U-Boot SPL 2014.04-cm-t54-1 (May 13 2014 - 13:59:07) OMAP5432 ES2.0 U-Boot 2014.04-cm-t54-1 (May 13 2014 - 13:59:07) CPU : OMAP5432 ES2.0 Board: CM-T54 I2C: ready DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 3  0 CM-T54 # CM-T54 # setenv bootargs 'console=ttyO3,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh' CM-T54 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap5-sbc-t54 Sending: Transfer complete - CRC mode, 8(SOH)/4334(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0043ba90 = 4438672 Bytes CM-T54 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4438608 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.17.0-rc5-92790-g9e82bf0 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Sep 15 14:37:13 MDT 2014 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: CompuLab SBC-T54 with CM-T54 [ 0.000000] Ignoring memory range 0xffffffff - 0x100000000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524031 [ 0.000000] free_area_init_node: node 0, pgdat c08c63c0, node_mem_map ed7f1000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2576 pages used for memmap [ 0.000000] HighMem zone: 329471 pages, LIFO batch:31 [ 0.000000] OMAP5432 ES2.0 [ 0.000000] PERCPU: Embedded 9 pages/cpu @ed790000 s14336 r8192 d14336 u36864 [ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522511 [ 0.000000] Kernel command line: console=ttyO3,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2044880K/2096124K available (5704K kernel code, 647K rwdata, 2208K rodata, 406K init, 8210K bss, 51244K reserved, 1317884K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07c2428 (7914 kB) [ 0.000000] .init : 0xc07c3000 - 0xc0828800 ( 406 kB) [ 0.000000] .data : 0xc082a000 - 0xc08cbe48 ( 648 kB) [ 0.000000] .bss : 0xc08cbe48 - 0xc10d0a20 (8211 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000366] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000401] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 2796202663936ns [ 0.000413] Switching to timer-based delay loop, resolution 162ns [ 0.001329] Console: colour dummy device 80x30 [ 0.001360] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001367] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001373] ... MAX_LOCK_DEPTH: 48 [ 0.001380] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001385] ... CLASSHASH_SIZE: 4096 [ 0.001391] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001397] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001402] ... CHAINHASH_SIZE: 32768 [ 0.001408] memory used by lock dependency info: 5167 kB [ 0.001414] per task-struct memory footprint: 1152 bytes [ 0.001445] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440) [ 0.001458] pid_max: default: 32768 minimum: 301 [ 0.001757] Security Framework initialized [ 0.001857] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001869] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003497] CPU: Testing write buffer coherency: ok [ 0.004246] /cpus/cpu@0 missing clock-frequency property [ 0.004265] /cpus/cpu@1 missing clock-frequency property [ 0.004277] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004329] Setting up static identity map for 0x80567e40 - 0x80567eb0 [ 0.008146] CPU1: Booted secondary processor [ 0.008180] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008603] Brought up 2 CPUs [ 0.008616] SMP: Total of 2 processors activated. [ 0.008623] CPU: All CPU(s) started in SVC mode. [ 0.010593] devtmpfs: initialized [ 0.020165] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.021397] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.022512] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.037339] ------------[ cut here ]------------ [ 0.037353] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2542 _init+0x3a0/0x3f0() [ 0.037360] omap_hwmod: dss_rfbi: doesn't have mpu register target base [ 0.037366] Modules linked in: [ 0.037379] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc5-92790-g9e82bf0 #1 [ 0.037400] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.037417] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.037430] [] (dump_stack) from [] (warn_slowpath_common+0x68/0x8c) [ 0.037443] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.037455] [] (warn_slowpath_fmt) from [] (_init+0x3a0/0x3f0) [ 0.037468] [] (_init) from [] (omap_hwmod_for_each+0x30/0x5c) [ 0.037480] [] (omap_hwmod_for_each) from [] (__omap_hwmod_setup_all+0x24/0x40) [ 