U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete m - CRC mode, 4(SOH)/4210(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0041c8db = 4311259 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4311195 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.0-rc4-50500-gcfbf8d4 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Feb 24 10:31:21 MST 2014 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c088a300, node_mem_map edff2000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edfb9000 s14016 r8192 d14656 u36864 [ 0.000000] pcpu-alloc: s14016 r8192 d14656 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1007596K/1047552K available (5561K kernel code, 654K rwdata, 2128K rodata, 385K init, 5518K bss, 39956K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc078a904 (7691 kB) [ 0.000000] .init : 0xc078b000 - 0xc07eb6c0 ( 386 kB) [ 0.000000] .data : 0xc07ec000 - 0xc088f8d8 ( 655 kB) [ 0.000000] .bss : 0xc088f8d8 - 0xc0df3478 (5519 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000183] smp_twd: clock not found -2 [ 0.002044] Console: colour dummy device 80x30 [ 0.002136] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002136] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002136] ... MAX_LOCK_DEPTH: 48 [ 0.002166] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002166] ... CLASSHASH_SIZE: 4096 [ 0.002166] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.002197] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.002197] ... CHAINHASH_SIZE: 16384 [ 0.002197] memory used by lock dependency info: 3695 kB [ 0.002197] per task-struct memory footprint: 1152 bytes [ 0.002258] Calibrating local timer... 347.63MHz. [ 0.058746] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.148101] pid_max: default: 32768 minimum: 301 [ 0.148651] Security Framework initialized [ 0.148803] Mount-cache hash table entries: 512 [ 0.178649] CPU: Testing write buffer coherency: ok [ 0.180145] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.180206] Setting up static identity map for 0x80545f20 - 0x80545f90 [ 0.180328] L310 cache controller enabled [ 0.180358] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB [ 0.185272] CPU1: Booted secondary processor [ 0.217651] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.218231] Brought up 2 CPUs [ 0.218261] SMP: Total of 2 processors activated. [ 0.218261] CPU: All CPU(s) started in SVC mode. [ 0.220977] devtmpfs: initialized [ 0.230285] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.234161] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.237792] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.396820] pinctrl core: initialized pinctrl subsystem [ 0.400177] regulator-dummy: no parameters [ 0.403076] NET: Registered protocol family 16 [ 0.410034] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.489227] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.490295] OMAP GPIO hardware version 0.1 [ 0.492034] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.494262] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.496582] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.498870] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.501129] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.502868] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.530090] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.530700] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.532073] No ATAGs? [ 0.532104] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.532135] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.535919] OMAP DMA hardware revision 0.0 [ 0.584381] bio: create slab at 0 [ 0.587219] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.587280] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.649627] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.650665] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.651489] VDD_ETH: 3300 mV [ 0.658599] SCSI subsystem initialized [ 0.660491] usbcore: registered new interface driver usbfs [ 0.660858] usbcore: registered new interface driver hub [ 0.661346] usbcore: registered new device driver usb [ 0.666503] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.667602] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.669342] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.670257] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.677429] Switched to clocksource 32k_counter [ 0.824096] NET: Registered protocol family 2 [ 0.825836] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.826080] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.828826] TCP: Hash tables configured (established 8192 bind 8192) [ 0.829040] TCP: reno registered [ 0.829071] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.829437] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.830780] NET: Registered protocol family 1 [ 0.832183] RPC: Registered named UNIX socket transport module. [ 0.832214] RPC: Registered udp transport module. [ 0.832214] RPC: Registered tcp transport module. [ 0.832214] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.840454] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.999145] bounce pool size: 64 pages [ 1.000091] VFS: Disk quotas dquot_6.5.2 [ 1.000335] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.002410] NFS: Registering the id_resolver key type [ 1.002777] Key type id_resolver registered [ 1.002777] Key type id_legacy registered [ 1.002899] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.003417] msgmni has been set to 1473 [ 1.006286] io scheduler noop registered [ 1.006317] io scheduler deadline registered [ 1.006408] io scheduler cfq registered (default) [ 1.012237] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 1.012725] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 1.016326] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.022979] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.022979] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 1.023895] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 1.025665] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.025695] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 1.026092] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 1.027282] omap_uart 48020000.serial: no wakeirq for uart0 [ 1.027404] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 1.027801] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.893493] console [ttyO2] enabled [ 1.898559] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.904418] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.914428] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.952484] brd: module loaded [ 1.971435] loop: module loaded [ 1.977447] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.987609] twl 0-0048: PIH (irq 39) nested IRQs [ 1.995544] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 2.003387] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 2.010681] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 2.018066] VMMC: 1200 <--> 3000 mV at 3000 mV [ 2.024871] VPP: 1800 <--> 2500 mV at 1900 mV [ 2.031677] VUSIM: 1200 <--> 2900 mV [ 