CCSending /srv/serial/u-boot-spl.bin, 784 blocks: Give your local XMODEM receive command now. Transfer complete U-Boot SPL 2013.04-00235-g48e0b2b (May 18 2013 - 18:06:38) musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 CSending: u-boot.bin Sending: Transfer complete - CRC mode, 3(SOH)/375(STX)/0(CAN) packets, 3 retries Loaded 384084 bytes U-Boot 2013.04-00235-g48e0b2b (May 18 2013 - 18:06:38) I2C: ready DRAM: 256 MiB WARNING: Caches not enabled NAND: No NAND device found!!! 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 Net: not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 1  0 mmc_send_cmd : timeout: No status update Card did not respond to voltage select! mmc0(part 0) is current device mmc_send_cmd : timeout: No status update Card did not respond to voltage select! Booting from nand ... no devices available Wrong Image Format for bootm command ERROR: can't get kernel image! U-Boot# a askenv - get environment variables from stdin Usage: askenv name [message] [size] - get environment variable 'name' from stdin (max 'size' chars) U-Boot# setenv autoload off; setenv serverip 192.168.57.1; dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.57.138 U-Boot# tftp 0x81000000 zImage.omap2plus_defconfig link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.57.1; our IP address is 192.168.57.138 Filename 'zImage.omap2plus_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################# 1.1 MiB/s done Bytes transferred = 4232528 (409550 hex) U-Boot# tftp 0x82000000 am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.57.1; our IP address is 192.168.57.138 Filename 'am335x-bone.dtb'. Load address: 0x82000000 Loading: *## 938.5 KiB/s done Bytes transferred = 17315 (43a3 hex) U-Boot# setenv bootargs console=ttyO0,115200n8 rw debug ignore_loglevel earlyprintk root=/dev/nfs nfsroot=192.168.57.1:/srv/nfs4/rootfs2 nfsrootdebug ip=dhcp U-Boot# U-Boot# bootz 0x81000000 - 0x82000000 ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 820073a2 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.13.0-rc2-00309-gdc1ccc4 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Dec 8 17:56:08 MST 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at 8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c08755c0, node_mem_map c0de1000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES1.0 (sgx neon ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0fed000 s13952 r8192 d14720 u36864 [ 0.000000] pcpu-alloc: s13952 r8192 d14720 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO0,115200n8 rw debug ignore_loglevel earlyprintk root=/dev/nfs nfsroot=192.168.57.1:/srv/nfs4/rootfs2 nfsrootdebug ip=dhcp [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 228132K/261120K available (5475K kernel code, 658K rwdata, 2128K rodata, 385K init, 5527K bss, 32988K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0774f24 (7604 kB) [ 0.000000] .init : 0xc0775000 - 0xc07d5680 ( 386 kB) [ 0.000000] .data : 0xc07d6000 - 0xc087aa00 ( 659 kB) [ 0.000000] .bss : 0xc087aa00 - 0xc0de0870 (5528 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns [ 0.000000] OMAP clocksource: timer1 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.001507] Calibrating delay loop... 363.72 BogoMIPS (lpj=1818624) [ 0.109381] pid_max: default: 32768 minimum: 301 [ 0.110014] Security Framework initialized [ 0.110203] Mount-cache hash table entries: 512 [ 0.129671] CPU: Testing write buffer coherency: ok [ 0.131570] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.131662] Setting up static identity map for 0x80530ed0 - 0x80530f40 [ 0.136608] Brought up 1 CPUs [ 0.136635] SMP: Total of 1 processors activated. [ 0.136651] CPU: All CPU(s) started in SVC mode. [ 0.141130] devtmpfs: initialized [ 0.155667] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.185239] omap_hwmod: debugss: _wait_target_disable failed [ 0.249316] pinctrl core: initialized pinctrl subsystem [ 0.255662] regulator-dummy: no parameters [ 0.260440] NET: Registered protocol family 16 [ 0.269414] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.295612] platform 49000000.edma: alias fck already exists [ 0.295659] platform 49000000.edma: alias fck already exists [ 0.295688] platform 49000000.edma: alias fck already exists [ 0.300208] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.302018] OMAP GPIO hardware version 0.1 [ 0.305622] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.310182] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.314363] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.338635] No