U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete - CRC mode, 6(SOH)/4307(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00434d99 = 4410777 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4410713 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.16.0-rc6-79807-g9a3c414 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Jul 24 14:27:59 MDT 2014 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c08c0c00, node_mem_map edff1000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 526 pages used for memmap [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/mach-omap2/omap4-common.c:172 omap4_l2c310_write_sec+0x5c/0x98() [ 0.000000] OMAP L2C310: ignoring write to reg 0xf80 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.16.0-rc6-79807-g9a3c414 #1 [ 0.000000] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.000000] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.000000] [] (dump_stack) from [] (warn_slowpath_common+0x68/0x8c) [ 0.000000] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.000000] [] (warn_slowpath_fmt) from [] (omap4_l2c310_write_sec+0x5c/0x98) [ 0.000000] [] (omap4_l2c310_write_sec) from [] (l2c310_enable+0x13c/0x200) [ 0.000000] [] (l2c310_enable) from [] (__l2c_init+0x168/0x1f0) [ 0.000000] [] (__l2c_init) from [] (l2x0_of_init+0x178/0x1ac) [ 0.000000] [] (l2x0_of_init) from [] (omap_l2_cache_init+0x44/0x9c) [ 0.000000] [] (omap_l2_cache_init) from [] (omap4430_init_early+0x6c/0xa0) [ 0.000000] [] (omap4430_init_early) from [] (setup_arch+0x8b4/0x998) [ 0.000000] [] (setup_arch) from [] (start_kernel+0x7c/0x3a0) [ 0.000000] [] (start_kernel) from [<80008074>] (0x80008074) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edf9e000 s14336 r8192 d14336 u36864 [ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1004572K/1047552K available (5659K kernel code, 681K rwdata, 2200K rodata, 406K init, 8209K bss, 42980K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07b4f90 (7860 kB) [ 0.000000] .init : 0xc07b5000 - 0xc081a800 ( 406 kB) [ 0.000000] .data : 0xc081c000 - 0xc08c6570 ( 682 kB) [ 0.000000] .bss : 0xc08c6570 - 0xc10caa60 (8210 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000122] smp_twd: clock not found -2 [ 0.001739] Console: colour dummy device 80x30 [ 0.001770] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001800] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001800] ... MAX_LOCK_DEPTH: 48 [ 0.001800] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001800] ... CLASSHASH_SIZE: 4096 [ 0.001831] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001831] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001831] ... CHAINHASH_SIZE: 32768 [ 0.001831] memory used by lock dependency info: 5167 kB [ 0.001861] per task-struct memory footprint: 1152 bytes [ 0.001892] Calibrating local timer... 347.70MHz. [ 0.059051] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.148468] pid_max: default: 32768 minimum: 301 [ 0.148925] Security Framework initialized [ 0.149047] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.149078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.151367] CPU: Testing write buffer coherency: ok [ 0.152435] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152526] Setting up static identity map for 0x8055ca80 - 0x8055caf0 [ 0.158081] CPU1: Booted secondary processor [ 0.188171] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.188751] Brought up 2 CPUs [ 0.188781] SMP: Total of 2 processors activated. [ 0.188781] CPU: All CPU(s) started in SVC mode. [ 0.191406] devtmpfs: initialized [ 0.200897] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.205017] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.208862] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.370635] pinctrl core: initialized pinctrl subsystem [ 0.373199] regulator-dummy: no parameters [ 0.416625] NET: Registered protocol family 16 [ 0.422515] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.424621] cpuidle: using governor ladder [ 0.424621] cpuidle: using governor menu [ 0.438842] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.439666] OMAP GPIO hardware version 0.1 [ 0.440826] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.442443] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.444061] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.445678] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.447357] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.448669] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.467041] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.467498] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.469573] No ATAGs? [ 0.469665] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.469665] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.472106] OMAP DMA hardware revision 0.0 [ 0.521789] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.521850] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.556671] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.557495] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' [ 0.558105] VDD_ETH: 3300 mV [ 0.562561] SCSI subsystem initialized [ 0.563354] usbcore: registered new interface driver usbfs [ 0.563537] usbcore: registered new interface driver hub [ 0.565032] usbcore: registered new device driver usb [ 0.577697] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.578796] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.580596] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.581481] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.585906] Switched to clocksource 32k_counter [ 0.714660] NET: Registered protocol family 2 [ 0.716552] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.716796] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.719390] TCP: Hash tables configured (established 8192 bind 8192) [ 0.719635] TCP: reno registered [ 0.719665] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.720031] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.721282] NET: Registered protocol family 1 [ 0.722381] RPC: Registered named UNIX socket transport module. [ 0.722381] RPC: Registered udp transport module. [ 0.722412] RPC: Registered tcp transport module. [ 0.722412] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.728851] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.732910] VFS: Disk quotas dquot_6.5.2 [ 0.733062] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.735290] NFS: Registering the id_resolver key type [ 0.735992] Key type id_resolver registered [ 0.735992] Key type id_legacy registered [ 0.736175] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.736724] msgmni has been set to 1468 [ 0.739807] bounce: pool size: 64 pages [ 0.739929] io scheduler noop registered [ 0.739929] io scheduler deadline registered [ 0.740051] io scheduler cfq registered (default) [ 0.742462] omap-usb2 4a0ad080.usb2phy: unable to get wkupclk, trying old name [ 0.742492] omap-usb2 4a0ad080.usb2phy: found usb_phy_cm_clk32k, please fix DTS [ 0.744384] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.744842] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.747314] pbias_mmc_omap4: 