U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete - CRC mode, 9(SOH)/4210(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0041cb03 = 4311811 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4311747 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.0-51396-g455c6fd (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Apr 2 00:50:01 MDT 2014 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c088c240, node_mem_map edff2000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edfb9000 s14016 r8192 d14656 u36864 [ 0.000000] pcpu-alloc: s14016 r8192 d14656 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1007588K/1047552K available (5565K kernel code, 654K rwdata, 2128K rodata, 385K init, 5518K bss, 39964K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc078b9e4 (7695 kB) [ 0.000000] .init : 0xc078c000 - 0xc07ec6c0 ( 386 kB) [ 0.000000] .data : 0xc07ee000 - 0xc0891818 ( 655 kB) [ 0.000000] .bss : 0xc0891818 - 0xc0df5338 (5519 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000183] smp_twd: clock not found -2 [ 0.002044] Console: colour dummy device 80x30 [ 0.002136] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002136] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002136] ... MAX_LOCK_DEPTH: 48 [ 0.002166] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002166] ... CLASSHASH_SIZE: 4096 [ 0.002166] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.002197] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.002197] ... CHAINHASH_SIZE: 16384 [ 0.002197] memory used by lock dependency info: 3695 kB [ 0.002197] per task-struct memory footprint: 1152 bytes [ 0.002288] Calibrating local timer... 347.52MHz. [ 0.058746] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.148071] pid_max: default: 32768 minimum: 301 [ 0.148681] Security Framework initialized [ 0.148864] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.148864] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.179351] CPU: Testing write buffer coherency: ok [ 0.180847] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.180908] Setting up static identity map for 0x80546a60 - 0x80546ad0 [ 0.181030] L310 cache controller enabled [ 0.181060] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB [ 0.186035] CPU1: Booted secondary processor [ 0.217590] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.218200] Brought up 2 CPUs [ 0.218231] SMP: Total of 2 processors activated. [ 0.218231] CPU: All CPU(s) started in SVC mode. [ 0.220977] devtmpfs: initialized [ 0.230468] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.234436] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.238159] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.399810] pinctrl core: initialized pinctrl subsystem [ 0.403198] regulator-dummy: no parameters [ 0.406097] NET: Registered protocol family 16 [ 0.412933] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.494567] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.495758] OMAP GPIO hardware version 0.1 [ 0.497589] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.499877] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.502197] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.504608] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.506988] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.508819] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.536437] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.537078] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.538482] No ATAGs? [ 0.538513] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.538543] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.542205] OMAP DMA hardware revision 0.0 [ 0.591918] bio: create slab at 0 [ 0.594787] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.594818] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.658660] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.659698] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.660522] VDD_ETH: 3300 mV [ 0.668365] SCSI subsystem initialized [ 0.670288] usbcore: registered new interface driver usbfs [ 0.670684] usbcore: registered new interface driver hub [ 0.671142] usbcore: registered new device driver usb [ 0.676391] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.677459] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.679260] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.680175] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.687194] Switched to clocksource 32k_counter [ 0.836914] NET: Registered protocol family 2 [ 0.838745] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.838989] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.841674] TCP: Hash tables configured (established 8192 bind 8192) [ 0.841888] TCP: reno registered [ 0.841918] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.842285] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.843597] NET: Registered protocol family 1 [ 0.845031] RPC: Registered named UNIX socket transport module. [ 0.845062] RPC: Registered udp transport module. [ 0.845062] RPC: Registered tcp transport module. [ 0.845092] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.853393] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.012207] bounce pool size: 64 pages [ 1.013244] VFS: Disk quotas dquot_6.5.2 [ 1.013488] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.015533] NFS: Registering the id_resolver key type [ 1.015899] Key type id_resolver registered [ 1.015930] Key type id_legacy registered [ 1.016021] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.016571] msgmni has been set to 1473 [ 1.019836] io scheduler noop registered [ 1.019866] io scheduler deadline registered [ 1.019958] io scheduler cfq registered (default) [ 1.025360] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 1.025817] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 1.029663] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.036163] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.036193] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 1.037200] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 1.038940] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.038940] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 1.039520] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 1.040893] omap_uart 48020000.serial: no wakeirq for uart0 [ 1.040924] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 1.041320] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.917266] console [ttyO2] enabled [ 1.922454] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.928344] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.938293] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.976928] brd: module loaded [ 1.996276] loop: module loaded [ 2.002746] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.012847] twl 0-0048: PIH (irq 39) nested IRQs [ 2.020874] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 2.029296] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 2.036682] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 2.044067] VMMC: 1200 <--> 3000 mV at 3000 mV [ 2.050933] VPP: 1800 <--> 2500 mV at 1900 mV [ 2.057800] VUSIM: 1200 <--> 2900 mV [ 2.063446] VDAC: 1800 mV [ 2.067810] VANA: 2100 mV [ 2.072631] VCXIO: 1800 mV [ 2.077117] VUSB: 3300 mV [ 2.081878] V1V8: 1800 mV [ 2.086639] V2V1: 2100 mV [ 2.097625] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.115112] ks8851 spi1.0: message enable is 0 [ 2.126281] ks8851 spi1.0 eth0: revision 1, MAC 0a:f9:57:2d:a1:ab, IRQ 331, no EEPROM [ 2.138549] usbcore: registered new interface driver asix [ 2.144561] usbcore: registered new interface driver ax88179_178a [ 2.151336] usbcore: registered new interface driver cdc_ether [ 2.157867] usbcore: registered new interface driver smsc95xx [ 2.164245] usbcore: registered new interface driver net1080 [ 2.170532] usbcore: registered new interface driver cdc_subset [ 2.177154] usbcore: registered new interface driver zaurus [ 2.183410] usbcore: registered new interface driver cdc_ncm [ 2.190917] usbcore: registered new interface driver cdc_wdm [ 2.197326] usbcore: registered new interface driver usb-storage [ 2.204010] usbcore: registered new interface driver usbtest [ 2.213439] mousedev: PS/2 mouse device common for all mice [ 2.223937] twl_rtc rtc.5: Power up reset detected. [ 2.230102] twl_rtc rtc.5: Enabling TWL-RTC [ 2.239166] twl_rtc rtc.5: rtc core: registered rtc.5 as rtc0 [ 2.245697] i2c /dev entries driver [ 2.253143] Driver for 1-wire Dallas network protocol. [ 2.263427] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.273345] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.282501] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.292449] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.299774] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.347320] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.356445] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.365905] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.372924] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.380279] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.385101] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.387329] mmc0: new high speed SDHC card at address 0007 [ 2.390106] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.395965] mmcblk0: p1 p2 [ 2.408996] omap_hsmmc 480d5000.mmc: pins are not configured from the driver [ 2.417114] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.462127] usbcore: registered new interface driver usbhid [ 2.468048] usbhid: USB HID core driver [ 2.474273] oprofile: no performance counters [ 2.480682] oprofile: using timer interrupt. [ 2.485778] TCP: cubic registered [ 2.489318] Initializing XFRM netlink socket [ 2.493896] NET: Registered protocol family 17 [ 2.498657] NET: Registered protocol family 15 [ 2.503631] Key type dns_resolver registered [ 2.509857] Power Management for TI OMAP4+ devices. [ 2.515014] Power Management for TI OMAP4. [ 2.519470] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.526672] ThumbEE CPU extension supported. [ 2.535339] VUSB: disabling [ 2.538970] VANA: disabling [ 2.542633] VDAC: disabling [ 2.548156] VAUX1_6030: disabling [ 2.551788] regulator-dummy: disabling [ 2.559997] twl_rtc rtc.5: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.612060] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.624969] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 2.667785] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.667785] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 7.030334] EXT4-fs (mmcblk0p2): recovery complete [ 7.043731] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.052459] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 7.069152] devtmpfs: mounted [ 7.072814] Freeing unused kernel memory: 384K (c078c000 - c07ec000) [ 7.613494] random: init urandom read with 83 bits of entropy available [ 7.645996] init: Failed to create pty - disabling logging for job [ 7.652770] init: Temporary process spawn error: No space left on device [ 7.721466] init: Failed to create pty - disabling logging for job [ 7.728424] init: Temporary process spawn error: No space left on device [ 7.760253] init: Failed to create pty - disabling logging for job [ 7.768218] init: Temporary process spawn error: No space left on device [ 7.778717] init: Failed to create pty - disabling logging for job [ 7.787475] init: Temporary process spawn error: No space left on device [ 7.949310] init: ureadahead main process (794) terminated with status 5 [ 8.368652] init: Failed to create pty - disabling logging for job [ 8.368652] init: Temporary process spawn error: No space left on device [ 8.418548] init: Failed to create pty - disabling logging for job [ 8.418548] init: Temporary process spawn error: No space left on device [ 8.547180] init: Failed to create pty - disabling logging for job [ 8.547698] init: Temporary process spawn error: No space left on device [ 9.251678] random: nonblocking pool is initialized [ 9.514404] udevd[852]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk0p2: clean, 177318/963584 files, 2986087/7708672 blocks [ 12.581054] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 12.639190] init: udev-fallback-graphics main process (1551) terminated with status 1 [ 12.886322] init: plymouth main process (795) killed by SEGV signal [ 12.905090] init: plymouth-splash main process (1561) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 13.364227] init: plymouth-log main process (1609) terminated with status 1 [ 13.458618] init: failsafe main process (1610) killed by TERM signal [ 14.300384] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 14.424621] init: plymouth-upstart-bridge main process (1644) terminated with status 1 speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 16.906372] init: bluetooth main process (1675) terminated with status 1 [ 16.915527] init: bluetooth main process ended, respawning [ 16.938629] init: alsa-restore main process (1721) terminated with status 19 [ 17.040588] init: hybrid-gfx main process (1736) terminated with status 1 [ 17.548828] init: bluetooth main process (1804) terminated with status 1 [ 17.548828] init: bluetooth main process ended, respawning [ 17.927185] init: bluetooth main process (1835) terminated with status 1 [ 17.935119] init: bluetooth main process ended, respawning [ 18.389343] init: bluetooth main process (1874) terminated with status 1 [ 18.397674] init: bluetooth main process ended, respawning FATAL: Could not load /lib/modules/3.14.0-51396-g455c6fd/modules.dep: No such file or directory [ 18.732452] init: bluetooth main process (1903) terminated with status 1 [ 18.739654] init: bluetooth main process ended, respawning [ 18.905242] init: bluetooth main process (1926) terminated with status 1 [ 18.913513] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 19.115051] init: bluetooth main process (1949) terminated with status 1 [ 19.123535] init: bluetooth main process ended, respawning [ 19.308013] init: bluetooth main process (1973) terminated with status 1 [ 19.315765] init: bluetooth main process ended, respawning [ 19.497680] init: bluetooth main process (1996) terminated with status 1 [ 19.505096] init: bluetooth main process ended, respawning [ 19.695343] init: bluetooth main process (2019) terminated with status 1 [ 19.707916] init: bluetooth main process ended, respawning [ 19.908142] init: bluetooth main process (2043) terminated with status 1 [ 19.917907] init: bluetooth respawning too fast, stopped