怘€æ€˜€`3f<€fÀæøÀ̆ž?`??f?æžf<øž`??ð3ž<3ž<`<f<?˜à?Ì?Ã03††àÀÌà˜øÃÀÀ˜ø˜ž˜àÃóÀ˜àóÃ̘˜˜03à3f<<`<†žøž~<æžþž`?˜øfÃæàóæž?怘€à˜þž<`<†žøž~<˜æfÏàæžþž`?ø†<†žøž†øæžæž˜žfÏæàfü

U-Boot 2011.06-dirty (Sep 04 2012 - 17:06:58)

OMAP3530-GP ES3.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  256 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle Rev C1/C2/C3
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Die ID #5cf200030000000004013f7902012010
Hit any key to stop autoboot:  2  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # loady 0x81000000
## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
CSending: uImage-dtb.omap3-beagle
Sending: 

Transfer complete
zModem - CRC mode, 3(SOH)/4539(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x0046ec78 = 4648056 Bytes
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,230400n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # bootm 0x81000000
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4647992 Bytes = 4.4 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.0-rc7-105711-g009d043 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Dec 1 20:46:06 MST 2014
[    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard
[    0.000000] cma: Reserved 16 MiB at 0x8e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000]   HighMem zone: 1048574 pages exceeds freesize 0
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp )
[    0.000000] PERCPU: Embedded 11 pages/cpu @cfc7c000 s14976 r8192 d21888 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO2,230400n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] allocated 522240 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 223792K/261120K available (5989K kernel code, 670K rwdata, 2280K rodata, 416K init, 8226K bss, 37328K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc081b784   (8270 kB)
[    0.000000]       .init : 0xc081c000 - 0xc0884000   ( 416 kB)
[    0.000000]       .data : 0xc0884000 - 0xc092bbd8   ( 671 kB)
[    0.000000]        .bss : 0xc092bbd8 - 0xc1134500   (8227 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[    0.000000] OMAP clockevent source: timer12 at 32768 Hz
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000061] OMAP clocksource: 32k_counter at 32768 Hz
[    0.001556] Console: colour dummy device 80x30
[    0.001647] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001647] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001678] ... MAX_LOCK_DEPTH:          48
[    0.001678] ... MAX_LOCKDEP_KEYS:        8191
[    0.001708] ... CLASSHASH_SIZE:          4096
[    0.001708] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001739] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001739] ... CHAINHASH_SIZE:          32768
[    0.001770]  memory used by lock dependency info: 5167 kB
[    0.001800]  per task-struct memory footprint: 1152 bytes
[    0.001831] Calibrating delay loop... 466.94 BogoMIPS (lpj=2334720)
[    0.091491] pid_max: default: 32768 minimum: 301
[    0.092254] Security Framework initialized
[    0.092559] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092590] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.097564] Initializing cgroup subsys memory
[    0.097717] Initializing cgroup subsys devices
[    0.097869] Initializing cgroup subsys freezer
[    0.098022] Initializing cgroup subsys blkio
[    0.098175] Initializing cgroup subsys perf_event
[    0.098327] CPU: Testing write buffer coherency: ok
[    0.100555] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.100799] Setting up static identity map for 0x805ac300 - 0x805ac370
[    0.108062] Brought up 1 CPUs
[    0.108093] SMP: Total of 1 processors activated.
[    0.108123] CPU: All CPU(s) started in SVC mode.
[    0.113983] devtmpfs: initialized
[    0.117950] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[    0.223114] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.226104] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.336883] pinctrl core: initialized pinctrl subsystem
[    0.341979] regulator-dummy: no parameters
[    0.470794] NET: Registered protocol family 16
[    0.482269] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.487091] cpuidle: using governor ladder
[    0.487121] cpuidle: using governor menu
[    0.487457] omap_l3_smx omap_l3_smx.0: couldn't request debug irq
[    0.487579] omap_l3_smx: probe of omap_l3_smx.0 failed with error -22
[    0.499816] Reprogramming SDRC clock to 332000000 Hz
[    0.516479] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
[    0.516540] platform 48310000.gpio: Driver omap_gpio requests probe deferral
[    0.521911] OMAP GPIO hardware version 2.5
[    0.540557] irq: no irq domain found for /ocp/pinmux@48002030 !
[    0.576507] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.591949] No ATAGs?
[    0.592010] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.596893] OMAP DMA hardware revision 4.0
[    0.718109] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.720001] platform hsusb2_power_reg: Driver reg-fixed-voltage requests probe deferral
[    0.727416] SCSI subsystem initialized
[    0.728942] usbcore: registered new interface driver usbfs
[    0.729339] usbcore: registered new interface driver hub
[    0.729583] usbcore: registered new device driver usb
[    0.730804] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral
[    0.740112] omap_i2c 48070000.i2c: bus 0 rev3.3 at 2600 kHz
[    0.742309] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz
[    0.744323] omap_i2c 48060000.i2c: bus 2 rev3.3 at 100 kHz
[    0.752777] Switched to clocksource 32k_counter
[    1.043060] NET: Registered protocol family 2
[    1.046081] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    1.046386] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[    1.047790] TCP: Hash tables configured (established 2048 bind 2048)
[    1.048187] TCP: reno registered
[    1.048217] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.048614] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.050750] NET: Registered protocol family 1
[    1.053649] RPC: Registered named UNIX socket transport module.
[    1.053680] RPC: Registered udp transport module.
[    1.053710] RPC: Registered tcp transport module.
[    1.053741] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.056121] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    1.066986] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.067382] audit: initializing netlink subsys (disabled)
[    1.067687] audit: type=2000 audit(1.090:1): initialized
[    1.075775] VFS: Disk quotas dquot_6.5.2
[    1.076080] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.080474] NFS: Registering the id_resolver key type
