怘€æ€˜€`3f<€fÀæøÀ̆ž?`??f?æžf<øž`??ð3ž<3ž<`<f<?˜à?Ì?Ã03††àÀÌà˜øÃÀÀ˜ø˜ž˜àÃóÀ˜àóÃ̘˜˜03à3f<<`<†žøž~<æžþž`?˜øfÃæàóæž?怘€à˜þž<`<†žøž~<˜æfÏàæžþž`?ø†<†žøž†øæžæž˜žfÏæàfü

U-Boot 2011.06-dirty (Sep 04 2012 - 17:06:58)

OMAP3530-GP ES3.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  256 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle Rev C1/C2/C3
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Die ID #5cf200030000000004013f7902012010
Hit any key to stop autoboot:  2  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # loady 0x81000000
## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
CSending: uImage-dtb.omap3-beagle
Sending: 

Transfer complete
yzModem - CRC mode, 6(SOH)/4699(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x00496da0 = 4812192 Bytes
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,230400n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # bootm 0x81000000
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4812128 Bytes = 4.6 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.0-rc1 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Oct 20 10:05:01 MDT 2014
[    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard
[    0.000000] cma: Reserved 16 MiB at 8e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000]   HighMem zone: 1048574 pages exceeds freesize 0
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp )
[    0.000000] PERCPU: Embedded 11 pages/cpu @cfc7c000 s14976 r8192 d21888 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO2,230400n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] allocated 522240 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 223440K/261120K available (6251K kernel code, 678K rwdata, 2320K rodata, 420K init, 8264K bss, 37680K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0866f1c   (8572 kB)
[    0.000000]       .init : 0xc0867000 - 0xc08d0000   ( 420 kB)
[    0.000000]       .data : 0xc08d0000 - 0xc0979810   ( 679 kB)
[    0.000000]        .bss : 0xc0979810 - 0xc118b868   (8265 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[    0.000000] OMAP clockevent source: timer12 at 32768 Hz
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000061] OMAP clocksource: 32k_counter at 32768 Hz
[    0.001586] Console: colour dummy device 80x30
[    0.001678] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001708] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001708] ... MAX_LOCK_DEPTH:          48
[    0.001739] ... MAX_LOCKDEP_KEYS:        8191
[    0.001739] ... CLASSHASH_SIZE:          4096
[    0.001770] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001770] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001800] ... CHAINHASH_SIZE:          32768
[    0.001800]  memory used by lock dependency info: 5167 kB
[    0.001831]  per task-struct memory footprint: 1152 bytes
[    0.001892] Calibrating delay loop... 466.94 BogoMIPS (lpj=2334720)
[    0.100891] pid_max: default: 32768 minimum: 301
[    0.101654] Security Framework initialized
[    0.101959] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.101989] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.107086] Initializing cgroup subsys memory
[    0.107238] Initializing cgroup subsys devices
[    0.107391] Initializing cgroup subsys freezer
[    0.107543] Initializing cgroup subsys blkio
[    0.107696] Initializing cgroup subsys perf_event
[    0.107849] CPU: Testing write buffer coherency: ok
[    0.110137] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.110473] Setting up static identity map for 0x805ec780 - 0x805ec7f0
[    0.117584] Brought up 1 CPUs
[    0.117645] SMP: Total of 1 processors activated.
[    0.117645] CPU: All CPU(s) started in SVC mode.
[    0.123687] devtmpfs: initialized
[    0.127716] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[    0.232269] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.235290] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.345489] pinctrl core: initialized pinctrl subsystem
[    0.350769] regulator-dummy: no parameters
[    0.479522] NET: Registered protocol family 16
[    0.490966] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.495788] cpuidle: using governor ladder
[    0.495819] cpuidle: using governor menu
[    0.496154] omap_l3_smx omap_l3_smx.0: couldn't request debug irq
[    0.496276] omap_l3_smx: probe of omap_l3_smx.0 failed with error -22
[    0.508514] Reprogramming SDRC clock to 332000000 Hz
[    0.524902] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
[    0.524993] platform 48310000.gpio: Driver omap_gpio requests probe deferral
[    0.530395] OMAP GPIO hardware version 2.5
[    0.548858] irq: no irq domain found for /ocp/pinmux@48002030 !
[    0.584350] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.599609] No ATAGs?
[    0.599670] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.604522] OMAP DMA hardware revision 4.0
[    0.654083] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[    0.654235] edma-dma-engine: probe of edma-dma-engine.0 failed with error -22
[    0.726867] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.728729] platform hsusb2_power_reg: Driver reg-fixed-voltage requests probe deferral
[    0.736236] SCSI subsystem initialized
[    0.737823] usbcore: registered new interface driver usbfs
[    0.738159] usbcore: registered new interface driver hub
[    0.738433] usbcore: registered new device driver usb
[    0.739685] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral
[    0.749084] omap_i2c 48070000.i2c: bus 0 rev3.3 at 2600 kHz
[    0.751220] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz
[    0.753234] omap_i2c 48060000.i2c: bus 2 rev3.3 at 100 kHz
[    0.761688] Switched to clocksource 32k_counter
[    1.046264] NET: Registered protocol family 2
[    1.049407] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    1.049713] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[    1.051147] TCP: Hash tables configured (established 2048 bind 2048)
[    1.051635] TCP: reno registered
[    1.051696] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.052093] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.054229] NET: Registered protocol family 1
[    1.057006] RPC: Registered named UNIX socket transport module.
[    1.057037] RPC: Registered udp transport module.
[    1.057067] RPC: Registered tcp transport module.
[    1.057098] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.059631] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    1.070465] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.070831] audit: initializing netlink subsys (disabled)
[    1.071228] audit: type=2000 audit(1.090:1): initialized
[    1.079254] VFS: Disk quotas dquot_6.5.2
[    1.079498] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.084259] NFS: Registering the id_resolver key type