1800 <--> 3000 mV at 3000 mV [ 0.748779] abb_mpu: 1025 <--> 1389 mV [ 0.749633] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.755035] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.755035] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.755493] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.757446] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.757446] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 0.757690] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.758758] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.758758] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 0.758972] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.831451] console [ttyO2] enabled [ 1.836608] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.842437] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806e000[0]' [ 1.852142] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.883056] brd: module loaded [ 1.898590] loop: module loaded [ 1.903656] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.913940] twl 0-0048: PIH (irq 39) nested IRQs [ 1.921264] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.928924] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.936187] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.943206] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.949707] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.956146] VUSIM: 1200 <--> 2900 mV [ 1.961364] VDAC: 1800 mV [ 1.965362] VANA: 2100 mV [ 1.969848] VCXIO: 1800 mV [ 1.973937] VUSB: 3300 mV [ 1.978393] V1V8: 1800 mV [ 1.982818] V2V1: 2100 mV [ 1.990844] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.005187] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/spi@48098000/eth@0[0]' [ 2.014892] spi1.0 supply vdd-io not found, using dummy regulator [ 2.021911] ks8851 spi1.0: message enable is 0 [ 2.032409] ks8851 spi1.0 eth0: revision 1, MAC e6:2f:96:e1:fa:15, IRQ 331, no EEPROM [ 2.042907] usbcore: registered new interface driver asix [ 2.048706] usbcore: registered new interface driver ax88179_178a [ 2.055206] usbcore: registered new interface driver cdc_ether [ 2.061523] usbcore: registered new interface driver smsc95xx [ 2.067657] usbcore: registered new interface driver net1080 [ 2.073699] usbcore: registered new interface driver cdc_subset [ 2.080047] usbcore: registered new interface driver zaurus [ 2.086090] usbcore: registered new interface driver cdc_ncm [ 2.092987] usbcore: registered new interface driver cdc_wdm [ 2.099182] usbcore: registered new interface driver usb-storage [ 2.105712] usbcore: registered new interface driver usbtest [ 2.113677] mousedev: PS/2 mouse device common for all mice [ 2.122497] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.130187] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.140289] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.149505] i2c /dev entries driver [ 2.156036] Driver for 1-wire Dallas network protocol. [ 2.164916] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.173675] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.182800] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.192932] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.235870] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.244964] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480d5000[0]' [ 2.254394] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.261413] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.268280] omap_hsmmc 480d5000.mmc: pins are not configured from the driver [ 2.273742] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.275970] mmc0: new high speed SDHC card at address 0007 [ 2.277984] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.283020] mmcblk0: p1 p2 [ 2.297729] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.336547] ledtrig-cpu: registered to indicate activity on CPUs [ 2.342285] omap_hsmmc 480d5000.mmc: exceeding card's volts [ 2.349182] usbcore: registered new interface driver usbhid [ 2.355010] usbhid: USB HID core driver [ 2.360595] oprofile: no performance counters [ 2.366485] oprofile: using timer interrupt. [ 2.371582] TCP: cubic registered [ 2.375030] Initializing XFRM netlink socket [ 2.379638] NET: Registered protocol family 17 [ 2.384338] NET: Registered protocol family 15 [ 2.389312] Key type dns_resolver registered [ 2.394592] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.401824] omap2_set_init_voltage: unable to set vdd_mpu [ 2.407501] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.414764] omap2_set_init_voltage: unable to set vdd_core [ 2.420532] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.427734] omap2_set_init_voltage: unable to set vdd_iva [ 2.435272] Power Management for TI OMAP4+ devices. [ 2.440460] Power Management for TI OMAP4. [ 2.444732] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.452056] ThumbEE CPU extension supported. [ 2.457611] Registering SWP/SWPB emulation handler [ 2.457611] SmartReflex Class3 initialized [ 2.473968] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.477111] sr_init: No PMIC hook to init smartreflex [ 2.486389] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.498138] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.506835] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 2.551696] VUSB: disabling [ 2.555419] VANA: disabling [ 2.559082] VDAC: disabling [ 2.564727] VAUX1_6030: disabling [ 2.570373] Waiting for root device /dev/mmcblk1p2... [ 2.615844] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.732391] mmc1: host does not support reading read-only switch. assuming write-enable. [ 2.742767] mmc1: new high speed SDHC card at address b368 [ 2.749694] mmcblk1: mmc1:b368 USD 3.75 GiB [ 2.757507] mmcblk1: p1 p2 [ 2.785858] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.795318] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.807403] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 2.821716] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 2.829895] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 3.961395] EXT4-fs (mmcblk1p2): recovery complete [ 4.427429] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.427429] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 4.445709] devtmpfs: mounted [ 4.449737] Freeing unused kernel memory: 404K (c07b5000 - c081a000) modprobe: FATAL: Could not load /lib/modules/3.16.0-rc6-79807-g9a3c414/modules.dep: No such file or directory INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 5.585357] udevd[856]: starting version 172 . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...[ 6.693237] random: nonblocking pool is initialized done. Activating swap...done. [ 7.334014] EXT4-fs (mmcblk1p2): warning: mounting fs with errors, running e2fsck is recommended [ 7.696533] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux 2.19.1 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...done. Cleaning up temporary files.... Setting kernel variables ...done. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Debian GNU/Linux wheezy/sid armel ttyO2 armel login: