U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete - CRC mode, 6(SOH)/4143(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0040bd9a = 4242842 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4242778 Bytes = 4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.13.0-rc1-36053-g5bb1b05 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Dec 9 03:11:33 MST 2013 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c0873500, node_mem_map c0de3000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c15fc000 s13952 r8192 d14720 u36864 [ 0.000000] pcpu-alloc: s13952 r8192 d14720 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1007756K/1047552K available (5471K kernel code, 658K rwdata, 2124K rodata, 385K init, 5527K bss, 39796K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0772f4c (7596 kB) [ 0.000000] .init : 0xc0773000 - 0xc07d3680 ( 386 kB) [ 0.000000] .data : 0xc07d4000 - 0xc0878940 ( 659 kB) [ 0.000000] .bss : 0xc0878940 - 0xc0dde770 (5528 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] smp_twd: clock not found -2 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] Calibrating local timer... 347.47MHz. [ 0.059844] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.149200] pid_max: default: 32768 minimum: 301 [ 0.149780] Security Framework initialized [ 0.149932] Mount-cache hash table entries: 512 [ 0.161590] CPU: Testing write buffer coherency: ok [ 0.163055] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.163116] Setting up static identity map for 0x8052fc10 - 0x8052fc80 [ 0.163238] L310 cache controller enabled [ 0.163269] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB [ 0.168304] CPU1: Booted secondary processor [ 0.198822] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.199432] Brought up 2 CPUs [ 0.199462] SMP: Total of 2 processors activated. [ 0.199493] CPU: All CPU(s) started in SVC mode. [ 0.202209] devtmpfs: initialized [ 0.210906] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.293029] pinctrl core: initialized pinctrl subsystem [ 0.296234] regulator-dummy: no parameters [ 0.299163] NET: Registered protocol family 16 [ 0.305786] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.381591] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.382690] OMAP GPIO hardware version 0.1 [ 0.384460] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.386566] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.388702] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.390808] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.393005] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.394744] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.419769] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.420318] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.421539] No ATAGs? [ 0.421569] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.421600] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.425048] OMAP DMA hardware revision 0.0 [ 0.471191] bio: create slab at 0 [ 0.474060] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.474090] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.529022] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.529998] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.530731] VDD_ETH: 3300 mV [ 0.538055] SCSI subsystem initialized [ 0.539581] usbcore: registered new interface driver usbfs [ 0.539947] usbcore: registered new interface driver hub [ 0.540374] usbcore: registered new device driver usb [ 0.545288] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.546325] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.547943] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.548797] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.554962] Switched to clocksource 32k_counter [ 0.679870] NET: Registered protocol family 2 [ 0.681671] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.681945] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.684631] TCP: Hash tables configured (established 8192 bind 8192) [ 0.684936] TCP: reno registered [ 0.684967] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.685333] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.686645] NET: Registered protocol family 1 [ 0.688201] RPC: Registered named UNIX socket transport module. [ 0.688232] RPC: Registered udp transport module. [ 0.688232] RPC: Registered tcp transport module. [ 0.688232] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.861663] bounce pool size: 64 pages [ 0.862670] VFS: Disk quotas dquot_6.5.2 [ 0.862884] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.865356] NFS: Registering the id_resolver key type [ 0.865692] Key type id_resolver registered [ 0.865722] Key type id_legacy registered [ 0.865814] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.866363] msgmni has been set to 1474 [ 0.869384] io scheduler noop registered [ 0.869384] io scheduler deadline registered [ 0.869476] io scheduler cfq registered (default) [ 0.874572] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.875183] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.878448] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.884033] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.885040] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.886627] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 0.887023] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.887969] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 0.888336] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.702667] console [ttyO2] enabled [ 1.707336] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.717132] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.750701] brd: module loaded [ 1.767578] loop: module loaded [ 1.773223] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.783447] twl 0-0048: PIH (irq 39) nested IRQs [ 1.791564] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.798950] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.806335] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.813507] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.820129] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.826782] VUSIM: 1200 <--> 2900 mV [ 1.832183] VDAC: 1800 mV [ 1.836364] VANA: 2100 mV [ 1.840911] VCXIO: 1800 mV [ 1.845245] VUSB: 3300 mV [ 1.849914] V1V8: 1800 mV [ 1.854461] V2V1: 2100 mV [ 1.864868] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.875305] omap-dma-engine 4a056000.dma-controller: allocating channel for 36 [ 1.882965] omap-dma-engine 4a056000.dma-controller: allocating channel for 35 [ 1.896728] ks8851 spi1.0: message enable is 0 [ 1.907775] ks8851 spi1.0 eth0: revision 1, MAC 9a:3c:81:aa:b0:6b, IRQ 331, no EEPROM [ 1.919464] usbcore: registered new interface driver asix [ 1.925537] usbcore: registered new interface driver ax88179_178a [ 1.932250] usbcore: registered new interface driver cdc_ether [ 1.938751] usbcore: registered new interface driver r815x [ 1.944885] usbcore: registered new interface driver smsc95xx [ 1.951263] usbcore: registered new interface driver