怘€æ€˜€`3f<€fÀæøÀ̆ž?`??f?æžf<øž`??ð3ž<3ž<`<f<?˜à?˜æ?˜à0˜˜fÃðÀ€˜0†xð˜à؞Øàó̘àó˜xÌ𘘘03`Ì3ž<~<àžf<ðffü3f<<`<†žøž~<æžþž`?˜øfÃæàóæž?怘€à˜þž<`<†žøž~<˜æfÏàæžþž`?ø†<†žøž†øæžæž˜žfÏæàfü

U-Boot 2011.06-00001-ge147603 (Sep 07 2012 - 22:19:41)

OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle xM Rev A
No EEPROM on expansion board
Die ID #2fa800001bf00000015739ea0702a01d
Hit any key to stop autoboot:  3  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # loady 0x81000000
## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
CSending: uImage-dtb.omap3-beagle-xm
Sending: 

Transfer complete
- CRC mode, 3(SOH)/4674(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x00490822 = 4786210 Bytes
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,230400 vram=12M root=/dev/mmcblk0p2 rw mmcrootfstype=ext3 rootwait earlyprintk ignore_loglevel
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # bootm 0x81000000
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4786146 Bytes = 4.6 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.0-rc2-14206-gb7392d2 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Fri Jan 2 20:50:40 MST 2015
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard xM
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] cma: Reserved 16 MiB at 0x9e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c096ecc0, node_mem_map dfa71000
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130816 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] PERCPU: Embedded 11 pages/cpu @df9f9000 s14912 r8192 d21952 u45056
[    0.000000] pcpu-alloc: s14912 r8192 d21952 u45056 alloc=11*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129664
[    0.000000] Kernel command line: console=ttyO2,230400 vram=12M root=/dev/mmcblk0p2 rw mmcrootfstype=ext3 rootwait earlyprintk ignore_loglevel
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 483392K/523264K available (6190K kernel code, 674K rwdata, 2356K rodata, 428K init, 8221K bss, 23488K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0860d4c   (8548 kB)
[    0.000000]       .init : 0xc0861000 - 0xc08cc000   ( 428 kB)
[    0.000000]       .data : 0xc08cc000 - 0xc0974ae8   ( 675 kB)
[    0.000000]        .bss : 0xc0974ae8 - 0xc117c250   (8222 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/331/600 MHz
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[    0.001190] Console: colour dummy device 80x30
[    0.001251] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001281] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001281] ... MAX_LOCK_DEPTH:          48
[    0.001312] ... MAX_LOCKDEP_KEYS:        8191
[    0.001312] ... CLASSHASH_SIZE:          4096
[    0.001312] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001342] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001342] ... CHAINHASH_SIZE:          32768
[    0.001373]  memory used by lock dependency info: 5167 kB
[    0.001373]  per task-struct memory footprint: 1152 bytes
[    0.001403] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696)
[    0.097534] pid_max: default: 32768 minimum: 301
[    0.098052] Security Framework initialized
[    0.098297] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.098327] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102508] Initializing cgroup subsys memory
[    0.102600] Initializing cgroup subsys devices
[    0.102722] Initializing cgroup subsys freezer
[    0.102844] Initializing cgroup subsys blkio
[    0.102966] Initializing cgroup subsys perf_event
[    0.103057] CPU: Testing write buffer coherency: ok
[    0.104797] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.104949] Setting up static identity map for 0x805dd850 - 0x805dd8c0
[    0.109832] Brought up 1 CPUs
[    0.109863] CPU: All CPU(s) started in SVC mode.
[    0.113922] devtmpfs: initialized
[    0.117004] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.198760] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.201110] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.310424] pinctrl core: initialized pinctrl subsystem
[    0.410644] NET: Registered protocol family 16
[    0.419860] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.422851] cpuidle: using governor ladder
[    0.422882] cpuidle: using governor menu
[    0.431213] Reprogramming SDRC clock to 331882352 Hz
[    0.443603] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
[    0.443664] platform 48310000.gpio: Driver omap_gpio requests probe deferral
[    0.446502] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.447875] OMAP GPIO hardware version 2.5
[    0.449859] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.452789] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.455566] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.458465] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[    0.461608] irq: no irq domain found for /ocp/pinmux@48002030 !
[    0.487915] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.490997] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
[    0.501525] No ATAGs?
[    0.501556] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.505401] OMAP DMA hardware revision 5.0
[    0.595550] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.597198] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb2_power_reg[0]' - status (-517)
[    0.597290] platform hsusb2_power_reg: Driver reg-fixed-voltage requests probe deferral
[    0.602966] SCSI subsystem initialized
[    0.603942] libata version 3.00 loaded.
[    0.605072] usbcore: registered new interface driver usbfs
[    0.605346] usbcore: registered new interface driver hub
[    0.605529] usbcore: registered new device driver usb
[    0.606231] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0)
[    0.606658] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral
[    0.613433] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
[    0.615112] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
[    0.616821] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
[    0.623138] Switched to clocksource 32k_counter
[    0.840667] NET: Registered protocol family 2
[    0.843200] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.843475] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[    0.845733] TCP: Hash tables configured (established 4096 bind 4096)
[    0.846038] TCP: reno registered
[    0.846069] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    0.846405] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    0.848052] NET: Registered protocol family 1
[    0.850158] RPC: Registered named UNIX socket transport module.
[    0.850189] RPC: Registered udp transport module.
[    0.850189] RPC: Registered tcp transport module.
[    0.850219] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.852203] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.860443] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.860809] audit: initializing netlink subsys (disabled)
[    0.861114] audit: type=2000 audit(0.840:1): initialized
[    0.867462] VFS: Disk quotas dquot_6.5.2
[    0.867675] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.870941] NFS: Registering the id_resolver key type