2.037353] VDAC: 1800 mV [ 2.041687] VANA: 2100 mV [ 2.046447] VCXIO: 1800 mV [ 2.050872] VUSB: 3300 mV [ 2.055633] V1V8: 1800 mV [ 2.060363] V2V1: 2100 mV [ 2.071197] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.088134] ks8851 spi1.0: message enable is 0 [ 2.099456] ks8851 spi1.0 eth0: revision 1, MAC 32:4a:1f:79:f1:5a, IRQ 331, no EEPROM [ 2.111358] usbcore: registered new interface driver asix [ 2.117462] usbcore: registered new interface driver ax88179_178a [ 2.124176] usbcore: registered new interface driver cdc_ether [ 2.130676] usbcore: registered new interface driver r815x [ 2.136779] usbcore: registered new interface driver smsc95xx [ 2.143218] usbcore: registered new interface driver net1080 [ 2.149505] usbcore: registered new interface driver cdc_subset [ 2.156066] usbcore: registered new interface driver zaurus [ 2.162322] usbcore: registered new interface driver cdc_ncm [ 2.169799] usbcore: registered new interface driver cdc_wdm [ 2.176116] usbcore: registered new interface driver usb-storage [ 2.182861] usbcore: registered new interface driver usbtest [ 2.192169] mousedev: PS/2 mouse device common for all mice [ 2.202484] twl_rtc rtc.5: Power up reset detected. [ 2.208526] twl_rtc rtc.5: Enabling TWL-RTC [ 2.217315] twl_rtc rtc.5: rtc core: registered rtc.5 as rtc0 [ 2.223846] i2c /dev entries driver [ 2.231262] Driver for 1-wire Dallas network protocol. [ 2.241638] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.251495] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.260681] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.270843] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.278228] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.317535] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.326690] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.336120] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.343170] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.350494] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.355346] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.357574] mmc0: new high speed SDHC card at address 0007 [ 2.360168] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.376281] omap_hsmmc 480d5000.mmc: pins are not configured from the driver [ 2.381835] mmcblk0: p1 p2 [ 2.387207] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.432342] usbcore: registered new interface driver usbhid [ 2.438262] usbhid: USB HID core driver [ 2.444458] oprofile: no performance counters [ 2.450866] oprofile: using timer interrupt. [ 2.455932] TCP: cubic registered [ 2.459472] Initializing XFRM netlink socket [ 2.464050] NET: Registered protocol family 17 [ 2.468811] NET: Registered protocol family 15 [ 2.473754] Key type dns_resolver registered [ 2.479858] Power Management for TI OMAP4+ devices. [ 2.485046] Power Management for TI OMAP4. [ 2.489379] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.496582] ThumbEE CPU extension supported. [ 2.505340] VUSB: disabling [ 2.509033] VANA: disabling [ 2.512664] VDAC: disabling [ 2.518157] VAUX1_6030: disabling [ 2.525970] twl_rtc rtc.5: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.576599] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.589447] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 2.627899] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.640411] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.749237] EXT4-fs (mmcblk0p2): recovery complete [ 4.768920] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.777801] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.794281] devtmpfs: mounted [ 4.794281] Freeing unused kernel memory: 384K (c078b000 - c07eb000) [ 5.337432] random: init urandom read with 60 bits of entropy available [ 5.367462] init: Failed to create pty - disabling logging for job [ 5.377410] init: Temporary process spawn error: No space left on device [ 5.445343] init: Failed to create pty - disabling logging for job [ 5.452178] init: Temporary process spawn error: No space left on device [ 5.485198] init: Failed to create pty - disabling logging for job [ 5.493194] init: Temporary process spawn error: No space left on device [ 5.503601] init: Failed to create pty - disabling logging for job [ 5.511901] init: Temporary process spawn error: No space left on device [ 5.689819] init: ureadahead main process (795) terminated with status 5 [ 6.110260] init: Failed to create pty - disabling logging for job [ 6.118469] init: Temporary process spawn error: No space left on device [ 6.159698] init: Failed to create pty - disabling logging for job [ 6.159698] init: Temporary process spawn error: No space left on device [ 6.287902] init: Failed to create pty - disabling logging for job [ 6.287902] init: Temporary process spawn error: No space left on device [ 7.101196] udevd[853]: starting version 175 [ 8.157348] random: nonblocking pool is initialized fsck from util-linux 2.20.1 [ 10.299163] init: udev-fallback-graphics main process (1543) terminated with status 1 /dev/mmcblk0p2: clean, 177303/963584 files, 2980790/7708672 blocks [ 10.560058] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 10.621337] init: plymouth main process (797) killed by SEGV signal [ 10.629699] init: plymouth-splash main process (1548) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 11.181274] init: plymouth-log main process (1610) terminated with status 1 [ 11.265411] init: failsafe main process (1612) killed by TERM signal [ 12.011932] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS [ 12.252929] init: plymouth-upstart-bridge main process (1661) terminated with status 1 speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 13.159057] init: alsa-restore main process (1694) terminated with status 19 [ 13.174926] init: hybrid-gfx main process (1706) terminated with status 1 FATAL: Could not load /lib/modules/3.14.0-rc4-50500-gcfbf8d4/modules.dep: No such file or directory [ 13.638336] init: bluetooth main process (1682) terminated with status 1 [ 13.651855] init: bluetooth main process ended, respawning [ 14.026672] init: bluetooth main process (1797) terminated with status 1 [ 14.034790] init: bluetooth main process ended, respawning [ 14.194702] init: bluetooth main process (1821) terminated with status 1 [ 14.202270] init: bluetooth main process ended, respawning [ 14.365600] init: bluetooth main process (1844) terminated with status 1 [ 14.373931] init: bluetooth main process ended, respawning [ 14.550018] init: bluetooth main process (1867) terminated with status 1 [ 14.557250] init: bluetooth main process ended, respawning [ 15.012969] init: bluetooth main process (1894) terminated with status 1 [ 15.021087] init: bluetooth main process ended, respawning [ 15.220458] init: bluetooth main process (1923) terminated with status 1 [ 15.230651] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 15.448425] init: bluetooth main process (1947) terminated with status 1 [ 15.455810] init: bluetooth main process ended, respawning [ 15.645812] init: bluetooth main process (1978) terminated with status 1 [ 15.654602] init: bluetooth main process ended, respawning