U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete - CRC mode, 4(SOH)/4433(STX)/0(CAN) packets, 3 retries ## Total Size = 0x004544b0 = 4539568 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4539504 Bytes = 4.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.12.0-rc4-23950-gd0e639c (paul@knihy) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Mon Oct 7 01:42:10 MDT 2013 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c08bb3c0, node_mem_map c0e2a000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1642000 s14016 r8192 d14656 u36864 [ 0.000000] pcpu-alloc: s14016 r8192 d14656 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1007476K/1047552K available (5783K kernel code, 657K rwdata, 2084K rodata, 393K init, 5523K bss, 40076K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07b70d8 (7869 kB) [ 0.000000] .init : 0xc07b8000 - 0xc081a6c0 ( 394 kB) [ 0.000000] .data : 0xc081c000 - 0xc08c04c8 ( 658 kB) [ 0.000000] .bss : 0xc08c04c8 - 0xc0e25260 (5524 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] smp_twd: clock not found -2 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] Calibrating local timer... 348.13MHz. [ 0.059844] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.149322] pid_max: default: 32768 minimum: 301 [ 0.149932] Security Framework initialized [ 0.150085] Mount-cache hash table entries: 512 [ 0.161621] CPU: Testing write buffer coherency: ok [ 0.163146] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.163208] Setting up static identity map for 0xc057fc38 - 0xc057fca8 [ 0.163330] L310 cache controller enabled [ 0.163360] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB [ 0.168029] CPU1: Booted secondary processor [ 0.248840] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.249359] Brought up 2 CPUs [ 0.249389] SMP: Total of 2 processors activated. [ 0.249420] CPU: All CPU(s) started in SVC mode. [ 0.251953] devtmpfs: initialized [ 0.261230] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.330474] pinctrl core: initialized pinctrl subsystem [ 0.333679] regulator-dummy: no parameters [ 0.337921] NET: Registered protocol family 16 [ 0.344940] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.423400] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.424499] OMAP GPIO hardware version 0.1 [ 0.426177] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.428771] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.430938] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.433105] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.435272] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.436950] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.462982] No ATAGs? [ 0.463043] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.463043] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.467010] OMAP DMA hardware revision 0.0 [ 0.515686] bio: create slab at 0 [ 0.518585] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.518615] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.575714] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.577636] of_get_named_gpio_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.578308] VDD_ETH: 3300 mV [ 0.584075] SCSI subsystem initialized [ 0.585662] usbcore: registered new interface driver usbfs [ 0.586029] usbcore: registered new interface driver hub [ 0.586486] usbcore: registered new device driver usb [ 0.590698] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.591674] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.593322] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.594177] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.600494] Switched to clocksource 32k_counter [ 0.720733] NET: Registered protocol family 2 [ 0.722534] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.722869] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.725585] TCP: Hash tables configured (established 8192 bind 8192) [ 0.725830] TCP: reno registered [ 0.725860] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.726226] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.727539] NET: Registered protocol family 1 [ 0.728942] RPC: Registered named UNIX socket transport module. [ 0.728942] RPC: Registered udp transport module. [ 0.728973] RPC: Registered tcp transport module. [ 0.728973] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.729827] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.909790] bounce pool size: 64 pages [ 0.910522] VFS: Disk quotas dquot_6.5.2 [ 0.910736] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.913055] NFS: Registering the id_resolver key type [ 0.913421] Key type id_resolver registered [ 0.913452] Key type id_legacy registered [ 0.913543] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.914123] msgmni has been set to 1473 [ 0.917083] io scheduler noop registered [ 0.917114] io scheduler deadline registered [ 0.917205] io scheduler cfq registered (default) [ 0.918426] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.918914] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.922271] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.927124] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.927947] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.929382] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 0.929870] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.931060] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 0.931457] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.750457] console [ttyO2] enabled [ 1.755218] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.764984] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.797698] brd: module loaded [ 1.814300] loop: module loaded [ 1.820129] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.830566] twl 0-0048: PIH (irq 39) nested IRQs [ 1.838165] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.845397] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.852600] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.859863] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.866455] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.873046] VUSIM: 1200 <--> 2900 mV [ 1.878448] VDAC: 1800 mV [ 1.882690] VANA: 2100 mV [ 1.887237] VCXIO: 1800 mV [ 1.891571] VUSB: 3300 mV [ 1.896240] V1V8: 1800 mV [ 1.900848] V2V1: 2100 mV [ 1.910980] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.921081] omap-dma-engine 4a056000.dma-controller: allocating channel for 36 [ 1.928771] omap-dma-engine 4a056000.dma-controller: allocating channel for 35 [ 1.942718] ks8851 spi1.0: message enable is 0 [ 1.953430] ks8851 spi1.0 eth0: revision 1, MAC e6:ca:9e:8c:87:ce, IRQ 331, no EEPROM [ 1.964538] usbcore: registered new interface driver asix [ 1.970642] usbcore: registered new interface driver ax88179_178a [ 1.977386] usbcore: registered new interface driver cdc_ether [ 1.983886] usbcore: registered new interface driver r815x [ 1.990020] usbcore: registered new interface driver smsc95xx [ 1.996429] usbcore: registered new interface driver net1080 [ 2.003143] usbcore: registered new interface driver cdc_subset [ 2.009704] usbcore: registered new interface driver zaurus [ 2.015960] usbcore: registered new interface driver cdc_ncm [ 2.023315] usbcore: registered new interface driver cdc_wdm [ 2.029632] usbcore: registered new interface driver usb-storage [ 2.036346] usbcore: registered new interface driver usbtest [ 2.043762] mousedev: PS/2 mouse device common for all mice [ 2.053833] twl_rtc rtc.5: Power up reset detected. [ 2.059875] twl_rtc rtc.5: Enabling TWL-RTC [ 2.068695] twl_rtc rtc.5: rtc core: registered rtc.5 as rtc0 [ 2.075286] i2c /dev entries driver [ 2.082214] Driver for 1-wire Dallas network protocol. [ 2.088989] ti-soc-thermal 4a002260.bandgap: failed to request fclock reference [ 2.096771] ti-soc-thermal: probe of 4a002260.bandgap failed with error -2 [ 2.106811] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.116333] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.125457] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.134918] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.142639] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.150848] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.190582] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.199676] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.208953] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 2.216644] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.224334] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 2.228454] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.230682] mmc0: new high speed SDHC card at address 0007 [ 2.244750] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 2.252166] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 2.261444] ledtrig-cpu: registered to indicate activity on CPUs [ 2.261535] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.274078] usbcore: registered new interface driver usbhid [ 2.280059] usbhid: USB HID core driver [ 2.280395] mmcblk0: p1 p2 [ 2.288421] oprofile: no performance counters [ 2.295684] oprofile: using timer interrupt. [ 2.300781] TCP: cubic registered [ 2.304290] Initializing XFRM netlink socket [ 2.308898] NET: Registered protocol family 17 [ 2.313690] NET: Registered protocol family 15 [ 2.318695] Key type dns_resolver registered [ 2.324493] Power Management for TI OMAP4+ devices. [ 2.329681] Power Management for TI OMAP4. [ 2.334045] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.341308] ThumbEE CPU extension supported. [ 2.349029] VUSB: disabling [ 2.352691] VANA: disabling [ 2.356323] VDAC: disabling [ 2.361846] VAUX1_6030: disabling [ 2.369628] twl_rtc rtc.5: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.385467] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.398651] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 2.443328] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.455841] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 6.140380] EXT4-fs (mmcblk0p2): recovery complete [ 6.459472] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.459472] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 6.485748] devtmpfs: mounted [ 6.485748] Freeing unused kernel memory: 392K (c07b8000 - c081a000) [ 7.055877] init: Failed to create pty - disabling logging for job [ 7.055877] init: Temporary process spawn error: No space left on device [ 7.135864] init: Failed to create pty - disabling logging for job [ 7.143249] init: Temporary process spawn error: No space left on device [ 7.171508] init: Failed to create pty - disabling logging for job [ 7.171508] init: Temporary process spawn error: No space left on device [ 7.192687] init: Failed to create pty - disabling logging for job [ 7.200714] init: Temporary process spawn error: No space left on device [ 7.421295] init: ureadahead main process (772) terminated with status 5 [ 7.783264] init: Failed to create pty - disabling logging for job [ 7.791503] init: Temporary process spawn error: No space left on device [ 7.831573] init: Failed to create pty - disabling logging for job [ 7.831573] init: Temporary process spawn error: No space left on device [ 7.958435] init: Failed to create pty - disabling logging for job [ 7.965209] init: Temporary process spawn error: No space left on device [ 8.613861] udevd[829]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk0p2: clean, 177144/963584 files, 2981829/7708672 blocks [ 11.671997] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 11.915100] init: udev-fallback-graphics main process (1516) terminated with status 1 [ 12.181976] init: plymouth main process (773) killed by SEGV signal [ 12.191558] init: plymouth-splash main process (1532) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.516967] init: plymouth-log main process (1580) terminated with status 1 [ 12.588195] init: failsafe main process (1581) killed by TERM signal [ 13.440490] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 13.666320] init: plymouth-upstart-bridge main process (1622) terminated with status 1 speech-dispatcher disabled; edit /etc/default/speech-dispatcher [ 15.425537] init: bluetooth main process (1646) terminated with status 1 [ 15.453399] init: bluetooth main process ended, respawning [ 15.593383] init: alsa-restore main process (1684) terminated with status 19 saned disabled; edit /etc/default/saned [ 15.635559] init: hybrid-gfx main process (1694) terminated with status 1 [ 16.080566] init: bluetooth main process (1758) terminated with status 1 [ 16.089111] init: bluetooth main process ended, respawning [ 16.282562] init: bluetooth main process (1796) terminated with status 1 [ 16.290649] init: bluetooth main process ended, respawning [ 16.456542] init: bluetooth main process (1819) terminated with status 1 [ 16.464569] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 17.792633] init: bluetooth main process (1846) terminated with status 1 [ 17.800323] init: bluetooth main process ended, respawning