[    0.871429] Key type id_resolver registered
[    0.871459] Key type id_legacy registered
[    0.871704] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.877746] io scheduler noop registered
[    0.877807] io scheduler deadline registered
[    0.877929] io scheduler cfq registered (default)
[    0.882629] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    0.883605] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    0.885070] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
[    0.894805] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.903594] omap_uart 4806a000.serial: no wakeirq for uart0
[    0.903656] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]'
[    0.904418] omap_uart 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 192, base_baud = 3000000) is a OMAP UART0
[    0.907012] omap_uart 4806c000.serial: no wakeirq for uart0
[    0.907043] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]'
[    0.907440] omap_uart 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 193, base_baud = 3000000) is a OMAP UART1
[    0.909637] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]'
[    0.910034] omap_uart 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 194, base_baud = 3000000) is a OMAP UART2
[    1.381805] console [ttyO2] enabled
[    1.386352] omap_uart 49042000.serial: no wakeirq for uart0
[    1.389404] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49042000[0]'
[    1.394958] omap_uart 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 231, base_baud = 3000000) is a OMAP UART3
[    1.434173] brd: module loaded
[    1.455352] loop: module loaded
[    1.480041] twl 0-0048: PIH (irq 266) chaining IRQs 267..275
[    1.483734] twl 0-0048: power (irq 272) chaining IRQs 275..282
[    1.546783] twl4030_gpio twl4030-gpio: gpio (irq 267) chaining IRQs 283..300
[    1.551116] gpiochip_find_base: found new base at 492
[    1.554779] gpiochip_add: registered GPIOs 492 to 511 on device: twl4030
[    1.624298] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.639556] usbcore: registered new interface driver asix
[    1.642700] usbcore: registered new interface driver ax88179_178a
[    1.646331] usbcore: registered new interface driver cdc_ether
[    1.649719] usbcore: registered new interface driver smsc95xx
[    1.653137] usbcore: registered new interface driver net1080
[    1.656372] usbcore: registered new interface driver cdc_subset
[    1.659759] usbcore: registered new interface driver zaurus
[    1.663177] usbcore: registered new interface driver cdc_ncm
[    1.667938] usbcore: registered new interface driver cdc_wdm
[    1.671264] usbcore: registered new interface driver usb-storage
[    1.674926] usbcore: registered new interface driver usbtest
[    1.681488] mousedev: PS/2 mouse device common for all mice
[    1.686248] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
[    1.692474] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[    1.696502] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
[    1.705474] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input1
[    1.716796] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[    1.720550] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[    1.728790] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[    1.734710] i2c /dev entries driver
[    1.740020] Driver for 1-wire Dallas network protocol.
[    1.747497] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.754180] Driver 'mmcblk' needs updating - please use bus_type methods
[    1.759399] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]'
[    1.764465] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]'
[    1.814727] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/heartbeat[0]' - status (0)
[    1.820983] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/mmc[0]' - status (0)
[    1.827362] ledtrig-cpu: registered to indicate activity on CPUs
[    1.831420] usbcore: registered new interface driver usbhid
[    1.834533] usbhid: USB HID core driver
[    1.839355] oprofile: using arm/armv7
[    1.842285] TCP: cubic registered
[    1.844268] Initializing XFRM netlink socket
[    1.846771] NET: Registered protocol family 17
[    1.849273] NET: Registered protocol family 15
[    1.852142] Key type dns_resolver registered
[    1.854980] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    1.858886] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    1.862030] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    1.865844] omap2_set_init_voltage: unable to set vdd_core
[    1.873962] ThumbEE CPU extension supported.
[    1.876342] Registering SWP/SWPB emulation handler
[    1.878967] SmartReflex Class3 initialized
[    1.890747] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[    1.896728] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb2_power_reg[0]' - status (0)
[    1.905792] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0)
[    1.915344] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/user[0]' - status (0)
[    1.921874] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[    1.932281] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    1.937561] sr_init: No PMIC hook to init smartreflex
[    1.940979] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    1.945587] smartreflex smartreflex.0: omap_sr_probe: smartreflex_mpu_iva: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    1.954162] smartreflex: probe of smartreflex.0 failed with error -61
[    1.957885] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    1.962341] smartreflex smartreflex.1: omap_sr_probe: smartreflex_core: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    1.970397] smartreflex: probe of smartreflex.1 failed with error -61
[    1.974151] sr_init: platform driver register failed for SR
[    2.063446] hsusb2_vbus: disabling
[    2.067504] VPLL2: disabling
[    2.073364] VUSB3V1: disabling
[    2.075927] VUSB1V8: disabling
[    2.078247] VUSB1V5: disabling
[    2.080810] VDAC: disabling
[    2.083465] VAUX3: disabling
[    2.090454] Waiting for root device /dev/mmcblk0p2...
[    2.406829] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.414489] mmc0: new high speed SDHC card at address 1234
[    2.420440] mmcblk0: mmc0:1234 SA04G 3.68 GiB 
[    2.430938]  mmcblk0: p1 p2
[    4.564819] kjournald starting.  Commit interval 5 seconds
[    4.568267] EXT3-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[    4.976776] EXT3-fs (mmcblk0p2): using internal journal
[    4.988616] EXT3-fs (mmcblk0p2): recovery complete
[    4.991210] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    4.995178] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    5.005950] devtmpfs: mounted
[    5.008575] Freeing unused kernel memory: 428K (c0861000 - c08cc000)
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
[    6.184234] udevd (91): /proc/91/oom_adj is deprecated, please use /proc/91/oom_score_adj instead.
Synthesizing the initial hotplug events
[   15.805694] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Remounting root file system...
mount: according to mtab, /proc is already mounted on /proc

WARNING: Couldn't open directory /lib/modules/3.19.0-rc2-14206-gb7392d2: No such file or directory
FATAL: Could not open /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep.temp for writing: No such file or directory
root: mount: mount point /proc/bus/usb does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... modprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

ifconfig: SIOCGIFFLAGS: No such device
modprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

eth0      No such device

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

udhcpc: SIOCGIFINDEX: No such device
done.
Starting portmap daemon: portmap.
Tue Jul 22 00:18:00 UTC 2008
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1327: No soundcards found...
Starting Dropbear SSH server: [   25.289184] random: dropbear urandom read with 97 bits of entropy available
modprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting system message bus: dbus.
Starting syslogd/klogd: start-stop-daemon: lseek: Invalid argument
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem: hcidmodprobe: FATAL: Could not load /lib/modules/3.19.0-rc2-14206-gb7392d2/modules.dep: No such file or directory

 hid2hci.

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: root
login[1452]: root login  on `ttyO2'

root@beagleboard:~# 
root@beagleboard:~# %% Start PM consolidated quick test


%% Preparation


root@beagleboard:~# 
root@beagleboard:~# mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@beagleboard:~# 
root@beagleboard:~# mount -t debugfs none /debug
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/d[   31.939910] random: nonblocking pool is initialized
rivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# echo 0 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# 
%% Baseline pm_debug count dump

cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1179,INA:0,ON:1180,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1179,INA:0,ON:1180,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:653,INA:526,ON:1180,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:653,INA:526,ON:1180,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (22)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo enabled >  $u/power/wakeup; done
root@beagleboard:~#
%% Start retention double suspend/resume UART wakeup test

 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo auto >  $u/power/control; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/wakeup; cat $u/power/wakeup; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO3/power/wakeup
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do ls -l $u/power/control; cat $u/power/control; done

enabled
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/control; cat $u/power/control; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/control
auto
echo mem > /sys/power/state