[    1.084991] Key type id_resolver registered
[    1.085021] Key type id_legacy registered
[    1.085388] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.088500] msgmni has been set to 468
[    1.095855] io scheduler noop registered
[    1.095916] io scheduler deadline registered
[    1.096099] io scheduler cfq registered (default)
[    1.102325] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    1.103302] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    1.104980] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36
[    1.110778] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV 
[    1.114959] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.127258] omap_uart 4806a000.serial: no wakeirq for uart0
[    1.128265] omap_uart 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 192, base_baud = 3000000) is a OMAP UART0
[    1.131866] omap_uart 4806c000.serial: no wakeirq for uart0
[    1.132415] omap_uart 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 193, base_baud = 3000000) is a OMAP UART1
[    1.135742] omap_uart 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 194, base_baud = 3000000) is a OMAP UART2
[    1.572845] console [ttyO2] enabled
[    1.622009] brd: module loaded
[    1.649169] loop: module loaded
[    1.666351] twl 0-0048: PIH (irq 264) chaining IRQs 266..274
[    1.670104] twl 0-0048: power (irq 271) chaining IRQs 274..281
[    1.682983] VAUX1: at 3000 mV 
[    1.689941] vdd_ehci: 1800 mV 
[    1.695800] VAUX3: at 2800 mV 
[    1.701202] VAUX4: at 2800 mV 
[    1.706665] VDD1: 600 <--> 1450 mV at 1200 mV 
[    1.713012] VDAC: 1800 mV 
[    1.720123] VIO: at 1800 mV 
[    1.726043] VINTANA1: 1500 mV 
[    1.732360] VINTANA2: at 2750 mV 
[    1.738525] VINTDIG: 1500 mV 
[    1.743652] VMMC1: 1850 <--> 3150 mV at 3000 mV 
[    1.749725] VMMC2: 1850 <--> 3150 mV at 2600 mV 
[    1.755645] VUSB1V5: 1500 mV 
[    1.760040] VUSB1V8: 1800 mV 
[    1.764495] VUSB3V1: 3100 mV 
[    1.770385] VPLL1: at 1800 mV 
[    1.776855] VPLL2: 1800 mV 
[    1.782287] VSIM: 1800 <--> 3000 mV at 1800 mV 
[    1.788055] twl4030_gpio twl4030-gpio: gpio (irq 266) chaining IRQs 282..299
[    1.811248] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.830261] usbcore: registered new interface driver asix
[    1.833648] usbcore: registered new interface driver ax88179_178a
[    1.837219] usbcore: registered new interface driver cdc_ether
[    1.840789] usbcore: registered new interface driver smsc95xx
[    1.844268] usbcore: registered new interface driver net1080
[    1.847595] usbcore: registered new interface driver cdc_subset
[    1.851135] usbcore: registered new interface driver zaurus
[    1.854675] usbcore: registered new interface driver cdc_ncm
[    1.859893] usbcore: registered new interface driver cdc_wdm
[    1.863494] usbcore: registered new interface driver usb-storage
[    1.867126] usbcore: registered new interface driver usbtest
[    1.874847] mousedev: PS/2 mouse device common for all mice
[    1.879638] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
[    1.886077] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[    1.890075] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
[    1.899536] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input1
[    1.912139] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[    1.915985] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[    1.925567] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[    1.932067] i2c /dev entries driver
[    1.938598] Driver for 1-wire Dallas network protocol.
[    1.947265] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    2.024780] ledtrig-cpu: registered to indicate activity on CPUs
[    2.029144] usbcore: registered new interface driver usbhid
[    2.032318] usbhid: USB HID core driver
[    2.037963] oprofile: using arm/armv7
[    2.041229] TCP: cubic registered
[    2.043243] Initializing XFRM netlink socket
[    2.046325] NET: Registered protocol family 10
[    2.054016] sit: IPv6 over IPv4 tunneling driver
[    2.060607] NET: Registered protocol family 17
[    2.063323] NET: Registered protocol family 15
[    2.066375] Key type dns_resolver registered
[    2.069183] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    2.073211] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    2.076385] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    2.080169] omap2_set_init_voltage: unable to set vdd_core
[    2.086761] PM: no software I/O chain control; some wakeups may be lost
[    2.094146] ThumbEE CPU extension supported.
[    2.096557] Registering SWP/SWPB emulation handler
[    2.099212] SmartReflex Class3 initialized
[    2.124176] hsusb2_vbus: 3300 mV 
[    2.134155] input: gpio_keys as /devices/gpio_keys/input/input2
[    2.142333] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    2.147583] sr_init: No PMIC hook to init smartreflex
[    2.151184] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    2.156005] smartreflex smartreflex.0: omap_sr_probe: smartreflex_mpu_iva: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    2.164794] smartreflex: probe of smartreflex.0 failed with error -61
[    2.168609] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    2.173278] smartreflex smartreflex.1: omap_sr_probe: smartreflex_core: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    2.181518] smartreflex: probe of smartreflex.1 failed with error -61
[    2.185241] sr_init: platform driver register failed for SR
[    2.299957] hsusb2_vbus: disabling
[    2.303527] VUSB3V1: disabling
[    2.306182] VUSB1V8: disabling
[    2.308807] VUSB1V5: disabling
[    2.312042] VDAC: disabling
[    2.314880] VAUX3: disabling
[    2.324096] Waiting for root device /dev/mmcblk0p2...
[    2.340393] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.345397] mmc0: new SD card at address 8001
[    2.352111] mmcblk0: mmc0:8001 SD02G 1.89 GiB 
[    2.363006]  mmcblk0: p1 p2
[    3.727081] kjournald starting.  Commit interval 5 seconds
[    3.730682] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
[    3.915435] EXT3-fs (mmcblk0p2): using internal journal
[    3.923645] EXT3-fs (mmcblk0p2): recovery complete
[    3.926300] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    3.930236] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    3.940368] devtmpfs: mounted
[    3.943786] Freeing unused kernel memory: 420K (c0867000 - c08d0000)
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
[    5.362609] udevd (91): /proc/91/oom_adj is deprecated, please use /proc/91/oom_score_adj instead.
Synthesizing the initial hotplug events
[   19.568542] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Remounting root file system...
mount: according to mtab, /proc is already mounted on /proc

