U-Boot SPL 2013.01-rc1-00207-gfbeb8fc-dirty (Nov 29 2012 - 03:05:13) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2013.01-rc1-00207-gfbeb8fc-dirty (Nov 29 2012 - 03:05:13) CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 3  0 Panda # Panda # setenv bootargs console=ttyO2,230400n8 root=/dev/mmcblk0p2 rootwait vram=32M earlyprintk init=/bin/sh Panda # loady ## Ready for binary (ymodem) download to 0x82000000 at 230400 bps... CSending: uImage Sending: Transfer complete mode, 3(SOH)/4257(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00428480 = 4359296 Bytes Panda # bootm ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-3.10.0-rc7-00768-g9e895ac Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4359232 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.10.0-rc7-00768-g9e895ac (paul@nozomi) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Sun Jun 30 19:19:08 MDT 2013 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c15c9000 s13632 r8192 d15040 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,230400n8 root=/dev/mmcblk0p2 rootwait vram=32M earlyprintk init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1023MB = 1023MB total [ 0.000000] Memory: 1007964k/1007964k available, 40612k reserved, 269312K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0757828 (7487 kB) [ 0.000000] .init : 0xc0758000 - 0xc07ba540 ( 394 kB) [ 0.000000] .data : 0xc07bc000 - 0xc08515c8 ( 598 kB) [ 0.000000] .bss : 0xc08515c8 - 0xc0db5a18 (5522 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.001068] Calibrating delay loop... 1391.00 BogoMIPS (lpj=6955008) [ 0.079742] pid_max: default: 32768 minimum: 301 [ 0.080322] Security Framework initialized [ 0.080505] Mount-cache hash table entries: 512 [ 0.084228] CPU: Testing write buffer coherency: ok [ 0.085754] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086029] Setting up static identity map for 0xc054fd30 - 0xc054fda0 [ 0.086090] L310 cache controller enabled [ 0.086120] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.090393] CPU1: Booted secondary processor [ 0.175994] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.176452] Brought up 2 CPUs [ 0.176452] SMP: Total of 2 processors activated (2788.55 BogoMIPS). [ 0.176483] CPU: All CPU(s) started in SVC mode. [ 0.178894] devtmpfs: initialized [ 0.249877] pinctrl core: initialized pinctrl subsystem [ 0.253051] regulator-dummy: no parameters [ 0.255920] NET: Registered protocol family 16 [ 0.263580] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.264801] omap-gpmc omap-gpmc: GPMC revision 6.0 [ 0.272613] OMAP GPIO hardware version 0.1 [ 0.284698] omap_mux_init: Add partition: #1: core, flags: 3 [ 0.286560] omap_mux_init: Add partition: #2: wkup, flags: 3 [ 0.286743] error setting wl12xx data: -38 [ 0.286956] omap_mux_get_by_name: Could not find signal sys_nirq [ 0.291076] omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.361419] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.361450] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.373535] OMAP DMA hardware revision 0.0 [ 0.376678] arm-pmu: alias fck already exists [ 0.416564] bio: create slab at 0 [ 0.470703] omap-dma-engine omap-dma-engine: OMAP DMA engine driver [ 0.471923] vwl1271: 1800 mV [ 0.472656] hsusb1_reset: 3300 mV [ 0.473419] hsusb1_vcc: 3300 mV [ 0.478668] SCSI subsystem initialized [ 0.480133] usbcore: registered new interface driver usbfs [ 0.480438] usbcore: registered new interface driver hub [ 0.480834] usbcore: registered new device driver usb [ 0.486297] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.488220] twl 1-0048: PIH (irq 39) chaining IRQs 418..438 [ 0.490173] VUSB: 3300 mV normal standby [ 0.491516] vdd_mpu: 500 <--> 1500 mV normal [ 0.492736] vdd_iva: 500 <--> 1500 mV normal [ 0.493988] vdd_core: 500 <--> 1500 mV normal [ 0.495697] V1V8: 1800 mV normal standby [ 0.497650] V2V1: 2100 mV normal standby [ 0.499114] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 0.500854] VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 0.502746] VCXIO: 1800 mV normal standby [ 0.502838] VCXIO: supplied by V2V1 [ 0.505401] VDAC: 1800 mV normal standby [ 0.505493] VDAC: supplied by V2V1 [ 0.507568] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 0.509246] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 0.511322] VANA: 2100 mV normal standby [ 0.512207] omap_i2c omap_i2c.1: bus 1 rev0.11 at 400 kHz [ 0.513092] omap_i2c omap_i2c.2: bus 2 rev0.11 at 400 kHz [ 0.514312] omap_i2c omap_i2c.3: bus 3 rev0.11 at 100 kHz [ 0.515106] omap_i2c omap_i2c.4: bus 4 rev0.11 at 400 kHz [ 0.520812] Switching to clocksource 32k_counter [ 0.622711] NET: Registered protocol family 2 [ 0.624481] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.624816] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.627532] TCP: Hash tables configured (established 8192 bind 8192) [ 0.627746] TCP: reno registered [ 0.627777] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.628143] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.629516] NET: Registered protocol family 1 [ 0.630615] RPC: Registered named UNIX socket transport module. [ 0.630615] RPC: Registered udp transport module. [ 0.630645] RPC: Registered tcp transport module. [ 0.630645] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.631530] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.631805] CPU PMU: probing PMU on CPU 1 [ 0.631896] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.800781] bounce pool size: 64 pages [ 0.801422] VFS: Disk quotas dquot_6.5.2 [ 0.801635] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.803924] NFS: Registering the id_resolver key type [ 0.804290] Key type id_resolver registered [ 0.804321] Key type id_legacy registered [ 0.804443] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.804992] msgmni has been set to 1474 [ 0.807556] io scheduler noop registered [ 0.807586] io scheduler deadline registered [ 0.807678] io scheduler cfq registered (default) [ 0.810546] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.815887] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 0.817596] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 0.818878] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 1.215759] console [ttyO2] enabled [ 1.218933] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 1.245178] brd: module loaded [ 1.259918] loop: module loaded [ 1.270355] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.282165] usbcore: registered new interface driver asix [ 1.285400] usbcore: registered new interface driver ax88179_178a [ 1.289031] usbcore: registered new interface driver cdc_ether [ 1.292724] usbcore: registered new interface driver smsc95xx [ 1.296142] usbcore: registered new interface driver net1080 [ 1.299530] usbcore: registered new interface driver cdc_subset [ 1.303070] usbcore: registered new interface driver zaurus [ 1.306488] usbcore: registered new interface driver cdc_ncm [ 1.310852] usbcore: registered new interface driver cdc_wdm [ 1.314361] usbcore: registered new interface driver usb-storage [ 1.317962] usbcore: registered new interface driver usbtest [ 1.322479] mousedev: PS/2 mouse device common for all mice [ 1.329040] twl_rtc twl_rtc: Power up reset detected. [ 1.332763] twl_rtc twl_rtc: Enabling TWL-RTC [ 1.339233] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 1.401794] i2c /dev entries driver [ 1.406677] Driver for 1-wire Dallas network protocol. [ 1.412597] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.418487] omap-dma-engine omap-dma-engine: allocating channel for 62 [ 1.422149] omap-dma-engine omap-dma-engine: allocating channel for 61 [ 1.471466] omap-dma-engine omap-dma-engine: allocating channel for 60 [ 1.475067] omap-dma-engine omap-dma-engine: allocating channel for 59 [ 1.584045] usbcore: registered new interface driver usbhid [ 1.586547] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 1.591949] usbhid: USB HID core driver [ 1.595001] oprofile: using arm/armv7-ca9 [ 