-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO3/power/control
auto
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   36.367675] PM: Syncing filesystems ... done.
[   37.595489] PM: Preparing system for mem sleep
[   37.617462] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   37.624389] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   37.631530] PM: Entering mem sleep
[   37.633514] Suspending console(s) (use no_console_suspend to debug)
[   37.665740] PM: suspend of devices complete after 21.911 msecs
[   37.674652] PM: late suspend of devices complete after 8.880 msecs
[   37.684234] PM: noirq suspend of devices complete after 9.552 msecs
[   37.684387] Disabling non-boot CPUs ...
[   37.684417] Successfully put all powerdomains to target state
[   37.689819] PM: noirq resume of devices complete after 5.340 msecs
[   37.690002] In-band Error seen by MPU  at address 0
[   37.690002] ------------[ cut here ]------------
[   37.690063] WARNING: CPU: 0 PID: 1513 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124()
[   37.690063] Modules linked in:
[   37.690093] CPU: 0 PID: 1513 Comm: echo Not tainted 3.19.0-rc2-14206-gb7392d2 #1
[   37.690093] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[   37.690124] [<c00154b4>] (unwind_backtrace) from [<c0011b7c>] (show_stack+0x10/0x14)
[   37.690155] [<c0011b7c>] (show_stack) from [<c05d5210>] (dump_stack+0x80/0x9c)
[   37.690185] [<c05d5210>] (dump_stack) from [<c003e104>] (warn_slowpath_common+0x78/0xb4)
[   37.690185] [<c003e104>] (warn_slowpath_common) from [<c003e15c>] (warn_slowpath_null+0x1c/0x24)
[   37.690216] [<c003e15c>] (warn_slowpath_null) from [<c033b094>] (omap3_l3_app_irq+0xcc/0x124)
[   37.690246] [<c033b094>] (omap3_l3_app_irq) from [<c008d330>] (handle_irq_event_percpu+0x60/0x1f4)
[   37.690246] [<c008d330>] (handle_irq_event_percpu) from [<c008d500>] (handle_irq_event+0x3c/0x5c)
[   37.690277] [<c008d500>] (handle_irq_event) from [<c00901d8>] (handle_level_irq+0xb4/0x13c)
[   37.690277] [<c00901d8>] (handle_level_irq) from [<c008cbd8>] (generic_handle_irq+0x20/0x30)
[   37.690307] [<c008cbd8>] (generic_handle_irq) from [<c008ccf0>] (__handle_domain_irq+0x68/0xdc)
[   37.690338] [<c008ccf0>] (__handle_domain_irq) from [<c00086e4>] (omap_intc_handle_irq+0xb4/0xc4)
[   37.690338] [<c00086e4>] (omap_intc_handle_irq) from [<c05dba24>] (__irq_svc+0x44/0x5c)
[   37.690338] Exception stack(0xde723dd0 to 0xde723e18)
[   37.690368] 3dc0:                                     00000001 de53d5e8 00000000 de53d000
[   37.690368] 3de0: 60000013 de153860 de153860 c0921a98 00000000 c0945464 60000013 c09216b0
[   37.690399] 3e00: c0abe238 de723e18 c008371c c05db594 20000013 ffffffff
[   37.690429] [<c05dba24>] (__irq_svc) from [<c05db594>] (_raw_spin_unlock_irqrestore+0x34/0x44)
[   37.690429] [<c05db594>] (_raw_spin_unlock_irqrestore) from [<c0093e08>] (resume_irqs+0x84/0xdc)
[   37.690460] [<c0093e08>] (resume_irqs) from [<c03aea58>] (dpm_resume_noirq+0x210/0x2d4)
[   37.690490] [<c03aea58>] (dpm_resume_noirq) from [<c008881c>] (suspend_devices_and_enter+0x324/0x600)
[   37.690521] [<c008881c>] (suspend_devices_and_enter) from [<c0088ef4>] (pm_suspend+0x3fc/0x470)
[   37.690521] [<c0088ef4>] (pm_suspend) from [<c00874f4>] (state_store+0x68/0xb8)
[   37.690551] [<c00874f4>] (state_store) from [<c0316c34>] (kobj_attr_store+0x14/0x20)
[   37.690582] [<c0316c34>] (kobj_attr_store) from [<c01b1fcc>] (sysfs_kf_write+0x4c/0x50)
[   37.690612] [<c01b1fcc>] (sysfs_kf_write) from [<c01b13a4>] (kernfs_fop_write+0xf0/0x19c)
[   37.690612] [<c01b13a4>] (kernfs_fop_write) from [<c0149b98>] (vfs_write+0xa4/0x1ac)
[   37.690643] [<c0149b98>] (vfs_write) from [<c0149ebc>] (SyS_write+0x40/0x8c)
[   37.690643] [<c0149ebc>] (SyS_write) from [<c000e820>] (ret_fast_syscall+0x0/0x48)
[   37.690673] ---[ end trace 0082e61f4305834e ]---
[   37.697631] PM: early resume of devices complete after 5.889 msecs
[   38.089599] PM: resume of devices complete after 391.845 msecs
[   38.266204] PM: Finishing wakeup.
[   38.268005] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1316,INA:0,ON:1317,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1316,INA:0,ON:1317,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:781,INA:535,ON:1317,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:781,INA:535,ON:1317,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   40.896331] PM: Syncing filesystems ... done.
[   42.154327] PM: Preparing system for mem sleep
[   42.158966] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   42.165008] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   42.171264] PM: Entering mem sleep
[   42.173187] Suspending console(s) (use no_console_suspend to debug)
[   42.198699] PM: suspend of devices complete after 15.472 msecs
[   42.207458] PM: late suspend of devices complete after 8.697 msecs
[   42.216400] PM: noirq suspend of devices complete after 8.911 msecs
[   42.216400] Disabling non-boot CPUs ...
[   42.216430] Successfully put all powerdomains to target state
[   42.221649] PM: noirq resume of devices complete after 5.126 msecs
[   42.221771] In-band Error seen by MPU  at address 0
[   42.221801] ------------[ cut here ]------------
[   42.221832] WARNING: CPU: 0 PID: 1517 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124()
[   42.221832] Modules linked in:
[   42.221862] CPU: 0 PID: 1517 Comm: echo Tainted: G        W      3.19.0-rc2-14206-gb7392d2 #1
[   42.221862] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[   42.221923] [<c00154b4>] (unwind_backtrace) from [<c0011b7c>] (show_stack+0x10/0x14)
[   42.221954] [<c0011b7c>] (show_stack) from [<c05d5210>] (dump_stack+0x80/0x9c)
[   42.221954] [<c05d5210>] (dump_stack) from [<c003e104>] (warn_slowpath_common+0x78/0xb4)
[   42.221984] [<c003e104>] (warn_slowpath_common) from [<c003e15c>] (warn_slowpath_null+0x1c/0x24)
[   42.221984] [<c003e15c>] (warn_slowpath_null) from [<c033b094>] (omap3_l3_app_irq+0xcc/0x124)
[   42.222015] [<c033b094>] (omap3_l3_app_irq) from [<c008d330>] (handle_irq_event_percpu+0x60/0x1f4)
[   42.222045] [<c008d330>] (handle_irq_event_percpu) from [<c008d500>] (handle_irq_event+0x3c/0x5c)
[   42.222045] [<c008d500>] (handle_irq_event) from [<c00901d8>] (handle_level_irq+0xb4/0x13c)
[   42.222076] [<c00901d8>] (handle_level_irq) from [<c008cbd8>] (generic_handle_irq+0x20/0x30)
[   42.222076] [<c008cbd8>] (generic_handle_irq) from [<c008ccf0>] (__handle_domain_irq+0x68/0xdc)
[   42.222106] [<c008ccf0>] (__handle_domain_irq) from [<c00086e4>] (omap_intc_handle_irq+0xb4/0xc4)
[   42.222137] [<c00086e4>] (omap_intc_handle_irq) from [<c05dba24>] (__irq_svc+0x44/0x5c)
[   42.222137] Exception stack(0xde4eddd0 to 0xde4ede18)
[   42.222137] ddc0:                                     00000001 de7b7a68 00000000 de7b7480
[   42.222167] dde0: 60000013 de153860 de153860 c0921a98 00000000 c0945464 60000013 c09216b0
[   42.222167] de00: c0abe238 de4ede18 c008371c c05db594 20000013 ffffffff
[   42.222198] [<c05dba24>] (__irq_svc) from [<c05db594>] (_raw_spin_unlock_irqrestore+0x34/0x44)
[   42.222229] [<c05db594>] (_raw_spin_unlock_irqrestore) from [<c0093e08>] (resume_irqs+0x84/0xdc)
[   42.222259] [<c0093e08>] (resume_irqs) from [<c03aea58>] (dpm_resume_noirq+0x210/0x2d4)
[   42.222290] [<c03aea58>] (dpm_resume_noirq) from [<c008881c>] (suspend_devices_and_enter+0x324/0x600)
[   42.222290] [<c008881c>] (suspend_devices_and_enter) from [<c0088ef4>] (pm_suspend+0x3fc/0x470)
[   42.222320] [<c0088ef4>] (pm_suspend) from [<c00874f4>] (state_store+0x68/0xb8)