net1080 [ 1.957580] usbcore: registered new interface driver cdc_subset [ 1.964111] usbcore: registered new interface driver zaurus [ 1.970367] usbcore: registered new interface driver cdc_ncm [ 1.977783] usbcore: registered new interface driver cdc_wdm [ 1.984069] usbcore: registered new interface driver usb-storage [ 1.990753] usbcore: registered new interface driver usbtest [ 1.998809] mousedev: PS/2 mouse device common for all mice [ 2.009399] twl_rtc rtc.5: Power up reset detected. [ 2.015716] twl_rtc rtc.5: Enabling TWL-RTC [ 2.024414] twl_rtc rtc.5: rtc core: registered rtc.5 as rtc0 [ 2.031005] i2c /dev entries driver [ 2.038787] Driver for 1-wire Dallas network protocol. [ 2.045776] ti-soc-thermal 4a002260.bandgap: failed to request fclock reference [ 2.053497] ti-soc-thermal: probe of 4a002260.bandgap failed with error -2 [ 2.063659] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.073150] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.082336] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.091827] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.099487] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.107635] omap_hsmmc 4809c000.mmc: dummy supplies not allowed [ 2.113891] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.155059] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.164215] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.173553] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 2.181182] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.188873] omap_hsmmc 480d5000.mmc: dummy supplies not allowed [ 2.193054] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.195281] mmc0: new high speed SDHC card at address 0007 [ 2.209350] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 2.210906] isa bounce pool size: 16 pages [ 2.211395] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.224456] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 2.228851] mmcblk0: p1 p2 [ 2.234741] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 2.243347] ledtrig-cpu: registered to indicate activity on CPUs [ 2.250732] usbcore: registered new interface driver usbhid [ 2.256622] usbhid: USB HID core driver [ 2.262420] oprofile: no performance counters [ 2.268432] oprofile: using timer interrupt. [ 2.273529] TCP: cubic registered [ 2.277099] Initializing XFRM netlink socket [ 2.281677] NET: Registered protocol family 17 [ 2.286437] NET: Registered protocol family 15 [ 2.291381] Key type dns_resolver registered [ 2.297332] Power Management for TI OMAP4+ devices. [ 2.302520] Power Management for TI OMAP4. [ 2.306854] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.314056] ThumbEE CPU extension supported. [ 2.322662] VUSB: disabling [ 2.326354] VANA: disabling [ 2.330078] VDAC: disabling [ 2.335754] VAUX1_6030: disabling [ 2.343902] twl_rtc rtc.5: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.352783] omap_uart 48020000.serial: no wakeirq for uart2 [ 2.364349] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.377197] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 2.414947] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.426635] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 6.358184] EXT4-fs (mmcblk0p2): recovery complete [ 6.378326] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.378326] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 6.404144] devtmpfs: mounted [ 6.407775] Freeing unused kernel memory: 384K (c0773000 - c07d3000) [ 6.960815] random: init urandom read with 92 bits of entropy available [ 6.988891] init: Failed to create pty - disabling logging for job [ 6.999114] init: Temporary process spawn error: No space left on device [ 7.069763] init: Failed to create pty - disabling logging for job [ 7.076324] init: Temporary process spawn error: No space left on device [ 7.109374] init: Failed to create pty - disabling logging for job [ 7.117858] init: Temporary process spawn error: No space left on device [ 7.128265] init: Failed to create pty - disabling logging for job [ 7.136352] init: Temporary process spawn error: No space left on device [ 7.297058] init: ureadahead main process (788) terminated with status 5 [ 7.353179] omap_uart 48020000.serial: no wakeirq for uart2 [ 7.732910] init: Failed to create pty - disabling logging for job [ 7.741241] init: Temporary process spawn error: No space left on device [ 7.787292] init: Failed to create pty - disabling logging for job [ 7.795166] init: Temporary process spawn error: No space left on device [ 7.838012] random: nonblocking pool is initialized [ 7.925354] init: Failed to create pty - disabling logging for job [ 7.932281] init: Temporary process spawn error: No space left on device [ 8.940124] udevd[846]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk0p2: clean, 177198/963584 files, 2986034/7708672 blocks [ 11.868408] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 12.066467] init: udev-fallback-graphics main process (1536) terminated with status 1 [ 12.306701] init: plymouth main process (789) killed by SEGV signal [ 12.324676] init: plymouth-splash main process (1557) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.702850] init: plymouth-log main process (1591) terminated with status 1 [ 12.774780] init: failsafe main process (1593) killed by TERM signal [ 13.581359] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 13.821350] init: plymouth-upstart-bridge main process (1635) terminated with status 1 [ 14.232666] omap_uart 48020000.serial: no wakeirq for uart2 speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 15.457672] init: bluetooth main process (1660) terminated with status 1 [ 15.465026] init: bluetooth main process ended, respawning [ 15.579833] init: hybrid-gfx main process (1705) terminated with status 1 [ 15.730865] init: alsa-restore main process (1686) terminated with status 19 FATAL: Could not load /lib/modules/3.13.0-rc1-36053-g5bb1b05/modules.dep: No such file or directory [ 16.125396] init: bluetooth main process (1772) terminated with status 1 [ 16.125396] init: bluetooth main process ended, respawning [ 16.326019] init: bluetooth main process (1811) terminated with status 1 [ 16.332916] init: bluetooth main process ended, respawning [ 16.601226] init: bluetooth main process (1843) terminated with status 1 [ 16.608428] init: bluetooth main process ended, respawning [ 16.798583] init: bluetooth main process (1866) terminated with status 1 [ 16.806365] init: bluetooth main process ended, respawning [ 16.998199] init: bluetooth main process (1890) terminated with status 1 [ 17.006683] init: bluetooth main process ended, respawning [ 17.534393] init: bluetooth main process (1913) terminated with status 1 [ 17.542327] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 17.773162] init: bluetooth main process (1937) terminated with status 1 [ 17.783447] init: bluetooth main process ended, respawning [ 17.969512] init: bluetooth main process (1962) terminated with status 1 [ 17.981109] init: bluetooth main process ended, respawning