0.037491] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x80/0x1c0) [ 0.037503] [] (do_one_initcall) from [] (kernel_init_freeable+0xf8/0x1c8) [ 0.037516] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.037529] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.037569] ---[ end trace 9e21a42924a3f820 ]--- [ 0.088875] omap_hwmod: dss_dispc: cannot be enabled for reset (3) [ 0.091425] omap_hwmod: dss_dsi1: cannot be enabled for reset (3) [ 0.093960] omap_hwmod: dss_dsi2: cannot be enabled for reset (3) [ 0.096489] omap_hwmod: dss_hdmi: cannot be enabled for reset (3) [ 0.150204] pinctrl core: initialized pinctrl subsystem [ 0.152063] regulator-dummy: no parameters [ 0.188266] NET: Registered protocol family 16 [ 0.192427] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.193897] cpuidle: using governor ladder [ 0.193914] cpuidle: using governor menu [ 0.211941] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.212587] OMAP GPIO hardware version 0.1 [ 0.213456] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.214723] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.216002] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.217287] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.218605] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.219908] gpiochip_add: registered GPIOs 192 to 223 on device: gpio [ 0.221204] gpiochip_add: registered GPIOs 224 to 255 on device: gpio [ 0.222084] platform 50000000.gpmc: Cannot lookup hwmod 'gpmc' [ 0.222266] omap-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 0.222283] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.222359] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.242285] No ATAGs? [ 0.242344] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.242353] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.244177] OMAP DMA hardware revision 0.0 [ 0.294319] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.294361] edma-dma-engine: probe of edma-dma-engine.0 failed with error -22 [ 0.321532] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.322188] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixed-regulator-mmcsd[0]' [ 0.322600] vmmcsd_fixed: 3300 mV [ 0.322885] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixed-regulator-vwlan-pdn[0]' - status (0) [ 0.323284] vwlan_pdn_fixed: 3300 mV [ 0.323367] reg-fixed-voltage fixed-regulator-vwlan-pdn: Failed to find supply vin [ 0.324669] reg-fixed-voltage fixed-regulator-vwlan-pdn: Failed to register regulator: -517 [ 0.324704] platform fixed-regulator-vwlan-pdn: Driver reg-fixed-voltage requests probe deferral [ 0.324811] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixed-regulator-vwlan[0]' - status (0) [ 0.325088] vwlan_fixed: 3300 mV [ 0.325175] reg-fixed-voltage fixed-regulator-vwlan: Failed to find supply vin [ 0.325473] reg-fixed-voltage fixed-regulator-vwlan: Failed to register regulator: -517 [ 0.325506] platform fixed-regulator-vwlan: Driver reg-fixed-voltage requests probe deferral [ 0.328605] SCSI subsystem initialized [ 0.329205] usbcore: registered new interface driver usbfs [ 0.329336] usbcore: registered new interface driver hub [ 0.329856] usbcore: registered new device driver usb [ 0.330167] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 0.330208] hsusb2_phy supply vcc not found, using dummy regulator [ 0.330611] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb3_phy[0]' - status (0) [ 0.330638] hsusb3_phy supply vcc not found, using dummy regulator [ 0.331331] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a002840/pinmux_i2c1_pins, deferring probe [ 0.331354] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.332199] omap_i2c 48072000.i2c: bus 1 rev0.12 at 100 kHz [ 0.333025] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz [ 0.333093] omap_i2c 4807a000.i2c: could not find pctldev for node /ocp/pinmux@4a002840/pinmux_i2c4_pins, deferring probe [ 0.333114] platform 4807a000.i2c: Driver omap_i2c requests probe deferral [ 0.333737] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 100 kHz [ 0.336845] Switched to clocksource arch_sys_counter [ 0.439154] NET: Registered protocol family 2 [ 0.440419] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.440614] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.442943] TCP: Hash tables configured (established 8192 bind 8192) [ 0.443063] TCP: reno registered [ 