U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete - CRC mode, 9(SOH)/4234(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00422b39 = 4336441 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4336377 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.15.0-rc3-64976-gd1db0ee (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Apr 27 21:43:52 MDT 2014 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c08966c0, node_mem_map edff2000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edf9f000 s14080 r8192 d14592 u36864 [ 0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1007432K/1047552K available (5576K kernel code, 663K rwdata, 2144K rodata, 389K init, 5523K bss, 40120K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0792328 (7721 kB) [ 0.000000] .init : 0xc0793000 - 0xc07f4700 ( 390 kB) [ 0.000000] .data : 0xc07f6000 - 0xc089bec0 ( 664 kB) [ 0.000000] .bss : 0xc089bec0 - 0xc0e00ad0 (5524 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000183] smp_twd: clock not found -2 [ 0.002105] Console: colour dummy device 80x30 [ 0.002197] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002197] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002197] ... MAX_LOCK_DEPTH: 48 [ 0.002227] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002227] ... CLASSHASH_SIZE: 4096 [ 0.002227] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.002258] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.002258] ... CHAINHASH_SIZE: 16384 [ 0.002258] memory used by lock dependency info: 3695 kB [ 0.002258] per task-struct memory footprint: 1152 bytes [ 0.002319] Calibrating local timer... 347.46MHz. [ 0.058685] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.148010] pid_max: default: 32768 minimum: 301 [ 0.148620] Security Framework initialized [ 0.148803] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.148834] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.151885] CPU: Testing write buffer coherency: ok [ 0.153381] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153442] Setting up static identity map for 0x805483d0 - 0x80548440 [ 0.153564] L310 cache controller enabled [ 0.153594] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB [ 0.158843] CPU1: Booted secondary processor [ 0.197662] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.198272] Brought up 2 CPUs [ 0.198272] SMP: Total of 2 processors activated. [ 0.198303] CPU: All CPU(s) started in SVC mode. [ 0.201049] devtmpfs: initialized [ 0.210418] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.214508] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.218322] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.379669] pinctrl core: initialized pinctrl subsystem [ 0.382263] regulator-dummy: no parameters [ 0.425994] NET: Registered protocol family 16 [ 0.432891] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.507049] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.507873] OMAP GPIO hardware version 0.1 [ 0.508941] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.510589] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.512268] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.513885] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.515472] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.516845] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.534698] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.535125] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.537139] No ATAGs? [ 0.537231] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.537231] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.539825] OMAP DMA hardware revision 0.0 [ 0.562408] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.562469] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.596984] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.597808] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.598449] VDD_ETH: 3300 mV [ 0.602630] SCSI subsystem initialized [ 0.603363] usbcore: registered new interface driver usbfs [ 0.603546] usbcore: registered new interface driver hub [ 0.603820] usbcore: registered new device driver usb [ 0.643524] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.644714] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.646575] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.647338] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.651489] Switched to clocksource 32k_counter [ 0.789154] NET: Registered protocol family 2 [ 0.790954] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.791259] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.794372] TCP: Hash tables configured (established 8192 bind 8192) [ 0.794616] TCP: reno registered [ 0.794647] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.795074] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.796508] NET: Registered protocol family 1 [ 0.797668] RPC: Registered named UNIX socket transport module. [ 0.797668] RPC: Registered udp transport module. [ 0.797698] RPC: Registered tcp transport module. [ 0.797698] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.803710] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.967834] bounce pool size: 64 pages [ 0.968933] VFS: Disk quotas dquot_6.5.2 [ 0.969024] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.971069] NFS: Registering the id_resolver key type [ 0.971527] Key type id_resolver registered [ 0.971557] Key type id_legacy registered [ 0.971649] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.972198] msgmni has been set to 1473 [ 0.974792] io scheduler noop registered [ 0.974822] io scheduler deadline registered [ 0.974914] io scheduler cfq registered (default) [ 0.979095] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.979522] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.981842] pbias_mmc_omap4: 1800 <--> 3000 mV at 3000 mV [ 0.983184] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.988830] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.988861] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.989685] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.991668] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.991699] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 0.992401] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.993530] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.993560] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 0.994079] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.869232] console [ttyO2] enabled [ 1.874145] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.880004] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.889923] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.923553] brd: module loaded [ 1.939361] loop: module loaded [ 1.944519] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.954742] twl 0-0048: PIH (irq 39) nested IRQs [ 1.962493] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.969665] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.976806] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.983978] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.990478] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.997100] VUSIM: 1200 <--> 2900 mV [ 2.002349] VDAC: 1800 mV [ 2.006225] VANA: 2100 mV [ 2.010955] VCXIO: 1800 mV [ 2.015563] VUSB: 3300 mV [ 2.020355] V1V8: 1800 mV [ 2.024963] V2V1: 