ATAGs? [ 0.338668] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.431222] bio: create slab at 0 [ 0.487097] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.488503] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.490582] vmmcsd_fixed: 3300 mV [ 0.501695] SCSI subsystem initialized [ 0.504693] usbcore: registered new interface driver usbfs [ 0.505372] usbcore: registered new interface driver hub [ 0.506449] usbcore: registered new device driver usb [ 0.511381] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe [ 0.511450] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral [ 0.523188] Switched to clocksource timer1 [ 0.749687] NET: Registered protocol family 2 [ 0.752309] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.752571] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 0.754093] TCP: Hash tables configured (established 2048 bind 2048) [ 0.754390] TCP: reno registered [ 0.754435] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.754782] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.756729] NET: Registered protocol family 1 [ 0.759402] RPC: Registered named UNIX socket transport module. [ 0.759434] RPC: Registered udp transport module. [ 0.759451] RPC: Registered tcp transport module. [ 0.759469] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.761257] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 1.009313] VFS: Disk quotas dquot_6.5.2 [ 1.009642] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.012910] NFS: Registering the id_resolver key type [ 1.013652] Key type id_resolver registered [ 1.013685] Key type id_legacy registered [ 1.013863] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.014586] msgmni has been set to 477 [ 1.020008] io scheduler noop registered [ 1.020040] io scheduler deadline registered [ 1.020132] io scheduler cfq registered (default) [ 1.024699] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 1.030659] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.041149] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@44e09000[0]' [ 1.043139] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.751720] console [ttyO0] enabled [ 1.762436] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 1.813989] brd: module loaded [ 1.843616] loop: module loaded [ 1.856020] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.875819] usbcore: registered new interface driver asix [ 1.882136] usbcore: registered new interface driver ax88179_178a [ 1.889834] usbcore: registered new interface driver cdc_ether [ 1.897021] usbcore: registered new interface driver r815x [ 1.903637] usbcore: registered new interface driver smsc95xx [ 1.910298] usbcore: registered new interface driver net1080 [ 1.917052] usbcore: registered new interface driver cdc_subset [ 1.924065] usbcore: registered new interface driver zaurus [ 1.930635] usbcore: registered new interface driver cdc_ncm [ 1.939800] usbcore: registered new interface driver cdc_wdm [ 1.946899] usbcore: registered new interface driver usb-storage [ 1.954252] usbcore: registered new interface driver usbtest [ 1.964320] mousedev: PS/2 mouse device common for all mice [ 1.978122] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 1.987971] i2c /dev entries driver [ 1.992230] Driver for 1-wire Dallas network protocol. [ 2.005555] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.017161] of_get_named_gpiod_flags exited with status 0 [ 2.022869] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]' [ 2.033512] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 2.040716] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 2.048500] omap_hsmmc 48060000.mmc: vmmc regulator missing [ 2.054778] edma-dma-engine edma-dma-engine.0: freeing channel for 24 [ 2.061580] edma-dma-engine edma-dma-engine.0: freeing channel for 25 [ 2.068759] platform 48060000.mmc: Driver omap_hsmmc requests probe deferral [ 2.077794] of_get_named_gpiod_flags exited with status 0 [ 2.083693] of_get_named_gpiod_flags exited with status 0 [ 2.089394] of_get_named_gpiod_flags exited with status 0 [ 2.095151] of_get_named_gpiod_flags exited with status 0 [ 2.100858] of_get_named_gpiod_flags exited with status 0 [ 2.108448] of_get_named_gpiod_flags exited with status 0 [ 2.115289] of_get_named_gpiod_flags exited with status 0 [ 2.121839] of_get_named_gpiod_flags exited with status 0 [ 2.131389] ledtrig-cpu: registered