0.443083] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.443396] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.444364] NET: Registered protocol family 1 [ 0.445243] RPC: Registered named UNIX socket transport module. [ 0.445253] RPC: Registered udp transport module. [ 0.445261] RPC: Registered tcp transport module. [ 0.445268] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.446423] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.450474] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.453285] VFS: Disk quotas dquot_6.5.2 [ 0.453375] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.454837] NFS: Registering the id_resolver key type [ 0.455038] Key type id_resolver registered [ 0.455047] Key type id_legacy registered [ 0.455135] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.455525] msgmni has been set to 1451 [ 0.458861] bounce: pool size: 64 pages [ 0.458912] io scheduler noop registered [ 0.458928] io scheduler deadline registered [ 0.458990] io scheduler cfq registered (default) [ 0.464108] pinctrl-single 4a002840.pinmux: 219 pins at pa fc002840 size 438 [ 0.464444] pinctrl-single 4ae0c840.pinmux: 28 pins at pa fce0c840 size 56 [ 0.466185] pbias_mmc_omap5: 1800 <--> 3000 mV at 3000 mV [ 0.467407] abb_mpu: 1060 <--> 1250 mV [ 0.467999] abb_mm: 1025 <--> 1120 mV [ 0.469177] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.473310] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.473327] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.473618] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.474771] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.474787] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.474949] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.475756] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.475771] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.475930] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 0.476746] omap_uart 4806e000.serial: no wakeirq for uart0 [ 0.476761] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 0.476920] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.720009] console [ttyO3] enabled [ 1.724588] omap_uart 48066000.serial: no wakeirq for uart0 [ 1.730451] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48066000[0]' [ 1.740486] 48066000.serial: ttyO4 at MMIO 0x48066000 (irq = 137, base_baud = 3000000) is a OMAP UART4 [ 1.751522] omap_uart 48068000.serial: no wakeirq for uart0 [ 1.757387] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48068000[0]' [ 1.767394] 48068000.serial: ttyO5 at MMIO 0x48068000 (irq = 138, base_baud = 3000000) is a OMAP UART5 [ 1.793998] brd: module loaded [ 1.806598] loop: module loaded [ 1.812123] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.823908] usbcore: registered new interface driver asix [ 1.829686] usbcore: registered new interface driver ax88179_178a [ 1.836158] usbcore: registered new interface driver cdc_ether [ 1.842415] usbcore: registered new interface driver smsc95xx [ 1.848531] usbcore: registered new interface driver net1080 [ 1.854547] usbcore: registered new interface driver cdc_subset [ 1.860840] usbcore: registered new interface driver zaurus [ 1.866851] usbcore: registered new interface driver cdc_ncm [ 1.873414] usbcore: registered new interface driver cdc_wdm [ 1.879489] usbcore: registered new interface driver usb-storage [ 1.885916] usbcore: registered new interface driver usbtest [ 1.893293] mousedev: PS/2 mouse device common for all mice [ 1.901092] i2c /dev entries driver [ 1.906543] Driver for 1-wire Dallas network protocol. [ 1.914908] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.923387] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 1.933686] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 1.944458] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.951560] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.959068] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 1.968627] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.016940] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.026528] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.036375] omap_hsmmc 480ad000.mmc: unable to get vmmc regulator -517 [ 2.043321] platform 480ad000.mmc: Driver omap_hsmmc requests probe deferral [ 2.051392] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@1[0]' - status (0) [ 2.060911] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@1[0]' - status (0) [ 2.071374] ledtrig-cpu: registered to indicate activity on CPUs [ 2.078120] usbcore: registered new interface driver usbhid [ 2.083971] usbhid: USB HID core driver [ 2.089670] oprofile: using timer interrupt. [ 2.094487] TCP: cubic registered [ 2.097974] Initializing XFRM netlink socket [ 2.102502] NET: Registered protocol family 17 [ 2.107201] NET: Registered protocol family 15 [ 2.112024] Key type dns_resolver registered [ 2.116628] omap_vc_init_channel: No PMIC info for vdd_core [ 2.122477] omap_vp_init: No PMIC info for vdd_core [ 2.127593] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.133240] omap_vp_init: No PMIC info for vdd_mm [ 2.138174] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.143901] omap_vp_init: No PMIC info for vdd_mpu [ 2.149580] ThumbEE CPU extension supported. [ 2.154073] Registering SWP/SWPB emulation handler [ 2.159108] SmartReflex Class3 initialized [ 2.166412] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixed-regulator-vwlan-pdn[0]' - status (0) [ 2.177804] vwlan_pdn_fixed: 3300 mV [ 2.181719] reg-fixed-voltage fixed-regulator-vwlan-pdn: Failed to find supply vin [ 2.186835] mmc0: BKOPS_EN bit is not set [ 2.189561] mmc0: new high speed MMC card at address 0001 [ 2.197413] mmcblk0: mmc0:0001 SEM08G 7.28 GiB [ 2.197675] mmcblk0boot0: mmc0:0001 SEM08G partition 1 2.00 MiB [ 2.197922] mmcblk0boot1: mmc0:0001 SEM08G partition 2 2.00 MiB [ 2.209105] mmcblk0: unknown partition table [ 2.211299] mmcblk0boot1: unknown partition table [ 2.213355] mmcblk0boot0: unknown partition table [ 2.231786] reg-fixed-voltage fixed-regulator-vwlan-pdn: Failed to register regulator: -517 [ 2.240573] platform fixed-regulator-vwlan-pdn: Driver reg-fixed-voltage requests probe deferral [ 2.250084] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixed-regulator-vwlan[0]' - status (0) [ 2.260766] vwlan_fixed: 3300 mV [ 2.264314] reg-fixed-voltage fixed-regulator-vwlan: Failed to find supply vin [ 2.272201] reg-fixed-voltage fixed-regulator-vwlan: Failed to register regulator: -517 [ 2.280608] platform fixed-regulator-vwlan: Driver reg-fixed-voltage requests probe deferral [ 2.293699] palmas 0-0048: Irq flag is 0x00000000 [ 2.304744] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.351371] smps123: 600 <--> 1500 mV at 1060 mV [ 2.358412] smps45: 600 <--> 1310 mV at 1030 mV [ 2.365260] smps6: 1500 mV [ 2.370082] smps7: 1800 mV [ 2.375019] smps8: 600 <--> 1310 mV at 1040 mV [ 2.382558] smps9: 3300 mV [ 2.387028] smps10_out2: 5000 mV [ 2.391777] smps10_out1: 5000 mV [ 2.396249] ldo1: 1500 <--> 1800 mV [ 2.401804] ldo2: 3300 mV [ 2.406884] ldo3: 1500 mV [ 2.410999] ldo4: 1500 <--> 1800 mV [ 2.416895] ldo5: 1800 mV [ 2.423360] ldo6: 1200 mV [ 2.428017] ldo7: 2000 mV [ 2.433006] ldo8: 3000 mV [ 2.437941] ldo9: 1800 <--> 3000 mV at 900 mV [ 2.444674] ldoln: 1800 mV [ 2.449697] ldousb: 3250 mV [ 2.453739] REGEN1: no parameters [ 2.457708] REGEN2: no parameters [ 2.461845] regen3: no parameters [ 2.466063] SYSEN1: no parameters [ 2.469949] SYSEN2: no parameters [ 2.473655] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.481774] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 2.487990] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.498288] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.547195] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.556800] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.566618] omap_hsmmc 480ad000.mmc: unable to get vmmc regulator -517 [ 2.573614] platform 480ad000.mmc: Driver omap_hsmmc requests probe deferral [ 2.581183] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixed-regulator-vwlan-pdn[0]' - status (0) [ 2.592415] vwlan_pdn_fixed: 3300 mV [ 2.596357] vwlan_pdn_fixed: supplied by ldo2 [ 2.601365] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixed-regulator-vwlan[0]' - status (0) [ 2.612058] vwlan_fixed: 3300 mV [ 2.615642] vwlan_fixed: supplied by vwlan_pdn_fixed [ 2.621441] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.631004] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.650104] mmc1: new high speed SDHC card at address 0002 [ 2.656788] mmcblk1: mmc1:0002 00000 3.66 GiB [ 2.663134] mmcblk1: p1 p2 [ 2.677996] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.684554] sr_init: No PMIC hook to init smartreflex [ 2.690062] sr_init: platform driver register failed for SR [ 2.721412] ldo8: disabling