怘€æ€˜€`3f<€fÀæøÀ̆ž?`??f?æžf<øž`æøÀxfÏæž<`<f<?˜à?˜æ?À033憞˜àÌÃÀ˜à˜à˜žÃÃóÀÌóÀ˜33f€˜€0f<<~<àžf<Ã3††~0æ€fóÌ3ð3f<<`<†žøž~<æžþž`?˜øfÃæàóæž?怘€à˜þž<`<†žøž~<˜æfÏàæžþž`?ø†<†žøž†øæžæž˜žfÏæàfü

U-Boot 2011.06-dirty (Sep 04 2012 - 17:06:58)

OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  256 MiB
NAND:  512 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle Rev C4
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Die ID #668c000400000000040398d31601f008
Hit any key to stop autoboot:  3  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # loady 0x81000000
## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
CSending: uImage-dtb.omap3-beagle
Sending: 

Transfer complete
em - CRC mode, 8(SOH)/4346(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x0043eadb = 4451035 Bytes
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,230400n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # bootm 0x81000000
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4450971 Bytes = 4.2 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.17.0-rc4-92410-g2ce7598 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Sep 10 23:49:15 MDT 2014
[    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard
[    0.000000] cma: Reserved 16 MiB at 8e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000]   HighMem zone: 1048574 pages exceeds freesize 0
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[    0.000000] PERCPU: Embedded 9 pages/cpu @cfc7e000 s14336 r8192 d14336 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO2,230400n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 224708K/261120K available (5704K kernel code, 647K rwdata, 2208K rodata, 406K init, 8210K bss, 36412K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07c2420   (7914 kB)
[    0.000000]       .init : 0xc07c3000 - 0xc0828800   ( 406 kB)
[    0.000000]       .data : 0xc082a000 - 0xc08cbe48   ( 648 kB)
[    0.000000]        .bss : 0xc08cbe48 - 0xc10d0a20   (8211 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[    0.000000] OMAP clockevent source: timer12 at 32768 Hz
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000061] OMAP clocksource: 32k_counter at 32768 Hz
[    0.001434] Console: colour dummy device 80x30
[    0.001525] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001525] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001556] ... MAX_LOCK_DEPTH:          48
[    0.001556] ... MAX_LOCKDEP_KEYS:        8191
[    0.001586] ... CLASSHASH_SIZE:          4096
[    0.001586] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001617] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001617] ... CHAINHASH_SIZE:          32768
[    0.001647]  memory used by lock dependency info: 5167 kB
[    0.001647]  per task-struct memory footprint: 1152 bytes
[    0.001739] Calibrating delay loop... 506.26 BogoMIPS (lpj=2531328)
[    0.099365] pid_max: default: 32768 minimum: 301
[    0.100097] Security Framework initialized
[    0.100341] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100372] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.104736] CPU: Testing write buffer coherency: ok
[    0.106933] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.107147] Setting up static identity map for 0x805679c0 - 0x80567a30
[    0.113891] Brought up 1 CPUs
[    0.113922] SMP: Total of 1 processors activated.
[    0.113952] CPU: All CPU(s) started in SVC mode.
[    0.118957] devtmpfs: initialized
[    0.134094] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[    0.239044] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.241943] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.354309] pinctrl core: initialized pinctrl subsystem
[    0.359405] regulator-dummy: no parameters
[    0.483398] NET: Registered protocol family 16
[    0.495727] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.501190] cpuidle: using governor ladder
[    0.501251] cpuidle: using governor menu
[    0.513458] Reprogramming SDRC clock to 332000000 Hz
[    0.528991] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
[    0.529052] platform 48310000.gpio: Driver omap_gpio requests probe deferral
[    0.534667] OMAP GPIO hardware version 2.5
[    0.552154] irq: no irq domain found for /ocp/pinmux@48002030 !
[    0.585723] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.600646] No ATAGs?
[    0.600677] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.605743] OMAP DMA hardware revision 4.0
[    0.662048] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[    0.662170] edma-dma-engine: probe of edma-dma-engine.0 failed with error -22
[    0.735748] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.737762] platform hsusb2_power_reg: Driver reg-fixed-voltage requests probe deferral
[    0.745574] SCSI subsystem initialized
[    0.747344] usbcore: registered new interface driver usbfs
[    0.747863] usbcore: registered new interface driver hub
[    0.749298] usbcore: registered new device driver usb
[    0.750549] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral
[    0.969726] omap_i2c 48070000.i2c: bus 0 rev3.3 at 2600 kHz
[    0.972595] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz
[    0.975006] omap_i2c 48060000.i2c: bus 2 rev3.3 at 100 kHz
[    0.984527] Switched to clocksource 32k_counter
[    1.278442] NET: Registered protocol family 2
[    1.281677] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    1.281982] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[    1.283355] TCP: Hash tables configured (established 2048 bind 2048)
[    1.283660] TCP: reno registered
[    1.283996] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.284393] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.286590] NET: Registered protocol family 1
[    1.289947] RPC: Registered named UNIX socket transport module.
[    1.289978] RPC: Registered udp transport module.
[    1.290008] RPC: Registered tcp transport module.
[    1.290039] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.292388] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    1.303161] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.312835] VFS: Disk quotas dquot_6.5.2