WARNING: Couldn't open directory /lib/modules/3.18.0-rc1: No such file or directory
FATAL: Could not open /lib/modules/3.18.0-rc1/modules.dep.temp for writing: No such file or directory
root: mount: mount point /proc/bus/usb does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... modprobe: FATAL: Could not load /lib/modules/3.18.0-rc1/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc1/modules.dep: No such file or directory

ifconfig: SIOCGIFFLAGS: No such device
modprobe: FATAL: Could not load /lib/modules/3.18.0-rc1/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc1/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc1/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc1/modules.dep: No such file or directory

eth0      No such device

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc1/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc1/modules.dep: No such file or directory

udhcpc: SIOCGIFINDEX: No such device
done.
Starting portmap daemon: portmap.
Tue Jul 22 00:18:00 UTC 2008
[   26.901489] random: nonblocking pool is initialized
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1327: No soundcards found...
Starting Dropbear SSH server: dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting system message bus: dbus.
Starting syslogd/klogd: start-stop-daemon: lseek: Invalid argument
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem:modprobe: FATAL: Could not load /lib/modules/3.18.0-rc1/modules.dep: No such file or directory
 hcid
 hid2hci.

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: root
login[1434]: root login  on `ttyO2'

root@beagleboard:~# 
root@beagleboard:~# %% Start PM consolidated quick test


%% Preparation


root@beagleboard:~# 
root@beagleboard:~# mkdir -p /sys; mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@beagleboard:~# 
root@beagleboard:~# mkdir -p /debug; mount -t debugfs none /debug
mount: none already mounted or /debug busy
mount: according to mtab, debugfs is already mounted on /debug
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# echo 0 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# 
%% Baseline pm_debug count dump

cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1155,INA:0,ON:1156,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1155,INA:0,ON:1156,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:590,INA:565,ON:1156,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:590,INA:565,ON:1156,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (22)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo enabled >  $u/power/wakeup; done
root@beagleboard:~#
%% Start retention double suspend/resume UART wakeup test