[    1.081146] Key type id_resolver registered
[    1.081176] Key type id_legacy registered
[    1.081512] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.082733] msgmni has been set to 469
[    1.089874] io scheduler noop registered
[    1.089904] io scheduler deadline registered
[    1.090087] io scheduler cfq registered (default)
[    1.096282] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    1.097320] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    1.099029] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36
[    1.105072] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV 
[    1.109008] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.121154] omap_uart 4806a000.serial: no wakeirq for uart0
[    1.122222] omap_uart 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 192, base_baud = 3000000) is a OMAP UART0
[    1.125762] omap_uart 4806c000.serial: no wakeirq for uart0
[    1.126312] omap_uart 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 193, base_baud = 3000000) is a OMAP UART1
[    1.129760] omap_uart 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 194, base_baud = 3000000) is a OMAP UART2
[    1.560607] console [ttyO2] enabled
[    1.610076] brd: module loaded
[    1.638427] loop: module loaded
[    1.655731] twl 0-0048: PIH (irq 264) chaining IRQs 266..274
[    1.659484] twl 0-0048: power (irq 271) chaining IRQs 274..281
[    1.672027] VAUX1: at 3000 mV 
[    1.679046] vdd_ehci: 1800 mV 
[    1.685028] VAUX3: at 2800 mV 
[    1.690307] VAUX4: at 2800 mV 
[    1.695800] VDD1: 600 <--> 1450 mV at 1200 mV 
[    1.701690] VDAC: 1800 mV 
[    1.708740] VIO: at 1800 mV 
[    1.714721] VINTANA1: 1500 mV 
[    1.720489] VINTANA2: at 2750 mV 
[    1.726684] VINTDIG: 1500 mV 
[    1.731445] VMMC1: 1850 <--> 3150 mV at 3000 mV 
[    1.737548] VMMC2: 1850 <--> 3150 mV at 2600 mV 
[    1.743377] VUSB1V5: 1500 mV 
[    1.747619] VUSB1V8: 1800 mV 
[    1.751983] VUSB3V1: 3100 mV 
[    1.757751] VPLL1: at 1800 mV 
[    1.764221] VPLL2: 1800 mV 
[    1.769409] VSIM: 1800 <--> 3000 mV at 1800 mV 
[    1.775329] twl4030_gpio twl4030-gpio: gpio (irq 266) chaining IRQs 282..299
[    1.798583] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.817657] usbcore: registered new interface driver asix
[    1.820922] usbcore: registered new interface driver ax88179_178a
[    1.824645] usbcore: registered new interface driver cdc_ether
[    1.828216] usbcore: registered new interface driver smsc95xx
[    1.831604] usbcore: registered new interface driver net1080
[    1.835052] usbcore: registered new interface driver cdc_subset
[    1.838531] usbcore: registered new interface driver zaurus
[    1.842010] usbcore: registered new interface driver cdc_ncm
[    1.847259] usbcore: registered new interface driver cdc_wdm
[    1.850738] usbcore: registered new interface driver usb-storage
[    1.854522] usbcore: registered new interface driver usbtest
[    1.862182] mousedev: PS/2 mouse device common for all mice
[    1.867126] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
[    1.873504] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[    1.877502] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
[    1.887145] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input1
[    1.899169] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[    1.903808] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[    1.913360] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[    1.919677] i2c /dev entries driver
[    1.926361] Driver for 1-wire Dallas network protocol.
[    1.935058] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    2.006927] ledtrig-cpu: registered to indicate activity on CPUs
[    2.011260] usbcore: registered new interface driver usbhid
[    2.014434] usbhid: USB HID core driver
[    2.020080] oprofile: using arm/armv7
[    2.023468] TCP: cubic registered
[    2.025360] Initializing XFRM netlink socket
[    2.027923] NET: Registered protocol family 17
[    2.030517] NET: Registered protocol family 15
[    2.033660] Key type dns_resolver registered
[    2.036499] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    2.040466] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    2.043731] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    2.047515] omap2_set_init_voltage: unable to set vdd_core
[    2.054290] PM: no software I/O chain control; some wakeups may be lost
[    2.061096] ThumbEE CPU extension supported.
[    2.063629] Registering SWP/SWPB emulation handler
[    2.066284] SmartReflex Class3 initialized
[    2.091735] hsusb2_vbus: 3300 mV 
[    2.102203] input: gpio_keys as /devices/gpio_keys/input/input2
[    2.110504] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    2.115814] sr_init: No PMIC hook to init smartreflex
[    2.119384] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    2.124145] smartreflex smartreflex.0: omap_sr_probe: smartreflex_mpu_iva: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    2.133087] smartreflex: probe of smartreflex.0 failed with error -61
[    2.136932] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    2.141540] smartreflex smartreflex.1: omap_sr_probe: smartreflex_core: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    2.149749] smartreflex: probe of smartreflex.1 failed with error -61
[    2.153564] sr_init: platform driver register failed for SR
[    2.269287] hsusb2_vbus: disabling
[    2.273406] VUSB3V1: disabling
[    2.276458] VUSB1V8: disabling
[    2.280273] VUSB1V5: disabling
[    2.284027] VDAC: disabling
[    2.287109] VAUX3: disabling
[    2.288970] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.300445] Waiting for root device /dev/mmcblk0p2...
[    2.304626] mmc0: new SD card at address 8001
[    2.311065] mmcblk0: mmc0:8001 SD02G 1.89 GiB 
[    2.321807]  mmcblk0: p1 p2
[    3.710968] kjournald starting.  Commit interval 5 seconds
[    3.714691] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
[    3.901489] EXT3-fs (mmcblk0p2): using internal journal
[    3.909362] EXT3-fs (mmcblk0p2): recovery complete
[    3.912017] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    3.916076] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    3.926177] devtmpfs: mounted
[    3.929412] Freeing unused kernel memory: 416K (c081c000 - c0884000)
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
[    5.363647] udevd (90): /proc/90/oom_adj is deprecated, please use /proc/90/oom_score_adj instead.
Synthesizing the initial hotplug events
[   19.761932] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Remounting root file system...
mount: according to mtab, /proc is already mounted on /proc

