U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  2  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete m - CRC mode, 8(SOH)/4230(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00421ae7 = 4332263 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4332199 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.31-rt28-54440-g42a2378 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Feb 22 17:11:39 MST 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c0894b40, node_mem_map edff2000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edfb9000 s14464 r8192 d14208 u36864 [ 0.000000] pcpu-alloc: s14464 r8192 d14208 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1007552K/1047552K available (5590K kernel code, 656K rwdata, 2136K rodata, 386K init, 5518K bss, 40000K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0793c00 (7727 kB) [ 0.000000] .init : 0xc0794000 - 0xc07f4880 ( 387 kB) [ 0.000000] .data : 0xc07f6000 - 0xc089a160 ( 657 kB) [ 0.000000] .bss : 0xc089a160 - 0xc0dfdc70 (5519 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000183] smp_twd: clock not found -2 [ 0.002014] Console: colour dummy device 80x30 [ 0.002105] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002105] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002136] ... MAX_LOCK_DEPTH: 48 [ 0.002136] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002136] ... CLASSHASH_SIZE: 4096 [ 0.002136] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.002166] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.002166] ... CHAINHASH_SIZE: 16384 [ 0.002166] memory used by lock dependency info: 3695 kB [ 0.002166] per task-struct memory footprint: 1152 bytes [ 0.002258] Calibrating local timer... 347.66MHz. [ 0.058776] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.148132] pid_max: default: 32768 minimum: 301 [ 0.148681] Security Framework initialized [ 0.148864] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.148895] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.180816] CPU: Testing write buffer coherency: ok [ 0.182281] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.182342] Setting up static identity map for 0x8054ce50 - 0x8054cec0 [ 0.182464] L310 cache controller enabled [ 0.182464] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB [ 0.187683] CPU1: Booted secondary processor [ 0.217681] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.218322] Brought up 2 CPUs [ 0.218322] SMP: Total of 2 processors activated (2768.89 BogoMIPS). [ 0.218353] CPU: All CPU(s) started in SVC mode. [ 0.221038] devtmpfs: initialized [ 0.230712] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.234527] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.238098] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.395507] pinctrl core: initialized pinctrl subsystem [ 0.399261] regulator-dummy: no parameters [ 0.402069] NET: Registered protocol family 16 [ 0.408996] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.485839] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.486999] OMAP GPIO hardware version 0.1 [ 0.488861] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.491088] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.493286] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.495513] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.497894] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.499755] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.527099] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.527740] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.529113] No ATAGs? [ 0.529174] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.529174] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.532775] OMAP DMA hardware revision 0.0 [ 0.581817] bio: create slab at 0 [ 0.584899] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.584930] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.646179] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.647186] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.648010] VDD_ETH: 3300 mV [ 0.655364] SCSI subsystem initialized [ 0.657287] usbcore: registered new interface driver usbfs [ 0.657653] usbcore: registered new interface driver hub [ 0.658111] usbcore: registered new device driver usb [ 0.663330] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.664428] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.666290] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.667236] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.673431] Switched to clocksource 32k_counter [ 0.818878] NET: Registered protocol family 2 [ 0.820831] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.821105] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.823852] TCP: Hash tables configured (established 8192 bind 8192) [ 0.824096] TCP: reno registered [ 0.824127] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.824493] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.825775] NET: Registered protocol family 1 [ 0.826965] RPC: Registered named UNIX socket transport module. [ 0.826965] RPC: Registered udp transport module. [ 0.826995] RPC: Registered tcp transport module. [ 0.826995] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.835815] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.995422] bounce pool size: 64 pages [ 0.996551] VFS: Disk quotas dquot_6.5.2 [ 0.996765] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.998779] NFS: Registering the id_resolver key type [ 0.999145] Key type id_resolver registered [ 0.999145] Key type id_legacy registered [ 0.999267] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.999786] msgmni has been set to 1473 [ 1.002502] io scheduler noop registered [ 1.002532] io scheduler deadline registered [ 1.002593] io scheduler cfq registered (default) [ 1.008239] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 1.008697] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 1.012145] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.018646] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.018676] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 1.019561] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 1.021270] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.021301] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 1.021697] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 1.023010] omap_uart 48020000.serial: no wakeirq for uart0 [ 1.023040] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 1.023498] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.900482] console [ttyO2] enabled [ 1.905456] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.911315] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.921325] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.960113] brd: module loaded [ 1.979309] loop: module loaded [ 1.985626] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.995758] twl 0-0048: PIH (irq 39) nested IRQs [ 2.003631] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 2.011077] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 2.018493] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 2.025817] VMMC: 1200 <--> 3000 mV at 3000 mV [ 2.032592] VPP: 1800 <--> 2500 mV at 1900 mV [ 2.039337] VUSIM: 1200 <--> 2900 mV [ 2.044982] VDAC: 1800 mV [ 2.049316] VANA: 2100 mV [ 2.054168] VCXIO: 1800 mV [ 2.058563] VUSB: 3300 mV [ 2.063201] V1V8: 1800 mV [ 2.067993] V2V1: 2100 mV [ 2.078735] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.095886] ks8851 spi1.0: message enable is 0 [ 2.107025] ks8851 spi1.0 eth0: revision 1, MAC 82:a6:87:2f:f5:16, IRQ 331, no EEPROM [ 2.118804] usbcore: registered new interface driver asix [ 2.124877] usbcore: registered new interface driver ax88179_178a [ 2.131591] usbcore: registered new interface driver cdc_ether [ 2.138153] usbcore: registered new interface driver smsc95xx [ 2.144531] usbcore: registered new interface driver net1080 [ 2.150817] usbcore: registered new interface driver cdc_subset [ 2.157379] usbcore: registered new interface driver zaurus [ 2.163818] usbcore: registered new interface driver cdc_ncm [ 2.171234] usbcore: registered new interface driver cdc_wdm [ 2.177581] usbcore: registered new interface driver usb-storage [ 2.184326] usbcore: registered new interface driver usbtest [ 2.193695] mousedev: PS/2 mouse device common for all mice [ 2.204040] twl_rtc rtc.5: Power up reset detected. [ 2.210052] twl_rtc rtc.5: Enabling TWL-RTC [ 2.218994] twl_rtc rtc.5: rtc core: registered rtc.5 as rtc0 [ 2.225585] i2c /dev entries driver [ 2.232940] Driver for 1-wire Dallas network protocol. [ 2.243286] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.253112] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.262268] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.272216] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.279541] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.333648] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.342773] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.352264] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.359252] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.366546] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.371459] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.373687] mmc0: new high speed SDHC card at address 0007 [ 2.376373] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.392333] omap_hsmmc 480d5000.mmc: pins are not configured from the driver [ 2.397918] mmcblk0: p1 p2 [ 2.403350] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.448303] usbcore: registered new interface driver usbhid [ 2.454223] usbhid: USB HID core driver [ 2.460510] oprofile: no performance counters [ 2.466522] omap_hsmmc 480d5000.mmc: exceeding card's volts [ 2.472442] oprofile: using timer interrupt. [ 2.477539] TCP: cubic registered [ 2.481018] Initializing XFRM netlink socket [ 2.485717] NET: Registered protocol family 17 [ 2.490478] NET: Registered protocol family 15 [ 2.495452] Key type dns_resolver registered [ 2.501556] Power Management for TI OMAP4+ devices. [ 2.506683] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.513946] ThumbEE CPU extension supported. [ 2.518493] Registering SWP/SWPB emulation handler [ 2.527740] VUSB: disabling [ 2.531311] VANA: disabling [ 2.534973] VDAC: disabling [ 2.540374] VAUX1_6030: disabling [ 2.544189] regulator-dummy: disabling [ 2.552581] twl_rtc rtc.5: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.600708] Waiting for root device /dev/mmcblk1p2... [ 2.721343] mmc1: host does not support reading read-only switch. assuming write-enable. [ 2.731872] mmc1: new high speed SDHC card at address b368 [ 2.739044] mmcblk1: mmc1:b368 USD 3.75 GiB [ 2.746917] mmcblk1: p1 p2 [ 2.826446] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.838562] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.882049] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.883117] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 2.901031] devtmpfs: mounted [ 2.905029] Freeing unused kernel memory: 384K (c0794000 - c07f4000) modprobe: FATAL: Could not load /lib/modules/3.14.31-rt28-54440-g42a2378/modules.dep: No such file or directory INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 4.124877] udevd[850]: starting version 172 . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Activating swap...done. [ 5.983612] EXT4-fs (mmcblk1p2): warning: mounting fs with errors, running e2fsck is recommended [ 6.366302] random: nonblocking pool is initialized [ 6.371612] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux 2.19.1 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...done. Cleaning up temporary files.... Setting kernel variables ...done. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Debian GNU/Linux wheezy/sid armel ttyO2 armel login: