U-Boot 1.1.4 (Mar 18 2007 - 12:22:00) OMAP2430C-GP revision 3, PRCM #5A TI 2430SDP 1.1 Version + mDDR (Boot NOR) DRAM: 128 MB Flash: 192 MB NAND:64 MB In: serial Out: serial Err: serial Hit any key to stop autoboot: 3  0 OMAP243X SDP # OMAP243X SDP # setenv bootargs console=ttyO0,115200n8 ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh OMAP243X SDP # loady ## Ready for binary (ymodem) download to 0x80000000 at 115200 bps... CSending: uImage-dtb.omap2430-sdp Sending: Transfer complete em - CRC mode, 5(SOH)/4655(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0048bd01 = 4766977 Bytes OMAP243X SDP # bootm ## Booting image at 80000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4766913 Bytes = 4.5 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-rc4-118442-geaa27f3 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Jan 18 19:28:09 MST 2015 [ 0.000000] CPU: ARMv6-compatible processor [4107b366] revision 6 (ARMv6TEJ), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI OMAP2430 SDP [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x86800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32512 [ 0.000000] free_area_init_node: node 0, pgdat c096ed00, node_mem_map c7dd1000 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] OMAP2430 [ 0.000000] [ 0.000000] PERCPU: Embedded 11 pages/cpu @c7d71000 s14912 r8192 d21952 u45056 [ 0.000000] pcpu-alloc: s14912 r8192 d21952 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32224 [ 0.000000] Kernel command line: console=ttyO0,115200n8 ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 94044K/130048K available (6190K kernel code, 674K rwdata, 2356K rodata, 428K init, 8221K bss, 19620K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0860d10 (8548 kB) [ 0.000000] .init : 0xc0861000 - 0xc08cc000 ( 428 kB) [ 0.000000] .data : 0xc08cc000 - 0xc0974b28 ( 675 kB) [ 0.000000] .bss : 0xc0974b28 - 0xc117c290 (8222 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 3.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 13.0/532/266 MHz [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000091] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000579] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present. [ 0.002990] Console: colour dummy device 80x30 [ 0.003173] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003204] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003234] ... MAX_LOCK_DEPTH: 48 [ 0.003265] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003295] ... CLASSHASH_SIZE: 4096 [ 0.003326] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003356] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003387] ... CHAINHASH_SIZE: 32768 [ 0.003417] memory used by lock dependency info: 5167 kB [ 0.003448] per task-struct memory footprint: 1152 bytes [ 0.003509] Calibrating delay loop... 262.96 BogoMIPS (lpj=1314816) [ 0.125152] pid_max: default: 32768 minimum: 301 [ 0.126281] Security Framework initialized [ 0.126861] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.126922] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.138366] Initializing cgroup subsys memory [ 0.138610] Initializing cgroup subsys devices [ 0.138916] Initializing cgroup subsys freezer [ 0.139221] Initializing cgroup subsys blkio [ 0.139526] Initializing cgroup subsys perf_event [ 0.139770] CPU: Testing write buffer coherency: ok [ 0.144592] missing device node for CPU 0 [ 0.144653] CPU0: thread -1, cpu 0, socket -1, mpidr 4107b366 [ 0.144927] Setting up static identity map for 0x805dd990 - 0x805dda00 [ 0.157745] Brought up 1 CPUs [ 0.157806] SMP: Total of 1 processors activated (262.96 BogoMIPS). [ 0.157836] CPU: All CPU(s) started in SVC mode. [ 0.169952] devtmpfs: initialized [ 0.177978] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2 [ 0.289978] omap_hwmod: usb_otg_hs: cannot be enabled for reset (3) [ 0.318267] pinctrl core: initialized pinctrl subsystem [ 0.484954] NET: Registered protocol family 16 [ 0.507843] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.515197] cpuidle: using governor ladder [ 0.515319] cpuidle: using governor menu [ 0.587158] omap_gpio 4900c000.gpio: Could not get gpio dbck [ 0.590850] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.594512] OMAP GPIO hardware version 2.4 [ 0.597473] omap_gpio 4900e000.gpio: Could not get gpio dbck [ 0.598968] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.604492] omap_gpio 49010000.gpio: Could not get gpio dbck [ 0.605712] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.611022] omap_gpio 49012000.gpio: Could not get gpio dbck [ 0.612335] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.617919] omap_gpio 480b6000.gpio: Could not get gpio dbck [ 0.619415] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.625396] omap-gpmc 6e000000.gpmc: GPMC revision 3.0 [ 0.642547] No ATAGs? [ 0.642761] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.642791] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.650146] OMAP DMA hardware revision 4.0 [ 0.868591] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.882446] SCSI subsystem initialized [ 0.887451] libata version 3.00 loaded. [ 0.890136] usbcore: registered new interface driver usbfs [ 0.890777] usbcore: registered new interface driver hub [ 0.891265] usbcore: registered new device driver usb [ 0.898406] omap_i2c 48070000.i2c: bus 0 rev3.3 at 100 kHz [ 0.911926] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.928527] Switched to clocksource 32k_counter [ 1.466857] NET: Registered protocol family 2 [ 1.473175] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 1.473724] TCP bind hash table entries: 1024 (order: 3, 36864 bytes) [ 1.475128] TCP: Hash tables configured (established 1024 bind 1024) [ 1.475677] TCP: reno registered [ 1.475769] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.476593] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.480957] NET: Registered protocol family 1 [ 1.485961] RPC: Registered named UNIX socket transport module. [ 1.486022] RPC: Registered udp transport module. [ 1.486053] RPC: Registered tcp transport module. [ 1.486083] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.491027] hw perfevents: enabled with armv6_1136 PMU driver, 3 counters available [ 1.510162] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.511016] audit: initializing netlink subsys (disabled) [ 1.511779] audit: type=2000 audit(1.500:1): initialized [ 1.526519] VFS: Disk quotas dquot_6.5.2 [ 1.527038] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.535888] NFS: Registering the id_resolver key type [ 1.537322] Key type id_resolver registered [ 1.537384] Key type id_legacy registered [ 1.538360] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.554290] io scheduler noop registered [ 1.554412] io scheduler deadline registered [ 1.554748] io scheduler cfq registered (default) [ 1.564788] pinctrl-single 49002030.pinmux: 340 pins at pa fb002030 size 340 [ 1.582580] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.603912] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.604003] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.605621] omap_uart 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 29, base_baud = 3000000) is a OMAP UART0 [ 2.434417] console [ttyO0] enabled [ 2.445190] omap_uart 4806c000.serial: no wakeirq for uart0 [ 2.451324] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 2.462219] omap_uart 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 30, base_baud = 3000000) is a OMAP UART1 [ 2.477050] omap_uart 4806e000.serial: no wakeirq for uart0 [ 2.483184] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 2.494049] omap_uart 4806e000.serial: ttyO2 at MMIO 0x4806e000 (irq = 31, base_baud = 3000000) is a OMAP UART2 [ 2.516479] omap_rng 480a0000.rng: OMAP Random Number Generator ver. 50 [ 2.604431] brd: module loaded [ 2.656402] loop: module loaded [ 2.697753] twl 1-0048: PIH (irq 216) chaining IRQs 217..225 [ 2.705139] twl 1-0048: power (irq 222) chaining IRQs 225..232 [ 2.874938] twl4030_gpio twl4030-gpio: gpio (irq 217) chaining IRQs 233..250 [ 2.884735] gpiochip_find_base: found new base at 494 [ 2.892242] gpiochip_add: registered GPIOs 494 to 511 on device: twl4030 [ 2.931152] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.956390] smc91x 