Texas Instruments X-Loader 1.47 (Jan 14 2011 - 15:43:28) Starting X-loader on MMC Reading boot sector 212836 Bytes Read from MMC Starting OS Bootloader from MMC... Starting OS Bootloader... U-Boot 2010.06 (Jan 14 2011 - 15:43:45) OMAP34xx/35xx-GP ES2.1, CPU-OPP2 L3-165MHz OMAP3 EVM board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 512 MiB In: serial Out: serial Err: serial Read back SMSC id 0x92200000 Die ID #368000229ff80000016071640902c013 Net: smc911x-0 Hit any key to stop autoboot: 3  2  1  0 OMAP3_EVM # OMAP3_EVM # setenv bootfile uImage-dtb.omap3-evm-37xx OMAP3_EVM # OMAP3_EVM # dhcp smc911x: detected LAN9220 controller smc911x: phy initialized smc911x: MAC 00:50:c2:7e:99:42 BOOTP broadcast 1 DHCP client bound to address 192.168.57.131 Using smc911x-0 device TFTP from server 192.168.57.1; our IP address is 192.168.57.131 Filename 'uImage-dtb.omap3-evm-37xx'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################### done Bytes transferred = 4426204 (4389dc hex) OMAP3_EVM # setenv bootargs console=ttyO0,115200n8 ignore_loglevel earlyprintk root=/dev/nfs nfsroot=192.168.57.1:/srv/nfs4/rootfs2 nfsrootdebug ip=dhcp init=/bin/sh OMAP3_EVM # OMAP3_EVM # bootm ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4426140 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.16.0-rc6-79807-g9a3c414 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Jul 24 14:27:59 MDT 2014 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI OMAP37XX EVM (TMDSEVM3730) [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at 8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c08c0c00, node_mem_map cfcf1000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] HighMem zone: 1048574 pages exceeds freesize 0 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @cfc7d000 s14336 r8192 d14336 u36864 [ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO0,115200n8 ignore_loglevel earlyprintk root=/dev/nfs nfsroot=192.168.57.1:/srv/nfs4/rootfs2 nfsrootdebug ip=dhcp init=/bin/sh [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 224728K/261120K available (5659K kernel code, 681K rwdata, 2200K rodata, 406K init, 8209K bss, 36392K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07b4f90 (7860 kB) [ 0.000000] .init : 0xc07b5000 - 0xc081a800 ( 406 kB) [ 0.000000] .data : 0xc081c000 - 0xc08c6570 ( 682 kB) [ 0.000000] .bss : 0xc08c6570 - 0xc10caa60 (8210 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001129] Console: colour dummy device 80x30 [ 0.001190] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001190] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001220] ... MAX_LOCK_DEPTH: 48 [ 0.001220] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001251] ... CLASSHASH_SIZE: 4096 [ 0.001251] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001251] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001281] ... CHAINHASH_SIZE: 32768 [ 0.001281] memory used by lock dependency info: 5167 kB [ 0.001312] per task-struct memory footprint: 1152 bytes [ 0.001342] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.107543] pid_max: default: 32768 minimum: 301 [ 0.108123] Security Framework initialized [ 0.108337] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.108367] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.111633] CPU: Testing write buffer coherency: ok [ 0.113159] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.113311] Setting up static identity map for 0x8055ca80 - 0x8055caf0 [ 0.118164] Brought up 1 CPUs [ 0.118194] SMP: Total of 1 processors activated. [ 0.118194] CPU: All CPU(s) started in SVC mode. [ 0.122009] devtmpfs: initialized [ 0.133148] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.216156] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.218597] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.327880] pinctrl core: initialized pinctrl subsystem [ 0.331481] regulator-dummy: no parameters [ 0.428802] NET: Registered protocol family 16 [ 0.437683] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.441192] cpuidle: using governor ladder [ 0.441253] cpuidle: using governor menu [ 0.450012] Reprogramming SDRC clock to 400000000 Hz [ 0.462860] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.464172] OMAP GPIO hardware version 2.5 [ 0.466064] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.468933] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.471649] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.474334] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.477081] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.478515] irq: no irq domain found for /ocp/pinmux@48002030 ! [ 0.479370] irq: no irq domain found for /ocp/pinmux@48002030 ! [ 0.480163] irq: no irq domain found for /ocp/pinmux@48002030 ! [ 0.503540] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.505096] gpmc_probe_nand_child: ti,elm-id property not found [ 0.505310] gpmc_cs_program_settings: invalid width 0! [ 0.507843] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi' [ 0.516174] No ATAGs? [ 0.516204] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.519989] OMAP DMA hardware revision 5.0 [ 0.560485] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.560577] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.615844] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.617218] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vddvario[0]' [ 0.618011] vddvario: no parameters [ 0.618682] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vdd33a[0]' [ 0.619232] vdd33a: no parameters [ 0.619873] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux@48002030/pinmux_wl12xx_gpio, deferring probe [ 0.619934] platform wl12xx_vmmc: Driver reg-fixed-voltage requests probe deferral [ 0.620178] of_get_named_gpiod_flags exited with status 0 [ 0.621032] lcd_3v3: 3300 mV [ 0.627593] SCSI subsystem initialized [ 0.628814] usbcore: registered new interface driver usbfs [ 0.629119] usbcore: registered new interface driver hub [ 0.630187] usbcore: registered new device driver usb [ 0.785217] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz [ 0.788482] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz [ 0.791992] omap_i2c 48060000.i2c: bus 2 rev4.4 at 400 kHz [ 0.799987] Switched to clocksource 32k_counter [ 1.019439] NET: Registered protocol family 2 [ 1.021881] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.022125] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.023254] TCP: Hash tables configured (established 2048 bind 2048) [ 1.023437] TCP: reno registered [ 1.023498] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.023803] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.025451] NET: Registered protocol family 1 [ 1.027893] RPC: Registered named UNIX socket transport module. [ 1.027923] RPC: Registered udp transport module. [ 1.027954] RPC: Registered tcp transport module. [ 1.027954] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.029968] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 1.037963] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.044891] VFS: Disk quotas dquot_6.5.2 [ 1.045074] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.048583] NFS: Registering the id_resolver key type [ 1.049102] Key type id_resolver registered [ 1.049133] Key type id_legacy registered [ 1.049346] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.049987] msgmni has been set to 470 [ 1.057830] io scheduler noop registered [ 1.057861] io scheduler deadline registered [ 1.057983] io scheduler cfq registered (default) [ 1.062103] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.062896] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.063995] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92 [ 1.067443] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV [ 1.069854] abb_mpu_iva: 1012 <--> 1375 mV [ 1.071350] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.081573] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 1.082214] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.974517] console [ttyO0] enabled [ 1.982360] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 1.992340] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 2.007751] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@49020000[0]' [ 2.017700] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.030212] omap_uart 49042000.serial: no wakeirq for uart0 [ 2.036102] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@49042000[0]' [ 2.046722] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3 [ 2.103942] brd: module loaded [ 2.130554] loop: module loaded [ 2.153961] twl 0-0048: PIH (irq 23) chaining IRQs 341..349 [ 2.160522] twl 0-0048: power (irq 346) chaining IRQs 349..356 [ 2.177307] VAUX1: at 3000 mV [ 2.185363] VAUX2_4030: at 1800 mV [ 2.193115] VAUX3: at 2800 mV [ 2.205047] VAUX4: at 2800 mV [ 2.212768] VDD1: 600 <--> 1450 mV at 1200 mV [ 2.222717] VDAC: 1800 mV [ 2.232635] VIO: at 1800 mV [ 2.240875] VINTANA1: 1500 mV [ 2.249420] VINTANA2: at 2750 mV [ 2.257843] VINTDIG: 1500 mV [ 2.264434] VMMC1: 1850 <--> 3150 mV at 3000 mV [ 2.274505] VMMC2: 1850 <--> 3150 mV at 2600 mV [ 2.283416] VUSB1V5: 1500 mV [ 2.288940] VUSB1V8: 1800 mV [ 2.294250] VUSB3V1: 3100 mV [ 2.302185] VPLL1: at 1800 mV [ 2.312255] VPLL2: 1800 mV [ 2.319458] VSIM: 1800 <--> 3000 mV at 1800 mV [ 2.327941] twl4030_gpio twl4030-gpio: gpio (irq 341) chaining IRQs 357..374 [ 2.336761] gpiochip_find_base: found new base at 492 [ 2.343261] gpiochip_add: registered GPIOs 492 to 511 on device: twl4030 [ 2.432647] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.471832] libphy: smsc911x-mdio: probed [ 2.549285] smsc911x 