Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################### done Bytes transferred = 4782839 (48faf7 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4782775 Bytes = 4.6 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-rc4-118442-geaa27f3 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Jan 18 19:28:09 MST 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c096ed00, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 11 pages/cpu @cfc41000 s14912 r8192 d21952 u45056 [ 0.000000] pcpu-alloc: s14912 r8192 d21952 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223784K/261120K available (6190K kernel code, 674K rwdata, 2356K rodata, 428K init, 8221K bss, 20952K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0860d10 (8548 kB) [ 0.000000] .init : 0xc0861000 - 0xc08cc000 ( 428 kB) [ 0.000000] .data : 0xc08cc000 - 0xc0974b28 ( 675 kB) [ 0.000000] .bss : 0xc0974b28 - 0xc117c290 (8222 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000035] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns [ 0.000145] OMAP clocksource: timer1 at 13000000 Hz [ 0.001499] Console: colour dummy device 80x30 [ 0.001586] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001604] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001619] ... MAX_LOCK_DEPTH: 48 [ 0.001633] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001648] ... CLASSHASH_SIZE: 4096 [ 0.001661] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001675] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001689] ... CHAINHASH_SIZE: 32768 [ 0.001704] memory used by lock dependency info: 5167 kB [ 0.001719] per task-struct memory footprint: 1152 bytes [ 0.001761] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.096057] pid_max: default: 32768 minimum: 301 [ 0.096687] Security Framework initialized [ 0.096969] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.097000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101889] Initializing cgroup subsys memory [ 0.102021] Initializing cgroup subsys devices [ 0.102168] Initializing cgroup subsys freezer [ 0.102306] Initializing cgroup subsys blkio [ 0.102436] Initializing cgroup subsys perf_event [ 0.102570] CPU: Testing write buffer coherency: ok [ 0.104649] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.104861] Setting up static identity map for 0x805dd990 - 0x805dda00 [ 0.110673] Brought up 1 CPUs [ 0.110713] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.110732] CPU: All CPU(s) started in SVC mode. [ 0.115563] devtmpfs: initialized [ 0.119816] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.194454] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.196672] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.275570] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.294493] pinctrl core: initialized pinctrl subsystem [ 0.399584] NET: Registered protocol family 16 [ 0.409721] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.413314] cpuidle: using governor ladder [ 0.413367] cpuidle: using governor menu [ 0.423817] Reprogramming SDRC clock to 332000000 Hz [ 0.428319] In-band Error seen by USB_OTG at address 0 [ 0.428349] ------------[ cut here ]------------ [ 0.428394] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.428413] Modules linked in: [ 0.428449] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc4-118442-geaa27f3 #1 [ 0.428468] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.428531] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.428574] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.428608] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.428639] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.428668] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.428706] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x60/0x1f4) [ 0.428738] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.428771] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.428803] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.428832] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.428862] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.428892] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.428912] Exception stack(0xce095cc8 to 0xce095d10) [ 0.428939] 5cc0: 00000001 ce0930c8 00000000 ce092b40 60000153 ce02e260 [ 0.428965] 5ce0: ce02e260 00000000 00000014 60000153 ce02e238 00000000 00000000 ce095d10 [ 0.428986] 5d00: c008384c c05db6bc 20000153 ffffffff [ 0.429025] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.429058] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.429089] [] (__setup_irq) from [] (request_threaded_irq+0xa8/0x134) [ 0.429119] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.429159] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.429193] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 0.429225] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.429256] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.429285] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.429313] [] (bus_probe_device) from [] (device_add+0x2ec/0x4e8) [ 0.429356] [] (device_add) from [] (of_platform_device_create_pdata+0xec/0x148) [ 0.429389] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.429420] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.429462] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.429494] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.429526] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.429556] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.429585] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.429613] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.429644] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.429818] ---[ end trace 099d842851ff790a ]--- [ 0.430964] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.441809] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.443207] OMAP GPIO hardware version 2.5 [ 0.445397] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.449027] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.452232] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.455366] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.458680] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.475941] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.477043] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.489618] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.492642] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.650699] No ATAGs? [ 0.650753] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.655002] OMAP DMA hardware revision 4.0 [ 0.759788] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.761298] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.762785] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.764007] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.765187] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.766707] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.766780] platform wl12xx_vmmc2: Driver reg-fixed-voltage requests probe deferral [ 0.767033] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.768252] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/pinmux@48002030/pinmux_sb_t35_audio_amp, deferring probe [ 0.768311] platform audio_amp: Driver reg-fixed-voltage requests probe deferral [ 0.768546] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.769860] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.777411] SCSI subsystem initialized [ 0.778621] libata version 3.00 loaded. [ 0.779995] usbcore: registered new interface driver usbfs [ 0.780317] usbcore: registered new interface driver hub [ 0.780580] usbcore: registered new device driver usb [ 0.781264] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.781332] platform hsusb1_phy: Driver usb_phy_generic requests probe deferral [ 0.781474] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.781528] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral [ 0.782746] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c1_pins, deferring probe [ 0.782805] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.785471] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.785919] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c3_pins, deferring probe [ 0.785982] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.793619] Switched to clocksource timer1 [ 1.038720] NET: Registered protocol family 2 [ 1.041472] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.041732] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.042877] TCP: Hash tables configured (established 2048 bind 2048) [ 1.043382] TCP: reno registered [ 1.043440] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.043764] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.045578] NET: Registered protocol family 1 [ 1.048060] RPC: Registered named UNIX socket transport module. [ 1.048099] RPC: Registered udp transport module. [ 1.048118] RPC: Registered tcp transport module. [ 1.048136] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.050429] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.060122] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.060550] audit: initializing netlink subsys (disabled) [ 1.060946] audit: type=2000 audit(1.050:1): initialized [ 1.068540] VFS: Disk quotas dquot_6.5.2 [ 1.068822] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.072414] NFS: Registering the id_resolver key type [ 1.073010] Key type id_resolver registered [ 1.073038] Key type id_legacy registered [ 1.073607] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.081152] io scheduler noop registered [ 1.081209] io scheduler deadline registered [ 1.081384] io scheduler cfq registered (default) [ 1.087131] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.088034] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.098143] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.108487] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.108548] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.109450] omap_uart 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 225, base_baud = 3000000) is a OMAP UART0 [ 1.112417] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.112471] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.112932] omap_uart 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 226, base_baud = 3000000) is a OMAP UART1 [ 1.115859] omap_uart 49020000.serial: no wakeirq for uart0 [ 1.115913] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.116363] omap_uart 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 227, base_baud = 3000000) is a OMAP UART2 [ 2.532482] console [ttyO2] enabled [ 2.577705] brd: module loaded [ 2.603731] loop: module loaded [ 2.612947] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.647273] libphy: smsc911x-mdio: probed [ 2.652044] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 2.665728] smsc911x 2d000000.ethernet eth0: MAC Address: d2:4b:73:05:76:28 [ 2.723309] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 2.729807] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 2.740310] libphy: davinci_mdio.0: probed [ 2.744800] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 2.753430] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 2.763596] usbcore: registered new interface driver asix [ 2.769528] usbcore: registered new interface driver ax88179_178a [ 2.776210] usbcore: registered new interface driver cdc_ether [ 2.782623] usbcore: registered new interface driver smsc95xx [ 2.788912] usbcore: registered new interface driver net1080 [ 2.795114] usbcore: registered new interface driver cdc_subset [ 2.801525] usbcore: registered new interface driver zaurus [ 2.807806] usbcore: registered new interface driver cdc_ncm [ 2.815721] usbcore: registered new interface driver cdc_wdm [ 2.821976] usbcore: registered new interface driver usb-storage [ 2.828797] usbcore: registered new interface driver usbtest [ 2.838664] mousedev: PS/2 mouse device common for all mice [ 2.849582] i2c /dev entries driver [ 2.855823] Driver for 1-wire Dallas network protocol. [ 2.866352] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 2.875287] Driver 'mmcblk' needs updating - please use bus_type methods [ 2.884488] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.894945] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.944106] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.953869] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.964565] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 2.972275] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 2.981337] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/ledb[0]' - status (0) [ 2.992935] ledtrig-cpu: registered to indicate activity on CPUs [ 3.000349] usbcore: registered new interface driver usbhid [ 3.006298] usbhid: USB HID core driver [ 3.013039] oprofile: using arm/armv7 [ 3.018157] TCP: cubic registered [ 3.021705] Initializing XFRM netlink socket [ 3.026522] NET: Registered protocol family 17 [ 3.031308] NET: Registered protocol family 15 [ 3.036598] Key type dns_resolver registered [ 3.041501] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.049169] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.055292] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.062576] omap2_set_init_voltage: unable to set vdd_core [ 3.070159] PM: no software I/O chain control; some wakeups may be lost [ 3.077219] pm: Failed to request pm_wkup irq [ 3.081852] ThumbEE CPU extension supported. [ 3.086445] Registering SWP/SWPB emulation handler [ 3.091483] SmartReflex Class3 initialized [ 3.110594] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.123025] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.134496] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.146409] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.165835] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.177753] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.184841] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.194594] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.294537] mmc0: new high speed SDHC card at address b368 [ 3.307371] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.314116] sr_init: No PMIC hook to init smartreflex [ 3.319872] sr_init: platform driver register failed for SR [ 3.410656] ads7846-reg: disabling [ 3.414393] hsusb2_vbus: disabling [ 3.417969] hsusb1_vbus: disabling [ 3.424385] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 3.439122] mmcblk0: p1 p2 [ 3.471715] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 3.485602] devtmpfs: mounted [ 3.490162] Freeing unused kernel memory: 428K (c0861000 - c08cc000) /bin/sh: can't access tty; job control turned off # # #