[   42.222351] [<c00874f4>] (state_store) from [<c0316c34>] (kobj_attr_store+0x14/0x20)
[   42.222381] [<c0316c34>] (kobj_attr_store) from [<c01b1fcc>] (sysfs_kf_write+0x4c/0x50)
[   42.222381] [<c01b1fcc>] (sysfs_kf_write) from [<c01b13a4>] (kernfs_fop_write+0xf0/0x19c)
[   42.222412] [<c01b13a4>] (kernfs_fop_write) from [<c0149b98>] (vfs_write+0xa4/0x1ac)
[   42.222412] [<c0149b98>] (vfs_write) from [<c0149ebc>] (SyS_write+0x40/0x8c)
[   42.222442] [<c0149ebc>] (SyS_write) from [<c000e820>] (ret_fast_syscall+0x0/0x48)
[   42.222442] ---[ end trace 0082e61f4305834f ]---
[   42.229370] PM: early resume of devices complete after 5.767 msecs
[   42.598297] PM: resume of devices complete after 368.804 msecs
[   42.775451] PM: Finishing wakeup.
[   42.777252] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1438,INA:0,ON:1439,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1438,INA:0,ON:1439,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:897,INA:541,ON:1439,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:897,INA:541,ON:1439,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_susp
-sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1648,INA:0,ON:1649,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:25,INA:3,ON:29,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:28,INA:0,ON:29,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1648,INA:0,ON:1649,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:1102,INA:546,ON:1649,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:1102,INA:546,ON:1649,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
[   63.227874] omap3_pm_off_mode_enable: Core OFF disabled due to errata i583
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   64.239624] PM: Syncing filesystems ... done.
[   65.065460] PM: Preparing system for mem sleep
[   65.070220] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   65.076385] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   65.082733] PM: Entering mem sleep
[   65.084594] Suspending console(s) (use no_console_suspend to debug)
[   65.112548] PM: suspend of devices complete after 17.364 msecs
[   65.122528] PM: late suspend of devices complete after 9.948 msecs
[   65.132690] PM: noirq suspend of devices complete after 10.101 msecs
[   65.132720] Disabling non-boot CPUs ...
[   65.132720] Successfully put all powerdomains to target state
[   65.138977] PM: noirq resume of devices complete after 6.195 msecs
[   65.139160] In-band Error seen by MPU  at address 0
[   65.139160] ------------[ cut here ]------------
[   65.139190] WARNING: CPU: 0 PID: 1559 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124()
[   65.139221] Modules linked in:
[   65.139221] CPU: 0 PID: 1559 Comm: echo Tainted: G        W      3.19.0-rc2-14206-gb7392d2 #1
[   65.139221] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[   65.139282] [<c00154b4>] (unwind_backtrace) from [<c0011b7c>] (show_stack+0x10/0x14)
[   65.139312] [<c0011b7c>] (show_stack) from [<c05d5210>] (dump_stack+0x80/0x9c)
[   65.139312] [<c05d5210>] (dump_stack) from [<c003e104>] (warn_slowpath_common+0x78/0xb4)
[   65.139343] [<c003e104>] (warn_slowpath_common) from [<c003e15c>] (warn_slowpath_null+0x1c/0x24)
[   65.139343] [<c003e15c>] (warn_slowpath_null) from [<c033b094>] (omap3_l3_app_irq+0xcc/0x124)
[   65.139373] [<c033b094>] (omap3_l3_app_irq) from [<c008d330>] (handle_irq_event_percpu+0x60/0x1f4)
[   65.139404] [<c008d330>] (handle_irq_event_percpu) from [<c008d500>] (handle_irq_event+0x3c/0x5c)
[   65.139404] [<c008d500>] (handle_irq_event) from [<c00901d8>] (handle_level_irq+0xb4/0x13c)
[   65.139434] [<c00901d8>] (handle_level_irq) from [<c008cbd8>] (generic_handle_irq+0x20/0x30)
[   65.139434] [<c008cbd8>] (generic_handle_irq) from [<c008ccf0>] (__handle_domain_irq+0x68/0xdc)
[   65.139465] [<c008ccf0>] (__handle_domain_irq) from [<c00086e4>] (omap_intc_handle_irq+0xb4/0xc4)
[   65.139495] [<c00086e4>] (omap_intc_handle_irq) from [<c05dba24>] (__irq_svc+0x44/0x5c)
[   65.139495] Exception stack(0xdd02ddd0 to 0xdd02de18)
[   65.139495] ddc0:                                     00000001 de7b7a68 00000000 de7b7480
[   65.139526] dde0: 60000153 de153860 de153860 c0921a98 00000000 c0945464 60000153 c09216b0
[   65.139526] de00: c0abe238 dd02de18 c008371c c05db594 20000153 ffffffff
[   65.139556] [<c05dba24>] (__irq_svc) from [<c05db594>] (_raw_spin_unlock_irqrestore+0x34/0x44)
[   65.139587] [<c05db594>] (_raw_spin_unlock_irqrestore) from [<c0093e08>] (resume_irqs+0x84/0xdc)
[   65.139617] [<c0093e08>] (resume_irqs) from [<c03aea58>] (dpm_resume_noirq+0x210/0x2d4)
[   65.139648] [<c03aea58>] (dpm_resume_noirq) from [<c008881c>] (suspend_devices_and_enter+0x324/0x600)
[   65.139648] [<c008881c>] (suspend_devices_and_enter) from [<c0088ef4>] (pm_suspend+0x3fc/0x470)
[   65.139678] [<c0088ef4>] (pm_suspend) from [<c00874f4>] (state_store+0x68/0xb8)
[   65.139709] [<c00874f4>] (state_store) from [<c0316c34>] (kobj_attr_store+0x14/0x20)
[   65.139709] [<c0316c34>] (kobj_attr_store) from [<c01b1fcc>] (sysfs_kf_write+0x4c/0x50)
[   65.139739] [<c01b1fcc>] (sysfs_kf_write) from [<c01b13a4>] (kernfs_fop_write+0xf0/0x19c)
[   65.139770] [<c01b13a4>] (kernfs_fop_write) from [<c0149b98>] (vfs_write+0xa4/0x1ac)
[   65.139770] [<c0149b98>] (vfs_write) from [<c0149ebc>] (SyS_write+0x40/0x8c)
[   65.139801] [<c0149ebc>] (SyS_write) from [<c000e820>] (ret_fast_syscall+0x0/0x48)
[   65.139801] ---[ end trace 0082e61f43058350 ]---
[   65.147979] PM: early resume of devices complete after 6.713 msecs
[   65.518188] PM: resume of devices complete after 370.086 msecs
[   65.695495] PM: Finishing wakeup.
[   65.697296] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:55,RET:1749,INA:0,ON:1805,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:26,INA:3,ON:30,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1,RET:28,INA:0,ON:30,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:55,RET:1749,INA:0,ON:1805,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:1,RET:1252,INA:551,ON:1805,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:1,RET:1252,INA:551,ON:1805,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   68.343109] PM: Syncing filesystems ... done.
[   69.591918] PM: Preparing system for mem sleep
[   69.596679] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   69.602844] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   69.609069] PM: Entering mem sleep
[   69.610931] Suspending console(s) (use no_console_suspend to debug)
[   69.638916] PM: suspend of devices complete after 17.425 msecs
[   69.648986] PM: late suspend of devices complete after 10.009 msecs
[   69.659149] PM: noirq suspend of devices complete after 10.131 msecs
[   69.659149] Disabling non-boot CPUs ...
[   69.659179] Successfully put all powerdomains to target state
[   69.665405] PM: noirq resume of devices complete after 6.134 msecs
[   69.665557] In-band Error seen by MPU  at address 0
[   69.665557] ------------[ cut here ]------------
[   69.665588] WARNING: CPU: 0 PID: 1561 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124()
[   69.665618] Modules linked in:
[   69.665618] CPU: 0 PID: 1561 Comm: echo Tainted: G        W      3.19.0-rc2-14206-gb7392d2 #1
[   69.665649] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[   69.665679] [<c00154b4>] (unwind_backtrace) from [<c0011b7c>] (show_stack+0x10/0x14)
[   69.665710] [<c0011b7c>] (show_stack) from [<c05d5210>] (dump_stack+0x80/0x9c)
[   69.665740] [<c05d5210>] (dump_stack) from [<c003e104>] (warn_slowpath_common+0x78/0xb4)
