U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete m - CRC mode, 4(SOH)/4305(STX)/0(CAN) packets, 3 retries ## Total Size = 0x004344a1 = 4408481 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4408417 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.16.0-rc3-79057-g4c83445 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Jun 30 00:49:39 MDT 2014 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c08be9c0, node_mem_map edff1000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 526 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/mach-omap2/omap4-common.c:192 omap4_l2c310_write_sec+0x5c/0x98() [ 0.000000] OMAP L2C310: ignoring write to reg 0xf80 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.16.0-rc3-79057-g4c83445 #1 [ 0.000000] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.000000] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.000000] [] (dump_stack) from [] (warn_slowpath_common+0x68/0x8c) [ 0.000000] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.000000] [] (warn_slowpath_fmt) from [] (omap4_l2c310_write_sec+0x5c/0x98) [ 0.000000] [] (omap4_l2c310_write_sec) from [] (l2c310_enable+0x13c/0x200) [ 0.000000] [] (l2c310_enable) from [] (__l2c_init+0x168/0x1f0) [ 0.000000] [] (__l2c_init) from [] (l2x0_of_init+0x178/0x1ac) [ 0.000000] [] (l2x0_of_init) from [] (omap_l2_cache_init+0x44/0x9c) [ 0.000000] [] (omap_l2_cache_init) from [] (omap4430_init_early+0x6c/0xa0) [ 0.000000] [] (omap4430_init_early) from [] (setup_arch+0x8b4/0x998) [ 0.000000] [] (setup_arch) from [] (start_kernel+0x7c/0x3a0) [ 0.000000] [] (start_kernel) from [<80008074>] (0x80008074) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edf9e000 s14336 r8192 d14336 u36864 [ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1004584K/1047552K available (5655K kernel code, 680K rwdata, 2196K rodata, 406K init, 8209K bss, 42968K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07b2f5c (7852 kB) [ 0.000000] .init : 0xc07b3000 - 0xc0818800 ( 406 kB) [ 0.000000] .data : 0xc081a000 - 0xc08c4330 ( 681 kB) [ 0.000000] .bss : 0xc08c4330 - 0xc10c8820 (8210 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000122] smp_twd: clock not found -2 [ 0.001678] Console: colour dummy device 80x30 [ 0.001739] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001739] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001770] ... MAX_LOCK_DEPTH: 48 [ 0.001770] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001770] ... CLASSHASH_SIZE: 4096 [ 0.001800] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001800] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001831] ... CHAINHASH_SIZE: 32768 [ 0.001831] memory used by lock dependency info: 5167 kB [ 0.001861] per task-struct memory footprint: 1152 bytes [ 0.001892] Calibrating local timer... 347.69MHz. [ 0.059020] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.148437] pid_max: default: 32768 minimum: 301 [ 0.148895] Security Framework initialized [ 0.149047] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.149047] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.151336] CPU: Testing write buffer coherency: ok [ 0.152435] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152526] Setting up static identity map for 0x8055ba00 - 0x8055ba70 [ 0.158081] CPU1: Booted secondary processor [ 0.188140] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.188720] Brought up 2 CPUs [ 0.188751] SMP: Total of 2 processors activated. [ 0.188751] CPU: All CPU(s) started in SVC mode. [ 0.191406] devtmpfs: initialized [ 0.200866] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.204895] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.208709] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.368164] pinctrl core: initialized pinctrl subsystem [ 0.370697] regulator-dummy: no parameters [ 0.413391] NET: Registered protocol family 16 [ 0.419433] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.421508] cpuidle: using governor ladder [ 0.421569] cpuidle: using governor menu [ 0.434997] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.435821] OMAP GPIO hardware version 0.1 [ 0.436981] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.438690] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.440307] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.441894] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.443511] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.444824] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.462707] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.463226] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.465240] No ATAGs? [ 0.465362] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.465393] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.467895] OMAP DMA hardware revision 0.0 [ 0.522094] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.522155] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.556243] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.557067] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.557739] VDD_ETH: 3300 mV [ 0.562133] SCSI subsystem initialized [ 0.562896] usbcore: registered new interface driver usbfs [ 0.563079] usbcore: registered new interface driver hub [ 0.564270] usbcore: registered new device driver usb [ 0.576782] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.577880] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.579559] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.580444] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.584655] Switched to clocksource 32k_counter [ 0.726501] NET: Registered protocol family 2 [ 0.728332] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.728576] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.731201] TCP: Hash tables configured (established 8192 bind 8192) [ 0.731445] TCP: reno registered [ 0.731506] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.731872] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.733123] NET: Registered protocol family 1 [ 0.734374] RPC: Registered named UNIX socket transport module. [ 0.734436] RPC: Registered udp transport module. [ 0.734466] RPC: Registered tcp transport module. [ 