1.597717] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 1.597808] TCP: cubic registered [ 1.597808] Initializing XFRM netlink socket [ 1.597900] NET: Registered protocol family 17 [ 1.597961] NET: Registered protocol family 15 [ 1.598266] Key type dns_resolver registered [ 1.612060] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 1.613708] mmc1: new SDIO card at address 0001 [ 1.626861] Power Management for TI OMAP4. [ 1.629119] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.632995] ThumbEE CPU extension supported. [ 1.639495] VANA: incomplete constraints, leaving on [ 1.643615] VDAC: incomplete constraints, leaving on [ 1.647277] VUSB: incomplete constraints, leaving on [ 1.653442] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.661468] Waiting for root device /dev/mmcblk0p2... [ 1.989959] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.997253] mmc0: new high speed SD card at address 1234 [ 2.001800] mmcblk0: mmc0:1234 SA02G 1.83 GiB [ 2.009735] mmcblk0: p1 p2 [ 2.110290] kjournald starting. Commit interval 5 seconds [ 2.110534] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended [ 2.512420] EXT3-fs (mmcblk0p2): using internal journal [ 2.515655] EXT3-fs (mmcblk0p2): recovery complete [ 2.518310] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode [ 2.522247] VFS: Mounted root (ext3 filesystem) on device 179:2. [ 2.529632] devtmpfs: mounted [ 2.531707] Freeing unused kernel memory: 392K (c0758000 - c07ba000) /bin/sh: can't access tty; job control turned off / # / # / # %% Start PM consolidated quick test (retention only) %% Preparation / # / # mount -t sysfs none /sys / # / # mount -t debugfs none /debug / # / # / # / # echo -1 > /sys/devices/platform/omap_uart.0/power/autosuspend_delay_ms / # / # echo -1 > /sys/devices/platform/omap_uart.1/power/autosuspend_delay_ms / # / # echo -1 > /sys/devices/platform/omap_uart.2/power/autosuspend_delay_ms / # / # echo -1 > /sys/devices/platform/omap_uart.3/power/autosuspend_delay_ms / # / # echo 0 > /debug/pm_debug/enable_off_mode / # / # %% Baseline pm_debug count dump cat /debug/pm_debug/count [ 12.181640] pwrdm state mismatch(ivahd_pwrdm) 3 != 1 [ 12.184448] pwrdm state mismatch(tesla_pwrdm) 3 != 1 [ 12.187194] pwrdm state mismatch(dss_pwrdm) 3 != 1 [ 12.189880] pwrdm state mismatch(abe_pwrdm) 3 != 1 cefuse_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0 always_on_core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0 l4per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 l3init_pwrdm (ON),OFF:0,RET:3,INA:0,ON:4,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 ivahd_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 mpu_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 cpu1_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cpu0_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 tesla_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 dss_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 abe_pwrdm (ON),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 gfx_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:0 l3_dma_clkdm->core_pwrdm (0) emu_sys_clkdm->emu_pwrdm (0) l4_wkup_clkdm->wkup_pwrdm (3) l3_dss_clkdm->dss_pwrdm (0) iss_clkdm->cam_pwrdm (0) l3_1_clkdm->core_pwrdm (0) l3_2_clkdm->core_pwrdm (1) mpuss_clkdm->mpu_pwrdm (1) ducati_clkdm->core_pwrdm (0) l4_ao_clkdm->always_on_core_pwrdm (0) l3_emif_clkdm->core_pwrdm (2) mpu1_clkdm->cpu1_pwrdm (0) mpu0_clkdm->cpu0_pwrdm (0) d2d_clkdm->core_pwrdm (0) l3_init_clkdm->l3init_pwrdm (1) l3_instr_clkdm->core_pwrdm (0) abe_clkdm->abe_pwrdm (0) l4_per_clkdm->l4per_pwrdm (6) l4_secure_clkdm->l4per_pwrdm (0) ivahd_clkdm->ivahd_pwrdm (0) l3_gfx_clkdm->gfx_pwrdm (0) tesla_clkdm->tesla_pwrdm (0) l4_cfg_clkdm->core_pwrdm (0) l4_cefuse_clkdm->cefuse_pwrdm (0) / # / # echo enabled > /sys/devices/platform/omap_uart.2/tty/ttyO2/power/wakeup / # %% Start retention double suspend/resume UART wakeup test / # echo mem > /sys/power/state [ 14.194702] PM: Syncing filesystems ... done. [ 15.413482] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 