Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 4813492 (4972b4 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4813428 Bytes = 4.6 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.18.0-rc2-00467-gcac7f24 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Oct 27 00:26:25 MDT 2014 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c0976000, node_mem_map cfcf1000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] HighMem zone: 1048574 pages exceeds freesize 0 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 11 pages/cpu @cfc84000 s14976 r8192 d21888 u45056 [ 0.000000] pcpu-alloc: s14976 r8192 d21888 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] allocated 522240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 223472K/261120K available (6259K kernel code, 678K rwdata, 2324K rodata, 416K init, 8264K bss, 37648K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0869fb0 (8584 kB) [ 0.000000] .init : 0xc086a000 - 0xc08d2000 ( 416 kB) [ 0.000000] .data : 0xc08d2000 - 0xc097bbd8 ( 679 kB) [ 0.000000] .bss : 0xc097bbd8 - 0xc118dc28 (8265 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000031] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns [ 0.000136] OMAP clocksource: timer1 at 13000000 Hz [ 0.001485] Console: colour dummy device 80x30 [ 0.001571] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001589] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001604] ... MAX_LOCK_DEPTH: 48 [ 0.001618] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001632] ... CLASSHASH_SIZE: 4096 [ 0.001647] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001660] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001675] ... CHAINHASH_SIZE: 32768 [ 0.001689] memory used by lock dependency info: 5167 kB [ 0.001704] per task-struct memory footprint: 1152 bytes [ 0.001748] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.096207] pid_max: default: 32768 minimum: 301 [ 0.096862] Security Framework initialized [ 0.097141] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.097172] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101632] Initializing cgroup subsys memory [ 0.101766] Initializing cgroup subsys devices [ 0.101914] Initializing cgroup subsys freezer [ 0.102046] Initializing cgroup subsys blkio [ 0.102174] Initializing cgroup subsys perf_event [ 0.102303] CPU: Testing write buffer coherency: ok [ 0.104398] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.104613] Setting up static identity map for 0x805ee9c0 - 0x805eea30 [ 0.111088] Brought up 1 CPUs [ 0.111121] SMP: Total of 1 processors activated. [ 0.111139] CPU: All CPU(s) started in SVC mode. [ 0.116037] devtmpfs: initialized [ 0.120299] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.191681] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.193708] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.270635] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.291347] pinctrl core: initialized pinctrl subsystem [ 0.295659] regulator-dummy: no parameters [ 0.392187] NET: Registered protocol family 16 [ 0.401891] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.406184] cpuidle: using governor ladder [ 0.406388] cpuidle: using governor menu [ 0.406696] omap_l3_smx omap_l3_smx.0: couldn't request debug irq [ 0.406834] omap_l3_smx: probe of omap_l3_smx.0 failed with error -22 [ 0.417089] Reprogramming SDRC clock to 332000000 Hz [ 0.421582] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.433040] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.434437] OMAP GPIO hardware version 2.5 [ 0.436894] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.440206] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.443311] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.446543] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.449703] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.465292] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.466215] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.479075] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.482037] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.637496] No ATAGs? [ 0.637557] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.641453] OMAP DMA hardware revision 4.0 [ 0.681807] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.681933] edma-dma-engine: probe of edma-dma-engine.0 failed with error -22 [ 0.742542] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.743964] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.744852] hsusb1_vbus: 3300 mV [ 0.745509] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.746099] hsusb2_vbus: 3300 mV [ 0.746915] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.747559] vmmc: 3300 mV [ 0.748292] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.748359] platform wl12xx_vmmc2: Driver reg-fixed-voltage requests probe deferral [ 0.748589] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.749288] vwl1271_vaux2: 1800 mV [ 0.749931] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.750528] vddvario: no parameters [ 0.751073] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.751685] vdd33a: no parameters [ 0.758120] SCSI subsystem initialized [ 0.759425] usbcore: registered new interface driver usbfs [ 0.759716] usbcore: registered new interface driver hub [ 0.760051] usbcore: registered new device driver usb [ 0.760695] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.760763] platform hsusb1_phy: Driver usb_phy_generic requests probe deferral [ 0.760898] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.760949] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral [ 0.764642] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 0.767075] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.769052] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 0.776470] Switched to clocksource timer1 [ 1.015483] NET: Registered protocol family 2 [ 1.018473] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.018739] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.019898] TCP: Hash tables configured (established 2048 bind 2048) [ 1.020205] TCP: reno registered [ 