2c000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2c000000.etherne:01, irq=-1) [ 2.561706] smsc911x 2c000000.ethernet eth0: MAC Address: 00:50:c2:7e:99:42 [ 2.571411] usbcore: registered new interface driver asix [ 2.577301] usbcore: registered new interface driver ax88179_178a [ 2.584045] usbcore: registered new interface driver cdc_ether [ 2.590545] usbcore: registered new interface driver smsc95xx [ 2.596801] usbcore: registered new interface driver net1080 [ 2.602996] usbcore: registered new interface driver cdc_subset [ 2.609527] usbcore: registered new interface driver zaurus [ 2.615722] usbcore: registered new interface driver cdc_ncm [ 2.623504] usbcore: registered new interface driver cdc_wdm [ 2.629852] usbcore: registered new interface driver usb-storage [ 2.636505] usbcore: registered new interface driver usbtest [ 2.645904] mousedev: PS/2 mouse device common for all mice [ 2.653442] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad [ 2.665679] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap [ 2.673370] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2 [ 2.683319] of_get_named_gpiod_flags exited with status 0 [ 2.770233] ads7846 spi1.0: touchscreen, irq 287 [ 2.778106] input: ADS7846 Touchscreen as /devices/68000000.ocp/48098000.spi/spi_master/spi1/spi1.0/input/input1 [ 2.796722] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input2 [ 2.813842] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.821807] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.833374] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.844543] i2c /dev entries driver [ 2.852386] Driver for 1-wire Dallas network protocol. [ 2.862823] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 2.876129] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.885467] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.939178] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 2.948364] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 2.958343] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 2.966003] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 2.974853] of_get_named_gpiod_flags exited with status 0 [ 2.980712] of_get_named_gpiod_flags exited with status 0 [ 2.995117] ledtrig-cpu: registered to indicate activity on CPUs [ 3.002899] usbcore: registered new interface driver usbhid [ 3.008850] usbhid: USB HID core driver [ 3.015624] oprofile: using arm/armv7 [ 3.020446] TCP: cubic registered [ 3.023956] Initializing XFRM netlink socket [ 3.028717] NET: Registered protocol family 17 [ 3.033538] NET: Registered protocol family 15 [ 3.038818] Key type dns_resolver registered [ 3.043731] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.051422] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.057525] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.064910] omap2_set_init_voltage: unable to set vdd_core [ 3.075653] ThumbEE CPU extension supported. [ 3.080352] Registering SWP/SWPB emulation handler [ 3.085418] SmartReflex Class3 initialized [ 3.097473] of_get_named_gpiod_flags exited with status 0 [ 3.104431] vwl1271: 1800 mV [ 3.107788] vwl1271: supplied by VMMC2 [ 3.113555] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 3.122833] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 3.264984] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.275146] sr_init: No PMIC hook to init smartreflex [ 3.281188] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.290405] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.476074] smsc911x 2c000000.ethernet eth0: SMSC911x/921x identified at 0xd087c000, IRQ: 288 [ 3.499023] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.507873] mmc0: new SDHC card at address e624 [ 3.516693] mmcblk0: mmc0:e624 SD08G 7.40 GiB [ 3.539855] mmcblk0: p1 p2 p3 [ 5.578704] Sending DHCP requests ., OK [ 5.669158] IP-Config: Got DHCP answer from 192.168.57.1, my address is 192.168.57.131 [ 5.678161] IP-Config: Complete: [ 5.681732] device=eth0, hwaddr=00:50:c2:7e:99:42, ipaddr=192.168.57.131, mask=255.255.255.0, gw=255.255.255.255 [ 5.692993] host=192.168.57.131, domain=example.org, nis-domain=(none) [ 5.700378] bootserver=0.0.0.0, rootserver=192.168.57.1, rootpath= [ 5.707183] nameserver0=192.168.57.1 [ 5.712036] vwl1271: disabling [ 5.716369] VUSB3V1: disabling [ 5.747467] VFS: Mounted root (nfs filesystem) readonly on device 0:13. [ 5.756744] devtmpfs: mounted [ 5.761047] Freeing unused kernel memory: 404K (c07b5000 - c081a000) /bin/sh: 0: can't access tty; job control turned off # %% Start PM consolidated quick test %% Preparation # # mount -t sysfs none /sys # # mount -t debugfs none /debug # # # # for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do echo -1 > $u/power/autosuspend_delay_ms; done # # echo 0 > /debug/pm_debug/enable_off_mode # # %% Baseline pm_debug count dump cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:0,RET:108,INA:0,ON:109,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:0,RET:108,INA:0,ON:109,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:0,RET:81,INA:27,ON:109,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:0,RET:81,INA:27,ON:109,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (15) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) core_l4_clkdm->core_pwrdm (22) core_l3_clkdm->core_pwrdm (1) neon_clkdm->neon_pwrdm (0) # # for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do echo enabled > $u/power/wakeup; done # %% Start retention double suspend/resume UART wakeup test # for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do echo auto > $u/power/control; done # # echo mem > /sys/power/state [ 13.636505] PM: Syncing filesystems ... done. [ 13.643310] PM: Preparing system for mem sleep [ 13.656524] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 13.664276] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done. [ 13.675506] PM: Entering mem sleep [ 13.679260] Suspending console(s) (use no_console_suspend to debug) [ 13.714019] PM: suspend of devices complete after 21.789 msecs [ 13.722259] PM: late suspend of devices complete after 8.209 msecs [ 13.731292] PM: noirq suspend of devices complete after 9.002 msecs [ 13.731384] Disabling non-boot CPUs ... [ 13.731506] Successfully put all powerdomains to target state [ 13.736541] PM: noirq resume of devices complete after 4.943 msecs [ 13.743103] PM: early resume of devices complete after 5.432 msecs [ 14.011322] PM: resume of devices complete after 268.066 msecs [ 14.066833] PM: Finishing wakeup. [ 14.070373] Restarting tasks ... done. # # # # cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:0,RET:231,INA:0,ON:232,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:0,RET:231,INA:0,ON:232,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:0,RET:197,INA:34,ON:232,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:0,RET:197,INA:34,ON:232,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (15) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) core_l4_clkdm->core_pwrdm (26) core_l3_clkdm->core_pwrdm (1) neon_clkdm->neon_pwrdm (0) # # # # echo mem > /sys/power/state [ 15.925170] PM: Syncing filesystems ... done. [ 15.930206] PM: Preparing system for mem sleep [ 15.936981] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 15.944610] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 15.954406] PM: Entering mem sleep [ 15.958007] Suspending console(s) (use no_console_suspend to debug) [ 15.985900] PM: suspend of devices complete after 15.075 msecs [ 15.994018] PM: late suspend of devices complete after 8.117 msecs [ 16.002563] PM: noirq suspend of devices complete after 8.483 msecs [ 16.002593] Disabling non-boot CPUs ... [ 16.002685] Successfully put all powerdomains to target state [ 16.007598] PM: noirq resume of devices complete after 4.882 msecs [ 16.014129] PM: early resume of devices complete after 5.310 msecs [ 16.280548] PM: resume of devices complete after 266.265 msecs [ 16.335540] PM: Finishing wakeup. [ 16.339080] Restarting tasks ... done. # # # # cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:0,RET:337,INA:0,ON:338,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:0,RET:337,INA:0,ON:338,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:0,RET:302,INA:35,ON:338,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:0,RET:302,INA:35,ON:338,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (15) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) core_l4_clkdm->core_pwrdm (27) core_l3_clkdm->core_pwrdm (1) neon_clkdm->neon_pwrdm (0) # # # # ./test_rootfs_access_nonexistent_file__ret_susp /bin/sh: 35: ./test_rootfs_access_nonexistent_file__ret_susp: not found # # %% End retention double suspend/resume UART wakeup test %% Start retention dynamic idle UART wakeup test for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do echo 3000 > $u/power/autosuspend_delay_ms; done # # # # # # cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:0,RET:444,INA:0,ON:445,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:0,RET:25,INA:0,ON:26,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:0,RET:444,INA:0,ON:445,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:0,RET:400,INA:44,ON:445,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:0,RET:400,INA:44,ON:445,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (13) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) core_l4_clkdm->core_pwrdm (21) core_l3_clkdm->core_pwrdm (1) neon_clkdm->neon_pwrdm (0) # # # # ./test_rootfs_access_nonexistent_file__ret_dyn /bin/sh: 47: ./test_rootfs_access_nonexistent_file__ret_dyn: not found # # for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do echo -1 > $u/power/autosuspend_delay_ms; done # # %% End