[   69.665740] [<c003e104>] (warn_slowpath_common) from [<c003e15c>] (warn_slowpath_null+0x1c/0x24)
[   69.665771] [<c003e15c>] (warn_slowpath_null) from [<c033b094>] (omap3_l3_app_irq+0xcc/0x124)
[   69.665802] [<c033b094>] (omap3_l3_app_irq) from [<c008d330>] (handle_irq_event_percpu+0x60/0x1f4)
[   69.665802] [<c008d330>] (handle_irq_event_percpu) from [<c008d500>] (handle_irq_event+0x3c/0x5c)
[   69.665832] [<c008d500>] (handle_irq_event) from [<c00901d8>] (handle_level_irq+0xb4/0x13c)
[   69.665832] [<c00901d8>] (handle_level_irq) from [<c008cbd8>] (generic_handle_irq+0x20/0x30)
[   69.665863] [<c008cbd8>] (generic_handle_irq) from [<c008ccf0>] (__handle_domain_irq+0x68/0xdc)
[   69.665863] [<c008ccf0>] (__handle_domain_irq) from [<c00086e4>] (omap_intc_handle_irq+0xb4/0xc4)
[   69.665893] [<c00086e4>] (omap_intc_handle_irq) from [<c05dba24>] (__irq_svc+0x44/0x5c)
[   69.665893] Exception stack(0xdd02ddd0 to 0xdd02de18)
[   69.665924] ddc0:                                     00000001 de7b7a68 00000000 de7b7480
[   69.665924] dde0: 60000153 de153860 de153860 c0921a98 00000000 c0945464 60000153 c09216b0
[   69.665954] de00: c0abe238 dd02de18 c008371c c05db594 20000153 ffffffff
[   69.665954] [<c05dba24>] (__irq_svc) from [<c05db594>] (_raw_spin_unlock_irqrestore+0x34/0x44)
[   69.665985] [<c05db594>] (_raw_spin_unlock_irqrestore) from [<c0093e08>] (resume_irqs+0x84/0xdc)
[   69.666015] [<c0093e08>] (resume_irqs) from [<c03aea58>] (dpm_resume_noirq+0x210/0x2d4)
[   69.666046] [<c03aea58>] (dpm_resume_noirq) from [<c008881c>] (suspend_devices_and_enter+0x324/0x600)
[   69.666076] [<c008881c>] (suspend_devices_and_enter) from [<c0088ef4>] (pm_suspend+0x3fc/0x470)
[   69.666076] [<c0088ef4>] (pm_suspend) from [<c00874f4>] (state_store+0x68/0xb8)
[   69.666107] [<c00874f4>] (state_store) from [<c0316c34>] (kobj_attr_store+0x14/0x20)
[   69.666137] [<c0316c34>] (kobj_attr_store) from [<c01b1fcc>] (sysfs_kf_write+0x4c/0x50)
[   69.666168] [<c01b1fcc>] (sysfs_kf_write) from [<c01b13a4>] (kernfs_fop_write+0xf0/0x19c)
[   69.666168] [<c01b13a4>] (kernfs_fop_write) from [<c0149b98>] (vfs_write+0xa4/0x1ac)
[   69.666198] [<c0149b98>] (vfs_write) from [<c0149ebc>] (SyS_write+0x40/0x8c)
[   69.666198] [<c0149ebc>] (SyS_write) from [<c000e820>] (ret_fast_syscall+0x0/0x48)
[   69.666229] ---[ end trace 0082e61f43058351 ]---
[   69.674163] PM: early resume of devices complete after 6.683 msecs
[   70.048309] PM: resume of devices complete after 373.992 msecs
[   70.225738] PM: Finishing wakeup.
[   70.227539] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:173,RET:1749,INA:0,ON:1923,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:27,INA:3,ON:31,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:2,RET:28,INA:0,ON:31,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:173,RET:1749,INA:0,ON:1923,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2,RET:1364,INA:556,ON:1923,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2,RET:1364,INA:556,ON:1923,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_susp
-sh: ./test_rootfs_access_nonexistent_file__off_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:371,RET:1749,INA:0,ON:2121,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:56,INA:4,ON:61,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:31,RET:29,INA:0,ON:61,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:371,RET:1749,INA:0,ON:2121,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:32,RET:1527,INA:561,ON:2121,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:32,RET:1527,INA:561,ON:2121,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_dyn
-sh: ./test_rootfs_access_nonexistent_file__off_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test