 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo auto >  $u/power/control; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/wakeup; cat $u/power/wakeup; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/wakeup
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do ls -l $u/power/control; cat $u/power/control; done

enabled
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/control; cat $u/power/control; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/control
auto
echo mem > /sys/power/state

-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/control
auto
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   38.127014] PM: Syncing filesystems ... done.
[   38.732666] Freezing user space processes ... (elapsed 0.003 seconds) done.
[   38.740173] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   38.748046] Suspending console(s) (use no_console_suspend to debug)
[   38.791290] PM: suspend of devices complete after 31.372 msecs
[   38.802032] PM: late suspend of devices complete after 10.681 msecs
[   38.813690] PM: noirq suspend of devices complete after 11.627 msecs
[   38.813842] Disabling non-boot CPUs ...
[   38.813903] Successfully put all powerdomains to target state
[   38.820587] PM: noirq resume of devices complete after 6.561 msecs
[   38.829223] PM: early resume of devices complete after 7.080 msecs
[   39.005157] PM: resume of devices complete after 175.659 msecs
[   39.040191] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1309,INA:0,ON:1310,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1309,INA:0,ON:1310,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:733,INA:576,ON:1310,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:733,INA:576,ON:1310,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   41.032104] PM: Syncing filesystems ... done.
[   41.728820] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   41.735473] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   41.742065] Suspending console(s) (use no_console_suspend to debug)
[   41.772857] PM: suspend of devices complete after 19.104 msecs
[   41.783416] PM: late suspend of devices complete after 10.498 msecs
[   41.794281] PM: noirq suspend of devices complete after 10.803 msecs
[   41.794281] Disabling non-boot CPUs ...
[   41.794311] Successfully put all powerdomains to target state
[   41.800872] PM: noirq resume of devices complete after 6.469 msecs
[   41.809295] PM: early resume of devices complete after 7.049 msecs
[   41.983886] PM: resume of devices complete after 174.438 msecs
[   42.017822] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1444,INA:0,ON:1445,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1444,INA:0,ON:1445,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:856,INA:588,ON:1445,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:856,INA:588,ON:1445,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_susp
-sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1744,INA:0,ON:1745,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:34,INA:9,ON:44,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:44,INA:0,ON:45,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1744,INA:0,ON:1745,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:1140,INA:604,ON:1745,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:1140,INA:604,ON:1745,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   62.823486] PM: Syncing filesystems ... done.
[   63.217498] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   63.223327] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   63.229797] Suspending console(s) (use no_console_suspend to debug)
[   63.260467] PM: suspend of devices complete after 18.890 msecs
[   63.271179] PM: late suspend of devices complete after 10.650 msecs
[   63.282073] PM: noirq suspend of devices complete after 10.864 msecs
[   63.282104] Disabling non-boot CPUs ...
[   63.282135] Successfully put all powerdomains to target state
[   63.302551] PM: noirq resume of devices complete after 20.324 msecs
[   63.311218] PM: early resume of devices complete after 7.293 msecs
[   63.483703] PM: resume of devices complete after 172.363 msecs
[   63.517700] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:70,RET:1871,INA:0,ON:1942,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:1,RET:34,INA:9,ON:45,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1,RET:44,INA:0,ON:46,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:70,RET:1871,INA:0,ON:1942,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:1,RET:1308,INA:632,ON:1942,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:1,RET:1308,INA:632,ON:1942,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   65.497711] PM: Syncing filesystems ... done.
[   66.192352] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   66.198303] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   66.204803] Suspending console(s) (use no_console_suspend to debug)
[   66.235473] PM: suspend of devices complete after 18.951 msecs
[   66.246124] PM: late suspend of devices complete after 10.620 msecs
[   66.257049] PM: noirq suspend of devices complete after 10.864 msecs
[   66.257049] Disabling non-boot CPUs ...
[   66.257080] Successfully put all powerdomains to target state
[   66.277313] PM: noirq resume of devices complete after 20.141 msecs
[   66.286010] PM: early resume of devices complete after 7.324 msecs
[   66.463134] PM: resume of devices complete after 176.971 msecs
[   66.497131] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:201,RET:1871,INA:0,ON:2073,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:2,RET:34,INA:9,ON:46,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:2,RET:44,INA:0,ON:47,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:201,RET:1871,INA:0,ON:2073,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2,RET:1424,INA:646,ON:2073,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2,RET:1424,INA:646,ON:2073,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_susp
-sh: ./test_rootfs_access_nonexistent_file__off_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:503,RET:1871,INA:0,ON:2375,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:24,RET:37,INA:16,ON:78,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:27,RET:51,INA:0,ON:79,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:503,RET:1871,INA:0,ON:2375,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:29,RET:1672,INA:673,ON:2375,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:29,RET:1672,INA:673,ON:2375,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_dyn
-sh: ./test_rootfs_access_nonexistent_file__off_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test