0.734466] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.740661] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.744598] VFS: Disk quotas dquot_6.5.2 [ 0.744750] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.746948] NFS: Registering the id_resolver key type [ 0.747283] Key type id_resolver registered [ 0.747314] Key type id_legacy registered [ 0.747467] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.748046] msgmni has been set to 1468 [ 0.750823] bounce: pool size: 64 pages [ 0.750915] io scheduler noop registered [ 0.750946] io scheduler deadline registered [ 0.751098] io scheduler cfq registered (default) [ 0.753845] omap-usb2 4a0ad080.usb2phy: unable to get wkupclk, trying old name [ 0.753875] omap-usb2 4a0ad080.usb2phy: found usb_phy_cm_clk32k, please fix DTS [ 0.755828] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.756317] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.758666] pbias_mmc_omap4: 1800 <--> 3000 mV at 3000 mV [ 0.760101] abb_mpu: 1025 <--> 1389 mV [ 0.760986] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.766326] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.766357] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.766815] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.768432] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.768463] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 0.768676] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.769897] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.769927] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 0.770141] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.842132] console [ttyO2] enabled [ 1.846984] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.852844] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.862548] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.893585] brd: module loaded [ 1.909057] loop: module loaded [ 1.914154] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.924468] twl 0-0048: PIH (irq 39) nested IRQs [ 1.932739] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.940063] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.947113] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.954162] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.960723] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.967193] VUSIM: 1200 <--> 2900 mV [ 1.972442] VDAC: 1800 mV [ 1.976470] VANA: 2100 mV [ 1.980957] VCXIO: 1800 mV [ 1.985229] VUSB: 3300 mV [ 1.989746] V1V8: 1800 mV [ 1.994140] V2V1: 2100 mV [ 2.002227] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.016601] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/spi@48098000/eth@0[0]' [ 2.026336] spi1.0 supply vdd-io not found, using dummy regulator [ 2.033416] ks8851 spi1.0: message enable is 0 [ 2.044158] ks8851 spi1.0 eth0: revision 1, MAC 8a:02:de:fd:cb:92, IRQ 331, no EEPROM [ 2.054687] usbcore: registered new interface driver asix [ 2.060485] usbcore: registered new interface driver ax88179_178a [ 2.067077] usbcore: registered new interface driver cdc_ether [ 2.073333] usbcore: registered new interface driver smsc95xx [ 2.079559] usbcore: registered new interface driver net1080 [ 2.085662] usbcore: registered new interface driver cdc_subset [ 2.091979] usbcore: registered new interface driver zaurus [ 2.098083] usbcore: registered new interface driver cdc_ncm [ 2.105010] usbcore: registered new interface driver cdc_wdm [ 2.111145] usbcore: registered new interface driver usb-storage [ 2.117645] usbcore: registered new interface driver usbtest [ 2.125823] mousedev: PS/2 mouse device common for all mice [ 2.134735] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.142395] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.152770] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.162017] i2c /dev entries driver [ 2.168457] Driver for 1-wire Dallas network protocol. [ 2.177398] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.186187] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.195312] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.205566] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.244720] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.254119] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.263763] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.270782] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.277679] omap_hsmmc 480d5000.mmc: pins are not configured from the driver [ 2.285491] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.322570] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.325408] ledtrig-cpu: registered to indicate activity on CPUs [ 2.325866] usbcore: registered new interface driver usbhid [ 2.325866] usbhid: USB HID core driver [ 2.327362] oprofile: no performance counters [ 2.328247] oprofile: using timer interrupt. [ 2.328826] TCP: cubic registered [ 2.328857] Initializing XFRM netlink socket [ 2.328948] NET: Registered protocol family 17 [ 2.329010] NET: Registered protocol family 15 [ 2.329284] Key type dns_resolver registered [ 2.330047] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.330047] omap2_set_init_voltage: unable to set vdd_mpu [ 2.330078] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.330078] omap2_set_init_voltage: unable to set vdd_core [ 2.330108] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.330108] omap2_set_init_voltage: unable to set vdd_iva [ 2.331939] Power Management for TI OMAP4+ devices. [ 2.332000] Power Management for TI OMAP4. [ 2.332000] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.337554] ThumbEE CPU extension supported. [ 2.337554] Registering SWP/SWPB emulation handler [ 2.337554] SmartReflex Class3 initialized [ 2.360015] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.360046] sr_init: No PMIC hook to init smartreflex [ 2.360046] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.360900] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.360900] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 2.399841] VUSB: disabling [ 2.400604] VANA: disabling [ 2.401275] VDAC: disabling [ 2.403961] VAUX1_6030: disabling [ 2.501739] mmc0: new high speed SDHC card at address 0007