U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete - CRC mode, 7(SOH)/4147(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0040ce2a = 4247082 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4247018 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.13.0-rc4-37220-g319e2e3 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Dec 15 19:57:48 MST 2013 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c0877d00, node_mem_map c0de8000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1601000 s13952 r8192 d14720 u36864 [ 0.000000] pcpu-alloc: s13952 r8192 d14720 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1007736K/1047552K available (5479K kernel code, 660K rwdata, 2128K rodata, 385K init, 5527K bss, 39816K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0775f90 (7608 kB) [ 0.000000] .init : 0xc0776000 - 0xc07d6680 ( 386 kB) [ 0.000000] .data : 0xc07d8000 - 0xc087d140 ( 661 kB) [ 0.000000] .bss : 0xc087d140 - 0xc0de2ff0 (5528 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] smp_twd: clock not found -2 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] Calibrating local timer... 347.44MHz. [ 0.059814] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.149169] pid_max: default: 32768 minimum: 301 [ 0.149719] Security Framework initialized [ 0.149902] Mount-cache hash table entries: 512 [ 0.161132] CPU: Testing write buffer coherency: ok [ 0.162628] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.162689] Setting up static identity map for 0x80531860 - 0x805318d0 [ 0.162780] L310 cache controller enabled [ 0.162811] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB [ 0.167877] CPU1: Booted secondary processor [ 0.198791] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.199401] Brought up 2 CPUs [ 0.199432] SMP: Total of 2 processors activated. [ 0.199432] CPU: All CPU(s) started in SVC mode. [ 0.202178] devtmpfs: initialized [ 0.210906] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.212310] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.213500] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.300048] pinctrl core: initialized pinctrl subsystem [ 0.303253] regulator-dummy: no parameters [ 0.306091] NET: Registered protocol family 16 [ 0.312774] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.386413] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.387542] OMAP GPIO hardware version 0.1 [ 0.389282] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.391662] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.393798] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.395935] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.398406] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.400085] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.425842] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.426605] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.427917] No ATAGs? [ 0.427947] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.427947] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.431549] OMAP DMA hardware revision 0.0 [ 0.481292] bio: create slab at 0 [ 0.484222] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.484283] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.541931] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.542907] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.543609] VDD_ETH: 3300 mV [ 0.550903] SCSI subsystem initialized [ 0.552520] usbcore: registered new interface driver usbfs [ 0.552886] usbcore: registered new interface driver hub [ 0.553344] usbcore: registered new device driver usb [ 0.558715] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.559722] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.561340] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.562194] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.568481] Switched to clocksource 32k_counter [ 0.693206] NET: Registered protocol family 2 [ 0.695037] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.695281] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.697967] TCP: Hash tables configured (established 8192 bind 8192) [ 0.698211] TCP: reno registered [ 0.698242] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.698913] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.700195] NET: Registered protocol family 1 [ 0.701477] RPC: Registered named UNIX socket transport module. [ 0.701477] RPC: Registered udp transport module. [ 0.701507] RPC: Registered tcp transport module. [ 0.701507] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.871368] bounce pool size: 64 pages [ 0.872497] VFS: Disk quotas dquot_6.5.2 [ 0.872741] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.874999] NFS: Registering the id_resolver key type [ 0.875396] Key type id_resolver registered [ 0.875427] Key type id_legacy registered [ 0.875518] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.876068] msgmni has been set to 1474 [ 0.879547] io scheduler noop registered [ 0.879577] io scheduler deadline registered [ 0.879669] io scheduler cfq registered (default) [ 0.884979] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.885467] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.888854] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.894653] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.895568] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.897308] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 0.897674] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.898895] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 0.899230] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.726104] console [ttyO2] enabled [ 1.731323] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.741302] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.775054] brd: module loaded [ 1.792022] loop: module loaded [ 1.797668] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.807891] twl 0-0048: PIH (irq 39) nested IRQs [ 1.815673] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.823486] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.830871] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.838012] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.844726] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.851318] VUSIM: 1200 <--> 2900 mV [ 1.856750] VDAC: 1800 mV [ 1.860931] VANA: 2100 mV [ 1.865447] VCXIO: 1800 mV [ 1.869781] VUSB: 3300 mV [ 1.874481] V1V8: 1800 mV [ 1.879119] V2V1: 2100 mV [ 1.889404] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.899597] omap-dma-engine 4a056000.dma-controller: allocating channel for 36 [ 1.907257] omap-dma-engine 4a056000.dma-controller: allocating channel for 35 [ 1.920989] ks8851 spi1.0: message enable is 0 [ 1.932006] ks8851 spi1.0 eth0: revision 1, MAC 7a:a6:a6:56:57:32, IRQ 331, no EEPROM [ 1.943603] usbcore: registered new interface driver asix [ 1.949615] usbcore: registered new interface driver ax88179_178a [ 1.956329] usbcore: registered new interface driver cdc_ether [ 1.962799] usbcore: registered new interface driver r815x [ 1.968933] usbcore: registered new interface driver smsc95xx [ 1.975250] usbcore: registered new interface driver net1080 [ 1.981536] usbcore: registered new interface driver cdc_subset [ 1.988037] usbcore: registered new interface driver zaurus [ 1.994262] usbcore: registered new interface driver cdc_ncm [ 2.001647] usbcore: registered new interface driver cdc_wdm [ 2.007934] usbcore: registered new interface driver usb-storage [ 2.014617] usbcore: registered new interface driver usbtest [ 2.022583] mousedev: PS/2 mouse device common for all mice [ 2.033203] twl_rtc rtc.5: Power up reset detected. [ 2.039398] twl_rtc rtc.5: Enabling TWL-RTC [ 2.048065] twl_rtc rtc.5: rtc core: registered rtc.5 as rtc0 [ 2.054718] i2c /dev entries driver [ 2.061859] Driver for 1-wire Dallas network protocol. [ 2.068664] ti-soc-thermal 4a002260.bandgap: failed to request fclock reference [ 2.076385] ti-soc-thermal: probe of 4a002260.bandgap failed with error -2 [ 2.086547] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.096160] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.105346] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.114807] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.122467] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.130554] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.137939] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.178527] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.187988] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.197448] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 2.205108] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.212768] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.219787] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.227142] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.234100] omap_hsmmc 480d5000.mmc: pins are not configured from the driver [ 2.242980] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.266479] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.277282] mmc0: new high speed SDHC card at address 0007 [ 2.284912] isa bounce pool size: 16 pages [ 2.289916] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.290039] ledtrig-cpu: registered to indicate activity on CPUs [ 2.291168] usbcore: registered new interface driver usbhid [ 2.291168] usbhid: USB HID core driver [ 2.293121] oprofile: no performance counters [ 2.294586] oprofile: using timer interrupt. [ 2.320495] TCP: cubic registered [ 2.323974] Initializing XFRM netlink socket [ 2.325469] mmcblk0: p1 p2 [ 2.331512] NET: Registered protocol family 17 [ 2.336242] NET: Registered protocol family 15 [ 2.341247] Key type dns_resolver registered [ 2.347229] Power Management for TI OMAP4+ devices. [ 2.352478] Power Management for TI OMAP4. [ 2.356781] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.364013] ThumbEE CPU extension supported. [ 2.372711] VUSB: disabling [ 2.376373] VANA: disabling [ 2.380065] VDAC: disabling [ 2.385650] VAUX1_6030: disabling [ 2.393951] twl_rtc rtc.5: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.402557] omap_uart 48020000.serial: no wakeirq for uart2 [ 2.414794] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.428100] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 2.472930] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.485412] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 6.598632] EXT4-fs (mmcblk0p2): recovery complete [ 6.914764] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.923400] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 6.940460] devtmpfs: mounted [ 6.940460] Freeing unused kernel memory: 384K (c0776000 - c07d6000) [ 7.499420] random: init urandom read with 93 bits of entropy available [ 7.528717] init: Failed to create pty - disabling logging for job [ 7.537292] init: Temporary process spawn error: No space left on device [ 7.606597] init: Failed to create pty - disabling logging for job [ 7.614776] init: Temporary process spawn error: No space left on device [ 7.650177] init: Failed to create pty - disabling logging for job [ 7.656738] init: Temporary process spawn error: No space left on device [ 7.669982] init: Failed to create pty - disabling logging for job [ 7.670959] init: Temporary process spawn error: No space left on device [ 7.840393] init: ureadahead main process (790) terminated with status 5 [ 7.908843] omap_uart 48020000.serial: no wakeirq for uart2 [ 8.256835] random: nonblocking pool is initialized [ 8.302764] init: Failed to create pty - disabling logging for job [ 8.311462] init: Temporary process spawn error: No space left on device [ 8.368438] init: Failed to create pty - disabling logging for job [ 8.376586] init: Temporary process spawn error: No space left on device [ 8.500152] init: Failed to create pty - disabling logging for job [ 8.508819] init: Temporary process spawn error: No space left on device [ 9.484161] udevd[848]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk0p2: clean, 177208/963584 files, 2986975/7708672 blocks [ 12.502563] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 12.519500] init: udev-fallback-graphics main process (1538) terminated with status 1 [ 12.824737] init: plymouth main process (792) killed by SEGV signal [ 12.840789] init: plymouth-splash main process (1546) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 13.295043] init: plymouth-log main process (1598) terminated with status 1 [ 14.128448] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected [ 14.164733] init: failsafe main process (1599) killed by TERM signal from Plymouth [ 14.914703] init: plymouth-upstart-bridge main process (1641) terminated with status 1 [ 15.168823] omap_uart 48020000.serial: no wakeirq for uart2 speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 16.752410] init: alsa-restore main process (1684) terminated with status 19 [ 16.769348] init: hybrid-gfx main process (1699) terminated with status 1 [ 17.388336] init: bluetooth main process (1683) terminated with status 1 [ 17.401336] init: bluetooth main process ended, respawning FATAL: Could not load /lib/modules/3.13.0-rc4-37220-g319e2e3/modules.dep: No such file or directory [ 18.784912] init: bluetooth main process (1803) terminated with status 1 [ 18.793304] init: bluetooth main process ended, respawning [ 18.955017] init: bluetooth main process (1834) terminated with status 1 [ 18.962249] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: