U-Boot 1.1.4 (Mar 18 2007 - 12:22:00)

OMAP2430C-GP revision 3, PRCM #5A
TI 2430SDP 1.1 Version + mDDR (Boot NOR)
DRAM:  128 MB
Flash: 192 MB
NAND:64 MB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  3  0 
OMAP243X SDP # 
OMAP243X SDP # setenv bootargs console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh
OMAP243X SDP # loady
## Ready for binary (ymodem) download to 0x80000000 at 115200 bps...
CSending: uImage-dtb.omap2430-sdp
Sending: 

Transfer complete
m - CRC mode, 5(SOH)/4328(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x0043a15f = 4432223 Bytes
OMAP243X SDP # bootm
## Booting image at 80000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4432159 Bytes =  4.2 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.17.0-rc5-12693-g9e82bf0 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Sep 16 10:07:57 MDT 2014
[    0.000000] CPU: ARMv6-compatible processor [4107b366] revision 6 (ARMv6TEJ), cr=00c5387d
[    0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI OMAP2430 SDP
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] cma: Reserved 16 MiB at 86800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 32512
[    0.000000] free_area_init_node: node 0, pgdat c08c63c0, node_mem_map c7df1000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32512 pages, LIFO batch:7
[    0.000000]   HighMem zone: 1048574 pages exceeds freesize 0
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP2430
[    0.000000] 
[    0.000000] PERCPU: Embedded 9 pages/cpu @c7d93000 s14336 r8192 d14336 u36864
[    0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32256
[    0.000000] Kernel command line: console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 94868K/130048K available (5704K kernel code, 647K rwdata, 2208K rodata, 406K init, 8210K bss, 35180K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07c2428   (7914 kB)
[    0.000000]       .init : 0xc07c3000 - 0xc0828800   ( 406 kB)
[    0.000000]       .data : 0xc082a000 - 0xc08cbe48   ( 648 kB)
[    0.000000]        .bss : 0xc08cbe48 - 0xc10d0a20   (8211 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 3.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] Clocking rate (Crystal/DPLL/MPU): 13.0/532/266 MHz
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000091] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000549] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
[    0.002624] Console: colour dummy device 80x30
[    0.002807] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.002838] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.002868] ... MAX_LOCK_DEPTH:          48
[    0.002899] ... MAX_LOCKDEP_KEYS:        8191
[    0.002929] ... CLASSHASH_SIZE:          4096
[    0.002960] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.002990] ... MAX_LOCKDEP_CHAINS:      65536
[    0.003021] ... CHAINHASH_SIZE:          32768
[    0.003051]  memory used by lock dependency info: 5167 kB
[    0.003082]  per task-struct memory footprint: 1152 bytes
[    0.003204] Calibrating delay loop... 262.96 BogoMIPS (lpj=1314816)
[    0.125152] pid_max: default: 32768 minimum: 301
[    0.126586] Security Framework initialized
[    0.127014] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.127105] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.136138] CPU: Testing write buffer coherency: ok
[    0.140716] missing device node for CPU 0
[    0.140777] CPU0: thread -1, cpu 0, socket -1, mpidr 4107b366
[    0.141052] Setting up static identity map for 0x80567e40 - 0x80567eb0
[    0.153839] Brought up 1 CPUs
[    0.153869] SMP: Total of 1 processors activated.
[    0.153930] CPU: All CPU(s) started in SVC mode.
[    0.165863] devtmpfs: initialized
[    0.191162] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
[    0.299926] omap_hwmod: usb_otg_hs: cannot be enabled for reset (3)
[    0.330810] pinctrl core: initialized pinctrl subsystem
[    0.340942] regulator-dummy: no parameters
[    0.489318] NET: Registered protocol family 16
[    0.521881] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.529815] cpuidle: using governor ladder
[    0.529937] cpuidle: using governor menu
[    0.598815] omap_gpio 4900c000.gpio: Could not get gpio dbck
[    0.603027] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.606475] OMAP GPIO hardware version 2.4
[    0.609344] omap_gpio 4900e000.gpio: Could not get gpio dbck
[    0.610687] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.615814] omap_gpio 49010000.gpio: Could not get gpio dbck
[    0.617553] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.622650] omap_gpio 49012000.gpio: Could not get gpio dbck
[    0.623962] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.629028] omap_gpio 480b6000.gpio: Could not get gpio dbck
[    0.630310] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[    0.635894] omap-gpmc 6e000000.gpmc: GPMC revision 3.0
[    0.636932] omap-gpmc 6e000000.gpmc: ethernet using bootloader timings on CS5
[    0.650909] No ATAGs?
[    0.651092] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.651153] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.657836] OMAP DMA hardware revision 4.0
[    0.746185] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[    0.746398] edma-dma-engine: probe of edma-dma-engine.0 failed with error -22
[    0.884429] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.899444] SCSI subsystem initialized
[    0.902465] usbcore: registered new interface driver usbfs
[    0.903106] usbcore: registered new interface driver hub
[    0.904663] usbcore: registered new device driver usb
[    0.911895] omap_i2c 48070000.i2c: bus 0 rev3.3 at 100 kHz
[    1.319915] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz
[    1.338470] Switched to clocksource 32k_counter
[    1.884979] NET: Registered protocol family 2
[    1.892059] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    1.892608] TCP bind hash table entries: 1024 (order: 3, 36864 bytes)
[    1.894012] TCP: Hash tables configured (established 1024 bind 1024)
[    1.894500] TCP: reno registered
[    1.894592] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.895355] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.899597] NET: Registered protocol family 1
[    1.905639] RPC: Registered named UNIX socket transport module.
[    1.905731] RPC: Registered udp transport module.
[    1.905761] RPC: Registered tcp transport module.
[    1.905792] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.910369] hw perfevents: enabled with armv6_1136 PMU driver, 3 counters available
[    1.929412] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.946105] VFS: Disk quotas dquot_6.5.2
[    1.946777] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.960418] NFS: Registering the id_resolver key type
[    1.961853] Key type id_resolver registered
[    1.961914] Key type id_legacy registered
[    1.962463] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.964508] msgmni has been set to 217
[    1.994659] io scheduler noop registered
[    1.994781] io scheduler deadline registered
[    1.995056] io scheduler cfq registered (default)
[    2.004669] pinctrl-single 49002030.pinmux: 340 pins at pa fb002030 size 340
[    2.013000] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV 
[    2.019409] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.051391] omap_uart 4806a000.serial: no wakeirq for uart0
[    2.051483] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]'
[    2.053039] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    2.872375] console [ttyO0] enabled
[    2.887573] omap_uart 4806c000.serial: no wakeirq for uart0
[    2.893554] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]'
[    2.904388] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    2.920593] omap_uart 4806e000.serial: no wakeirq for uart0
[    2.926696] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]'
[    2.937469] 4806e000.serial: ttyO2 at MMIO 0x4806e000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    2.981994] omap_rng 480a0000.rng: OMAP Random Number Generator ver. 50
[    3.103576] brd: module loaded
[    3.174346] loop: module loaded
[    3.250701] twl 1-0048: PIH (irq 23) chaining IRQs 274..282
[    3.257995] twl 1-0048: power (irq 279) chaining IRQs 282..289
[    3.295104] VAUX1: at 3000 mV 
[    3.311462] VAUX2_4030: at 2800 mV 
[    3.324279] VAUX3: at 2800 mV 
[    3.348785] VAUX4: at 1200 mV 
[    3.368530] VDD1: 600 <--> 1450 mV at 1300 mV 
[    3.384521] VDAC: 1800 mV 
[    3.400970] VIO: at 1800 mV 
[    3.414550] VINTANA1: 1500 mV 
[    3.428894] VINTANA2: at 2750 mV 
[    3.443298] VINTDIG: 1500 mV 
[    3.454467] VMMC1: 1850 <--> 3150 mV at 1850 mV 
[    3.469482] VMMC2: 1850 <--> 3150 mV at 2600 mV 
[    3.481964] VUSB1V5: 1500 mV 
[    3.491027] VUSB1V8: 1800 mV 
[    3.501068] VUSB3V1: 3100 mV 
[    3.518768] VPLL1: at 1300 mV 
[    3.534179] VPLL2: 1800 mV 
[    3.547149] VSIM: 1800 <--> 3000 mV at 1800 mV 
[    3.559722] twl4030_gpio twl4030-gpio: gpio (irq 274) chaining IRQs 290..307
[    3.570312] gpiochip_find_base: found new base at 494
[    3.578521] gpiochip_add: registered GPIOs 494 to 511 on device: twl4030
[    3.608734] mtdoops: mtd device (mtddev=name/number) must be supplied
[    3.636993] smc91x 8000300.ethernet (unnamed net_device) (uninitialized): smc91x: IOADDR c887a300 doesn't match configuration (0).
[    3.649505] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>
[    3.664489] smc91x 8000300.ethernet eth0: SMC91C94 (rev 9) at c887a300 IRQ 261
[    3.672271] 
[    3.673889] smc91x 8000300.ethernet eth0: Ethernet addr: 10:03:31:33:16:8f
[    3.687042] usbcore: registered new interface driver asix
[    3.693267] usbcore: registered new interface driver ax88179_178a
[    3.700408] usbcore: registered new interface driver cdc_ether
[    3.707427] usbcore: registered new interface driver smsc95xx
[    3.714050] usbcore: registered new interface driver net1080
[    3.720733] usbcore: registered new interface driver cdc_subset
[    3.727630] usbcore: registered new interface driver zaurus
[    3.734405] usbcore: registered new interface driver cdc_ncm
[    3.744354] usbcore: registered new interface driver cdc_wdm
[    3.751251] usbcore: registered new interface driver usb-storage
[    3.758514] usbcore: registered new interface driver usbtest
[    3.773406] mousedev: PS/2 mouse device common for all mice
[    3.782684] twl4030_keypad 48072000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48072000/twl@48/keypad
[    3.794952] twl4030_keypad 48072000.i2c:twl@48:keypad: Failed to build keymap
[    3.802795] twl4030_keypad: probe of 48072000.i2c:twl@48:keypad failed with error -2
[    3.844726] input: twl4030_pwrbutton as /devices/ocp/48072000.i2c/i2c-1/1-0048/48072000.i2c:twl@48:pwrbutton/input/input1
[    3.870208] twl_rtc 48072000.i2c:twl@48:rtc: Power up reset detected.
[    3.882965] twl_rtc 48072000.i2c:twl@48:rtc: Enabling TWL-RTC
[    3.921630] twl_rtc 48072000.i2c:twl@48:rtc: rtc core: registered 48072000.i2c:twl@48 as rtc0
[    3.938690] i2c /dev entries driver
[    3.953948] Driver for 1-wire Dallas network protocol.
[    3.977905] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]'
[    3.987731] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]'
[    4.057434] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]'
[    4.067230] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]'
[    4.078155] 480b4000.mmc supply vmmc not found, using dummy regulator
[    4.085876] omap_hsmmc 480b4000.mmc: could not set regulator OCR (-22)
[    4.094207] omap_hsmmc 480b4000.mmc: could not set regulator OCR (-22)
[    4.139770] ledtrig-cpu: registered to indicate activity on CPUs
[    4.148284] usbcore: registered new interface driver usbhid
[    4.154205] usbhid: USB HID core driver
[    4.163787] oprofile: using arm/armv6
[    4.170135] TCP: cubic registered
[    4.173706] Initializing XFRM netlink socket
[    4.178802] NET: Registered protocol family 17
[    4.183746] NET: Registered protocol family 15
[    4.189758] Key type dns_resolver registered
[    4.194976] SmartReflex Class3 initialized
[    4.245758] twl_rtc 48072000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    4.256042] sr_init: No PMIC hook to init smartreflex
[    4.262451] sr_init: platform driver register failed for SR
[    4.384033] VUSB3V1: disabling
[    4.390045] VUSB1V8: disabling
[    4.395721] VUSB1V5: disabling
[    4.419799] Waiting for root device /dev/mmcblk0p1...