15.417480] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 15.432800] Suspending console(s) (use no_console_suspend to debug) XÃ[ 15.451629] PM: suspend of devices complete after 11.566 msecs [ 15.455505] PM: late suspend of devices complete after 3.845 msecs [ 15.459899] PM: noirq suspend of devices complete after 4.394 msecs [ 15.459960] Disabling non-boot CPUs ... [ 15.464904] CPU1: shutdown [ 15.468811] Successfully put all powerdomains to target state [ 15.468811] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 15.469085] Enabling non-boot CPUs ... [ 15.471923] CPU1: Booted secondary processor [ 15.472900] CPU1 is up [ 15.475219] PM: noirq resume of devices complete after 0.488 msecs [ 15.475219] PM: early resume of devices complete after 0.001 msecs [ 16.068695] PM: resume of devices complete after 593.444 msecs [ 16.110168] Restarting tasks ... done. / # / # X /bin/sh: X: not found / # / # cat /debug/pm_debug/count cefuse_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0 always_on_core_pwrdm (ON),OFF:1,RET:0,INA:0,ON:2,RET-LOGIC-OFF:0 l4per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 l3init_pwrdm (RET),OFF:0,RET:7,INA:0,ON:7,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 ivahd_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 mpu_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:1,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 cpu1_pwrdm (ON),OFF:1,RET:0,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cpu0_pwrdm (ON),OFF:1,RET:0,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 tesla_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 dss_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 abe_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 gfx_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:1,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:1 l3_dma_clkdm->core_pwrdm (0) emu_sys_clkdm->emu_pwrdm (0) l4_wkup_clkdm->wkup_pwrdm (3) l3_dss_clkdm->dss_pwrdm (0) iss_clkdm->cam_pwrdm (0) l3_1_clkdm->core_pwrdm (0) l3_2_clkdm->core_pwrdm (1) mpuss_clkdm->mpu_pwrdm (1) ducati_clkdm->core_pwrdm (0) l4_ao_clkdm->always_on_core_pwrdm (0) l3_emif_clkdm->core_pwrdm (2) mpu1_clkdm->cpu1_pwrdm (0) mpu0_clkdm->cpu0_pwrdm (0) d2d_clkdm->core_pwrdm (0) l3_init_clkdm->l3init_pwrdm (0) l3_instr_clkdm->core_pwrdm (0) abe_clkdm->abe_pwrdm (0) l4_per_clkdm->l4per_pwrdm (7) l4_secure_clkdm->l4per_pwrdm (0) ivahd_clkdm->ivahd_pwrdm (0) l3_gfx_clkdm->gfx_pwrdm (0) tesla_clkdm->tesla_pwrdm (0) l4_cfg_clkdm->core_pwrdm (0) l4_cefuse_clkdm->cefuse_pwrdm (0) / # / # / # / # echo mem > /sys/power/state [ 18.675018] PM: Syncing filesystems ... done. [ 19.873718] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 19.877685] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done. [ 19.901794] Suspending console(s) (use no_console_suspend to debug) XÃ[ 19.917663] PM: suspend of devices complete after 15.869 msecs [ 19.923370] PM: late suspend of devices complete after 5.706 msecs [ 19.927551] PM: noirq suspend of devices complete after 4.180 msecs [ 19.927551] Disabling non-boot CPUs ... [ 19.929168] CPU1: shutdown [ 19.930572] Successfully put all powerdomains to target state [ 19.930572] hw-breakpoint: CPU 0 failed to disable vector catch [ 19.930725] Enabling non-boot CPUs ... [ 19.933380] CPU1: Booted secondary processor [ 19.933990] CPU1 is up [ 19.936218] PM: noirq resume of devices complete after 2.197 msecs [ 19.940063] PM: early resume of devices complete after 0.001 msecs [ 20.489196] PM: resume of devices complete after 549.133 msecs [ 20.530151] Restarting tasks ... done. / # / # X /bin/sh: X: not found / # / # cat /debug/pm_debug/count cefuse_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0 always_on_core_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0 l4per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 l3init_pwrdm (RET),OFF:0,RET:10,INA:0,ON:10,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 ivahd_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 