[    1.313079] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.317382] NFS: Registering the id_resolver key type
[    1.318084] Key type id_resolver registered
[    1.318115] Key type id_legacy registered
[    1.318359] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.319244] msgmni has been set to 470
[    1.332305] io scheduler noop registered
[    1.332366] io scheduler deadline registered
[    1.332489] io scheduler cfq registered (default)
[    1.338653] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    1.339660] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    1.341217] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36
[    1.346038] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV 
[    1.350158] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.365386] omap_uart 4806a000.serial: no wakeirq for uart0
[    1.366363] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    1.370452] omap_uart 4806c000.serial: no wakeirq for uart0
[    1.371002] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    1.375885] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    1.773376] console [ttyO2] enabled
[    1.830474] brd: module loaded
[    1.864624] loop: module loaded
[    1.887084] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
[    1.890838] twl 0-0048: power (irq 312) chaining IRQs 315..322
[    1.905364] VAUX1: at 3000 mV 
[    1.914886] vdd_ehci: 1800 mV 
[    1.921600] VAUX3: at 2800 mV 
[    1.928161] VAUX4: at 2800 mV 
[    1.934112] VDD1: 600 <--> 1450 mV at 1200 mV 
[    1.942352] VDAC: 1800 mV 
[    1.951812] VIO: at 1800 mV 
[    1.959716] VINTANA1: 1500 mV 
[    1.967102] VINTANA2: at 2750 mV 
[    1.975158] VINTDIG: 1500 mV 
[    1.980621] VMMC1: 1850 <--> 3150 mV at 3000 mV 
[    1.987976] VMMC2: 1850 <--> 3150 mV at 2600 mV 
[    1.994842] VUSB1V5: 1500 mV 
[    1.999176] VUSB1V8: 1800 mV 
[    2.003540] VUSB3V1: 3100 mV 
[    2.011444] VPLL1: at 1800 mV 
[    2.020416] VPLL2: 1800 mV 
[    2.027404] VSIM: 1800 <--> 3000 mV at 1800 mV 
[    2.033874] twl4030_gpio twl4030-gpio: gpio (irq 307) chaining IRQs 323..340
[    2.054809] mtdoops: mtd device (mtddev=name/number) must be supplied
[    2.076782] usbcore: registered new interface driver asix
[    2.080047] usbcore: registered new interface driver ax88179_178a
[    2.083648] usbcore: registered new interface driver cdc_ether
[    2.087310] usbcore: registered new interface driver smsc95xx
[    2.090728] usbcore: registered new interface driver net1080
[    2.094146] usbcore: registered new interface driver cdc_subset
[    2.097656] usbcore: registered new interface driver zaurus
[    2.101135] usbcore: registered new interface driver cdc_ncm
[    2.117584] usbcore: registered new interface driver cdc_wdm
[    2.121063] usbcore: registered new interface driver usb-storage
[    2.124816] usbcore: registered new interface driver usbtest
[    2.132507] mousedev: PS/2 mouse device common for all mice
[    2.137664] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
[    2.143981] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[    2.147979] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
[    2.160980] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input1
[    2.177551] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[    2.181884] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[    2.196868] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[    2.205078] i2c /dev entries driver
[    2.211914] Driver for 1-wire Dallas network protocol.
[    2.222686] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    2.303161] ledtrig-cpu: registered to indicate activity on CPUs
[    2.307800] usbcore: registered new interface driver usbhid
[    2.310821] usbhid: USB HID core driver
[    2.316711] oprofile: using arm/armv7
[    2.320159] TCP: cubic registered
[    2.321990] Initializing XFRM netlink socket
[    2.324798] NET: Registered protocol family 17
[    2.327362] NET: Registered protocol family 15
[    2.330474] Key type dns_resolver registered
[    2.333251] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    2.337310] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    2.340484] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    2.344360] omap2_set_init_voltage: unable to set vdd_core
[    2.354217] ThumbEE CPU extension supported.
[    2.356628] Registering SWP/SWPB emulation handler
[    2.359283] SmartReflex Class3 initialized
[    2.401214] hsusb2_vbus: 3300 mV 
[    2.413116] input: gpio_keys as /devices/gpio_keys/input/input2
[    2.421508] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    2.426818] sr_init: No PMIC hook to init smartreflex
[    2.430358] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    2.436004] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    2.535980] hsusb2_vbus: disabling
[    2.542633] VUSB3V1: disabling
[    2.548217] VUSB1V8: disabling
[    2.552124] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.557464] VUSB1V5: disabling
[    2.560363] VDAC: disabling
[    2.562438] mmc0: new SD card at address e624
[    2.570922] VAUX3: disabling
[    2.579101] mmcblk0: mmc0:e624 SD01G 968 MiB 
[    2.592956]  mmcblk0: p1 p2
[    2.973358] kjournald starting.  Commit interval 5 seconds
[    2.983367] EXT3-fs (mmcblk0p2): using internal journal
[    3.077545] EXT3-fs (mmcblk0p2): recovery complete
[    3.080169] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    3.084197] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    3.092407] devtmpfs: mounted
[    3.095733] Freeing unused kernel memory: 404K (c07c3000 - c0828000)
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
[    4.355224] udevd (858): /proc/858/oom_adj is deprecated, please use /proc/858/oom_score_adj instead.
Synthesizing the initial hotplug events
[   13.435852] random: nonblocking pool is initialized
[   17.545745] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Remounting root file system...
mount: according to mtab, /proc is already mounted on /proc

