U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete - CRC mode, 5(SOH)/4208(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0041c10b = 4309259 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4309195 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.0-rc1-49348-g38dbfb5 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Feb 10 03:59:22 MST 2014 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c088a240, node_mem_map edff2000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edfb9000 s14016 r8192 d14656 u36864 [ 0.000000] pcpu-alloc: s14016 r8192 d14656 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1007596K/1047552K available (5561K kernel code, 654K rwdata, 2128K rodata, 385K init, 5518K bss, 39956K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc078a8dc (7691 kB) [ 0.000000] .init : 0xc078b000 - 0xc07eb6c0 ( 386 kB) [ 0.000000] .data : 0xc07ec000 - 0xc088f818 ( 655 kB) [ 0.000000] .bss : 0xc088f818 - 0xc0df33b8 (5519 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 392.602325] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000152] smp_twd: clock not found -2 [ 0.001525] Console: colour dummy device 80x30 [ 0.001586] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001617] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001617] ... MAX_LOCK_DEPTH: 48 [ 0.001617] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001647] ... CLASSHASH_SIZE: 4096 [ 0.001647] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.001647] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.001647] ... CHAINHASH_SIZE: 16384 [ 0.001678] memory used by lock dependency info: 3695 kB [ 0.001678] per task-struct memory footprint: 1152 bytes [ 0.001739] Calibrating local timer... 347.61MHz. [ 0.058685] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.148040] pid_max: default: 32768 minimum: 301 [ 0.148590] Security Framework initialized [ 0.148773] Mount-cache hash table entries: 512 [ 0.178222] CPU: Testing write buffer coherency: ok [ 0.179748] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.179809] Setting up static identity map for 0x80545760 - 0x805457d0 [ 0.179901] L310 cache controller enabled [ 0.179931] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB [ 0.184936] CPU1: Booted secondary processor [ 0.217590] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.218170] Brought up 2 CPUs [ 0.218200] SMP: Total of 2 processors activated. [ 0.218200] CPU: All CPU(s) started in SVC mode. [ 0.220947] devtmpfs: initialized [ 0.230133] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.234100] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.237854] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.400238] pinctrl core: initialized pinctrl subsystem [ 0.403808] regulator-dummy: no parameters [ 0.406738] NET: Registered protocol family 16 [ 0.413879] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.493560] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.494628] OMAP GPIO hardware version 0.1 [ 0.496429] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.498657] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.500885] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.503173] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.505462] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.507324] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.534545] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.535186] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.536560] No ATAGs? [ 0.536590] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.536590] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.540222] OMAP DMA hardware revision 0.0 [ 0.588928] bio: create slab at 0 [ 0.591827] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.591857] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.655212] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.656188] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.657012] VDD_ETH: 3300 mV [ 0.663208] SCSI subsystem initialized [ 0.665130] usbcore: registered new interface driver usbfs [ 0.665496] usbcore: registered new interface driver hub [ 0.665954] usbcore: registered new device driver usb [ 0.670959] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.672637] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.674407] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.675384] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.681945] Switched to clocksource 32k_counter [ 0.831634] NET: Registered protocol family 2 [ 0.833435] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.833679] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.836364] TCP: Hash tables configured (established 8192 bind 8192) [ 0.836578] TCP: reno registered [ 0.836639] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.837005] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.838348] NET: Registered protocol family 1 [ 0.839752] RPC: Registered named UNIX socket transport module. [ 0.839752] RPC: Registered udp transport module. [ 0.839782] RPC: Registered tcp transport module. [ 0.839782] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.847869] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.007354] bounce pool size: 64 pages [ 1.008300] VFS: Disk quotas dquot_6.5.2 [ 1.008544] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.010620] NFS: Registering the id_resolver key type [ 1.010986] Key type id_resolver registered [ 1.011016] Key type id_legacy registered [ 1.011108] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.011627] msgmni has been set to 1473 [ 1.015106] io scheduler noop registered [ 1.015136] io scheduler deadline registered [ 1.015228] io scheduler cfq registered (default) [ 1.020690] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 1.021209] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 1.024749] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.031005] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 1.032043] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 1.033752] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 1.034149] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 1.035430] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 1.035827] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.883392] console [ttyO2] enabled [ 1.888366] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.898651] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.936645] brd: module loaded [ 1.955963] loop: module loaded [ 1.962005] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.972167] twl 0-0048: PIH (irq 39) nested IRQs [ 1.980072] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.987457] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.994781] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 2.002166] VMMC: 1200 <--> 3000 mV at 3000 mV [ 2.008972] VPP: 1800 <--> 2500 mV at 1900 mV [ 2.016082] VUSIM: 1200 <--> 2900 mV [ 2.021636] VDAC: 1800 mV [ 2.025970] VANA: 2100 mV [ 2.030731] VCXIO: 1800 mV [ 2.035125] VUSB: 3300 mV [ 2.039855] V1V8: 1800 mV [ 2.044677] V2V1: 2100 mV [ 2.055389] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.072723] ks8851 spi1.0: message enable is 0 [ 2.083953] ks8851 spi1.0 eth0: revision 1, MAC 0e:8a:ba:e7:b7:3c, IRQ 331, no EEPROM [ 2.095794] usbcore: registered new interface driver asix [ 2.101806] usbcore: registered new interface driver ax88179_178a [ 2.108551] usbcore: registered new interface driver cdc_ether [ 2.115020] usbcore: registered new interface driver r815x [ 2.121154] usbcore: registered new interface driver smsc95xx [ 2.127563] usbcore: registered new interface driver net1080 [ 2.133880] usbcore: registered new interface driver cdc_subset [ 2.140411] usbcore: registered new interface driver zaurus [ 2.146697] usbcore: registered new interface driver cdc_ncm [ 2.154174] usbcore: registered new interface driver cdc_wdm [ 2.160491] usbcore: registered new interface driver usb-storage [ 2.167236] usbcore: registered new interface driver usbtest [ 2.176513] mousedev: PS/2 mouse device common for all mice [ 2.186737] twl_rtc rtc.5: Power up reset detected. [ 2.192810] twl_rtc rtc.5: Enabling TWL-RTC [ 2.201568] twl_rtc rtc.5: rtc core: registered rtc.5 as rtc0 [ 2.208129] i2c /dev entries driver [ 2.215545] Driver for 1-wire Dallas network protocol. [ 2.225738] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.235534] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.244689] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.254821] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.262207] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.302124] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.311248] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.320678] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.327758] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.335083] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.339935] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.342163] mmc0: new high speed SDHC card at address 0007 [ 2.344512] isa bounce pool size: 16 pages [ 2.344909] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.365142] omap_hsmmc 480d5000.mmc: pins are not configured from the driver [ 2.375122] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.376647] mmcblk0: p1 p2 [ 2.446746] usbcore: registered new interface driver usbhid [ 2.452667] usbhid: USB HID core driver [ 2.458831] oprofile: no performance counters [ 2.464996] oprofile: using timer interrupt. [ 2.470123] TCP: cubic registered [ 2.473754] Initializing XFRM netlink socket [ 2.478393] NET: Registered protocol family 17 [ 2.483123] NET: Registered protocol family 15 [ 2.488098] Key type dns_resolver registered [ 2.494262] Power Management for TI OMAP4+ devices. [ 2.499420] Power Management for TI OMAP4. [ 2.503784] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.510986] ThumbEE CPU extension supported. [ 2.519714] VUSB: disabling [ 2.523376] VANA: disabling [ 2.526916] VDAC: disabling [ 2.532440] VAUX1_6030: disabling [ 2.540222] twl_rtc rtc.5: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.586364] omap_uart 48020000.serial: no wakeirq for uart2 [ 2.598022] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.610961] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 2.651916] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.661529] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 6.621978] EXT4-fs (mmcblk0p2): recovery complete [ 6.640197] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.648864] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 6.665954] devtmpfs: mounted [ 6.665954] Freeing unused kernel memory: 384K (c078b000 - c07eb000) [ 7.219177] random: init urandom read with 88 bits of entropy available [ 7.252166] init: Failed to create pty - disabling logging for job [ 7.252166] init: Temporary process spawn error: No space left on device [ 7.329193] init: Failed to create pty - disabling logging for job [ 7.336029] init: Temporary process spawn error: No space left on device [ 7.369689] init: Failed to create pty - disabling logging for job [ 7.377960] init: Temporary process spawn error: No space left on device [ 7.388183] init: Failed to create pty - disabling logging for job [ 7.396484] init: Temporary process spawn error: No space left on device [ 7.574249] init: ureadahead main process (795) terminated with status 5 [ 7.649505] omap_uart 48020000.serial: no wakeirq for uart2 [ 8.022521] init: Failed to create pty - disabling logging for job [ 8.023132] init: Temporary process spawn error: No space left on device [ 8.071899] init: Failed to create pty - disabling logging for job [ 8.079223] init: Temporary process spawn error: No space left on device [ 8.202239] init: Failed to create pty - disabling logging for job [ 8.203033] init: Temporary process spawn error: No space left on device [ 8.304168] random: nonblocking pool is initialized [ 8.861083] udevd[853]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk0p2: clean, 177293/963584 files, 2989148/7708672 blocks [ 12.048675] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 12.539581] init: udev-fallback-graphics main process (1582) terminated with status 1 [ 12.873962] init: plymouth main process (797) killed by SEGV signal [ 12.888946] init: plymouth-splash main process (1595) terminated with status 2 [ 13.108520] init: plymouth-log main process (1630) terminated with status 1 [ 13.146850] init: failsafe main process (1632) killed by TERM signal [ 13.972229] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 14.108978] init: plymouth-upstart-bridge main process (1673) terminated with status 1 [ 14.380950] omap_uart 48020000.serial: no wakeirq for uart2 speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 15.092956] init: bluetooth main process (1700) terminated with status 1 [ 15.097686] init: bluetooth main process ended, respawning [ 15.346191] init: alsa-restore main process (1728) terminated with status 19 [ 15.366973] init: hybrid-gfx main process (1740) terminated with status 1 FATAL: Could not load /lib/modules/3.14.0-rc1-49348-g38dbfb5/modules.dep: No such file or directory [ 16.006927] init: bluetooth main process (1815) terminated with status 1 [ 16.014739] init: bluetooth main process ended, respawning [ 16.196044] init: bluetooth main process (1842) terminated with status 1 [ 16.204101] init: bluetooth main process ended, respawning [ 16.386566] init: bluetooth main process (1865) terminated with status 1 [ 16.394134] init: bluetooth main process ended, respawning [ 16.587524] init: bluetooth main process (1888) terminated with status 1 [ 16.595916] init: bluetooth main process ended, respawning [ 16.757934] init: bluetooth main process (1912) terminated with status 1 [ 16.767669] init: bluetooth main process ended, respawning [ 16.926788] init: bluetooth main process (1935) terminated with status 1 [ 16.934417] init: bluetooth main process ended, respawning [ 17.118072] init: bluetooth main process (1958) terminated with status 1 [ 17.129882] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 17.353942] init: bluetooth main process (1986) terminated with status 1 [ 17.362152] init: bluetooth main process ended, respawning [ 17.523803] init: bluetooth main process (2011) terminated with status 1 [ 17.531188] init: bluetooth main process ended, respawning