mpu_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:2,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 cpu1_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cpu0_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 tesla_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 dss_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 abe_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 gfx_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:2 l3_dma_clkdm->core_pwrdm (0) emu_sys_clkdm->emu_pwrdm (0) l4_wkup_clkdm->wkup_pwrdm (3) l3_dss_clkdm->dss_pwrdm (0) iss_clkdm->cam_pwrdm (0) l3_1_clkdm->core_pwrdm (0) l3_2_clkdm->core_pwrdm (1) mpuss_clkdm->mpu_pwrdm (1) ducati_clkdm->core_pwrdm (0) l4_ao_clkdm->always_on_core_pwrdm (0) l3_emif_clkdm->core_pwrdm (2) mpu1_clkdm->cpu1_pwrdm (0) mpu0_clkdm->cpu0_pwrdm (0) d2d_clkdm->core_pwrdm (0) l3_init_clkdm->l3init_pwrdm (0) l3_instr_clkdm->core_pwrdm (0) abe_clkdm->abe_pwrdm (0) l4_per_clkdm->l4per_pwrdm (7) l4_secure_clkdm->l4per_pwrdm (0) ivahd_clkdm->ivahd_pwrdm (0) l3_gfx_clkdm->gfx_pwrdm (0) tesla_clkdm->tesla_pwrdm (0) l4_cfg_clkdm->core_pwrdm (0) l4_cefuse_clkdm->cefuse_pwrdm (0) / # / # / # / # ./test_rootfs_access_nonexistent_file__ret_susp /bin/sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found / # / # %% End retention double suspend/resume UART wakeup test %% Start retention dynamic idle UART wakeup test echo 3000 > /sys/devices/platform/omap_uart.0/power/autosuspend_delay_ms / # / # echo 3000 > /sys/devices/platform/omap_uart.1/power/autosuspend_delay_ms / # / # echo 3000 > /sys/devices/platform/omap_uart.2/power/autosuspend_delay_ms / # / # echo 3000 > /sys/devices/platform/omap_uart.3/power/autosuspend_delay_ms / # / # C /bin/sh: C: not found / # / # cat /debug/pm_debug/count cefuse_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0 always_on_core_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0 l4per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 l3init_pwrdm (RET),OFF:0,RET:12,INA:0,ON:12,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 ivahd_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 mpu_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:2,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 cpu1_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cpu0_pwrdm (ON),OFF:2,RET:0,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 tesla_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0 dss_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 abe_pwrdm (RET),OFF:1,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 gfx_pwrdm (OFF),OFF:2,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:2,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0,RET-MEMBANK5-OFF:2 l3_dma_clkdm->core_pwrdm (0) emu_sys_clkdm->emu_pwrdm (0) l4_wkup_clkdm->wkup_pwrdm (3) l3_dss_clkdm->dss_pwrdm (0) iss_clkdm->cam_pwrdm (0) l3_1_clkdm->core_pwrdm (0) l3_2_clkdm->core_pwrdm (1) mpuss_clkdm->mpu_pwrdm (1) ducati_clkdm->core_pwrdm (0) l4_ao_clkdm->always_on_core_pwrdm (0) l3_emif_clkdm->core_pwrdm (2) mpu1_clkdm->cpu1_pwrdm (0) mpu0_clkdm->cpu0_pwrdm (0) d2d_clkdm->core_pwrdm (0) l3_init_clkdm->l3init_pwrdm (0) l3_instr_clkdm->core_pwrdm (0) abe_clkdm->abe_pwrdm (0) l4_per_clkdm->l4per_pwrdm (3) l4_secure_clkdm->l4per_pwrdm (0) ivahd_clkdm->ivahd_pwrdm (0) l3_gfx_clkdm->gfx_pwrdm (0) tesla_clkdm->tesla_pwrdm (0) l4_cfg_clkdm->core_pwrdm (0) l4_cefuse_clkdm->cefuse_pwrdm (0) / # / # / # / # ./test_rootfs_access_nonexistent_file__ret_dyn /bin/sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found / # / # echo -1 > /sys/devices/platform/omap_uart.0/power/autosuspend_delay_ms / # / # echo -1 > /sys/devices/platform/omap_uart.1/power/autosuspend_delay_ms / # / # echo -1 > /sys/devices/platform/omap_uart.2/power/autosuspend_delay_ms / # / # echo -1 > /sys/devices/platform/omap_uart.3/power/autosuspend_delay_ms / # / # %% End retention dynamic idle UART wakeup test %% End PM consolidated quick test (retention only)