WARNING: Couldn't open directory /lib/modules/3.17.0-rc4-92410-g2ce7598: No such file or directory
FATAL: Could not open /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep.temp for writing: No such file or directory
root: mount: mount point /proc/bus/usb does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... modprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

ifconfig: SIOCGIFFLAGS: No such device
modprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

eth0      No such device

modprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

udhcpc: SIOCGIFINDEX: No such device
done.
Starting portmap daemon: portmap.
Tue Jul 22 00:18:00 UTC 2008
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1327: No soundcards found...
Starting Dropbear SSH server: modprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting system message bus: dbus.
Starting syslogd/klogd: start-stop-daemon: lseek: Invalid argument
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem: hcidmodprobe: FATAL: Could not load /lib/modules/3.17.0-rc4-92410-g2ce7598/modules.dep: No such file or directory

 hid2hci.

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: root
login[2223]: root login  on `ttyO2'

root@beagleboard:~# 
root@beagleboard:~# %% Start PM consolidated quick test


%% Preparation


root@beagleboard:~# 
root@beagleboard:~# mkdir -p /sys; mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@beagleboard:~# 
root@beagleboard:~# mkdir -p /debug; mount -t debugfs none /debug
mount: none already mounted or /debug busy
mount: according to mtab, debugfs is already mounted on /debug
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# echo 0 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# 
%% Baseline pm_debug count dump

cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1074,INA:0,ON:1075,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1074,INA:0,ON:1075,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:521,INA:553,ON:1075,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:521,INA:553,ON:1075,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (23)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo enabled >  $u/power/wakeup; done
root@beagleboard:~#
%% Start retention double suspend/resume UART wakeup test

 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo auto >  $u/power/control; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/wakeup; cat $u/power/wakeup; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/wakeup
enabled
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do ls -l $u/power/control; cat $u/power/control; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/control; cat $u/power/control; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/control
echo mem > /sys/power/state

auto
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   35.338653] PM: Syncing filesystems ... done.
[   35.535949] Freezing user space processes ... (elapsed 0.003 seconds) done.
[   35.543762] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   35.551422] Suspending console(s) (use no_console_suspend to debug)
[   35.593536] PM: suspend of devices complete after 30.456 msecs
[   35.604187] PM: late suspend of devices complete after 10.589 msecs
[   35.615905] PM: noirq suspend of devices complete after 11.688 msecs
[   35.616058] Disabling non-boot CPUs ...
[   35.616241] Successfully put all powerdomains to target state
[   35.622680] PM: noirq resume of devices complete after 6.347 msecs
[   35.631347] PM: early resume of devices complete after 6.958 msecs
[   35.787261] PM: resume of devices complete after 155.731 msecs
[   35.821807] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1205,INA:0,ON:1206,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1205,INA:0,ON:1206,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:623,INA:582,ON:1206,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:623,INA:582,ON:1206,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   37.834259] PM: Syncing filesystems ... done.
[   38.155578] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   38.161743] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   38.168212] Suspending console(s) (use no_console_suspend to debug)
[   38.198181] PM: suspend of devices complete after 18.554 msecs
[   38.208557] PM: late suspend of devices complete after 10.314 msecs
[   38.219482] PM: noirq suspend of devices complete after 10.894 msecs
[   38.219512] Disabling non-boot CPUs ...
[   38.219635] Successfully put all powerdomains to target state
[   38.225982] PM: noirq resume of devices complete after 6.286 msecs
[   38.234527] PM: early resume of devices complete after 7.080 msecs
[   38.386505] PM: resume of devices complete after 151.763 msecs
[   38.419982] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1320,INA:0,ON:1321,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1320,INA:0,ON:1321,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:729,INA:591,ON:1321,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:729,INA:591,ON:1321,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_susp
-sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1523,INA:0,ON:1524,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:25,INA:3,ON:29,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:28,INA:0,ON:29,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1523,INA:0,ON:1524,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:917,INA:606,ON:1524,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:917,INA:606,ON:1524,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   59.233551] PM: Syncing filesystems ... done.
[   59.598510] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   59.604675] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   59.611053] Suspending console(s) (use no_console_suspend to debug)
[   59.640960] PM: suspend of devices complete after 18.554 msecs
[   59.651214] PM: late suspend of devices complete after 10.223 msecs
[   59.662139] PM: noirq suspend of devices complete after 10.864 msecs
[   59.662170] Disabling non-boot CPUs ...
[   59.662322] Successfully put all powerdomains to target state
[   59.683471] PM: noirq resume of devices complete after 21.026 msecs
[   59.691925] PM: early resume of devices complete after 6.927 msecs
[   59.846343] PM: resume of devices complete after 154.266 msecs
[   59.879821] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:59,RET:1633,INA:0,ON:1693,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:1,RET:25,INA:3,ON:30,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1,RET:28,INA:0,ON:30,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:59,RET:1633,INA:0,ON:1693,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:1,RET:1057,INA:634,ON:1693,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:1,RET:1057,INA:634,ON:1693,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   61.877563] PM: Syncing filesystems ... done.
[   62.120391] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   62.126586] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   62.133056] Suspending console(s) (use no_console_suspend to debug)
[   62.163146] PM: suspend of devices complete after 18.646 msecs
[   62.173400] PM: late suspend of devices complete after 10.223 msecs
[   62.184356] PM: noirq suspend of devices complete after 10.894 msecs
[   62.184387] Disabling non-boot CPUs ...
[   62.184539] Successfully put all powerdomains to target state
[   62.205535] PM: noirq resume of devices complete after 20.904 msecs
[   62.214141] PM: early resume of devices complete after 7.080 msecs
[   62.366210] PM: resume of devices complete after 151.947 msecs
[   62.399658] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:178,RET:1633,INA:0,ON:1812,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:2,RET:25,INA:3,ON:31,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:2,RET:28,INA:0,ON:31,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:178,RET:1633,INA:0,ON:1812,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2,RET:1158,INA:651,ON:1812,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2,RET:1158,INA:651,ON:1812,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_susp
-sh: ./test_rootfs_access_nonexistent_file__off_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:369,RET:1633,INA:0,ON:2003,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:21,RET:25,INA:3,ON:50,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:21,RET:28,INA:0,ON:50,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:369,RET:1633,INA:0,ON:2003,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:21,RET:1324,INA:657,ON:2003,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:21,RET:1324,INA:657,ON:2003,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_dyn
-sh: ./test_rootfs_access_nonexistent_file__off_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test