8000300.ethernet: GPIO lookup for consumer power [ 2.963226] smc91x 8000300.ethernet: using device tree for GPIO lookup [ 2.970275] of_get_named_gpiod_flags: can't parse 'power-gpios' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 2.981689] of_get_named_gpiod_flags: can't parse 'power-gpio' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 2.992980] smc91x 8000300.ethernet: using lookup tables for GPIO lookup [ 3.000579] smc91x 8000300.ethernet: lookup for GPIO power failed [ 3.007080] smc91x 8000300.ethernet: GPIO lookup for consumer reset [ 3.013854] smc91x 8000300.ethernet: using device tree for GPIO lookup [ 3.020874] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 3.032287] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 3.043579] smc91x 8000300.ethernet: using lookup tables for GPIO lookup [ 3.050781] smc91x 8000300.ethernet: lookup for GPIO reset failed [ 3.057647] smc91x 8000300.ethernet (unnamed net_device) (uninitialized): smc91x: IOADDR c887a300 doesn't match configuration (0). [ 3.070220] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre [ 3.085235] smc91x 8000300.ethernet eth0: SMC91C94 (rev 9) at c887a300 IRQ 197 [ 3.093048] [ 3.094665] smc91x 8000300.ethernet eth0: Ethernet addr: 10:03:31:33:16:8f [ 3.107543] usbcore: registered new interface driver asix [ 3.114013] usbcore: registered new interface driver ax88179_178a [ 3.121093] usbcore: registered new interface driver cdc_ether [ 3.128082] usbcore: registered new interface driver smsc95xx [ 3.134674] usbcore: registered new interface driver net1080 [ 3.141265] usbcore: registered new interface driver cdc_subset [ 3.148193] usbcore: registered new interface driver zaurus [ 3.154937] usbcore: registered new interface driver cdc_ncm [ 3.165527] usbcore: registered new interface driver cdc_wdm [ 3.172393] usbcore: registered new interface driver usb-storage [ 3.179626] usbcore: registered new interface driver usbtest [ 3.193206] mousedev: PS/2 mouse device common for all mice [ 3.202423] twl4030_keypad 48072000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48072000/twl@48/keypad [ 3.214752] twl4030_keypad 48072000.i2c:twl@48:keypad: Failed to build keymap [ 3.222625] twl4030_keypad: probe of 48072000.i2c:twl@48:keypad failed with error -2 [ 3.241973] input: twl4030_pwrbutton as /devices/platform/ocp/48072000.i2c/i2c-1/1-0048/48072000.i2c:twl@48:pwrbutton/input/input1 [ 3.264678] twl_rtc 48072000.i2c:twl@48:rtc: Power up reset detected. [ 3.272399] twl_rtc 48072000.i2c:twl@48:rtc: Enabling TWL-RTC [ 3.294158] twl_rtc 48072000.i2c:twl@48:rtc: rtc core: registered 48072000.i2c:twl@48 as rtc0 [ 3.307098] i2c /dev entries driver [ 3.318298] Driver for 1-wire Dallas network protocol. [ 3.336761] Driver 'mmcblk' needs updating - please use bus_type methods [ 3.347442] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.357269] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.418945] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.428741] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.440002] 480b4000.mmc supply vmmc not found, using dummy regulator [ 3.447540] omap_hsmmc 480b4000.mmc: could not set regulator OCR (-22) [ 3.456054] omap_hsmmc 480b4000.mmc: could not set regulator OCR (-22) [ 3.501129] ledtrig-cpu: registered to indicate activity on CPUs [ 3.509490] usbcore: registered new interface driver usbhid [ 3.515411] usbhid: USB HID core driver [ 3.524963] oprofile: using arm/armv6 [ 3.531402] TCP: cubic registered [ 3.535064] Initializing XFRM netlink socket [ 3.540222] NET: Registered protocol family 17 [ 3.545166] NET: Registered protocol family 15 [ 3.551239] Key type dns_resolver registered [ 3.556427] SmartReflex Class3 initialized [ 3.594818] twl_rtc 48072000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.605133] sr_init: No PMIC hook to init smartreflex [ 3.611480] sr_init: platform driver register failed for SR [ 3.748352] VUSB3V1: disabling [ 3.754394] VUSB1V8: disabling [ 3.760681] VUSB1V5: disabling [ 3.783996] Waiting for root device /dev/mmcblk0p1... %% Start PM consolidated quick test (retention only) %% Preparation