1.020254] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.020580] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.022451] NET: Registered protocol family 1 [ 1.024948] RPC: Registered named UNIX socket transport module. [ 1.024987] RPC: Registered udp transport module. [ 1.025006] RPC: Registered tcp transport module. [ 1.025025] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.027705] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.036908] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.037245] audit: initializing netlink subsys (disabled) [ 1.037584] audit: type=2000 audit(1.030:1): initialized [ 1.044944] VFS: Disk quotas dquot_6.5.2 [ 1.045444] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.049654] NFS: Registering the id_resolver key type [ 1.050248] Key type id_resolver registered [ 1.050278] Key type id_legacy registered [ 1.050580] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.053398] msgmni has been set to 468 [ 1.060682] io scheduler noop registered [ 1.060735] io scheduler deadline registered [ 1.060907] io scheduler cfq registered (default) [ 1.066390] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.067294] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.072797] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV [ 1.076515] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.087317] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.087379] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.088059] omap_uart 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 225, base_baud = 3000000) is a OMAP UART0 [ 1.091288] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.091345] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.091979] omap_uart 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 226, base_baud = 3000000) is a OMAP UART1 [ 1.094160] omap_uart 49020000.serial: no wakeirq for uart0 [ 1.094212] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.094673] omap_uart 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 227, base_baud = 3000000) is a OMAP UART2 [ 2.174559] console [ttyO2] enabled [ 2.219649] brd: module loaded [ 2.244644] loop: module loaded [ 2.253175] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.284551] libphy: smsc911x-mdio: probed [ 2.289528] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 2.303036] smsc911x 2d000000.ethernet eth0: MAC Address: 8e:2b:92:49:dc:0b [ 2.356106] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 2.362600] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 2.373135] libphy: davinci_mdio.0: probed [ 2.377628] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 2.386256] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 2.396256] usbcore: registered new interface driver asix [ 2.402160] usbcore: registered new interface driver ax88179_178a [ 2.408823] usbcore: registered new interface driver cdc_ether [ 2.415227] usbcore: registered new interface driver smsc95xx [ 2.421549] usbcore: registered new interface driver net1080 [ 2.427747] usbcore: registered new interface driver cdc_subset [ 2.434150] usbcore: registered new interface driver zaurus [ 2.440404] usbcore: registered new interface driver cdc_ncm [ 2.448435] usbcore: registered new interface driver cdc_wdm [ 2.454693] usbcore: registered new interface driver usb-storage [ 2.461454] usbcore: registered new interface driver usbtest [ 2.471123] mousedev: PS/2 mouse device common for all mice [ 2.481781] i2c /dev entries driver [ 2.489836] Driver for 1-wire Dallas network protocol. [ 2.500331] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 2.511009] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.521501] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.576795] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.586506] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.597167] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 2.604836] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 2.613756] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/ledb[0]' - status (0) [ 2.623334] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/ledb[0]' - status (0) [ 2.634860] ledtrig-cpu: registered to indicate activity on CPUs [ 2.642229] usbcore: registered new interface driver usbhid [ 2.648162] usbhid: USB HID core driver [ 2.654737] oprofile: using arm/armv7 [ 2.659794] TCP: cubic registered [ 2.663340] Initializing XFRM netlink socket [ 2.668553] NET: Registered protocol family 10 [ 2.680128] sit: IPv6 over IPv4 tunneling driver [ 2.688879] NET: Registered protocol family 17 [ 2.693687] NET: Registered protocol family 15 [ 2.699062] Key type dns_resolver registered [ 2.704026] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 2.711697] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 2.717794] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.725075] omap2_set_init_voltage: unable to set vdd_core [ 2.732648] PM: no software I/O chain control; some wakeups may be lost [ 2.739698] pm: Failed to request pm_wkup irq [ 2.744333] ThumbEE CPU extension supported. [ 2.748937] Registering SWP/SWPB emulation handler [ 2.753978] SmartReflex Class3 initialized [ 2.775618] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 2.786756] vw1271: 1800 mV [ 2.791085] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.803099] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 2.814814] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.824502] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.940363] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.947102] sr_init: No PMIC hook to init smartreflex [ 2.952834] sr_init: platform driver register failed for SR [ 3.041785] hsusb2_vbus: disabling [ 3.045397] hsusb1_vbus: disabling [ 3.055199] Waiting for root device /dev/mmcblk0p2... [ 3.071159] mmc0: new high speed SDHC card at address b368 [ 3.081022] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 3.093803] mmcblk0: p1 p2 [ 3.183989] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 3.196686] devtmpfs: mounted [ 3.201186] Freeing unused kernel memory: 416K (c086a000 - c08d2000) /bin/sh: can't access tty; job control turned off # # #