WARNING: Couldn't open directory /lib/modules/3.18.0-rc7-105711-g009d043: No such file or directory
FATAL: Could not open /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep.temp for writing: No such file or directory
root: mount: mount point /proc/bus/usb does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... modprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

ifconfig: SIOCGIFFLAGS: No such device
modprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

eth0      No such device

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

udhcpc: SIOCGIFINDEX: No such device
done.
Starting portmap daemon: portmap.
Tue Jul 22 00:18:00 UTC 2008
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1327: No soundcards found...
[   27.623107] random: nonblocking pool is initialized
Starting Dropbear SSH server: modprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting system message bus: dbus.
Starting syslogd/klogd: start-stop-daemon: lseek: Invalid argument
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem: hcidmodprobe: FATAL: Could not load /lib/modules/3.18.0-rc7-105711-g009d043/modules.dep: No such file or directory

 hid2hci.

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: root
login[1430]: root login  on `ttyO2'

root@beagleboard:~# 
root@beagleboard:~# %% Start PM consolidated quick test


%% Preparation


root@beagleboard:~# 
root@beagleboard:~# mkdir -p /sys; mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@beagleboard:~# 
root@beagleboard:~# mkdir -p /debug; mount -t debugfs none /debug
mount: none already mounted or /debug busy
mount: according to mtab, debugfs is already mounted on /debug
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# echo 0 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# 
%% Baseline pm_debug count dump

cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1123,INA:0,ON:1124,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1123,INA:0,ON:1124,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:625,INA:498,ON:1124,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:625,INA:498,ON:1124,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (22)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo enabled >  $u/power/wakeup; done
root@beagleboard:~#
%% Start retention double suspend/resume UART wakeup test