to indicate activity on CPUs [ 2.140397] usbcore: registered new interface driver usbhid [ 2.146477] usbhid: USB HID core driver [ 2.154197] oprofile: using arm/armv7 [ 2.159064] TCP: cubic registered [ 2.162572] Initializing XFRM netlink socket [ 2.167432] NET: Registered protocol family 17 [ 2.172233] NET: Registered protocol family 15 [ 2.177491] Key type dns_resolver registered [ 2.185216] ThumbEE CPU extension supported. [ 2.213876] DCDC1: at 1500 mV [ 2.220917] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.229280] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.237618] LDO1: at 1800 mV [ 2.243986] LDO2: at 3300 mV [ 2.249940] LDO3: 1800 <--> 3300 mV at 1800 mV [ 2.257872] LDO4: at 3300 mV [ 2.264412] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.270150] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.277370] of_get_named_gpiod_flags exited with status 0 [ 2.283209] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]' [ 2.292902] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 2.300192] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 2.309326] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 2.433149] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.439592] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.450088] libphy: 4a101000.mdio: probed [ 2.454496] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.467109] Detected MACID = 78:c5:e5:c3:1e:2a [ 2.478668] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.490635] net eth0: initializing cpsw version 1.12 (0) [ 2.498800] net eth0: phy found : id is : 0x7c0f1 [ 2.504040] libphy: PHY 4a101000.mdio:01 not found [ 2.509093] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 5.573682] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 5.593135] Sending DHCP requests ., OK [ 5.613567] IP-Config: Got DHCP answer from 192.168.57.1, my address is 192.168.57.138 [ 5.622588] IP-Config: Complete: [ 5.626114] device=eth0, hwaddr=78:c5:e5:c3:1e:2a, ipaddr=192.168.57.138, mask=255.255.255.0, gw=255.255.255.255 [ 5.637367] host=192.168.57.138, domain=example.org, nis-domain=(none) [ 5.644755] bootserver=0.0.0.0, rootserver=192.168.57.1, rootpath= [ 5.651534] nameserver0=192.168.57.1 [ 5.658480] omap_uart 44e09000.serial: no wakeirq for uart0 [ 5.688719] VFS: Mounted root (nfs filesystem) on device 0:13. [ 5.697348] devtmpfs: mounted [ 5.701540] Freeing unused kernel memory: 384K (c0775000 - c07d5000) [ 6.162555] omap_uart 44e09000.serial: no wakeirq for uart0 [ 6.177306] omap_uart 44e09000.serial: no wakeirq for uart0 INIT: [ 6.203988] omap_uart 44e09000.serial: no wakeirq for uart0 version 2.88 booting[ 6.223949] omap_uart 44e09000.serial: no wakeirq for uart0 [ 6.254609] omap_uart 44e09000.serial: no wakeirq for uart0 [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 8.551726] udevd[729]: starting version 175 [ ok . [....] Synthesizing the initial hotplug events...udevd[768]: error changing net interface name eth0 to eth4: Device or resource busy [ ok done. [....] Waiting for /dev to be fully populated...[ ok done. [....] Activating swap...[ ok done. [ 15.111821] random: nonblocking pool is initialized [....] Cleaning up temporary files... /tmp[ ok . [....] Activating lvm and md swap...[ ok done. [....] Checking file systems...fsck from util-linux 2.20.1 [ ok done. [....] Mounting local filesystems...[ ok done. [....] Activating swapfile swap...[ ok done. [....] Cleaning up temporary files...[ ok . [....] Setting kernel variables ...[ ok done. [....] Configuring network interfaces...[ ok done. [....] Starting rpcbind daemon...rpcbind: cannot create socket for udp6 rpcbind: cannot create socket for tcp6 [ ok . [....] Starting NFS common utilities: statd idmapd[ ok . [....] Cleaning up temporary files...[ ok . [....] Starting network benchmark server[ ok . [ 33.036502] omap_uart 44e09000.serial: no wakeirq for uart0 INIT: [ 33.054043] omap_uart 44e09000.serial: no wakeirq for uart0 Entering runlevel: 2[ 33.073909] omap_uart 44e09000.serial: no wakeirq for uart0 [ 33.105146] omap_uart 44e09000.serial: no wakeirq for uart0 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting network benchmark server[FAIL failed! [....] Starting system message bus: dbus[ ok . [....] Starting rpcbind daemon...[....] Already running.[ ok . [....] Starting NFS common utilities: statd idmapd[ ok . [ 37.431463] omap_uart 44e09000.serial: no wakeirq for uart0 Debian GNU/Linux wheezy/sid armel ttyO0 armel login: