctrl subsystem [ 0.220000] regulator-dummy: no parameters [ 0.240000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.250000] omap-gpmc omap-gpmc: GPMC revision 2.0 [ 0.270000] omap_gpio omap_gpio.0: Could not get gpio dbck [ 0.270000] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.270000] OMAP GPIO hardware version 1.8 [ 0.270000] omap_gpio omap_gpio.1: Could not get gpio dbck [ 0.280000] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.280000] omap_gpio omap_gpio.2: Could not get gpio dbck [ 0.280000] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.290000] omap_gpio omap_gpio.3: Could not get gpio dbck [ 0.290000] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.300000] omap_mux_init: Add partition: #1: core, flags: b [ 0.360000] mmci-omap.0: alias fck already exists [ 0.360000] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.360000] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.400000] OMAP DMA hardware revision 2.0 [ 0.480000] bio: create slab at 0 [ 0.730000] omap-dma-engine omap-dma-engine: OMAP DMA engine driver [ 0.740000] SCSI subsystem initialized [ 0.750000] omap_i2c omap_i2c.1: bus 1 rev3.3 at 400 kHz [ 0.760000] omap_i2c omap_i2c.2: bus 2 rev3.3 at 400 kHz [ 0.950000] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.950000] CPU PMU: probing PMU on CPU 0 [ 0.950000] hw perfevents: enabled with v6 PMU driver, 3 counters available [ 0.980000] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.980000] msgmni has been set to 236 [ 0.990000] io scheduler noop registered [ 0.990000] io scheduler cfq registered (default) [ 0.990000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.010000] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88) is a OMAP UART0 [ 1.020000] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89) is a OMAP UART1 [ 1.030000] omap_uart.2: ttyO2 at MMIO 0x4806e000 (irq = 90) is a OMAP UART2 [ 1.530000] console [ttyO2] enabled [ 1.550000] omap_rng omap_rng: OMAP Random Number Generator ver. 40 [ 1.560000] Menelaus rev 2.2 [ 1.600000] i2c /dev entries driver [ 1.630000] retu-mfd 3-0001: Retu & Vilma v1.5 found [ 1.650000] omap_wdt: OMAP Watchdog Timer Rev 0x11: initial timeout 60 sec [ 1.660000] omap-dma-engine omap-dma-engine: allocating channel for 61 [ 1.670000] omap-dma-engine omap-dma-engine: allocating channel for 62 [ 1.790000] mmci-omap mmci-omap.0: command timeout (CMD52) [ 1.790000] mmci-omap mmci-omap.0: command timeout (CMD52) [ 1.830000] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.830000] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.840000] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.850000] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.870000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2 [ 1.880000] mux: Failed to setup hwmod io irq -22 [ 1.900000] Power Management for OMAP2 initializing [ 1.900000] PRCM revision 1.0 [ 1.920000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.930000] Waiting for root device /dev/mmcblk0p1... [ 2.470000] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.470000] mmc0: new SDHC card at address 1234 [ 2.490000] mmcblk0: mmc0:1234 SA04G 3.68 GiB [ 2.510000] mmcblk0: p1 [ 2.520000] mmci-omap mmci-omap.0: command timeout (CMD52) [ 2.520000] mmci-omap mmci-omap.0: command timeout (CMD52) [ 2.540000] mmci-omap mmci-omap.0: command timeout (CMD8) [ 2.540000] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.550000] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.560000] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.560000] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.570000] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.580000] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.580000] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.590000] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.610000] mmci-omap mmci-omap.0: command timeout (CMD1) [ 3.140000] kjournald starting. Commit interval 5 seconds [ 3.370000] EXT3-fs (mmcblk0p1): using internal journal [ 3.390000] EXT3-fs (mmcblk0p1): recovery complete [ 3.390000] EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode [ 3.400000] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.410000] devtmpfs: mounted [ 3.420000] Freeing unused kernel memory: 136K (c02fc000 - c031e000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#