 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo auto >  $u/power/control; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/wakeup; cat $u/power/wakeup; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/wakeup
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do ls -l $u/power/control; cat $u/power/control; done

enabled
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/control; cat $u/power/control; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/control
echo mem > /sys/power/state

auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/control
auto
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   39.254364] PM: Syncing filesystems ... done.
[   39.806335] Freezing user space processes ... (elapsed 0.003 seconds) done.
[   39.813842] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   39.821594] Suspending console(s) (use no_console_suspend to debug)
[   39.865447] PM: suspend of devices complete after 31.677 msecs
[   39.876403] PM: late suspend of devices complete after 10.894 msecs
[   39.888244] PM: noirq suspend of devices complete after 11.810 msecs
[   39.888427] Disabling non-boot CPUs ...
[   39.888458] Successfully put all powerdomains to target state
[   39.895446] PM: noirq resume of devices complete after 6.896 msecs
[   39.904266] PM: early resume of devices complete after 7.385 msecs
[   40.066101] PM: resume of devices complete after 161.560 msecs
[   40.101593] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1282,INA:0,ON:1283,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1282,INA:0,ON:1283,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:774,INA:508,ON:1283,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:774,INA:508,ON:1283,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   42.107238] PM: Syncing filesystems ... done.
[   42.831359] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   42.838073] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   42.844543] Suspending console(s) (use no_console_suspend to debug)
[   42.875640] PM: suspend of devices complete after 19.256 msecs
[   42.886627] PM: late suspend of devices complete after 10.955 msecs
[   42.897674] PM: noirq suspend of devices complete after 10.986 msecs
[   42.897705] Disabling non-boot CPUs ...
[   42.897705] Successfully put all powerdomains to target state
[   42.904418] PM: noirq resume of devices complete after 6.652 msecs
[   42.913146] PM: early resume of devices complete after 7.385 msecs
[   43.084991] PM: resume of devices complete after 171.722 msecs
[   43.119262] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1404,INA:0,ON:1405,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1404,INA:0,ON:1405,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:887,INA:517,ON:1405,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:887,INA:517,ON:1405,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_susp
-sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1715,INA:0,ON:1716,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:27,INA:9,ON:37,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:38,INA:0,ON:39,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1715,INA:0,ON:1716,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:1187,INA:528,ON:1716,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:1187,INA:528,ON:1716,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   63.920654] PM: Syncing filesystems ... done.
[   64.305023] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   64.311065] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   64.317626] Suspending console(s) (use no_console_suspend to debug)
[   64.348632] PM: suspend of devices complete after 19.226 msecs
[   64.359466] PM: late suspend of devices complete after 10.803 msecs
[   64.370513] PM: noirq suspend of devices complete after 10.986 msecs
[   64.370544] Disabling non-boot CPUs ...
[   64.370574] Successfully put all powerdomains to target state
[   64.391052] PM: noirq resume of devices complete after 20.355 msecs
[   64.399780] PM: early resume of devices complete after 7.232 msecs
[   64.574829] PM: resume of devices complete after 174.896 msecs
[   64.609130] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:70,RET:1838,INA:0,ON:1909,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:1,RET:27,INA:9,ON:38,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1,RET:38,INA:0,ON:40,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:70,RET:1838,INA:0,ON:1909,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:1,RET:1365,INA:542,ON:1909,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:1,RET:1365,INA:542,ON:1909,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   66.586700] PM: Syncing filesystems ... done.
[   67.312835] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   67.318817] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   67.325439] Suspending console(s) (use no_console_suspend to debug)
[   67.356475] PM: suspend of devices complete after 19.256 msecs
[   67.367401] PM: late suspend of devices complete after 10.894 msecs
[   67.378448] PM: noirq suspend of devices complete after 11.016 msecs
[   67.378479] Disabling non-boot CPUs ...
[   67.378479] Successfully put all powerdomains to target state
[   67.398864] PM: noirq resume of devices complete after 20.294 msecs
[   67.407623] PM: early resume of devices complete after 7.385 msecs
[   67.564666] PM: resume of devices complete after 156.890 msecs
[   67.598968] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:208,RET:1838,INA:0,ON:2047,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:2,RET:27,INA:9,ON:39,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:2,RET:38,INA:0,ON:41,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:208,RET:1838,INA:0,ON:2047,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2,RET:1491,INA:553,ON:2047,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2,RET:1491,INA:553,ON:2047,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_susp
-sh: ./test_rootfs_access_nonexistent_file__off_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:490,RET:1838,INA:0,ON:2329,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:28,RET:28,INA:15,ON:72,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:29,RET:44,INA:0,ON:74,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:490,RET:1838,INA:0,ON:2329,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:33,RET:1723,INA:572,ON:2329,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:33,RET:1723,INA:572,ON:2329,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_dyn
-sh: ./test_rootfs_access_nonexistent_file__off_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test