retention dynamic idle UART wakeup test %% Start off-mode double suspend UART wakeup test echo 1 > /debug/pm_debug/enable_off_mode # # echo mem > /sys/power/state [ 31.995300] PM: Syncing filesystems ... done. [ 32.001037] PM: Preparing system for mem sleep [ 32.007904] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 32.015533] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 32.025329] PM: Entering mem sleep [ 32.028991] Suspending console(s) (use no_console_suspend to debug) [ 32.056823] PM: suspend of devices complete after 15.045 msecs [ 32.064910] PM: late suspend of devices complete after 8.026 msecs [ 32.073364] PM: noirq suspend of devices complete after 8.453 msecs [ 32.073394] Disabling non-boot CPUs ... [ 32.073486] Successfully put all powerdomains to target state [ 32.092041] PM: noirq resume of devices complete after 18.493 msecs [ 32.098541] PM: early resume of devices complete after 5.371 msecs [ 32.360412] PM: resume of devices complete after 261.749 msecs [ 32.415466] PM: Finishing wakeup. [ 32.419036] Restarting tasks ... done. # # # # cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:33,RET:530,INA:0,ON:564,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:1,RET:2,INA:0,ON:4,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:1,RET:105,INA:0,ON:107,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:33,RET:530,INA:0,ON:564,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:24,RET:490,INA:49,ON:564,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:24,RET:490,INA:49,ON:564,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (15) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) core_l4_clkdm->core_pwrdm (22) core_l3_clkdm->core_pwrdm (1) neon_clkdm->neon_pwrdm (0) # # # # echo mem > /sys/power/state [ 34.864532] PM: Syncing filesystems ... done. [ 34.869506] PM: Preparing system for mem sleep [ 34.876281] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 34.883880] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 34.893707] PM: Entering mem sleep [ 34.897277] Suspending console(s) (use no_console_suspend to debug) [ 34.925018] PM: suspend of devices complete after 14.923 msecs [ 34.933135] PM: late suspend of devices complete after 8.117 msecs [ 34.941619] PM: noirq suspend of devices complete after 8.453 msecs [ 34.941650] Disabling non-boot CPUs ... [ 34.941741] Successfully put all powerdomains to target state [ 34.960327] PM: noirq resume of devices complete after 18.524 msecs [ 34.966735] PM: early resume of devices complete after 5.310 msecs [ 35.230255] PM: resume of devices complete after 263.397 msecs [ 35.285339] PM: Finishing wakeup. [ 35.288879] Restarting tasks ... done. # # # # cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:131,RET:530,INA:0,ON:662,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:2,RET:2,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:2,RET:105,INA:0,ON:108,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:131,RET:530,INA:0,ON:662,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:47,RET:564,INA:50,ON:662,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:47,RET:564,INA:50,ON:662,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (15) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) core_l4_clkdm->core_pwrdm (22) core_l3_clkdm->core_pwrdm (1) neon_clkdm->neon_pwrdm (0) # # # # ./test_rootfs_access_nonexistent_file__off_susp /bin/sh: 69: ./test_rootfs_access_nonexistent_file__off_susp: not found # # %% End off-mode double suspend UART wakeup test %% Start off-mode dynamic idle UART wakeup test for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do echo 3000 > $u/power/autosuspend_delay_ms; done # # # # # # cat /debug/pm_debug/count usbhost_pwrdm (ON),OFF:230,RET:530,INA:0,ON:761,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 core_pwrdm (ON),OFF:2,RET:2,INA:0,ON:5,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 per_pwrdm (ON),OFF:2,RET:125,INA:0,ON:128,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 dss_pwrdm (ON),OFF:230,RET:530,INA:0,ON:761,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 neon_pwrdm (ON),OFF:68,RET:641,INA:51,ON:761,RET-LOGIC-OFF:0 mpu_pwrdm (ON),OFF:68,RET:641,INA:51,ON:761,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0 iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0 usbhost_clkdm->usbhost_pwrdm (1) sgx_clkdm->sgx_pwrdm (0) per_clkdm->per_pwrdm (13) cam_clkdm->cam_pwrdm (0) dss_clkdm->dss_pwrdm (1) d2d_clkdm->core_pwrdm (0) iva2_clkdm->iva2_pwrdm (0) mpu_clkdm->mpu_pwrdm (0) core_l4_clkdm->core_pwrdm (21) core_l3_clkdm->core_pwrdm (1) neon_clkdm->neon_pwrdm (0) # # # # ./test_rootfs_access_nonexistent_file__off_dyn /bin/sh: 81: ./test_rootfs_access_nonexistent_file__off_dyn: not found # # %% End off-mode dynamic idle UART wakeup test %% End PM consolidated quick test