U-Boot SPL 2014.07-rc2-00015-g713ff68 (Jun 03 2014 - 09:09:41) OMAP5432 ES2.0 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img U-Boot 2014.07-rc2-00015-g713ff68 (Jun 03 2014 - 09:09:41), Build: jenkins-github_Bootloader-Builder-315 CPU : OMAP5432 ES2.0 Board: OMAP5432 uEVM I2C: ready DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: No ethernet found. Hit any key to stop autoboot: 5  0 U-Boot# U-Boot# setenv bootargs 'console=ttyO2,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh' U-Boot# loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap5-uevm Sending: Transfer complete - CRC mode, 9(SOH)/4229(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0042170d = 4331277 Bytes U-Boot# bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4331213 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.31-rt28-54440-g42a2378 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Feb 22 17:11:39 MST 2015 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI OMAP5 uEVM board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 519936 [ 0.000000] free_area_init_node: node 0, pgdat c0894b40, node_mem_map ed812000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2544 pages used for memmap [ 0.000000] HighMem zone: 325376 pages, LIFO batch:31 [ 0.000000] OMAP5432 ES2.0 [ 0.000000] PERCPU: Embedded 9 pages/cpu @ed7ca000 s14464 r8192 d14208 u36864 [ 0.000000] pcpu-alloc: s14464 r8192 d14208 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518416 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2031624K/2079744K available (5590K kernel code, 656K rwdata, 2136K rodata, 386K init, 5518K bss, 48120K reserved, 1301504K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0793c00 (7727 kB) [ 0.000000] .init : 0xc0794000 - 0xc07f4880 ( 387 kB) [ 0.000000] .data : 0xc07f6000 - 0xc089a160 ( 657 kB) [ 0.000000] .bss : 0xc089a160 - 0xc0dfdc70 (5519 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000335] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000340] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 2796202663936ns [ 0.000348] Switching to timer-based delay loop [ 0.001252] Console: colour dummy device 80x30 [ 0.001284] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001290] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001296] ... MAX_LOCK_DEPTH: 48 [ 0.001302] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001308] ... CLASSHASH_SIZE: 4096 [ 0.001314] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.001319] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.001325] ... CHAINHASH_SIZE: 16384 [ 0.001331] memory used by lock dependency info: 3695 kB [ 0.001337] per task-struct memory footprint: 1152 bytes [ 0.001370] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440) [ 0.001382] pid_max: default: 32768 minimum: 301 [ 0.001677] Security Framework initialized [ 0.001777] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001788] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.025544] CPU: Testing write buffer coherency: ok [ 0.026277] /cpus/cpu@0 missing clock-frequency property [ 0.026297] /cpus/cpu@1 missing clock-frequency property [ 0.026307] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.026329] Setting up static identity map for 0x8054ce50 - 0x8054cec0 [ 0.029935] CPU1: Booted secondary processor [ 0.029968] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.030391] Brought up 2 CPUs [ 0.030431] SMP: Total of 2 processors activated (24.57 BogoMIPS). [ 0.030439] CPU: All CPU(s) started in SVC mode. [ 0.032345] devtmpfs: initialized [ 0.041860] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.043063] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.044125] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.065062] ------------[ cut here ]------------ [ 0.065080] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2542 _init+0x3a0/0x3f0() [ 0.065086] omap_hwmod: mailbox: doesn't have mpu register target base [ 0.065092] Modules linked in: [ 0.065105] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.31-rt28-54440-g42a2378 #1 [ 0.065132] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.065149] [] (show_stack) from [] (dump_stack+0x78/0x94) [ 0.065163] [] (dump_stack) from [] (warn_slowpath_common+0x68/0x8c) [ 0.065173] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.065184] [] (warn_slowpath_fmt) from [] (_init+0x3a0/0x3f0) [ 0.065196] [] (_init) from [] (omap_hwmod_for_each+0x30/0x5c) [ 0.065207] [] (omap_hwmod_for_each) from [] (__omap_hwmod_setup_all+0x24/0x40) [ 0.065217] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0xe4/0x148) [ 0.065229] [] (do_one_initcall) from [] (kernel_init_freeable+0xf8/0x1c8) [ 0.065239] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.065250] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.065292] ---[ end trace df5ee577ffffbfcf ]--- [ 0.138774] pinctrl core: initialized pinctrl subsystem [ 0.141287] regulator-dummy: no parameters [ 0.142847] NET: Registered protocol family 16 [ 0.147070] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.168838] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.169644] OMAP GPIO hardware version 0.1 [ 0.170931] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.172595] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.174232] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.175931] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.177595] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.179265] gpiochip_add: registered GPIOs 192 to 223 on device: gpio [ 0.181025] gpiochip_add: registered GPIOs 224 to 255 on device: gpio [ 0.182095] platform 50000000.gpmc: Cannot lookup hwmod 'gpmc' [ 0.182447] omap-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 0.182463] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.182545] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x10000000 [ 0.205031] No ATAGs? [ 0.205057] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.205065] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.207333] OMAP DMA hardware revision 0.0 [ 0.241988] bio: create slab at 0 [ 0.244088] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.244115] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.287282] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.288019] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator-mmcsd[0]' [ 0.288609] vmmcsd_fixed: 3000 mV [ 0.293598] SCSI subsystem initialized [ 0.295026] usbcore: registered new interface driver usbfs [ 0.295293] usbcore: registered new interface driver hub [ 0.295614] usbcore: registered new device driver usb [ 0.295910] of_get_named_gpiod_flags exited with status 0 [ 0.295958] hsusb2_phy.4 supply vcc not found, using dummy regulator [ 0.296366] of_get_named_gpiod_flags exited with status 0 [ 0.296394] hsusb3_phy.5 supply vcc not found, using dummy regulator [ 0.298430] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a002840/pinmux_i2c1_pins, deferring probe [ 0.298452] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.299448] omap_i2c 48072000.i2c: bus 1 rev0.12 at 100 kHz [ 0.300192] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz [ 0.301076] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 100 kHz [ 0.301146] omap_i2c 4807c000.i2c: could not find pctldev for node /ocp/pinmux@4a002840/pinmux_i2c5_pins, deferring probe [ 0.301165] platform 4807c000.i2c: Driver omap_i2c requests probe deferral [ 0.305411] Switched to clocksource arch_sys_counter [ 0.413499] NET: Registered protocol family 2 [ 0.414738] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.414936] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.417390] TCP: Hash tables configured (established 8192 bind 8192) [ 0.417524] TCP: reno registered [ 0.417544] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.417871] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.418890] NET: Registered protocol family 1 [ 0.419678] RPC: Registered named UNIX socket transport module. [ 0.419688] RPC: Registered udp transport module. [ 0.419696] RPC: Registered tcp transport module. [ 0.419704] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.425831] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.528518] bounce pool size: 64 pages [ 0.529266] VFS: Disk quotas dquot_6.5.2 [ 0.529407] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.530864] NFS: Registering the id_resolver key type [ 0.531120] Key type id_resolver registered [ 0.531132] Key type id_legacy registered [ 0.531206] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.531585] msgmni has been set to 1458 [ 0.533246] io scheduler noop registered [ 0.533257] io scheduler deadline registered [ 0.533316] io scheduler cfq registered (default) [ 0.537713] pinctrl-single 4a002840.pinmux: 219 pins at pa fc002840 size 438 [ 0.538058] pinctrl-single 4ae0c840.pinmux: 28 pins at pa fce0c840 size 56 [ 0.540533] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.545143] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.545159] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.545860] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.546998] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.547013] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 0.547281] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.548180] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.548195] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 0.548467] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.619308] console [ttyO2] enabled [ 1.623932] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.629799] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.639504] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.650451] omap_uart 48066000.serial: no wakeirq for uart0 [ 1.656311] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48066000[0]' [ 1.665978] 48066000.serial: ttyO4 at MMIO 0x48066000 (irq = 137, base_baud = 3000000) is a OMAP UART4 [ 1.676534] omap_uart 48068000.serial: no wakeirq for uart0 [ 1.682366] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48068000[0]' [ 1.692027] 48068000.serial: ttyO5 at MMIO 0x48068000 (irq = 138, base_baud = 3000000) is a OMAP UART5 [ 1.722297] brd: module loaded [ 1.736613] loop: module loaded [ 1.743452] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.758017] usbcore: registered new interface driver asix [ 1.763905] usbcore: registered new interface driver ax88179_178a [ 1.770559] usbcore: registered new interface driver cdc_ether [ 1.776955] usbcore: registered new interface driver smsc95xx [ 1.783193] usbcore: registered new interface driver net1080 [ 1.789374] usbcore: registered new interface driver cdc_subset [ 1.795814] usbcore: registered new interface driver zaurus [ 1.801923] usbcore: registered new interface driver cdc_ncm [ 1.808903] usbcore: registered new interface driver cdc_wdm [ 1.815087] usbcore: registered new interface driver usb-storage [ 1.821660] usbcore: registered new interface driver usbtest [ 1.830156] mousedev: PS/2 mouse device common for all mice [ 1.838957] i2c /dev entries driver [ 1.844648] Driver for 1-wire Dallas network protocol. [ 1.853627] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.862574] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 1.871684] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 1.881106] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.887128] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.894566] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 1.903670] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 1.913145] 480b4000.mmc supply vmmc_aux not found, using dummy regulator [ 1.920413] omap_hsmmc 480b4000.mmc: pins are not configured from the driver [ 1.965617] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480ad000[0]' [ 1.974869] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480ad000[0]' [ 1.984277] 480ad000.mmc supply vmmc not found, using dummy regulator [ 1.991180] 480ad000.mmc supply vmmc_aux not found, using dummy regulator [ 1.998484] omap_hsmmc 480ad000.mmc: pins are not configured from the driver [ 2.006570] omap_hsmmc 480ad000.mmc: could not set regulator OCR (-22) [ 2.046747] usbcore: registered new interface driver usbhid [ 2.052574] usbhid: USB HID core driver [ 2.058011] oprofile: no performance counters [ 2.058794] mmc0: BKOPS_EN bit is not set [ 2.061219] mmc0: new high speed MMC card at address 0001 [ 2.073890] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.079057] oprofile: using timer interrupt. [ 2.079073] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.079362] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.096271] TCP: cubic registered [ 2.099735] Initializing XFRM netlink socket [ 2.104242] NET: Registered protocol family 17 [ 2.108941] NET: Registered protocol family 15 [ 2.113758] Key type dns_resolver registered [ 2.119324] mmcblk0: unknown partition table [ 2.124195] ThumbEE CPU extension supported. [ 2.126499] mmcblk0boot1: unknown partition table [ 2.128527] mmcblk0boot0: unknown partition table [ 2.138692] Registering SWP/SWPB emulation handler [ 2.146037] regulator-dummy: disabling [ 2.153553] palmas 0-0048: Irq flag is 0x00000000 [ 2.164341] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.209580] smps123: 600 <--> 1500 mV at 1060 mV [ 2.216715] smps45: 600 <--> 1310 mV at 1030 mV [ 2.224259] smps6: 1200 mV [ 2.229429] smps7: 1800 mV [ 2.234461] smps8: 600 <--> 1310 mV at 1040 mV [ 2.241434] smps9: 2100 mV [ 2.246145] smps10_out2: 5000 mV [ 2.251069] smps10_out1: 5000 mV [ 2.255496] ldo1: 1500 <--> 1800 mV [ 2.260879] ldo2: 2800 mV [ 2.266175] ldo3: 1500 mV [ 2.270298] ldo4: 1500 <--> 1800 mV [ 2.276414] ldo5: 1800 mV [ 2.283056] ldo6: 1200 mV [ 2.287564] ldo7: 2000 mV [ 2.292711] ldo8: 3000 mV [ 2.297714] ldo9: 1800 <--> 3000 mV at 900 mV [ 2.304722] ldoln: 1800 mV [ 2.309985] ldousb: 3250 mV [ 2.314114] REGEN1: no parameters [ 2.318099] REGEN2: no parameters [ 2.322311] regen3: no parameters [ 2.326635] SYSEN1: no parameters [ 2.330640] SYSEN2: no parameters [ 2.334347] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.341723] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.347826] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.356933] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.366587] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.375139] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.417364] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.450272] Waiting for root device /dev/mmcblk1p2... [ 2.503933] mmc2: host does not support reading read-only switch. assuming write-enable. [ 2.512510] mmc2: new SD card at address d91a [ 2.517993] mmcblk1: mmc2:d91a SU02G 1.84 GiB [ 2.524579] mmcblk1: p1 p2 [ 2.567104] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.577996] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.607040] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.615603] VFS: Mounted root (ext4 filesystem) readonly on device 179:26. [ 2.626554] devtmpfs: mounted [ 2.629995] Freeing unused kernel memory: 384K (c0794000 - c07f4000) /bin/sh: 0: can't access tty; job control turned off # # #