2100 mV [ 2.032531] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.046569] ks8851 spi1.0: message enable is 0 [ 2.057067] ks8851 spi1.0 eth0: revision 1, MAC be:4f:de:95:69:f7, IRQ 331, no EEPROM [ 2.067413] usbcore: registered new interface driver asix [ 2.073242] usbcore: registered new interface driver ax88179_178a [ 2.079772] usbcore: registered new interface driver cdc_ether [ 2.086090] usbcore: registered new interface driver smsc95xx [ 2.092254] usbcore: registered new interface driver net1080 [ 2.098297] usbcore: registered new interface driver cdc_subset [ 2.104675] usbcore: registered new interface driver zaurus [ 2.110687] usbcore: registered new interface driver cdc_ncm [ 2.117553] usbcore: registered new interface driver cdc_wdm [ 2.123718] usbcore: registered new interface driver usb-storage [ 2.130187] usbcore: registered new interface driver usbtest [ 2.138275] mousedev: PS/2 mouse device common for all mice [ 2.147155] twl_rtc rtc.5: Power up reset detected. [ 2.153198] twl_rtc rtc.5: Enabling TWL-RTC [ 2.161712] twl_rtc rtc.5: rtc core: registered rtc.5 as rtc0 [ 2.167999] i2c /dev entries driver [ 2.174346] Driver for 1-wire Dallas network protocol. [ 2.183227] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.192047] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.201171] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.211364] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.251586] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.260711] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.270172] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.277160] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.284057] omap_hsmmc 480d5000.mmc: pins are not configured from the driver [ 2.289428] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.291656] mmc0: new high speed SDHC card at address 0007 [ 2.293609] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.310729] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.315277] mmcblk0: p1 p2 [ 2.352264] usbcore: registered new interface driver usbhid [ 2.358123] usbhid: USB HID core driver [ 2.363372] oprofile: no performance counters [ 2.368927] oprofile: using timer interrupt. [ 2.373931] TCP: cubic registered [ 2.377410] Initializing XFRM netlink socket [ 2.382049] NET: Registered protocol family 17 [ 2.386749] NET: Registered protocol family 15 [ 2.391723] Key type dns_resolver registered [ 2.397369] Power Management for TI OMAP4+ devices. [ 2.402587] Power Management for TI OMAP4. [ 2.406890] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.414093] ThumbEE CPU extension supported. [ 2.414093] Registering SWP/SWPB emulation handler [ 2.427459] VUSB: disabling [ 2.431030] VANA: disabling [ 2.434631] VDAC: disabling [ 2.440124] VAUX1_6030: disabling [ 2.447143] twl_rtc rtc.5: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.497528] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.509796] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 2.555450] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.566711] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 5.684875] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [ 5.726165] EXT4-fs (mmcblk0p2): 2 orphan inodes deleted [ 5.731903] EXT4-fs (mmcblk0p2): recovery complete [ 7.299468] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.308197] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 7.319763] devtmpfs: mounted [ 7.323303] Freeing unused kernel memory: 388K (c0793000 - c07f4000) [ 7.876586] random: init urandom read with 105 bits of entropy available [ 7.907897] init: Failed to create pty - disabling logging for job [ 7.914764] init: Temporary process spawn error: No space left on device [ 7.983764] init: Failed to create pty - disabling logging for job [ 7.989746] init: Temporary process spawn error: No space left on device [ 8.019226] init: Failed to create pty - disabling logging for job [ 8.025939] init: Temporary process spawn error: No space left on device [ 8.041137] init: Failed to create pty - disabling logging for job [ 8.047973] init: Temporary process spawn error: No space left on device [ 8.332977] init: ureadahead main process (795) terminated with status 5 [ 8.694732] init: Failed to create pty - disabling logging for job [ 8.702880] init: Temporary process spawn error: No space left on device [ 8.742431] init: Failed to create pty - disabling logging for job [ 8.742431] init: Temporary process spawn error: No space left on device [ 8.827301] random: nonblocking pool is initialized [ 8.874481] init: Failed to create pty - disabling logging for job [ 8.883178] init: Temporary process spawn error: No space left on device [ 9.710174] udevd[853]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk0p2: clean, 177313/963584 files, 2985323/7708672 blocks [ 13.026611] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 13.343597] init: udev-fallback-graphics main process (1611) terminated with status 1 [ 13.583709] init: plymouth main process (796) killed by SEGV signal [ 13.605194] init: plymouth-splash main process (1619) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 13.939636] init: plymouth-log main process (1651) terminated with status 1 [ 13.984344] init: failsafe main process (1653) killed by TERM signal [ 14.851715] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS [ 15.110473] init: plymouth-upstart-bridge main process (1683) terminated with status 1 [ 15.491394] init: bluetooth main process (1698) terminated with status 1 [ 15.499206] init: bluetooth main process ended, respawning [ 15.863739] init: bluetooth main process (1749) terminated with status 1 [ 15.872619] init: bluetooth main process ended, respawning [ 16.079528] init: bluetooth main process (1776) terminated with status 1 [ 16.087402] init: bluetooth main process ended, respawning [ 16.281707] init: bluetooth main process (1799) terminated with status 1 [ 16.288818] init: bluetooth main process ended, respawning speech-dispatcher disabled; edit /etc/default/speech-dispatcher [ 17.234436] init: alsa-restore main process (1840) terminated with status 19 [ 17.255035] init: hybrid-gfx main process (1851) terminated with status 1 saned disabled; edit /etc/default/saned [ 17.405029] init: bluetooth main process (1827) terminated with status 1 [ 17.417358] init: bluetooth main process ended, respawning [ 17.666320] init: bluetooth main process (1914) terminated with status 1 [ 17.674743] init: bluetooth main process ended, respawning [ 17.907409] init: bluetooth main process (1937) terminated with status 1 [ 17.915344] init: bluetooth main process ended, respawning [ 18.128631] init: bluetooth main process (1981) terminated with status 1 [ 18.136352] init: bluetooth main process ended, respawning [ 18.642944] init: bluetooth main process (2005) terminated with status 1 [ 18.650970] init: bluetooth main process ended, respawning [ 18.869262] init: bluetooth main process (2033) terminated with status 1 [ 18.877044] init: bluetooth main process ended, respawning [ 19.040069] init: bluetooth main process (2059) terminated with status 1 [ 19.049804] init: bluetooth respawning too fast, stopped FATAL: Could not load /lib/modules/3.15.0-rc3-64976-gd1db0ee/modules.dep: No such file or directory Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: